Activate the view composer errors

Similar Questions

• Internal error of the View Composer. Contact your administrator. After the upgrade using VMware-viewconnectionserver-x86_64 - 6.0.0 - 1884746, I can't edit the AutomatedDedicatedComposerPool

  Hello.

  Some panic here.

  After the upgrade using VMware-viewconnectionserver-x86_64 - 6.0.0 - 1884746, I can't edit the AutomatedDedicatedComposerPool

  I get internal error View Composer. Contact your administrator.

  Help, please.

  Best regards

  Peter

  Hmm

  Apparently available allow was to be done by right-clicking in the pool and enable provisioning on the Provisioning... tab. Not on the status button in the overview of Ddesktop pools.

  Dang.

  Best regards

  Peter

• Connection error to the login server to view while adding the view composer

  Hello

  I added VM Vcenter server successfully to the server connection in my opinion. now, I'm trying to add server offline view composer to the login server setting. I get the error message

  Unable to connect to view the composer.

  Thanks in advance for any help

  Hi, could you please download the log files. Check the link mentioned below, it will help you.

  VMware View 5.2 Documentation Library

• There was an error trying to connect to the View Composer.

  Like most others, I try to get 4.5 view running

  I have Vcenter 4.1 and 4.5 seen installed on Windows 2008 R2 VMs 2.

  I installed view composer 2.5 on the Vcenter server on the default port 18443.

  I have disabled the firewall on both machines to make sure can communicate.

  But when I try to connect to the server to connect to the composer I get only error while trying to connect to View Composer.

  I am at a loss at this stage,

  The only thing I can find in the case of the newspapers is lower, it shows the same time I did install it.

  There is no information identifying the appropriate default server on this system. This will prevent server applications that expect to use the credentials of the system default to accept SSL connections. The directory server is an example of such a request. Applications that manage their own credentials, such as internet information server, are not affected hereby.

  I think that stuff VM manages its own credentials.

  Any ideas?

  Have you checked that the composer function is running on your vCenter Server? Nothing in Event Viewer related to the composer?

• Internal error of the View Composer. Contact your administrator.

  Hello.

  I can't create a Pool of automated office. In the last step, after I click on finish, I get a red text: internal error View Composer. Contact your administrator.

  Event:

  1 user xxxx is the creation of office with id: WinXp.

  2 error internal View Composer. Contact your administrator.

  3 VM folder/test/Personal/View/WinXP has been removed.

  This happens quickly, no more than 2 seconds.

  I can create an individual office / desktop manual pool successfully.

  Version:

  vCenter 4.1, ESX 4.1, view 4.0, XP Sp3.

  How to solve this problem? Thank you.

  Yes, the composer v. 2.0 is not supported with vCenter 4.1.

• Dashboard error: error generating the view. Error getting cursor in GenerateHea

  Hi all
  
  
  I get an error during the generation of the dashboard:
  
  
  View display error
  Error during the generation of advertising. Error getting cursor in GenerateHead
  Error details
  Error codes: OAMP2OPY:Y3QXXP6P:
  Failed to create the thread.
  Not enough disk space
  
  
  Advice on the error as soon as possible.
  You need to address urgently.
  
  
  Thank you very much...

  Hello
  He TEMP and TMP memory question... Please cleaned you OBIEE 11 g installed drive unwanted data (week ago from memory) Once cleaned try to start you dashboard report againg it will run.

  Kind regards
  Deva

• Impossible to activate the Windows Firewall - error code 0 x 80070422

  Hello

  This is the first time I see that the windows firewall is disabled and when I try to turn the action center it shows like below. then when I click on manual settings it shows as the second screen.

  I tried to install the updates from HP, but it shows again a red alert in the Security State, see below.

  Currently, using Quick heal Total security and it is valid for 3 years.

  4 HP ENVY laptop - operating system: Windows 7 Home Basic 64 - bit Service Pack 1

  Please advice how to solve this problem, thank you.

  

  

  

  Hello

  As you have difficulties to turn the firewall please find the steps below to resolve this issue.

  Perform the following steps and install automatic updates and then try to turn on the firewall.

  Run an online scan to check any virus or any other malicious software:
  http://OneCare.live.com/site/en-us/default.htm

  Run as Administrator Security Center;
  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-security-and-safe-computing

  Perform the following steps and update the computer:

  1. click on start, type Notepad in the start search box, and then click Notepad in the list programs.

  2 copy the following text, and then paste the text into Notepad:

  start wuauserv sc config = auto

  SC config bits start = auto

  SC config start = auto DcomLaunch

  net stop wuauserv

  net start wuauserv

  net stop bits

  net start bits

  net start DcomLaunch

  Click file, click Save as, and then type Repair.bat.

  3. in the file type box, click all files (*. *).

  4. in the save box, click Desktop, and then click Save.

  5. in the file menu, click on exit.

  6. right - click on the Repair.bat file that you saved in step 5, and then click Run as administrator. This action starts the required services. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  7. try again to install updates. If you install the updates, delete the file Repair.bat. To remove the file Repair.bat, right-click Repair.bat, click on remove and then click Yes.

  ·         Try to activate the firewall after these steps.

  Hope this information is helpful to you.

  Chetan 
  I work on behalf of HP

  Please click on 'Accept as Solution' on the post that solves your problem to help others to find the solution.

  Click on the STAR of CONGRATULATIONS on the left to say 'Thank you' to help!

• Sonic activate the module popping error at startup guard

  The question preceding above is correct.  Activate Sonic module drives me crazy.  Please to eliminate this problem.

  Thank you
  Alyne B may
  E-mail address is removed from the privacy *.
  Original title: sonic activate the module continues to appear. How can I get rid of him?

  This thread was created in the Windows Update forum.  The moderation of Microsoft answers team has moved to forum programs.  Thank you.

• requirement for the view composer database

  Hello

  I'm trying to install VMware-viewcomposer - 2.0.0 - 210930.exe on windows 2003 and blocked at the stage of database information.

  Is the database mysql on linux server supported?

  I installed the ODBC client for mysql and set up the system DSN and Test is always successful but when I clicck then, it shows an error.

  Specified database is not supported by Attaché is the error.

  Any idea what is - this?

  not supported.  See page 11 for DB instances taken in charge for the composer

  http://www.VMware.com/PDF/view40_upgrade_guide.PDF

• View Composer or View Manager need most of the CPU and network?

  Hello

  I intend to start experimenting with the customers see 6-8 to find the notion of vView...

  I installed View Manager to a virtual machine: (x 64) svr Win2008 connected to the same subnet that all thin clients in the view are connected.  My VCenter server where I installed View Composer works to a dedicated old (physical) (x 64) svr Win2008 connected to the view Manager / computer thinclient subnet via a 100 Mbps firewall.

  More traffic view CPU and network for thin clients would be the composer or Manager?  I wonder if the 100 Mbps "bottleneck" and the former composer server hardware will be a problem.  Or it's okay with such a low customer account...?

  Second, the View Composer installer asked a database connection.  He would be allowed to use the same (SQL Express?) as the Installer installed VCenter?  If Yes, where can I find information about how to create a composer under SQL Express database...?

  Thanks for the comments on these issues

  Best regards

  Tor

  Customers of 40-50 reviews could be possible in SQL express without a lot of questions. Go through your response, it is clear that the subnet22 is the network that will be using the network more than any other w.r.t. view desktops. (and your assumption is right).

  The network configuration in the ESX to connect virtual machines to the Subnet22, this is called VMNetwork

  User name by default and passoword for the SQLExpress will be the account used to connect and install the server vCenter in windows machine (it is windows authentication). You can connect as below.

  • Download and install SQL Management Studio from the microsoft Web site in the virtual center host operating system
  • Open SQL studio, then click on connect, the server name is "localhost\SQLEXP_VIM" and select windows authentication
  • This way you can manage SQL express and create the new database.
  • You can also view the DSN for vcenter server which automatically created during installation

  Most of the VirtualCener servers are VMs I believe, but according to my understanding, both are very popular.

  Defenitly peacekeeping vCenter in VM have a lot of benefits and felxibilities.

  Thank you

  Siva

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• Error VDM with View Composer "View Composer is not available for this EGG."

  Even after installing View dial on my VC and configure the database according to the Administrator's Guide, I get this message when I click on the button "check to see composer compatibility.  I have the 'view composer' service on the Victoria Cross started and running.  I can't find anything on the web that makes reference to this message.  Thoughts anyone?  Thank you.

  

  Shane,

  Do you use the Virtual Infrastructure 3.5 U3? This version is required by the composer of the view - see the Administrator's guide, at the bottom of page 15.

• View Composer unable to connect to vCenter

  I have a strange bug here. When I try to configure the settings of composer view View Manager I get error (403) Fodbidden. I checked the security event on the vCenter server log and there are audits of chess with the following text:

  An account could not connect.

  Object:
  Security ID: SYSTEM
  Account name: VCENTER$
  Account domain: mydomain
  Logon ID: 0x3e7

  Logon type: 8

  The account to which the connection failed:
  Security ID: NULL SID
  Account name: administrator
  Account domain:

  Failure information:
  Reason for the failure: unknown username or bad password.
  Status: 0xc000006d
  Void / status: 0xc000006a

  Any credentials, I put in the view composer settings it always tries to connect with the name of the account: VCENTER$

  My configuration: View 5.0, vCenter 5.0, see Composer 2.7

  Reason for the failure: unknown username or bad password.

  Make sure that you type it correctly?

  You can try to use the specific admin account to view and make sure that it is an Admin (not necc. only local administrator) on the machine?

• No server found view composer

  I think that the solution to the problem can be simple, but I'm not find clue in the documentation I see.

  I'll put up a view view environment 4.5. I have a vCenter server, SQL Server on the same environment as View Composer and Connection manager. There are no firewall in the environment or enabled on the operating system of these machines. The View Composer and the connection manager are on the same VM.

  Problem: When I try to add the vcenter Server, it throws the following error "no composer view server Found. Either a bad port has been entered or a network connection error occurred", as shown in figure below.

  

  My research in VMTN and Internet, has pointed out to me that the problem may be with configurations of network or administrator rights, but as mentioned before all these machines are on the same VLAN and there is no firewall. Also I use a single user from the administrator of domain for all these machines., (this is a laboratory environment, this is why we can afford to do).

  Your suggestions are very appreciated.

  Thank you.

  Kumaran

  The composer of the view must be installed on the vCenter server and not on the display connection server.

• Cannot enable View Composer

  I installed View Composer on my Virtual Center Server, but when I go in the settings of the virtual composer and try to, I get the following error:

  The composer of View Server does not respond, or the user name or password entered is incorrect. The View Composer requires that the username must be complete with the domain name (domain\administrator). Please contact the administrator.

  Also when I try to start the service View Composer, I get the following error codes in the application event log:

  Service cannot be started. VMware.Sim.CommonLib.Exception.SimDbConnectionException: [ODBC SQL Server driver] [SQL Server] Login failed for user 'SERVERNAME\ID '. -& gt; NHibernate.ADOException: failed to open the connection - & gt; System.Data.Odbc.OdbcException: ERROR [ODBC SQL Server driver] [SQL Server] Login failed for user 'SERVERNAME\ID '.

  ERROR [ODBC SQL Server driver] [SQL Server] Login failed for user 'SERVERNAME\ID '.

  at System.Data.Odbc.OdbcConnection.HandleError (OdbcHandle hrHandle, RetCode retcode)

  to System.Data.Odbc.OdbcConnectionHandle... ctor (OdbcConnection connection, s OdbcConnectionString, OdbcEnvironmentHandle environmentHandle)

  at System.Data.Odbc.OdbcConnectionFactory.CreateConnection (DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)

  at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection (DbConnection owningConnection, DbConnectionPoolGroup poolGroup)

  to System.Data.ProviderBase.DbConnecti...

  I have a database created on my SQL Server and I created a DSN pointing to the DB but I don't know if I'm using the correct connection type. I use authentication with Windows NT using the network login ID.

  Is it a kind of identity that needs rights to DB on the side of SQL Server I have to use when creating my DSN.

  Two of these errors have also and relevance to each other?

  Looks like you may send incorrect server name.

  I'll try to use sql instead of NT authentication, unless you really need to use NT authentication. do you have him allow mssql and choose the authentication type on the ODBC connection too.  If you decide to try to follow my advice, let me know if it solves the problem.

• Problems with View Composer / vCenter 4

  Hello

  I upgraded my server vCenter v4 yesterday (build 162856) and ran into problems of performance and pages of material due to a collision with the port 8443 - that was used by the View Composer.

  Then... I moved my View Composer 18443 port number, that makes all the cunning vcenter work, but now does not work my composer. I changed the port in the overview Manager it connects to and I can get as far as the button complete, when I create a new pool configured automatically. vCenter then creates the folder for him and he removes (or almost) immediately. View Manager then up a ' composer of internal error. Contact your system administrator.

  In the newspapers, a Java error is reported: ' problem setting HTTP connection:

  javax.net.ssl.SSLHandshakeException: remote host closed connection during

  handshake. "

  Any suggestions gratefully received! I'm guessing that something is always looking for an answer on port 8443, but I don't know what!

  See you soon,.

  Iain

  Probably during the 2nd half of ' 09...