Actions through OpenVPN access problems

Similar Questions

• Tunnel traffic through the Access Point

  I "tunnelenabled" in the parameters of Access Points of JSON: true;

  And on the Access Point associated connection servers config guide recommends not allowing the tunneling.

  The end result is that the traffic is going through the Access Point and not crossing does not connect to the server. The client wants to keep the absolute minimum for the ports open between the objects, so I want to tunnel traffic from the Access Points through the connection to the server, and then click the virtual and physical machines internal who installed the agent to view. Even when I check the options of tunnel on the login server it always appears as if traffic is bypassing the broker for the connections and go straight to the agents.

  
  

  What the configuration change that I do have all the traffic goes through the access points and associated connection servers?

  
  

  Thanks in advance for any help or suggestion-

  
  

  J

  After a lot of trial and error reduced us to certificates that we created for Access Points. HTML5 Blast Bridge did not have other names of the object in the cert. Once we gave them a cert that had the URL and not the SAN (subject alternative names) with the real access Point server names that Blast started working again.

• CANNOT ACCESS EMAILS; Why are we unable to access our emails through windows. Problem started last night.

  Is that w could do to be able to access our emails, once again?

  Since you said "problem started last night '...

  Assuming you are using Vista.
  The method may not work, but it's worth a try:
  Do a system restore. Choose a date where you did not have this problem as your restore point.

  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Access problem control panel loading Group on the 2 tabs

  I'm using LabWindows CVI 10.0. My intention is to programmatically disable a control array in a Panel.

  Problem:

  I am loading a panel with the control array in the pages of TabControl - Tab0 and Tab1.

  Error occurs when access programmatically through below functions.

  GetCtrlArrayFromResourceID (Tab0_panel, CTRLARRAY) - able to get the resource ID.

  GetCtrlArrayFromResourceID (Tab1_panel, CTRLARRAY) not able to get the resource ID.

  His error as the ID resource not found in UIR.

  Error image which I enclose below for reference.

  Please give some suggestions.

  Ah,... that you should have mentioned earlier...: no, it's not the same.

  In addition, EasyTab is outdated and replaced, so I suggest you move your user interface to true tab panels

• Internet access problem no problems Out Of Range

  Hello

  I have some problems with the computer at the laboratory of computer science at the school.
  I had fixed the elimination of the problems of the range with starting pc mode vga but how to solve this problem, so it can boot normally without pressing f8?
  After that I had signed, I can't access the internet even if the parameters are normal and the other computers connect to the internet.
  Please fix this!

  Hello

  1 did you do changes on the computer before the show?

  2. What is the full error message that you receive on out of range problems?

  Method 1:

  See the site:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Run the fixit in normal mode and check.

  Method 2:

  Check if the problem persists in safe mode with network. If the problem does not persist in SafeMode with network check if the problem persists in the boot.

  Step 1: Safe Mode with networking

  Networking in safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  See the site:

  To start the computer in safe mode

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Step 2: Clean boot

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: To set the computer back to start normally, use the procedure How to configure Windows to use a Normal startup state in the same page.

  Note: If in case you are connected through a wireless connection and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check see topic wireless are turned on (Enabled).

• IDE hard drive into a portable speaker access problem.

  I got your desktop who died (power is not a replacement value).  I removed the two hard drives (IDE) and bought pens for use as portable hard drives.  I have not had any problems at all with the 'second' hard disk that I had originally put in place as a backup of data - music, photos, etc.  The problem I have is trying to access the old 'C' drive like a laptop.  I was hoping I could at least reformat and use it as additional storage.  I tried every possible rider but still cannot access this drive from my Vista laptop or my desktop XP.  The disc spins and it is "kind of recognized" by the host computer, but when I try to right click on it in "my computer" everything freezes.  I can still access it through the BACK.  I guess it has something to do with the fact that there is an operating system on the drive, but I was hoping that I could at least go enough to wipe.  Another strange thing is that when it is displayed in 'My computer' it appears as two disks-(that is to say E, F, or similar)

  I could solve this problem.  Using disk management, I was able to reformat the drive, leaving a small 4 GB EISA partition, which I was able to remove by using DISKPART.  In retrospect, it is more work that it was worth for a small car, but I now have a 120 GB drive laptop that I can use for storage of photos or other.

• WRT 1900 ACS - Impossible to carry web traffic through openvpn

  2.3.11 OpenVPN windows 7 X 86. Router information

  Firmware version:	1.0.0.169041
  Serial number:	18E1060B503339

  By default, OpenVPN only sends traffic over the VPN, which is intended for the VPN. Normal traffic to Web sites, for example, is not sent by the VPN. Which can be modified to send all traffic through the VPN?

  @alexdemon

  Router WRT1900ACS is a SOHO router. It doesn't have a feature of access rule where the web traffic can be managed and regulated. The tool of Parental control of your Linksys Smart Wi - Fi account is designed for local customers only.

  Note:

  OpenVPN can create the tunnel from the remote host to the main network and thus web traffic cannot be routed through the router firewall.

  Ann_18678
  Linksys technical support

• Multicast through remote access VPN (ASA)

  Hi all

  I have an ASA 5505 I want to use a device that will end for several clients for rheumatoid arthritis in so they can access our TEST network.  The problem is that the net TEST provides streams video multicast clients need to see.  I currently do with a Windows Server and Clients through L2TP.  How can I do this with the ASA instead?  I know, IPSEC does support multicast... can do something?

  Hello

  You can check the related multicast L2TP below mentioned example link...

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

  Concerning

  Knockaert

• ClearQuest through WebVPN access

  HI guys,.

  When you access the web application from ClearQuest through the Cisco WebVPN that javascript is rewritten to allow access to him through the WebVPN. The javascript rewrite no longer works, but no errors are saved with the javascript debugger. It is possible that the javascript is not 100% standards, for example a missing at the end of a single statement semi colon between a pair of braces. The code cannot be set as it produced a third. Is there a work around that will stop the rewritten javascript and what security impact it can be?

  Thank you

  Hello

  This highlights usually Java mangling problem on the SAA.

  To prevent that from happening, just chip-tunnel your bookmark to the Clearquest application as shown the following image:

  

  It will prevent the calendering ASA your application and it should work as if you were connected to your Local network.

  Kind regards

  Nicolas

• FTP access problem

  Hello

  I recently tested FTP server (Microsoft) in our local area network and had no problem connecting to the server with created users.

  Now, I am able to connect to the server and logs on, but I can't transfer data or a list of directories on the remote server.

  I guess it has something to do with our (asa5510) firewall our network natted environment. The FTP server is behind a firewall and a different public ip address. Our local network, from where I am trying to connect since is connected to the internet through a router and use NAT.

  I use FTP on ports 20 and 21 in the firewall

  In the log below, I guess that the problem is in this line:

  COMMAND >: PORT 192,168,1,48,12,231

  the local ip address of the client, where I am trying to connect to the ftp server. There's no problem.

  Is the problem caused by me being on a network of natted, and if so, how to solve this?

  hope someone can help me here

  Best regards

  Umit

  According to me, he has more to do with 'inspected ftp' rather than the NAT configuration. What kind of access and service policy lists do you use? Can you activate ftp fixup and try again?

• Through remote access vpn Ipsec within the host is not available.

  Team,

  I have a question in confiuration vpn crossed.

  ASA 3,0000 Version 5

  the only question is, to access remote vpn clinet IP cannot access inside the host. However able to reach the branch of IP and it uses corprate Internet.

  In SAA from the external interface I am able to ping remote clint IP but not from within the interface. Please help and let me know if additional information is required.

  Thank you

  Knockaert

  Hello

  For the NAT0 configuration, you only need NAT0 instruction for the interface "inside".

  This single command/ACL should allow for 'inside' <-->'vpn-pool' communication.

  NAT0 configurations on the 'external' interface should be necessary only if you make NAT0 between 2 VPN connections. I guess you could do this since you mention traffic crossed?

  I suggest using different 'object-group' to define networks of NAT0 destination for different ' object-group' to the 'outside' to 'outside' and 'inside' users NAT0.

  I also obsessively using beaches too wide network in the statements of NAT0. According to some records, they can cause problems

  For example, this network ' object-network 172.16.0.0 255.240.0.0 "contains the 172.x.x.x.x set private IP address range. And in this case it contains some of your 'inside' networks too?

  How is this a problem of crossed by the way? You say that the problem is between the VPN clients on the 'external' interface and network local hosts behind the 'internal '? Crossed would mean you have connection problem between 'outside' <->'outside' perhaps.

  I don't know if I made any sense. Can be a bit messy. But can not give very specific answers that I don't know the entire configuration.

  Also make sure you have the "inspect icmp" configured under the policy-map of the world, so that the response to ICMP echo messages are automatically allowed through the ASA.

  -Jouni

• CFC access problem

  I am new to using Flash Builder and swc (tho have used the Flash IDE for 12 years and older) and always make me a handle on the implementation of a Flex/Flash Builder project and incorporating the SWCs.  Although I have already been through several tutorials on the implementation of a project and by integrating the SWCs, I have this problem: while I can see the content of the CFC in the Package Explorer window, I am not able to access the content in the main view.  When I click on an element of the CFC, I get this error message:

  "Navigation error code.

  The source code could not be found for com.client.subfolder.ClassExample in Users/mac/projects/client/com/swc/projectframework.swc. »

  What I'm missing here?

  The CFC has been imported correctly, I can see it in the Package Explorer window and all of its contents are listed...

  Is it possible to access, view, and modify the source of the CFC?

  Thank you...

  If you do not have the original source code, you can't look at the files.

  . ABC represents Actionscript Byte Code. This is the compiled version of ready to be interpreted by the Flash Player classes. They are not incredibly human readable.

  So yes, it is normal.

• Email access problem - Satellite A200-27R

  I bought a computer laptop toshiba A200-27R.
  It has Vista home edition. I use AOL as my homepage I always use aol as my main email, although I don't use them as my internet provider. (Virgin is my internet provider) Everything was fine, but now I can't seem to access my mail more. There is no problem accessing it on my desktop pc, just the laptop. I put in my login information and the following text is displayed

  The service error of
  There was a problem processing your request. An unspecified error has occurred.

  Try again

  Your comments | Help pages | AOL.com

  The technical stuff:
  Error code: C0FE1700
  Report ID: 30077-webmail-20080929-141853

  I tried pages to help with anything not done, they want to charge me the aol software, but as I don't use them as my ISP I can't use the software. What gets me, is that I can access without any problem on the desktop. I use xp on the desktop computer. Please I appreciate any help or advice, please note that I am not very technical, so I need help in basic terms.

  Hello

  Looks like you can connect to the internet properly
  So it s not a problem with an internet connection, but with your AOL account.

  I m not very well why you can't access the email account but I m sure that it s is not a problem of laptop.
  You said that you can access the email on another computer under Win XP.
  The A200 using Vista.

  In my opinion, there could be a problem with the AOL software probably it s not fully compatible with Vista

• through the access to files applications

  Hello

  Be an Android user am new to iOS. Working on the iPad 2 air.

  I have the number of files and documents on my previous camera / laptop I need to access offline on the iPad.

  (1) I was unable to find a way to transfer files .docx, .xlsx and .pdf to the iPad via iTunes on laptop - can you help me?

  (2) I downloaded on iCloud and downloaded on the iPad as an alternative method. However, the file opens in the iCloud app. To get a pdf, I moved to iBooks. But when I opened by app Adobe PDF, the file wasn't there. So I went back to iCloud and move the file to Adobe and then it's visible here. I also found that you can move or copy a file from Adobe PDF for iBooks but not vice versa.

  (3) as an alternative method (1), I also tried emailing files for myself. Once downloaded, open files in the Mail application only. The PDF file open in the Mail application was not visible / available in Adobe PDF viewer or Polaris Office etc. You open in Mail and then 'copy' in Adobe, Polaris or app you want to use to display / change.

  I think that (Please correct me if I'm wrong), iOS is not like Android where all files are visible in all applications that can open it. For example, if I have a PDF file on my Android phone, I can open any application (Adobe PDF, Polaris, viewer of PDF of Google etc.) and this file can be found in all the apps and can open. But in iOS, each file is related to a specific application only and can be accessed in this application only. Is this correct? I had problem similar when I saw a MP4 video on iCloud, I downloaded it was visible in the Photos App, but not visible in VLC or other media player applications, I. I also downloaded a FLV file that was not playable in iCloud and I copied it on VLC where it was available but not visible in the MX player and he had no option in iCLoud to transfer / copy this FLV Player MX. I find it very restrictive, but don't know if I actually use the right of iOS - maybe that I didn't understand right?

  Finally, if I continue to make copies, he eats storage space, it's like copies of the file? So if I have a viewable/copied PDF in iBooks, Adobe, Polaris, Google's PDF Viewer is like 4 different files eat space, or there is a file with links available in each of these four applications?

  3, fix, an iPad is not a 'file system', iOS is a sandbox environment, content is stored in apps. This influences responses 1 and 2

  1, how do transfer you documents to and from your iPad depends on what the app (due to the above) that you want to copy it supports. Some applications use the section on the applications tab of the iPad when it's connected to iTunes on your computer to share files: sharing files on iPhone, iPad and iPod touch - Apple Support

  Or some might transfer it via your wifi network

  Or by electronic mail or Dropbox

  2, correct it, for some reason iBooks does not support copying of files PDF or ePub to other apps (although you might be able to open a PDF file and use the icon to 'share', the place with upward pointing arrow, to email it to yourself, then use "open in" in the mail to copy in a different application; not all PDFs will get the e-mail option). I don't think that Apple have said why.

  Not all third party applications support the copy of their files from other apps (or will appear as an option to copy to), it depends on the developer.

  If you have a document in several apps then each app will have its own copy and ranks (so a document in 3 apps will result in three copies of the document on your iPad) - it is not the same PDF that each app seeing / access.

• LAN N450 connection through a switch problem

  I replaced my router from Time Warner Ubee with a Netgear N450. I have 2 desktop computers and TV and PS3 in my basement that is connected to a Netgear GS108 switch 8 gigabit ports. Everything worked fine until I swapped the router. All my wireless devices work and the office in our head office that is connected directly to the N450 work. A desktop running Win XP Pro, the other works under Win 7. I don't get "LAN was not a valid IP configuration errors. I rebooted everything, turn off DHCP and tried to manually enter the IP information, power off the pc from the wall outlet, etc. and spent several hours on researching this issue. Any ideas would be useful.

  Problem solved. I brought the Win 7 PC upstairs and connected directly to the router. The PC immediately recognised and connected to my home network. Then, in order to eliminate potential problems with the switch itself or wiring, I brought the upstairs switch and connected between the router and the PC Win 7. Same results as above - connected to the network home and Internet. Took everything back down and voila - both PC is now successfully connected to the host and the internet using DHCP network automatically. Not sure why it worked. I went through this simple process to diagnose potential hardware issues.