Action Center does not recognize Kaspersky Anti-virus
Use me Kaspersky Anti-virus.
This isn't a security problem and not a Windows problem but a problem of Kaspersky. Is best to consult the FAQ of Kaspersky or send a note to the Kaspersky technical support.
Tags: Windows
Similar Questions
-
Security Center does not recognize my anti-virus program
The other day, my Security Center says virus protection not found. Today, I installed Norton is a new virus for me protection program, which the Security Center always says not found virus protection.
How can I do so it will recognize that I don't have anti-virus protection?
Please check this solution:http://support.Microsoft.com/kb/952923 -
Action Center does not detect Avast Anti-virus after system restore
I had to do a system restore to a point a few days earlier due to some bad drivers. After you get things restored, I found that the Action Center are most recognized Avast (free version) as my anti-virus software. It is fully updated and running and work very well. I tried several suggestions available online, including suggestions on the avast website to check the consistency of the standard WMI (https://support.avast.com/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=580&nav=0, 1.20). I also checked that there isn't an underlying virus and tried to 'fix' the installation of Avast in the menu programs and features, as well as a few reboots. Nothing has worked. This PC is only about two weeks, and everything worked well until the bad drivers and system restore.
I came here as a last resort... Any help is appreciated.
Don't know if this will work for you, but last night I ran a scan with Avast and this morning that action Center of the window said Avast was running but according to Avast started it was running. Then I disabled the Avast shields then turned on their return and Action Center were more like Avast is not running
-
Windows Security Center does not recognize my Anti Virus
Mr President, I have Windows XP Home Edition 2002, it's completely up to date with your updates. ESET NOD 32 is installed and registered properly my system antivirus. About 2-3 months ago, I installed one of your updates and noticed after completing the red shield appeared informing me that he couldn't dectet my antivirus program, (my antivirus program is running correctly - it was the first time this has happened). A few days later, the Red Shield has disappeared and on control of the Security Center, he said he was grateful now my antivirus. 2 days ago I installed again your updates, and it's the same thing. I contacted ESET to know that if my Antivirus system works properly, they said it was and suggested that SP2 is damaged and I need to download. I tried and it doesn't let me do as my system is completely up to date. When I started my computer today the red shield appeared with the same message. I did a scan of my complete system, without defects have appeared. Could you please help me in this case. Robert.
Hello Tony,.
Follow these steps and check if it works:
a. press Start > type in the box "services.msc" and press Ok
b. in the list of services, double-click on Windows Management Instrumentation. Click stop , and then click OK.
c. now locate the folder C:-WINDOWS-system32-wbem------repository and delete it.
d. restart the services Windows Management Instrumentation and restart your computer
Let us know if that helps.
-
Security Center does not recognize the Windows Security Essentials
Windows Security Essentials does not seem to register with Security Center. Security Center reports that no Virus protection is enabled.
1. I installed Windows XP 32 - bit WGA, activated the product and updated to SP3.
2 security Center starts giving Windows security alerts for Virus protection, because none has been installed.
3. I installed McAffee VirusScan.
4 security Center stopped giving Windows security alerts for Virus protection.
5. I uninstalled McAffee VirusScan.
6 security Center has resumed giving Windows security alerts for protection against the viruses as before.
7. I installed Windows Windows Security Essentials and rebooted.
8. I tried to uninstall and reinstall Windows Security Essentials with no joy.
Windows Security Essentials installation did not prevent Windows security alerts. No Windows Security Essentials registry entry will appear in HKEY_LOCAL_MACHINE/Software/Microsoft/Security Center and monitoring. If Microsoft consider essential security to be an antivirus product, then how to Windows Security Essentials register with Security Center?
I understand that this is an information and alert issue only. I understand that Windows Security Essentials works actually ok. I am particularly concerned by the reports. It conditions my deployment of Windows Home Server. Deactivation of surveillance or the alert is not a solution, just a poor quality work around.
In a previous thread, the author of this question even abandoned and has not requested additional assistance. An explanation was given (relevant for Windows 7), but no solution has been offered. Windows XP has not been addressed. http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/the-Security-Center-has-not-recorded-an-anti-virus/15ae2383-7ced-4850-A863-f7eb8cc90ee5
I had the same problem for a while now (I'm on xp) and have searched the Internet for a solution but found nothing at the moment.
-
Problem with wireless - Vista Network and Sharing Center does not recognize my connection!
I use the Home Visa software and my network and sharing Center does not recognize my connection but I can access the internet without any problem. Previously, I was using a wireless router Linksys with an old box of AT & T internet with no problems. The problems started after I updated my AT & T internet box that made obsolete the linksys router and now the network share does not connect. I just have the problem of getting the network and sharing device recognizing that I am actually connected to a wireless network. I can't use my printer or share files with other people. I can't get my wireless printer to work if I restart my computer and I have the documents I want printed already sent to the printer. My network and sharing Center also works very well for a few seconds when I start my computer then it turns off again.
Hello
Method 1:
Windows wireless and wired network connection problems
Method 2:
You can also view the related items for more information.
The problems of Internet connectionhttp://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems
Network connection problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
Solve problems, find wireless networks
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
Method 3:
Setting up a wireless network
http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network
Wireless network card: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions
See also:
Connect to a network with Windows Vista wireless
-
Why vista Media Center does not recognize my card tuner Hauppauge 1850
I just install WinTV-HVR-1850, Manager of device States work properly, yet Media Center does not recognize the tuner... Keep received message "no tuner found" not could someone explain what I need to do.
Hello
I suggest that you install the latest driver and software from the Web site below and check if it works:
http://www.Hauppauge.com/site/support/support_hvr1800.html
Try to contact the hardware manufacturer for assistance.
Hope this helps,
-
HP Solution Center does not recognize the network printer
Network has a hp 309 a printer, can print from the computer, the problem is:
HP Solution Center not load-says incomplete installation. If I plug in the USB cable and let it continue, it sets up a second printer that only works on the USB cable and it still does not recognize the network printer.
Question how can I get the Hp solution program to reward the network printer. If I reload the CD, then reinstall the will other people on the network of the problems?
Resettlement on your machine won't affect only you, no other machines on the network.
-
Windows Security Center does not recognize the webroot security essentials
I have webroot essentials of security installed on my windows 7. The Security Center is not recognize the program. This program has antivirus, antispyware and firewall. The webroot program works normally. Security Center sees no antivirus, windows firewall is enabled (but in fact webroots Firewall works), says and shows that the antispyware windows Defender (previously, he showed have spy sweeper from webroot and windows defender). My question is how can I get the windows Security Center recognize the webroot program? THX
Hi, thank you for responding. I could solve my problem simply by uninstalling and reinstalling the webroot program. After you reinstall and reboot, windows security center see and recognize the antivirus, firewall and antispyware components
-
Security Center does not recognize installed AntiVirus software
I tried to update my Roxio Roxio 2009 2007 but I have an error message and so I removed the installation 2009 and re-installed my 2007 edition.
When I removed Roxio 2009 I was correctly or incorrectly advised to remove all references to the "Roxio" in the registry.
I put "Roxio" in the box search of Regedit and deleted all references to Roxio then maybe that is what caused my problem.
In addition to this, I have only 1 point of restoration and it is after I re-installed Roxio 2007 after using the cleaning and the points of additional backup option.
Any ideas?
Thank you
What a fool one program is Roxio for not being able to uninstall their own stuff more graciously. I read their directions.
What is your system brand and model?
What is your Version of XP and the Service Pack?
Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
If you have used the XP cleaning and told to delete everything except your last restore Point, she did what you say, which leaves you with a RP. What do you think thre certain shortcomings here? It seems that it works perfectly.
There might still some AV programs that XP doesn't recognize not and are there is a difference between antivirus and software malware removal tools. If you are 100% sure you have something useful installed and XP does not detect it as an AV program and complain about this, you can tell XP not not to warn you of this condition.
To do this, click Start, settings, Control Panel, Security Center, and then click the link that reads:
Change the way security centers alerts me
Things together the way you want to and you will not be disturbed by these messages again. The risk is, you are disabling/undo built in the protection mechanism. I have nothing of any AV software (on purpose - I look forward to infections), so I have my disabled notification but maybe this isn't a good idea for everyone.
Some malicious programs, analysis of the programs (such as MBAM) will report this setting (unless there is an infection) and offer to fix it for you because he thinks it might be an affliction.
When you have the time, I recommend that do you this too:
Download, install, update and do a full scan with these free malware detection programs:
Malwarebytes (MMFA): http://malwarebytes.org/
SUPERAntiSpyware: (SAS): http://www.superantispyware.com/They can be uninstalled later if you wish.
The scans by operating clean, then to solve any problems.
Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!
-
Windows Action Center does not start
I got a virus in my computer a few weeks ago and I managed to clean it away. However, I just noticed that the action center to my computer does not start. Whenever I try to turn it on, it shows me a message "unable to start the Windows Security Center service. In fact when I use the services.msc program, that's not even be on the list here. Firewall does not normally or the other. It just shows the message "Update your firewall settings" and when I click on the box "Use the settings recommeded" it shows me an error message "Windows Firewall cannot change some of your settings for error code 0 x 80070424.
Of course there is a lot of information on the Internet about the problem, but none of them does not seem to work in my case.
I have Windows 7 Home premium sp1.
I even tried to repair my windows installation, but that no longer works. He refused to uppgrade to a previous version, because the drive is off course basic win7 and my current one is win7 sp1. There are also some programs that are in conflict, even if I could not even find them in my computer.
Is there any solution for this?
It helped with my Action Center problem.
http://GeekDrop.com/content/Windows-Security-Center-service-is-missing-and-wont-start-solved
And this with the firewall.
http://www.SevenForums.com/system-security/202166-unable-start-Windows-Firewall-2.html
Win 7 security 2012 was the virus.
-
I have 3 different printers HP F4400, officejets 6500 E710n-z and 709n in 3 different places. HP Solution Center only recognizes F4400. How can I get my Solution Center to recognize the other 2 without reistalling all the time. Here my current printer can print on 710n-z but the printer cannot scan, says no printer detected. How do I solve this
It's very strange. Try to create a new user account and setup the printer on this account. If this does not work, try to install the printer on another computer and see if it has the same problem. Let me know what happens.
-
Windows Media Center does not recognize an Entone Hydra box/remote control cable
I'm putting in place the WMC to work with my cable box Entone. It's not satellite, this is the area used by CCC Southslope in Eastern Iowa. There is no section Entone for activation of the box, automatic remote recognition does not take into account. When I try to teach my cable remote codes manually it will "key to continue" but never moves from the teaching of the 1 button for button 2. I am sure that the IR receiver works and is properly plugged in, and that the batteries in the remote are fresh.
Make sure the distance between the IR receiver and the remote control is quite close, there are no obstacles between the two and the whole set up is not under the direct fluorescent light.
I'm going to suggest you go through the following article: -.
How to use the functionality of Microsoft MCE Remote control learning
-
Windows Security Center does not recognize my antivirus
I installed a new driver for my Radeon 3450 graphic card. I had a problem with it and could not roll back so I tried restoring the system did not work. Since that time WSC won't recognize my Norton AntiVirus. I am running Vista 32 bit on an Acer Aspire M3201. Any suggestions? Thank you.
Do not think, but you may as well uninstall it now. Since then he probably won't do anything once it expires in any case.
You can try this when well even if it isn't Norton it can work. If you need assistance I could help you with teamviewer. You'll see what I'm doing
-
XP Media Center does not recognize the atsc tuner
Comes with a mistake to try to at least one device with ntsc tuner. I have an atsc/qam tuner.
Operating system System model Windows XP Media Center Edition Service Pack 3 (build 2600)
Install language: English (United States)
Local system: English (United States)Dell Dimension E521 Inc.
System Service tag: 1K6C6C1 (support for this PC)
Chassis serial number: 1K6C6C1
Case type: DesktopProcessor Main circuit 2.00 GHz Dual Core AMD Athlon 64 X 2
hides the central memory of 128 kilobytes
1024 kilobyte secondary memory cache
64-bit ready
Multi-core (2 total)
Not hyper-threadBoard: Dell Inc. 0CT A03 103
Serial number:... CN708216AQF10C.
The bus clock: 1000 MHz
BIOS: Dell Inc. 1.1.4 12/09/2006Readers Memory modules 349.53 GB drive hard usable capacity
292,35 gigabytes of free disk spaceHL-DT-ST DVD-ROM GDRH10N SCSI CdRom Device [scanner]
TSSTcorp DVD +-RW TS - H553A SCSI CdRom Device [scanner]WDC WD5000AAKS-00UU3A0 [hard drive] (500,11 GB) - drive 0, s/n WD-WCAYU6672846, rev 01.03B01, SMART location: healthy
3072 MB usable memory installed Slot machine 'DIMM_4' has 1024 MB (serial number E82397F1)
Slot machine 'DIMM_3' has 1024 MB (serial number E823981D)
Slot machine 'DIMM_2' has 512 MB (serial number F802488F)
Slot 'DIMM_1' has 512 MB (serial number F802485E)Hello
1. What is the brand and the model number of your TV tuner card?
2. is it compatible with Windows XP Media Center? She never worked properly on your computer?Method 1.
First of all I ask you to install the latest drivers for your manufacturer's Web site TV tuner card and check out them.Method 2.
Also, check out the methods listed in the articles below and check.
You receive an error message "No. Tuner available" when you try to watch TV Online after connecting a USB TV tuner to your computer Windows XP Media Center Edition 2005
http://support.Microsoft.com/kb/891108Update 1 for Windows XP Media Center Edition 2005
http://support.Microsoft.com/kb/873369I hope this helps.
Maybe you are looking for
-
Microsoft Frontpage 2002 SP3 is compatible with Windows 7? I intend to upgrade to Windows 7 from Windows Vista, but my most important request and the need is to maintain my web page that was created and is managed by Frontpage 2002.
-
0x80004005: unspecified during decompression error
Specified above error code appears during decompression. Help, please.
-
BlackBerry Smartphones Google Photo app for BB
I heard that Google for BB photo app is free but when I went to download it says fresh carrier may apply. So, is it going to cost me money on my Bill or not? Thank you =)
-
Is it possible to export the contacts from the people on my android phone app?
I want to be able to have access to all my contacts in my application of people on my Android phone. I have the phone RAZR M. Is it possible to export the contacts from the people app?
-
Not appearing is not in the Panel styles object
HelloFor some reason any InDesign doesn't let me create object styles. When I go to create a new object style the new object Style dialog box appears, but when I click on OK nothing appears in the Panel object styles (still empty). I think maybe it's