NETGEAR wireless adapter connects to a network other than mine.

Similar Questions

• Settings need to connect a second desktop computer using a NetGear wireless adapter.

  Original title: wireless settings

  I need the settings to connect a second desktop computer using a NetGear wireless adapter.

  The Belkin router work a lot using my Tablet and streaming movies but I can't understand

  the settings on the second PC.

  Any help will be appreciated.

  Thank you.

  "Settings", you need are the SSID (network name) and the encryption key (password).

  Unless you have configured the router to 'hide' the SSID (generally a bad idea), you will see in the list of available wireless networks.  Then, the only thing you need is the encryption key.

  If you do not write your encryption key, you can find it by logging into your router configuration utility.

  If you have a computer running Windows can now connect to the router, open a command prompt window (start > run > cmd > OK) and type "ipconfig" (without the quotes) and press ENTER.  Take note of the 'Default gateway' address.  It is the IP address of the router.

  The default IP for Belkin routers is 192.168.2.1.

  On a computer that is already connected to the router, open a browser (Internet Explorer or Firefox) and enter the IP address of the router (the gateway by default, you noted above or 192.168.2.1).  If you do not have a computer that is connected to the wireless router, you will need to temporarily connect a computer to the router by an Ethernet cable.

  Connect to the router configuration utility.  If prompted for a password and you don't remember, you need to reset the router to its factory default.  Return ticket for additional instructions.

  Once logged in, click on "Security" under "wireless" in the menu.  At this point, you should see a page that shows your password.  Write it down and exit the router configuration utility without making any changes.

  For more help, post back with the model of your Belkin router and also mention if you have any Windows computer that can connect to the router (and if yes, what version of Windows they use).

• NetGear wireless adapter doesn't work is not in Windows 7

  I bought a netgear WG111GE adapter (also known as WG111V3) and has received assurances that it would work under Windows 7. To do this, but only randomly, most of the time I don't receive any connetcion but every now and then he seems to come to life on its own and detects my wireless network. I can't find advice on Microsoft or Netgear sites. Does anyone else have this card in Windows 7 and it works for them?

  Hello

  Welcome to the Microsoft answers site.
   
  I suggest you to uninstall the drivers from the Device Manager NetGear wireless adapter and reinstall the drivers.

  1. click on start, type Manager of devices in the search box.
  2. Goto Device Manager.
  3. click on appropriate network, right-click on the adapter netgear wireless and uninstall.

  Please goto the manufacturers website and download the latest drivers from update.
   
  Please visit the link below.
  Setting up a wireless network
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Thank you and best regards,
  Azam - Microsoft technical support.

• vSphere HA detected that this host is in a network other than the master vCenter Server is connected

  Hi all

  I try to install a vSphere 5.1 environment (vCenter 5.1 (799731))... It has never been so difficult to get a VMware product running.

  
  Problem:

  As soon as I create a Cluster HA (with 2 ESXi 5.1 (799733)) I get the message:

  "vSphere HA detected that this host is in a network other than the master vCenter Server is connected"

  I tried everything...

  vCenter place in other networks

  Multihomed vCenter

  Place the vCenter in the same network as the ESX host

  Doublechecking ip, subnets, gw, name resolution, vSwitches

  nothing done... is this a bug?

  vCenter and also the two hosts of ESXi now resides in the same L2 network.

  ESX1: 10.254.250.74 255.255.255.0

  ESX2: 10.254.250.77 255.255.255.0

  VC: 10.254.250.29 255.255.255.0

  The message may not be correct.

  Please... @ someone out there... Help! I'm at the end of my knowledge.

  Concerning

  Adrian

  You can check the configuration of VLANS on your physical switch?

  Mike

• Internet connection is unreliable - when a wireless computer connects to the network, all other stands and the router needs to be reset

  I have a home wireless network with a new router Belkin (no separate modem). There are four laptop computers in our House, which connect to the wireless network. One of them is Windows 7, both Vista and the other is XP.

  Sometimes the internet works perfectly well and all four laptop computers are able to connect simultaneously. But more often... when a new laptop is on and attempts to connect, all current laptops get kicked out of the network all together and are unable to reconnect. The network broadcasts always and appears in the list of available networks, but we are unable to connect.

  Other times, if my roommate is very well on the internet and I turn on my laptop, I can't see even the network, despite the fact that it is to use! If I turn the router off and on again (sometimes we do this several times) it works OK again.

  Sometimes this happens several times a day, other times we go days without having to reset. The problems are more frequent when the old Vista laptop is used which is what made me think it may be related to computers (or their settings) rather than the router.

  Thank you

  Alex

  You may need to check every laptop and the router, to be sure.

  Go to the website of the manufacturer of your Belkin router > make sure you have the latest Firmware for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• NETGEAR Wireless adapter WG111v3 will not work

  So I have this adapter wireless netgear WG111v3 and cannot connect to the Internet. I have windows 7. My office says that I don't have a wired adapter. Help

  Anthony,

  I you have to check out these items-

  http://Windows.Microsoft.com/en-in/Windows7/view-and-connect-to-available-wireless-networks

  http://Windows.Microsoft.com/en-in/Windows7/add-a-device-or-computer-to-a-network

  http://Windows.Microsoft.com/en-in/Windows7/cant-connect-to-a-network

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know if that helps.

• RALink 802.11n Wireless Adapter - connects at startup but the dsiconnects after a few minutes

  Hello

  I have a HP Pavillion DV6-3125SA and just reinstalled Windows 7 Home Prem after installing a new hard drive. Initially everything (including the wireless adapter) had been working perfectly, and then after the last round of updates (as you know that get you about 1 million of updates on the re - install) my wireless adapter started to misbehave. He started sporadically disconnect and reconnect, but now it gets disconnected and remains disconnected. It still works fine at startup. I checked that the driver software is updated, more I also uninstalled and let it automatically re - install. An interesting point to note, is that when I linked to go in Device Manager to disable (and re-enable), Device Manager freezes and unresponsive.

  Someone at - it had a similar problem or know a solution?

  Thanks for your help.

  Megan

  Its a cell phone, right?

  Run windows Update >... settings disable the updates recommended leaving ONLY the important updates for automatic installation.

  Visit the HP support, specific to your model, and then reinstall the chipset and wireless driver

  See if that helps

• Installed New Netgear Wireless Range extender but new network doesn't have internet access.

  I just installed a machine net universal range extender for WiFi and the signal over the Wan is very strong, but when I connect to him he says that have no internet access. What should I change? I post what I'm on the Ext network.but when I try to access other sites, it won't let me.

  I had the same problem as you and searched everywhere for a positive response and have not had a. I was about to return the netgear Extender when I, fortunately, has found a way around this strange problem.
  In fact, it's really simple, and I encourage really all those who eventually get this problem complain to netgear not having their detailed in the guide installation process that they shipped with the product.

  In my case, I have a WEP encrypted network.

  If you can't access the web interface of the Extender, you need to reset the device by inserting a paper clip in the small hole next to the WPS button (if you don't know already).

  When you are prompted for the encryption key and password for the network existing (the original one), you MUST WRITE THE PAST ON THE INPUT FIELD KEY word select and not the field the password. You can choose one of the 4 input key fields, but you MUST write the password on one of them and leave the field blank password (I think it's just for the WEP encryption, which is my case).

  I also changed the encryption type for the new network "_EXT" from WEP to WPA/TKIP but kept the same password.

  After the connection is complete the Extender successfully verified updates and all the IP addresses are assigned automatically via DHCP.

  I hope that I answered in the time before returning the Extender because I don't have a kind of complained after doing this.

  Good luck
  Marlon.

• How to enable the wireless adapter to Ad-Hoc networks.

  I am running windows 7 ultimate. And I have an adapter Wireless N I have my Htc touch pro that sends a special signal.  I'm trying my darnest to get my wireless card to see. but I can't do. How would I do this on windows 7? How can I activate my wireless card to see my adhoc network.

  Also, I use a home office computer.

  See what...

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network MS - MVP Windows Desktop Experience, "when everything has failed, read the operating instructions.

• Says wireless adapter connected, but still get IP 169...

  Recently, I moved into a new House and put everything in place and works with the exception of this computer. Adapter says it's is related to 5 bars and 54 Mbps. I perform repairs, uninstalled and reinstalled, exchanged with an adapter to work known, all closed no programs/services, disabled windows firewall, have no restrictions on the router, disabled anti virus and still no luck.

  I'd appreciate any help since my son's pc and he needs for his homework.

  Thank you

  The problem has proved to be a problem with the WEP key on that particular pc.

• Cannot connect to the user other than SYS 11g

  Hello
  
  I am expereincing a strange problem.
  
  I can not connect to Database 11g except for sys and system. Other users that I can not connect to Database 11g.
  What could be the problem?
  
  I'm running on Windows XP
  
  Version of database
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
  PL/SQL release 11.1.0.6.0 - Production
  CORE 11.1.0.6.0 Production
  AMT for 32-bit Windows: Version 11.1.0.6.0 - Production
  NLSRTL Version 11.1.0.6.0 - Production

  user400 wrote:
  I have re-solved by running the following sqlplus
  change dev user identified by test123

  Previously, I've changed the password using Toad.

  Then maybe your version of Toad does not support the 11g, and change the user through this tool uses all uppercase in user/password.

  According to your terms of use, maybe you give free alternatives [Oracle SQL Developer | http://www.oracle.com/technology/products/database/sql_developer/index.html] a try.

• How to download a recovery disc of xp to a computer other than mine.

  Hi, my friend has a computer laptop windows xp home edition, his girlfriend a recovery disc, it ran, but said, that he left his laptop with nothing on it, since the software does not load anything for his laptop is empty. Can I download a windows xp my windows 7 or vista on a drive for him? and if so how do I download it? I have download or tried to download xp, I recorded it on my E drive but it came as a zip file, then I didn't know if I should then send again for my drive e or who perhaps was just what I needed to do and his loan.  Didn't want to open it to see just in case where it downloaded to mine, so I thought I should ask, and be on the safe side. Thanks 4 your time. Very much appreciated. Kim

  Hi redgiboy,

  There is no free option to download Windows XP.  The best option is to visit the site Web of the manufacturer of the computer and order replacement disks.  If Windows XP was purchased from a reseller, do not preinstalled on the computer, see thisdocument.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP cannot connect to DSL Wireless Modem - locked mode "Acquiring Network Address", never connects. Broadcom wireless card

  I have a HP ZV5000 laptop, who has recently suffered a hard drive crash. I replaced the drive reinstalled the operating system and it is running Windows XP Home Professional with Service Pack 3 installed.

  When you attempt to connect to a wireless network, it finds all those that are generally available, but won't connect.

  The properties indicates that the laptop uses "Broadcom 802. "11b / g WLAN. (Broadcom website isn't much help. The site seems to be mostly press releases).

  I am told that it worked (I can't confirm this, as the player crashed when I got it).

  Any suggestions? If there is any other information necessary to solve this, please let me know and I'll be more than happy to provide.

  Thanks in advance!

  How do you reinstall Windows?

  If you use a Microsoft Windows XP installation CD, you must install all of the drivers as well.  If you have reinstalled using any method HP supplies to 'restore factory State' you will have already installed the drivers.

  If you can get to the Internet by connecting to the laptop using an Ethernet cable, you can go HERE and click the button "Scan Now" to make sure that you have all the correct drivers.

  However, because you can see the available wireless networks, it seems that you have at least a certain driver installed for your wireless network card.

  The usual reason that a wireless adapter cannot acquire a network address is the router's security settings are not allowing the connection.

  The best way to deal with misconfigured security settings is to remove the 'profile' currently registered and try to connect again.

  Open network connections (start > run > ncpa.cpl > OK)
  Right-click on the icon for your wireless adapter and select Properties
  Click the Wireless Networks (see screenshot)
  If the "Use Windows to configure my wireless network" box is NOT checked, you use a third-party utility to configure the adapter and need to read its User Guide to determine how to remove the 'profile' to connect to your router.
  Assuming that the box is checked, find SSID (network name) router in the list of "Preferred networks" and click 'delete '.
  OK your way out
  Find your network in the list of available networks, and then click 'connect '. Make sure you enter the password correctly.

  If this does not work, the next step would be to connect to the router by an Ethernet cable, temporarily remove all security settings that are configured on the router, remove the "My network places" configuration as above and try to connect again.

  If you need help to get to and the configuration of the router, please provide the make, model and hardware version, as appropriate (check the label).

• Inspiron n4010 virtual wireless adapter shows 'unplugged', does not connect

  I've scoured the web looking for a solution to this problem, found a similar question posted here, but no solution... en.Community.Dell.com/.../20263886

  My friend brought me his Inspiron n4010 notebook help saying until a few months ago, he used to connect to the wifi with no problems. All of a sudden, it wouldn't show all wireless networks available no matter where she went - its wireless home network, work network and neighborhood of free wifi hotspots - none would connect. Similarly, I have tried with my home wireless network and my network wireless office without result. Connect LAN2 (for Boradcom virtual Wireless Adapter) this always as 'unplugged network Cable.

  **********************************
  INFORMATION SYSTEM
  **********************************
  Reference Dell system detects shows the system as:

  Inspiron 14R (N4010, early 2010)
  Serial number: * Let me know if you need this info)
  Express service code: * Let me know if you need this info)

  Here are the specs of the system via system information:
  Host name: LAURA-PC
  Name of the operating system: Microsoft Windows 7 Home Premium
  OS version: 6.1.7601 Service Pack 1 Build 7601
  OS manufacturer: Microsoft Corporation
  OS configuration: Standalone Workstation
  OS Build type: multiprocessor Free
  Registered owner: *.
  Registered organization: Microsoft
  Product ID: *.
  Original installation date: 09/09/2010, 19:22:06
  Starting system: 02/02/2015, 12:13:39
  System manufacturer: Dell Inc..
  System model: Inspiron N4010
  Type of system: PC x 64
  Processor (s): 1 processor installed.
  [01]: Intel64 family 6 model 37 Stepping 2 GenuineInt
  El ~ 1065 Mhz
  BIOS version: Dell Inc. A02, 21/04/2010
  Windows directory: C:\Windows
  System directory: C:\Windows\system32
  Starting device: \Device\HarddiskVolume2
  Local system: en - us; English (United States)
  Input locale: en - us; English (United States)
  Time zone: (UTC-08:00) Pacific (U.S. & Canada)
  Total physical memory: 3 893 MB
  Available physical memory: 2 376 MB
  Virtual memory: Max size: MB 7 783
  Virtual memory: available: 4 938 MB
  Virtual memory: in use: 2 845 MB
  Office (s) swap file: C:\pagefile.sys
  Domain: workgroup
  Logon server: \\LAURA-PC
  Corrections: 268 fixes installed.
  [01]: KB2849697
  [02]: KB2849696
  [03]: KB2841134
  [04]: KB2670838
  [05]: KB971033
  [06]: KB2305420
  [07]: KB2393802
  [08]: KB2425227
  [09]: KB2475792
  [10]: KB2476490
  [11]: KB2479628
  [12]: KB2479943
  [13]: KB2484033
  [14]: KB2485376
  [15]: KB2487426
  [16]: KB2488113
  [17]: KB2491683
  [18]: KB2492386
  [19]: KB2497640
  [20]: KB2503658
  [21]: KB2503665
  [22]: KB2505438
  [23]: KB2506014
  [24]: KB2506212
  [25]: KB2506223
  [26]: KB2506928
  [27]: KB2507618
  [28]: KB2507938
  [29]: KB2508272
  [30]: KB2508429
  [31]: KB2509553
  [32]: KB2510531
  [33]: KB2511250
  [34]: KB2511455
  [35]: KB2515325
  [36]: KB2522422
  [37]: KB2524375
  [38]: KB2525694
  [39]: KB2529073
  [40]: KB2530548
  [41]: KB2532531
  [42]: KB2533552
  [43]: KB2533623
  [44]: KB2534366
  [45]: KB2536275
  [46]: KB2536276
  [47]: KB2541014
  [48]: KB2544893
  [49]: KB2545698
  [50]: KB2547666
  [51]: KB2552343
  [52]: KB2555917
  [53]: KB2556532
  [54]: KB2559049
  [55]: KB2560656
  [56]: KB2562937
  [57]: KB2563227
  [58]: KB2563894
  [59]: KB2564958
  [60]: KB2567053
  [61]: KB2567680
  [62]: KB2570791
  [63]: KB2570947
  [64]: KB2579686
  [65]: KB2584146
  [66]: KB2585542
  [67]: KB2586448
  [68]: KB2588516
  [69]: KB2603229
  [70]: KB2604115
  [71]: KB2607712
  [72]: KB2616676
  [73]: KB2617657
  [74]: KB2618444
  [75]: KB2618451
  [76]: KB2619339
  [77]: KB2620704
  [78]: KB2620712
  [79]: KB2621440
  [80]: KB2631813
  [81]: KB2633952
  [82]: KB2639308
  [83]: KB2639417
  [84]: KB2640148
  [85]: KB2641653
  [86]: KB2641690
  [87]: KB2644615
  [88]: KB2645640
  [89]: KB2647516
  [90]: KB2647518
  [91]: KB2647753
  [92]: KB2653956
  [93]: KB2654428
  [94]: KB2655992
  [95]: KB2656356
  [96]: KB2656411
  [97]: KB2658846
  [98]: KB2659262
  [99]: KB2660075
  [100]: KB2660465
  [101]: KB2660649
  [102]: KB2661254
  [103]: KB2665364
  [104]: KB2667402
  [105]: KB2676562
  [106]: KB2677070
  [107]: KB2679255
  [108]: KB2685811
  [109]: KB2685813
  [110]: KB2685939
  [111]: KB2688338
  [112]: KB2690533
  [113]: KB2691442
  [114]: KB2695962
  [115]: KB2698365
  [116]: KB2699779
  [117]: KB2705219
  [118]: KB2709162
  [119]: KB2709630
  [120]: KB2709715
  [121]: KB2712808
  [122]: KB2718523
  [123]: KB2718704
  [124]: KB2719857
  [125]: KB2719985
  [126]: KB2724197
  [127]: KB2726535
  [128]: KB2727528
  [129]: KB2729094
  [130]: KB2729452
  [131]: KB2731771
  [132]: KB2731847
  [133]: KB2732059
  [134]: KB2732487
  [135]: KB2732500
  [136]: KB2736233
  [137]: KB2736422
  [138]: KB2739159
  [139]: KB2741355
  [140]: KB2742599
  [141]: KB2743555
  [142]: KB2749655
  [143]: KB2750841
  [144]: KB2753842
  [145]: KB2756822
  [146]: KB2756921
  [147]: KB2757638
  [148]: KB2758857
  [149]: KB2761217
  [150]: KB2761226
  [151]: KB2762895
  [152]: KB2763523
  [153]: KB2769369
  [154]: KB2770660
  [155]: KB2773072
  [156]: KB2778344
  [157]: KB2778930
  [158]: KB2779030
  [159]: KB2779562
  [160]: KB2785220
  [161]: KB2786081
  [162]: KB2786400
  [163]: KB2789645
  [164]: KB2790113
  [165]: KB2790655
  [166]: KB2791765
  [167]: KB2798162
  [168]: KB2799494
  [169]: KB2799926
  [170]: KB2800095
  [171]: KB2803821
  [172]: KB2804579
  [173]: KB2807986
  [174]: KB2808679
  [175]: KB2808735
  [176]: KB2813170
  [177]: KB2813347
  [178]: KB2813430
  [179]: KB2813956
  [180]: KB2820197
  [181]: KB2820331
  [182]: KB2829361
  [183]: KB2830290
  [184]: KB2832414
  [185]: KB2833946
  [186]: KB2834140
  [187]: KB2834886
  [188]: KB2835361
  [189]: KB2835364
  [190]: KB2836502
  [191]: KB2836943
  [192]: KB2839894
  [193]: KB2840149
  [194]: KB2840631
  [195]: KB2843630
  [196]: KB2844286
  [197]: KB2845187
  [198]: KB2845690
  [199]: KB2846960
  [200]: KB2847077
  [201]: KB2847311
  [202]: KB2847927
  [203]: KB2849470
  [204]: KB2850851
  [205]: KB2852386
  [206]: KB2853952
  [207]: KB2859537
  [208]: KB2861191
  [209]: KB2861698
  [210]: KB2861855
  [211]: KB2862152
  [212]: KB2862330
  [213]: KB2862335
  [214]: KB2862966
  [215]: KB2862973
  [216]: KB2863058
  [217]: KB2863240
  [218]: KB2864058
  [219]: KB2864202
  [220]: KB2868038
  [221]: KB2868116
  [222]: KB2868623
  [223]: KB2868626
  [224]: KB2868725
  [225]: KB2872339
  [226]: KB2875783
  [227]: KB2876284
  [228]: KB2876315
  [229]: KB2876331
  [230]: KB2882822
  [231]: KB2883150
  [232]: KB2884256
  [233]: KB2887069
  [234]: KB2888049
  [235]: KB2891804
  [236]: KB2892074
  [237]: KB2893294
  [238]: KB2893519
  [239]: KB2893984
  [240]: KB2898785
  [241]: KB2898857
  [242]: KB2900986
  [243]: KB2901112
  [244]: KB2904266
  [245]: KB2908783
  [246]
  Network adapters: 3 interconnect installed.
  [01]: Atheros AR8152 PCI - E Fast Ethernet Controller
  Name of the connection: connection to the Local network
  DHCP enabled: Yes
  DHCP server: 192.168.1.254
  IP addresses
  [01]: 192.168.1.167
  [02]: b 87:4 d 76 fe80::b535:b8ea:8
  [03]: 2602:304:5692:7719:741's: b075:fb08:ce0
  [04]: b 87:4 d 76 2602:304:5692:7719:b535:b8ea:8
  [02]: device Bluetooth (personal area network)
  Name of the connection: Bluetooth network connection
  Status: Media disconnected
  [03]: Virtual Broadcom wireless adapter
  Connection name: Local 2 network connection
  Status: Media disconnected

  ***************************************************************
  TROUBLESHOOTING STEPS TAKEN UP TO NOW:
  ***************************************************************

  1. check that the wireless is enabled via the F2 key - it's (but turn it off seems to have no effect).

  2. check that the wireless is enabled in the BIOS - I. BIOS version is A02, I have not tried so far. I prefer to do it as a last resort, unless that specific need.

  BIOS: Wireless: enabled
  Wireless (Switch) / (Hotkey): all the
  Internal Bluetooth: enabled
  Internal WLAN: enabled
  Internal WWAN: enabled

  3. the Device Manager shows wireless network devices as missing from all the drivers? N °
  Device Manager showed the following details: virtual map of Broadcom, provider wireless: Broadcom, driver Date: 01-21-2010, driver Version: 5.60.48 - 35, digital signer: MS Windows HW Compatible Publisher

  4 are the network updated wireless drivers? With the help of Dell system detects, automatic detection of the system, he showed a driver update available listed as "Dell Wireless WLAN 1501 half Mini-Card (4313bgn) Driver. When running Setup, it gave an error "no compatible hardware found...". »

  5. I ran ipconfig/all. Here is the read:

  Microsoft Windows [Version 6.1.7601]
  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\users\administrator>ipconfig/all

  Windows IP configuration

  Host Name . . . . . . . . . . . . : **********
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Ethernet connection to the network space 2 card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Broadcom virtual wireless adapter
  Physical address.... : 02-50-F2-00-00-01
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Bluetooth network connection Ethernet card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Device Bluetooth (personal area network)
  Physical address.... : C4-46-19-EF-96-56
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Atheros AR8152 PCI - E Fast Ethernet Controller
  Physical address.... : B8-AC-6F-70-2F-4B
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 12:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 14:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {C00AD485-0CED-4EF9-B632-033E9AFD14E9}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {CD91392E-769E-4E32-A5C2-2680FF4BBC41}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #4
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {FC8C4544-C5EC-479D-AA95-B545EBDCD8C1}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #6
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  C:\users\administrator >

  6. I checked the Windows Mobility Center. Wireless 'tile' was where it should have, according to other messages I saw who were on this subject. Strangely, when I clicked on the button to launch under Dell - Radio control options, checkboxes Wi - Fi and Mobile Broadband have been unchecked and greyed out.

  7. I have reset the winsock catalog and restarted the computer via the elevated command prompt (Administrator)
  NET winsock reset catalog
  No change in status wireless.

  8. I disabled the Norton firewall and Windows and anti-virus to see if wireless was somehow blocked by them. No change in status wireless.

  9. I checked the Windows power plan settings to confirm that network cards did not have their power reduced. I put the adapter wireless for maximum while on battery and current performance alternative.

  10. I checked the Windows Event Viewer logs > Windows Logs > system:

  I've seen repeated Scriptures error spread among the many dates of "BTHUSB (Blue Tooth adapter failed in an indeterminate way, will not be used.". The driver has been unloaded. "I saw no reference to what about wireless however.

  11. I tried to run Windows Update manually to see what, if any, driver updates it can find (using a network cable connection) and got the error 'cannot be updated because the Windows Update service is not started. I confirmed that he was released. I also manually stopped and restarted the service but continued to get the same error message. I kept the Windows Firewall and Norton Firewall (and antivirus) disabled in case they were interfereing with Windows Update, but no luck.

  12. I ran bad/ad/spyware scans with a portable version of Spybot and also a free version of SuperAntiSpyware, analyze the results showed several adware results, that have been deleted.

  13. I tried to manually configure the IP address, subnet mask and entered default gateway for IPv4 to the wireless adapter, which had been put on "obtain automatically", as it should. I also put the server DNS preferred my ISP (Comcast), then tried Google 8.8.8.8. This should have worked but the connection still showed as "cable disconnected" (why is a mistake to launch a "cable disconnected" wireless connection?)

  14. just for fun, I ran the update from the Intel driver from their site (via wired), who identified the available for graphics and Chipset updates - I've updated both, but it did not help (no surprise).

  15. I started Windows in Safe Mode with network - just as in normal mode, he showed the connection wireless as "cable disconnected".

  I am open to any suggestions at this point. The laptop is out of warranty so prefer to avoid paid support, if in any way possible.

  If you can get a hardware ID by activating / deactivating it on or turned off, it suggests itself wireless card is bad... Diagnostic tests could confirm this:

  http://dellwindowsreinstallationguide.com/F12-Preboot-Diagnostics/

  You can look in the service manual to try and reinsert the card or replace it. His work a bit longer than necessary:

  http://FTP.Dell.com/manuals/all-products/esuprt_laptop/esuprt_inspiron_laptop/Inspiron-14r_service%20manual_en-us.PDF

  An easier solution if you are uncomfortable with the material of the Assembly would be to buy a USB wireless adapter.

• Extremely low signal wireless unable to connect to any network

  Hello

  I bought just a Studio 1535 and can not get the wireless to connect to any network unless I put the computer 2 feet or closer to the router.

  I am running Vista Home Premium, and according to the Device Manager my wireless is a Dell Wireless 1397 WLAN Mini card.

  When I'm right next to a router, I can connect either password protected or not.  Also, I have other computers can connect to each network without any problems.  I know that this is not a router problem.  I tried with several different routers and several different locations.

  I can see a long list of points connect wireless, each with what reads like excellent signal.  However, when I tell the computer to connect, I get a screen "Windows cannot connect to the ____."  When I select diagnose the problem, it says "Wireless association failed because windows did not receive response from the access point or wireless router.

  Dell support will not help me because I bought the computer at Best Buy and Geek Squad wants to send my computer is turned off (which I had for a day) to be diagnosed.  I would rather here check everything first...

  Thanks to all helpers, let me know what information you need from me!