Activate the audio input

Similar Questions

• Using the headphone jack to the Audio input

  Try to use my 4 GB Fuze to connect to the external audio device.  Using the standard FUZE audio output (headphone) to connect to the audio inputs, Radio BOSE or compatible stereo or home.  When connected to the input on my Bose Compatible radio, apparently not having enough power to perform this task.  "Click, click, etc."  Darn Ipod seems to be fine in this config.  Any thoughts there?  I'm sure that this is relevant for many.  Might does not seem to find a good thread about it.

  Thank you.

  Yes, the sensitivity varies depending on the computer, set of accessories speakers speakers, FM modulator, car audio, and so on.  The variable volume of the headphone level can come handy.

  The 30-pin is also variable output can be very useful, as configured in the "rocket".  The Griffin dock works fine, as long as you have 5v power supplied to the USB cable.  This output is too strong.

  Bob

• Now I get a message "you have just disconnected a device to the audio input jack," which causes the music stop and start

  Now I get a message "you have just disconnected a device to the audio input jack" quickly followed a message that 'you have just plugged a device in the audio." He then takes the messages. This translates to stop the music. I checked all the connections.

  Hello

  1. this happens when you plug in the headphones?

  2. this happens to you while streaming music online?

  3. when exactly you get this message?

  Please follow the steps mentioned below.

  Method 1:

  Follow the steps mentioned below.

  a. click the Start button.

  b. in the Start Search , type Device Manager and press ENTER.

  (c) in the Device Manager dialog box, click the Action menu, and then click find the hardware changes.

  Method 2:

  Please run the troubleshooter mentioned in the article below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  See also the below mentioned link.

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

• How can I activate the audio service

  How can I activate the audio service

  Info here

• I installed a USB device to a radio control. I have a total control, but cannot activate the audio in and out via USB

  I installed a USB device to a radio control. I have a total control but fail to activate the audio in and out via the USB port. The device does not appear on audio routing options (left click on the logo of the speaker), any ideas please?

  Tim, first read the whole message!

  (This after below is complete) Remove all usb drivers and charging system leave, after reboot, make sure that the item in question is connected before the reboot.

  Follow the steps 1, 2 and 3 below.

  1: make sure you use Win7 SP1 and all updates are current and responsible.

  2: after insurance above, go to Device Manager and remove all THE USB drivers. Don't worry, it will reload.

  3: reboot then System Device Manager will research and required load all the drivers.

  He must find all the items. If it does not investigate that in question is Win7 really compatible, 100%.

  If 100% Compat. with Windows7 should find!

  (Also make sure that the automatic Windows upgrade and install is enabled for software and hardware drivers)

• I need a button to activate the audio and trigger an object, is it possible?

  I need a button to activate the audio and trigger an object, is it possible?

  I guess it depends on exactly what you mean when you say "trigger an object. If you mean to show a hidden object, with advanced actions, it is easy. Just create an action that would first start playing the audio then reveal the object.

  If "trigger an object" means something other than to show it, please post back with what it means for you.

  See you soon... Rick

• Why can I not get no response from the audio input jack? have you tried 4 different microphones in Final Cut Pro

  I have started working on FInal Cut Pro and have discovered that my audio Jack does not recognize any microphone that I plug.  I tried 4 different microphones up to now.   The input Attenuator is turned up 50% and beyond with no effect.   The entry just says "Audio" preferences pane: "Line input" with no other available device.  Am I missing something here?   He is 4 years old and this is the first time I tried audio input.

  The line-in input on a Mac requires an entry amplified, not a single entry.

  The headphone includes a contact mic. See:

  How to use the Apple earphones with remote and mic with your Mac - Apple Support

  You can also het USB mic input devices

• Challenges of the audio input jack (seems not work)

  Hello

  I use an HP Envy 15-j030eb, running Windows 8.1 x 64.

  Recently, I need to use my laptop audio input jack to connect my speakers, but I don't get all the sounds. I tried to connect two different types of headphones, with no audio to come through. I don't remember really when I finally used, but I'm sure it worked at some point.

  Otherwise it is inserted into the Jack, I get his normal good through the internal speakers, connect a TV via HDMI also works very well.

  I tried most of the solutions I could find online (definition of default playback device, change the bass and treble levels, do a hard reset, reinstall the drivers...), but nothing helped. Start Notepad from a live USB Ubuntu USB also translates the same behavior; play music while my works of great internal speakers connection helmet muffles all. This leads me to believe that it is not a Windows/driver issue, but a bios/firmware/hardware one.

  Run HP (from usb boot) and the test of speaker adio also doesn't send audio signal to my helmet and gives a failure code: gll3kv-6nm782-mfgjxg-20ek03. I could not decypher this identifier.

  Any suggestions on how to proceed and get my audio jack working again please?

  Kind regards

  Klmdb

  Hi @klmdb

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I saw your post about the problems with your audio jack. I looked in that identification code of the failure that you have posted and there is an audio hardware failure which could be a couple of different things, but from what you describe, it's the audio jack that has failed.  The audio jack is not a replaceable part, you will need to seek to replace the motherboard or card mother.

• How to get a popup when the device is plugged into the audio input jack?

  Original title - card Audio HELP

  I have a small problem that should be pretty easy to answer. A quick response would be nice. I'm new on Windows 8, and when you plug a device into the audio jack, a box used for poster asking which device is connected. Now that the box appears when I plug in a device. How do I get it to appear again? I have Windows 8, with player realtek HD audio. More info can be provided.

  Hello

  This problem can occur because of incorrect audio settings. Let's try a few steps to solve this problem.

  Method 1:
  As you use Realtek HD Audio, I would suggest trying the following steps and check if it helps.

  Enable auto-popup
  a. press the Windows key + X, choose Control Panel, select hardware and audio.
  b. scroll and select Realtek HD Audio Manager.
  c. click the icon for folder just above and to the right where it says analog panel back and just below the device's advanced settings.
  d. click Activate dialog popup automatically when the unit is plugged in.
  e. click OK twice.

  f. now, restart the computer and check the issue.

  Method 2:
  If the problem persists, I suggest you to set the headphone or speaker that you connect as a default value, and check if it helps.

  (a) right click on the volume icon in the system tray and then click on "recording devices".

  (b) right click on the space empty in the window pop up and then select "Show disabled devices" and "Show disconnected devices".

  (c) right click on the headset and then click on 'Activate'.

  (d) (d) mettre put out the microphone, then choose "set as default device".

  (e) click apply and Ok.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• iPhone 7 lightning to the questions of the audio input jack

  I often connect my phone to listen to music on stereo systems for listening to music out loud. When I used to do with my 6s, I had no problem with the sound output. Since switching to the iPhone 7 that I need to use the adapter to play music, but when I do this the sound is very distorted and sometimes if you put the volume a bit higher up the music stops. Even with a lower volume, it is still quite distorted. When I use a headset with the adapter and plug the phone into my car is fine no problem and sounds. It is only when I play music on the radio.

  I talked to Apple support and they were not really able to diagnose the problem or give me a solution.

  I was wondering if anyone else has problems with the lightning to the audio jack connector or something similar? and everyone is aware of any other superior quality adapters, you can buy or if there is a fix by apple to do deal with this?

  I don't have the problems you describe at all.

  To the extent where a 'solution' by Apple, not sure there is any 'broken' to fix.  Anyway, we are users here on this forum, we would have no idea what Apple would do.  Speculation is prohibited by the terms of use of this forum.

  Best,

  GDG

• my headphones (or headsets) does more work when plugged into the audio input jack

  I have a 2010 27-in. iMAC.   I am running Yosemite 10.10.5.   Recently I can't get audio on the audio jack that I always used with my helmet.  Have tried the other sons of contact as well as the apple earbuds.  Audio is great internal speakers.

  When you plug your earphones sound still come through the internal speakers?

  When you plug in your headphones, you see those as an option in preferences-> sound-> release system?

• Satellite C870 - I damaged the audio input jack - where to get a new?

  It seemed to me have damaged the audio jack on my laptop, does anyone know where I can get a replacement for it and advise me if it is easier to replace, or to find someone to replace it for me

  I don't very well if you want to be able to get these parts separately m.
  To my knowledge, the headphone and microphone are part of the motherboard and are soldered to the motherboard.

  However, all compatible parts can be ordered from the maintainer authorized Toshiba in your country.

  PS: maybe an alternative would be an option for you: a kind of card like USB 2.0 to 3.5 mm Jack Audio / microphone

• No sound when the headset is plugged into the audio input jack

  When I plugged headphones into the audio jack, there is no sound.  The noise comes from the internal speakers.  I just installed System Mechanic and ran a system of analysis.  I don't know if the registry has been changed or what.  It is not a problem with the headphones; I tried another helmet and have the same problem.  The phone detects the headset, an icon in the Notifications area saying that a device has been connected.

  Inspiron 15 series 3543

  Realtek HD Audio Device

  Hello. See if it will work when you switch the driver Realtel native audio driver in Windows.

  1. open Device Manager (found in the Control Panel, or type devmgmt.msc in the search box).
  2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio".
  3 Select this option to "Update driver software".
  4. click on "Browse my computer for driver software".
  5. click on "Let Me pick from a list of drivers on my computer".
  6. put the "Show compatible hardware" check box if not already checked.
  7. in the list of devices, click on 'High Definition Audio"(native driver).
  8. click on "next".
  9. in the update driver warning box, click 'Yes' (the driver).
  10 restart the portable computer if you are prompted. If not invited, so no need to restart.

  [To return to the Realtek driver, do it again but reverse steps 2-7 names].

• Inspiron 15 do not detect the headphones into the audio input jack

  Yes, I checked to make sure it wasn't the atria. I used 2 different pairs, each of the works fine on my other computer.

  My laptop has been recently upgraded to Windows 8.1. Since then, the audio Jack was my ear has been detected. This has not happened before.

  Also, I know there are a lot of laptops with 'Inspiron 15', but I don't know exactly which one it is. If you could tell me how to find it, I'll do.

  If you want to try the native audio driver, the instructions are through this link above. If you want to see if it is better to have a driver directly from Realtek:

  Go to the selection of downloads Realtek page. http://www.Realtek.com.tw/downloads/
  On the page, click on 'High Definition Audio Codecs.
  Check "I accept", and then click "next".
  In the column named "Description" you can find the file named README. Who has the instructions for the installation or update.
  In the column named "Download", click one of the server names to download the Readme.
  Return to the column named "Description" and select your operating system (and if it is 32 bit or 64 bit) at the top of page 2 choice in the list.
  In the column named "Download", click one of the server names to download the driver.

  The current version on the Realtek site is R2.75. Don't know how that one differs from Dell.

• How to activate the audio system

  original title: SYSTEM AUDIO OFF

  By mistake, I disable the audio device / speakers.  It's not ringing now. What should I do? help please... Thank you!

  Hello

  How to disabled the audio device?

  Run the troubleshooter and check.

  Open the troubleshooting of Audio playback

  Hope this information helps.