Adapter of drive hard slim IUltra, T400 does not recognize it

Similar Questions

• After the update of DVD driver from Dell, my PC does not recognize the drive at all the

  Hi, I've updated my DVD burner on the Dell Web site (he said it was important), but since then, my computer does not recognize my dvd player at all. I click on "drivers" and the system finds it online. A halfway through the installation, I get an error code, and it says "Roxio pxhelp is missing" I don't have any Roxio software on my computer! Need help with getting my dvd drive working properly! Thanks in advance =)

  Original title; DVD writer not installed!

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Drive HARD Win 7 recovery does not work on Satellite L750

  Hello

  I have the Toshiba Satellite L750 with preinstaled win 7.

  I instaled the upgrade to win 8 (from dvd).

  After that I improve the MS site to Win 8.1 System.

  The system does not work properly (DVD is not recognized) so I have to install previuos system.

  First of all, I'm improving my BIOS for the new one - 3.60.

  After that I try to win 7 reinstal my HDD recovery (which is located on the d partition). But it does not work: it has been impossible to start recovering in the menu of the bios (F8 key does not work, it was only possible to press F2 or F12).

  So I have to install my dvd 8.0 Win and now I have it and it works. But this is only a clear system without any addons like nero, ms office etc.

  My question is how do reinstal win 7 of my hard drive recovery that I always on the d partition?
  in the bios the F8 key does not work.

  After clean OS installation installation of HARD drive recovery not working anymore. If you want to have the original image of recovery preinstalled on your machine, you must use recovery DVDs.
  I assume that you did not create this disc, right?

  In the user s manuals document clearly described how it works with the image recovery and the creation of recovery disks.

• Drive HARD recovery failed, Qosimo does not start with BOOTMGR is missing

  Hi all

  I recently used the Toshiba HDD Recovery thing to restore my laptop to factory settings, while he was doing this he popped by saying: she didn't, I rebooted and boots up logo Toshiba then comes to a screen with just BOOTMGR lack ctrl alt delete to restart. Anyone know how I can fix this problem so it does not once more?

  Laptop is Toshiba Qosimo X 500-149

  Thank you
  Harry

  Hello Harry

  HARD drive recovery image is screwed up and you will not be able to start over. Only way to install the Toshiba recovery image is to use the recovery DVDs. You have created a following Toshiba Recovery reminder?

  Here is the original post of callback:

  + Important INFORMATION +.

  + Your system is equipped with a hard drive recovery system. If you need repair your computer in the restaurant to original factory State, you can do so directly from the hard disk (press F8 when you start your computer, choose "Repair your computer" and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + * Toshiba recommends you create recovery disk medium using the "Toshiba Recovery Disc Creator' to ensure that you are able to restore your computer to the original, factory-installed state even if your computer is seriously damaged.* +.

• have replaced my HARD original with an SSD drive, but now my laptop does not recognize HP support assistant?

  Dear Forum,

  I replaced my original HARD with a SSD drive, but now HP support assistant recognizes my phone? The program runs but updates always fail and when I look at general specifications the serial number, product name, number of product, microprocessors, system memory, motherboard, bios system, drive hard (s), and optical drive (s) are all empty. Interestingly, it recognizes the device to display (s) as being mobile intel (R) HD graphics and current resolution of 1366 x 768 and refresh rate 60.

  My laptop is an Australian model HP DV4 3029tx, which is an intel i5 14 "(2ème génération) with AMD graphics 6750" I replaced the original 640 GB hd with a 180 GB ocz vertex 2 using acronis to clone the drive.

  I would be grateful is anyone know how to get hp support assistant to recognize my computer.

  Thank you very much

  Hello
  Try this: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems/HP-Support-Assistant-not-working-on-Win7/m-p/736511#M34734
  I think that cloning might be the question because the original configuration has been changed. Simple uninstall and reinstall again could possibly solve the problem as well...

• I just installed a 2nd ATA drive, now the computer (SR2150NX) does not recognize the CD drive.

  Computer Compaq SR2150NX Vista Home. Device Manager does not display the CD/DVD drive after installing a hard drive from second on the tablecloth that is also connected to the CD player. The new drive is seen fine. If I pull the power of the new drive and restart, the drive is visible again. The disc was a secondary drive in another computer, so it is set to be a slave. How can I get both work?

  It is perhaps as simple as changing the jumper on CS (Cable Select).

• Satellite A205-replaced drive HARD and recovery CD does not. Media test failure

  Help, please

  My wife's computer crashed, everything has begun with damaged or missing file windows\system32\en. He takes to the geek squad and diagnostic test says corrupted hard disk.
  (Trying to recover the data is another problem to solve later)

  To save money, I ordered a new HDD (WD320GB) installed the new HARD drive, inserted the recovery disc and get the following message:

  Pre-seed execution Environment (PXE) v2.1
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM
  Operating system not found

  I see the new HARD drive in the BIOS, I changed the boot order to boot with CD/DVD player but still the message above.

  What now?
  Thanks for any help I can get.

  Hello

  Can start you on another disk, mate?

  Normally, this message appears if you can boot from the HARD drive or a disk bootable t. In your case, you need to install the OS on CD/DVD first so I think the recovery disc's maybe scratchy or the reader doesn t work properly.

  Then, try another disc and see what happens. :)

• External drive HARD Toshiba 1 TB does not work on my laptop but works on another PC

  Hello
  I used my drive external HARD for almost a year with no problems until now. When I hook it up to my laptop and try to open it, the computer laptop everything freezes and I can't do anything.
  It is recognized in the Device Manager where it says "this device cannot start. Code 10 "and"the process of hosting the driver for this device has finished".

  Should I try to uninstall and reinstall even if it works without problem on another computer?
  USB ports on my laptop seem to be OK that other devices work well.

  Thanks for help.

  It looks like a USB driver problem.
  I think you should first disconnect the HARD drive.
  Then go to Device Manager, look for USB hubs and controllers and uninstall/delete all the USB controllers.
  After that, restart the system. Wait for USB devices deleted would be recognized and then connect the USB HDD to one of the USB ports.

  I hope this helps.

• using bitlocker to encrypt the hard drive but the computer now does not recognize the hard drive.

  I use a computer, provided by the company, with the OS Windows 7 Enterprise.

  Is connected a drive 2.5 inch 500G external hard, of WD.

  Using BitLocker to lock the hard drive and with a document of the company. And, later, you unlock the hard drive with the same computer. Status ok. However, I connect the HD to any other device, but no HD were found. Then I plug the HD again with my computer, the BitLock software are not really able to the HD has recognized and sometimes rapidly upward and ask for the key to recovery.

  I tried to use the key (txt file), but still no success.

  I called the hotline of Microsoft and was re-directed I post my question here.

  Appreciated if anyone in this community can help...

  My computer is LEnovo X 201.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en/w7itproperf/threads

• Windows stops my USB wireless adapter when it turns off and it does not recognize when it lights.

  I have new Dell with router Linkys, linkys Wireless USB adapter, - have had this same problem with other adapters, routers and windows XP.

  Wireless USB adapter works fine until the computer turns off during the night. When I turn on, cant' find internet b/c "no wireless adapter found" I disconnect, then reconnect the usb wireless adapter and it works very well.  I do this every time?  Is there a fix for this?

  Hello

  When you say "turned" off tell you off, or let go the day before?

  http://support.Microsoft.com/kb/928631/en-us

  Jack, MVP-Networking. EZLAN.NET

• Win7 x 64 native driver for the OfficeJet 6110 does not recognize the element of automatic duplex unit add-on unit

  After upgrading my laptop Lenovo T61 to Windows 7 x 64, I find that my OfficeJet 6110 unit automatic duplexer is not recognized.  The duplexer has worked flawlessly for 3 years under Windows XP, but apparently he is not recognized with Win7 x 64 native driver.  The auto duplexer unit is a standard HP brand option for this printer.

  The printer is connected to a USB hub, which is connected to my laptop.  The duplexer works fine when reconnected to a XP operating system with the pack of HP software/driver installed.

  Y at - it a trick to make the add-on unit unit duplex automatic, recognized and functional element in Win7?

  Thank you!

  Hello
  Enter the control panel > devices and printers.
  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  As installed in Duplex Automatic Two-Sided accessory and then click OK to save the change.

  Automatic duplex printing should now available.

  Kind regards
  Shlomi

• Computer does not recognize Toshiba external 500G HDD - HARD drive

  Sorry, I use a translator, because all the illiterate

  A year and a half used the hard drive, and now the computer does not recognize it, the TV too.
  In Device Manager, it is there, but says "initialization error".

  What should do?
  Thanks for the replies

  You have partitions software installed on the laptop you?
  I guess that the HARD disk does not appear in windows Explorer, but common partition as the partition Wizard tool might be able to recognize the HARD drive.
  You can try to format the HARD disk and to create the new NTFS partition.

  Another solution:
  Usually, you can initialize the disk by DiskManagement.

  In disk management, right-click the disk you want to initialize and then click on initialize disk.
  In the dialog box initialize the disk, select the disk to initialize.
  You can choose to use the master boot record (MBR) or the style of partition GUID partition table (GPT).

  Once a disk is initialized, you can create partitions on it.
  After you create a partition, you can format the partition to create a filesystem (NTFS).

• Why my mac does not recognize my hard drive or SD cards?

  I got a new Macbook Air last month. Since I had so much problems with it - mostly because if you plug in anything whatever in the SD card slot or USB drives, it does not recognize them. I own a mac before, as well as PC laptop dell, so I am aware of the problems when formatting the discs everywhere, but even when I plugged a new passport hard drive, the computer couldn't find. Similarly, you may not find all the SD cards when I tried to use the SD card.

  What is going with this? I am a photographer living, so I need constant access to these two. This new model has some new method for transfer of files from the external hard drive etc.?

  Close, then connect the mac to a power adapter, disconnect all external devices.

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

  reset all external then pulls even deleted

  Once you open a session reconnect the external hard drive

  If the drive is connected with a hub of party 3rd do not use it and connect the drive directly to the mac

  Connect the external hard drive and open Macintosh HD/Applications/Utilities/Disk Utility disk utility

  The drive appears in the list of external devices?

  

• iMac does not recognize the hard drive device

  iMac does not recognize my new WD My Passport for Mac external hard drive.

  I have a late 2009 21. 5-inch iMac with Mac OS X Lion 10.7.5 version and I have USB 2.0 ports.  Memory is 4 GB 1067 MHz DDR3.

  I made sure that my Finder preference displays drives and external drives.  I tried to see if would recognize a DVD and it does.

  I was hoping to save my data to be transferred to a new Mac.

  Any help will be appreciated

  Hello amfisher,

  Thank you for using communities Support from Apple!

  If I understand correctly, you are unable to see your new external drive to an iMac 2009.  I'll be happy to try to help with this.

  So that your iMac to see it, it may be necessary to reformat the drive. The best format for use with your Mac's OS X Extended (journaled).

  Format an external hard drive for use with a Mac

  1. Connect the hard drive to a USB port on your Mac.
  2. Open disk utility.
  3. On the left side of the disk utility window, select your external drive (or one of its partitions).
  4. Click the delete or delete button on the toolbar.
  5. On the Format menu, choose Mac OS extended (journaled).
  6. Type a name for your drive, and then click clear.
  7. After that the drive is deleted, close the disk utility window.

  This should allow you to copy files to the disc.

  Your computer has software called Time Machine.  It is a fantastic software for backing up your computer.  Information on how to use Time Machine is available here:

  Use Time Machine to back up or restore your Mac.

  Using Time Machine is usually the best way to move all your files from one Mac to another Mac.

  Have a great day!

• I recently had a new hard drive installed in my 2008 iMac. I'm trying to re - install office and the computer does not recognize my password. I tried all the passwords I can think of and nothing works and it wont let me continue

  I recently had a new hard drive installed in my 2008 iMac desktop computer, because right now I can't afford a new computer.   I am now under OS X El Capitan 10.11.4 and my password no longer works so that I can reinstall office microsoft for Mac.  I'm trying to change my password, but you must enter the old password and it does not recognize the password.  I tried every password I use and nothing works.  How can I change or get a new password?

  Reset the password.

  OS X 10.7 Lion, Mountain Lion, Yosemite 10.9 10.8, Yosemite 10.10 and 10.11 El Capitan

  Shut down the computer.

  Start the computer, and then press on and hold the command key and the R key to boot from the recovery partition.

  When you see the Apple logo, release the keys.

  Wait until the OS X Utilities window appears.

  Move the mouse pointer to the bar menu at the top of the screen, click on "Utilities" and select "Terminal".

  in the menu dropdown.

  Terminal window is displayed.

  TypeRegeditdans resetpassword and press enter on the keyboard.

  Reset Password Utility window will open.

  Leaving the Terminal.

  Select Macintosh HD, if not already.

  Select the user account in the menu popup box under "Select user account.

  Enter a new password.

  Re-enter the new password for the user.

  Enter a hint.

  Click on the Save"" button.

  Click  in the menu bar, and then select restart.

  Open a session.

  When Keychain dialog box appears, select "create new keychain".