adapters don't appear not

Similar Questions

• Virtual copies don't appear not

  So, go along and make some changes by creating virtual copies and now new copies I do are not displayed. He stopped this and now he's doing it again. I've accidentally made six virtual copies, can it stack them, but would not be desempilement when I right-click. With this picture, I created a virtual copy, but in the grid it appears not at all:

  

  But make other virtual copies of the other day:

  

  I have no idea why this happened. How to make all my photos, including all virtual copies is displayed in the grid? Unstacking is not an option:

  

  I'm so confused. Thank you.

  You are in a collection when you create the virtual copy?

  You have enabled filters?

• Dell XPS 8700 - secondary SATA Hard Drives don't appear not

  I tried to install two additional hard drives on my new XPS 8700. The machine came with the primary drive connected to the SATA 0 and the DVD drive connected to the SATA 1. When I installed two additional hard drives, I put in the SATA 2 & 3 ports. Hard drives appeared in Windows (8.1), nor in the BIOS. I played a bit with ports SATA 2 & 4 and 3 & 4. Hard drives are not recognized. When I looked in disk management, they weren't there. As a last resort, I unplugged the DVD player SATA cable and plugged the cable on one of the secondary hard drives (which was then attached to the SATA 1 port) to connect the DVD player to the SATA 2 this drive cable port. When I started my computer, all drives have become visible. I don't know why. SATA cables I used comes from a 5 year old computer (like hard drives). Was it a problem with the cables, or is it a problem of SATA port? The first disc hard school should go in port SATA 1?

  I searched the forum and couldn't find a similar problem (http://en.community.dell.com/support-forums/desktop/f/3514/t/19520798.aspx). Eventually, the person back to his computer.

  alexsyseng,

  for the most part, you are right. I had this same problem as well, but I already had the a06 bios. the problem is with the uefi bios feature. its ment to be safer, but causes problems when adding disks. I tried your suggestion to change the secure boot options, but it does not work for me. I found the solution by chance when I went from uefi boot inherited so that I could use my cd discpart of secure erase my ssd.

  so here's the solution, whenever you add a drive, you will pass the bios in legacy mode, then return to the uefi mode. If your computer came with windows 8 then more than likely your bios is set to uefi. When you switch the bios the legacy of your desire to computer error and you say that he has not found any what boot drives. No worries, switch to that return to uefi, reboot and now your system will start properly and all your disks will be visible in the windows and disk management. no need to replace your motherboard. Unfortunately, I spent two hours with tech support and they didn't know that either.

• Ports don't appear not not in MAX - VISA installed.

  Hi all

  Had a rather strange problem today that I couldn't solve with serial ports not appearing is not in MAX (and thus be inaccessible to LabVIEW). In the windows Device Manager, it shows 4 COM ports, and I checked with an external program that they work properly.

  I had the f2 of LabVIEW 2011 SP1 runtime installed, DAQmx 9.6.1 and 5.3 of NI-VISA (5.2 also did not work).

  I tried the things:

  -VISA update 5.2 to 5.3

  -Reinstall the COM port devices in Device Manager

  -Change the COM port numbers

  -Check that the COM ports are working properly

  -Tried to add a port USB Serial Converter as a new COM port

  -Resettlement of MAX

  -Reinstall the driver NI-VISA

  -Reinstall everything (restart every time when prompted)

  -Reset the hardware configuration of in MAX

  -Run the installers / MAX as an administrator (this forum works for the local administrator account)

  -Checked that NI-VISA appears under the Max software

  -Fixed MAX/NI-VISA

  Is there something else that could cause the COM ports not to appear in MAX when they appear (and work correctly) in Device Manager when a reinstallation of the NI-VISA / MAX solve?

  I found the solution - it turns out that the serial ports are available for LabVIEW, just do they not appear in MAX because installed just the runtime does not display devices by MAX.

  Despite making a lot of Google search earlier, he didn't throw up this knowledge base article until I have searched for it under a different expression - http://digital.ni.com/public.nsf/allkb/766FD80DAE42E52886256A0200619CFE?OpenDocument

• pinned the websites don't appear not

  When I open IE, I see 5 pin Web sites, but they no longer appear on my 8 main Windows startup screen as they did.  I tried to re - pin sites, but they don't show up.  Is there a setting I'm missing?  More my 5 pinned sites are no longer on my screen?

  Thank you

  Chad

  A full reboot seemed to fix the problem...

• themes don't appear not

  I made the error of the evolution of a theme from summer to autumn (or try to change in the fall). I went to my collections of themes to add, picked one up, the work of art has not shown, I tried one after the other, closed the browser, etc... I have read that article and which did not help. At this moment I have a brilliant white with hard to read yellow text. Windows 7, latest Firefox. I try?

  Hi PA-Lenape:

  Please you reporter if the theme it works also in Safe Mode: questions to troubleshoot Firefox in Safe Mode

  If your problem persists in Mode safe, it is not be caused by an acceleration of the extension, theme or material. Other possible causes might be plugins or changes to Firefox preferences settings, which are not disabled mode without failure. Please see next steps here

  Some can be viewed and other cant. In Firefox for office addon themes do not seem to be able to try a top way Firefox for Android.

• I tried down CC 2014 apparently I don't appear not on the product installed and tried to reinstall it apparently I was charged 3 times

  Hello

  I have install CC 2014 apparently wasn't showing on the installed icon I tried to reinstall it again, but it does not work and now I was charged three times for the same product

  Hi Richard,

  Our support people should be able to help with this. Please see the link below:

  (be sure to connect to adobe.com with your Adobe ID first)

  CC_membership-account-payment-support

  Guinot

• Files in Access don't appear not

  I have a wondering how to access my files in creative cloud. I downloaded and installed the creativity could app to my laptop. There is a green check mark of "sync files" and there are several Sin file my desktop app creative cloud on my other great desktop. " I am connected, bui I now see the files in the access area. Anyone know what I have to do to be able to access my files on my laptop; I understand is one of the main objectives of this software, creative cloud to Destop. Unless I'm wrong and I need to download a different application, which could be called "creative clould laptop?"

  Hello.

  I think you want the workflow it this.

  Desktop

  1. install Creative download cloud Adobe Creative Cloud apps | CC free trial Adobe
  2. Sign in with your Adobe ID

  Laptop

  1. install Creative download cloud Adobe Creative Cloud apps | CC free trial Adobe
  2. Sign in with your Adobe ID (same ID as above)
  • You will then be able to see all your files synced from your computer laptop and desktop on Adobe Creative cloud
  • Files synchronized from your laptop will be visible on your desktop, files synchronized from your laptop will be visible on your desktop.
  • All the files that have been synchronized from your computers will be visible to Adobe Creative Cloud.

  I hope this helps.

• I don't have a default on installation of creative cloud, but it appears not all options / navigation

  I don't have a default on installation of creative cloud but it appears not all options, and I can't access my programs. Is this a problem of blocking information? I can send a screenshot to illustrate.

  Hello

  Please refer to the threads below where this issue has been addressed:

  Creative cloud is empty window why?

  Cloud Desktop App is empty?

  New application Cloud Creative unusable: it is empty!

  Re: Empty opening creative cloud app

  Kind regards

  Sheena

• It began to appear in the first inch of each merchant site I visit with the new version, "Congratulations!" Every $5 spent at JCPenney saves you a chance to win a $500 gift card. I have run scans and nothing appears not infected, but I do not understand t

  It began to appear in the first inch of each merchant site I visit with the new version, "Congratulations!" Every $5 spent at JCPenney saves you a chance to win a $500 gift card. I have run scans and nothing appears not infected, but I don't get that annoying block in Internet Explorer. I uninstalled and reinstalled firefox and when I did, the first thing is present at his inauguration was a message that says: "you have joined the shop now...". "something or another and I had to click OK, it was a microsoft OK message. How can I get rid of this?

  URL of affected sites

  http://www.BestBuy.com, target.com, any site of retail trade

  Your problem can be caused by Malware. You can run and update according to free anti-virus software:

  1. Malwarebytes (free version) - http://www.malwarebytes.org

  2. Spybot Search & Destroy - http://www.safer-networking.org

  3. Spyware Terminator - http://www.spywareterminator.com

  In addition, there are a number of forums, you can use to help get rid you of your infection. It is:

  • Bleeping Computer
  • Safer-Networking Forums
  • Spyware Warrior forums
  • SpywareInfo Forums

• Example: officejet j4580: why my printer say my appears not connected to my computer

  Why my printer say my appears not connected to my computer

  Hello @momodeda!

  Thanks for posting on the HP Forums!

  I don't know why the computer does not show the printer offline, but I would be happy to provide help to try and get communicating them again!

  The first thing I would suggest is to power cycle all the devices.  Remove the power to the printer, shut down the computer and remove the power to the router.  Wait 20 seconds, then reconnect the router.  Wait for the lights on the router to return.

  Plug the printer in and turn on the computer.  Once all devices are back on, try printing again.

  If this does not work then I would recommend uninstalling the HP software.  Once the uninstall is complete, it would be wise to perform a cleanup of the computer disk. A disk cleanup will improve the performance of the computer and remove the temporary files that may cause problems during the installation of the software. Once disk cleanup you must restart the computer and reinstall the HP software.
  
  To uninstall the HP software, click here: uninstall the HP software
  
  To perform a disk cleanup, click here: perform a disk cleanup
  
  To download the HP software, click here: HP Officejet full feature and driver software

  If please, after back and let me know how it goes!

• Projects 2.0 Webworks appearing not

  Hello

  I am new to app development, so I don't know that it's just doing something simple, I have to break the link between the projects that I've created and Webworks.

  If I start webworks, connect my phone and transfer the app 'Helo World' original, everything works fine. If I then try to implement the code in github samples, everything begins to fall apart. When I restart webworks my project appears not so I have tried the following:

  (1) create a new project

  (2) rename all files in the files of www, js and css to *.old

  (3) copy all my files from my other project back to these files

  (4) start webworks 2.0. Nothing shows

  (5) delete all my files from another project and rename originals (remove the .old extension)

  (6) start webworks 2.0. Yet once, nothing shows

  I'm somehow break the link between my projects and webworks even if I keep the original files. What excatly is webworks looking for and where is it?

  All I wanted to do is get a blank page / screen with a few buttons and an action bar. Copied from actionBar.htm and actionBar.js in my project and published sections of script index.html to match what he tells me on github. Also changed the config.xml file, although I'll be honest, not sure that any of these files should look like.

  Background: I don't know html5, javascript or css. Learning that I will.

  Thank you

  Tim

  OK... think about it. It seems that there are some images that have been referenced and not really there. App gets to the phone now, but I'll accept this as an answer and start a new post on the new errors I get.

  Thanks for all the help

  Tim

• Custom image drop-down list appears not appropriate on Blackberry 9000 Simulator

  Hello

  I created the custom in my code drop-down list. my code works fine for other simulators.

  But when I tried to run on Blackberry 9000 Simulator from the drop-down list not shown correct image he cuts half the size of the image.

  I check my code, I did not manually height for the drop-down list.

  Please tell me why image appears not appropriate Simulator 9000.

  Welcome to the forums.

  I'm guessing that you don't know how to use the insert of Code button.  If you look at the top of the editing window, you will see a number of options for formatting such as police.  Look to the right and there are two buttons, one is used to insert the code.  Hover over the buttons and you will see a description.  Press the button insert the Code, add your code and you will see something like the following:

      public void drawListRow(ListField list, Graphics g, int index, int y, int w) {
          Bitmap bitmap = Bitmap.getBitmapResource(arrowBitmapName);
          int fontWidth = getFont().getAdvance(text);
          int width = Display.getWidth() ;
          int height = list.getRowHeight();
          g.setColor(Color.BLACK); g.setFont(fontPlain);
          g.drawBitmap(0,0, bitmap.getWidth(), bitmap.getHeight(), bitmap, 0, 0);
          g.drawText(text, 3, y-drptextHeight, 0, w);
      }
  

  I think it's the routine that you use to draw each line of your drop...

  I recommend that move you as much code as you can out of this method.  It's called very often.  Creating a Butmap here, which is an expensive operation, is not a good idea, especially when the Bitmap image in reality does not change.  So create once and use it in the drawListRow.

  Also use the parameters that are passed.  The width you have to paint is given in the parameter, and perhaps not the same as the actual display width.

  In any case, this code draws the Bitmap to (0, 0).  I susspect should be at (0, y).  This could explain why it is not drawn correctly.  You seem to have a similar problem with the text.

  The drawListRow is assigned a value of 'y' and should paint from y to y + listField.getRowHeight ().  But in fact drawListRow has access to the area of the entire painting, so can do too much else.  You must code your method correctly to get good results in your list.

  Hope this helps, if not, please post your code so we can actually read.  In fact, as I say to others, do not post your real code.  Create a simple example that we can run illustrating your problem.  Then everything can run your example and see the problem.  Never stick all your code.  People are put off by the number of lines of code.

• Quiz slides appears not second time through

  Good afternoon

  In my current project, I used quizzing self-construction slides using clickboxes (thanks lilybari!) and used some quiz slides.   In this part, I'm not related data because it is only the section of the teaching.  To some fine SCORM, I record only seen slide.  I also created my own navigation buttons for front and rear.

  When I consult the section, the first time, I see the quiz and other slides correctly. For some reason any however, if they use the back button to once again, refer to the section the quiz slides appear again and get stuck or don't appear at all.  I would like for them to see all the slides if they're coming back as is the purpose of the "back" button functionality.

  I have attached a part of my project when this happens.  Any suggestions would be greatly appreciated!

  Eric

  PS thanks Captivatr for your help earlier!

  Hello Eric,

  I attach your file with my settings. Can you check if it works as you want? The only extra that I changed it is action on success: there was a Javascript and I've replaced by continue.

  Lilybiri

• the Airport extreme appears not on the graphic overview

  the Airport extreme appears not on the graphic overview

  Everything plugged and works

  Unable to connect with the personal network

  By graphical overview, I presume you are talking about airport utility?

  Are you using wireless or ethernet?

  You have run diagnostic wireless on your Mac if you use wireless?

  Use Wireless Diagnostics helps you troubleshoot Wi - Fi on your Mac - Apple Support