Similar Questions

• Backup Exec and instant / add disk space

  I use Backup Exec to make full VM backups

  After the backup, I can see a snapshot to the virtual machine in the Snapshot Manager

  I deleted all the snapshots of the virtual machine and stop the virtual machine.

  At this point providing drive area is grayed out and e/s can not add disk space on the existing drive

  I don't see that there is a-000001, 000002 vmdk still kicking around in the virtual machine folder

  (a) is it safe to delete the 00001 and 0002?

  (b) any idea how to prevent the creation of the Snapshot Backup Exec files

  Thank you

  Steve

  It is a VM DC

  It turns out that Backup Exec was hung on the VM backup

  Once I canceled the backup, I was able to consolidate

  Thanks for your help

  Steve

• When you add a new site, Keychain prompt for all existing sites

  With 2015 CC update, when I add a new Dreamweaver site, as soon as I hit him "done" once all the ftp information is entered, I get a prompt Keychain for each existing site, I saved in Dreamweaver: "Adobe Dreamweaver CC 2015 wants to use your confidential data stored in 'Sitename-SiteServer 1' in your keychain. You want to allow access to this point? »

  I was well with crossed the first steps, assuming it wouldn't ask me once again, but he does. Every time.

  By clicking on 'Always allow' vs. 'Allow' does not seem to do much, but I don't want to test it a lot because I have to go through 80 + sites every time to see if it changes anything.

  Any experience with this? Is it a thing of access door key or a thing of Dreamweaver?

  The note of the problems at the FTP credentials won't be remembered is NOT my problem. All credentials are stored; I can switch between all sites without problem, or any guest. This happens only when I add a new site.

  Any help would be greatly appreciated!

  Dreamweaver CC 2015

  Screen Retina MacBook Pro mid 2012
  Yosemite 10.10.3

  This will help to get rid of it helps Dreamweaver | Set up a test server

• How to add preloader for an existing swf?

  How can I add a preloader for a swf already done?

  also, I have the preloader opened upward in the separate html file.

  don't want to buy all the programs to do so.

  I tried it by changing just the names of file filename preloader to load the swf file.

  but it push all the content on the right side of the screen.

  Yes to determine the dimensions of the same thing as your movie. You have the FLA of film you? you use any fscommands in there?

• Cannot add a vmdk file to existing machine

  We have received a customer vmdk file that they want us to add to one of their existing virtual machines. After downloading it in the virtual machine data store, trying to add, it doesn't show. It can only be seen if I create a new virtual machine and choose the drive as a system disk. However, then do not start. The vmdk file did not come with a configuration file. Does anyone know how to get around this problem?

  
  
  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

  Gregg Robertson, VCP3, 4, MCSE, MCSA, MCTS, MCITP

  I assume that you have only the "die" vmdk file, not the smaller descriptor vmdk which explains why you can see in the VI Client (the descriptor file is what you actually see when you search a VMDK file, not the flat file / data file) once you've imported it. If the file came from Vmware Server or Workstation, it should still have a file descriptor with it - without it you are stuck. If you don't have two files, I'm not sure you can convert using Vmware convertor - you must try this one by yourself according to the previous tips.

  You can try to recreate the VMDK descriptor for the flat file. There is a VMware KB on how to proceed:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1002511

  If you found this helpful, please consider awarding points

• Add the SSD for HP Pavilion desktop computer

  Hello

  I would like to add an SSD for my HP Pavilion 500-035ed (office). I do not want to replace the existing drive, I would add a second drive.

  I have already noticed a free sata connection and a free power cable, but I didn't notice a physical position for the support and the screws etc...

  Does anyone know if there is a manual that describes the physical position for a 2nd drive in HP Pavilion 500-035ed (office)?

  Thanks in advance,

  S.J. Westra

  Hello

  Look at the picture below and see if your model is configured for one SSD installation.

  

  I see that your particular model is native/sold to the Netherlands.  There is a forum member that frequents this forum who lives in the Netherlands. Hmmmm that's a good guy!

• How can I configure a new TimeCapsule for an existing network without having to activate the internal networks?

  I tried to go in advance and choose "Add TimeCapsule to the existing network", but it keeps defaulting to 'add a new network '.

  without having to activate the internal networks?

  "Add TimeCapsule to the existing network.

  You cannot add a TC in an existing network, if there is.

  You must configure the TC for the network.

  It keeps default back to "add a new network.

  So, it's OK... The TC is part of an existing network or makes a new.

  You must connect to the TC network... either wireless or ethernet.

  However, you can manually configure the TC simply plug ethernet for example.

  See, cable using Time Capsule for Mac for backup only.

  The same can be done for the wireless... but a TC is really the bad device for backups if you don't have a network... It's cheaper, faster and more reliable by using a USB key.

• I want to allocate more disk space for my c drive and remove the drive d

  I want to allocate more disk space for my c drive and remove the drive d. I 26 gig on the d drive and only using less than 1% of it, and I have the same amount on c, but only 39% c left. How to do this.

  LEM explained the problems that you tried to resize partitions on the same drive.

  You can create more free space in C in carrying one of the measures suggested below.

  The default allocation for the restoration of the system is 12% on your C partition is more generous. I have them would be reduced by 700 MB. Make my computer right click on your icon, and select System Restore. Place the cursor on your C drive select settings but this time find the slider and drag it to the left until it shows 700 MB and output. When you get to the settings screen, click on apply and OK and leave.

  A flaw that might be useless which is for temporary internet files, especially if you keep no copies on the disk offline. Setting the default value is 3% of the walk. Depending on your attitude to copies offline, you could bring it to 1% or 2%. In Internet Explorer, select Tools, Internet Options, general, temporary Internet files, settings to make the change. At the same time, look at the number of days, the story stands.

  The default allocation for the basket is 10% of the disk. Change to 5%, which should be enough. In Windows Explorer hover over your Recycle Bin, right click and select Properties, Global and move the slider from 10% to 5%. However, try to let you become so complete that if it is complete and you delete a file by mistake it will bypass the Recycle Bin and have gone forever.

  You can generate more space in the system (usually C) the folder move partition.

  For temporary Internet files, select Start, Control Panel, Internet Options, temporary Internet files. Settings and move back.

  To move the storage folder Outlook Express select from Outlook Express Tools, Options, maintenance, store folder and change.  http://www.tomsterdam.com/insideoe/files/store.htm.

  How to change the default location of the My Documents folder: http://support.microsoft.com/?id=310147

  You may also change the default locations of the files in Microsoft Office programs when you choose to move the My Documents folder. For Word, go to tools, Options, file locations, highlight the Documents, click on edit and change the path. For Excel, go to tools, Options, general, and change the default path.

  My Documents is one of the many the created system of special folders, which include my pictures, and my music. It can be more easily modified using TweakUi. Download TweakUI, one of MS powertoys, here: http://www.microsoft.com/windowsxp/pro/downloads/powertoys.asp.

  In TweakUi, select workstation, special folders. You can scroll down to see the full list of special folders to the left of the button to change the location.

  You can move programs, but to do this, you must uninstall and reinstall the program. With Word and Excel, the existing data files are not affected by reinstalling. Most of the work in question is going to be reinstall all updates issued after those that are included with the original Microsoft CD / DVD.

  If your drive is formatted as NTFS another potential gain arises with your operating system on your C drive. In the Windows directory of your C partition you will some uninstall files in your Windows folder in general: $NtServicePackUninstall$ and $NtUninstallKB282010$ etc. These files can be compressed or not compressed. If compressed text the name of the folder appears in blue. If these files are not compressed you can compress. Right-click on each folder and select Properties, general, advanced, and check the box before you compress contents to save disk space. On the general tab, you can see the winning amount by deducting the size on disk size. File compression is only an option on an NTFS formatted disk partition / partition.

  I'd be interested to see a report of Disk Defragmenter. Open Disk Defragmenter and click analysis. Select view report, and then click Save as and save. Now find VolumeC.txt in your My Documents folder. Open the file, place the cursor anywhere in the file, select Edition, select all to select all the text and copy and paste into the body of your message. To do this, before you run Disk Defragmenter because it is more informative.

  Select Start, all programs, accessories, System Tools, cleaning disk to emptying your trash, delete temporary Internet files and other selected options. I recommend also you click Other Options, System Restore and delete all but the last system restore point. Run Disk Defragmenter

  Using the system restore option is most appropriate when your system is slow and you need to increase the free disk space on your C partition. If you have errors that could be solved by using the system restore to your system settings back to before that the error occurred initially, do not use this option.

  Select Start, Control Panel, Folder Options, view, advanced settings and check the box in front of "show files and folders" and 'Hide protected operating system files' are unchecked. You may need to scroll down to see the second element. You should also make sure that the box before "Hide extensions of known file types" is not checked. Notwithstanding, there are some files that are hidden. Again, you will not see the System Volume Information folder.

• Media center immediately crashes when I try to add the extender for the Xbox 360

  I am running Windows 7 Home Premium.  I try to add the extender for the Xbox 360 to Windows Media Center. When I go to Media Center tasks and add an Extender, Media Center crashes immediately after I enter my Xbox console 8-digit code and click Next.  I have disabled the firewall of the router and firewall windows without success.  Restart the computer and the Xbox has not helped either.  Any suggestions that I can not yet put in place the Extender?

  Thank you.

  Hi Eric,.

  Thanks for posting your query in Microsoft Community Forum!

  According to the description of the problem, it seems that you have trouble connecting Xbox 360 extender for Windows Media Center.

  I will certainly help you with this issue.

  Here are some methods that you can try in order to solve the problem.

  Method 1: Disable the antivirus software and make sure.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Clear the Xbox 360 console system cache and check.

  http://support.Microsoft.com/kb/971755

  Method 3: Reconnect to Windows Media Center

  In the event that something happened to your connection, try to disconnect and reconnect to your Windows Media Center computer.

  To disconnect and reconnect to Windows Media Center:

  a. in the Xbox Dashboard, go to My Xbox and open Control Panel.
  b. Select computers, Windows Media Center.
  c. Select Disconnect.
  d. Select the installation program and follow the instructions on the screen to complete the Media Center Windows Installer.

  For more information, see the articles.

  www.Microsoft.com/Extender/Help

  Here is a demo for an Xbox 360 as an Extender for Windows Media Center unit setting http://Windows.Microsoft.com/en-us/Windows7/set-up-a-Windows-Media-Center-Extender
  http://www.Microsoft.com/Windows/Windows-Media-Center/learn-more/Extenders/help/Extenders-firewalls.aspx

  Tips for solving problems with Windows Media Center Extender Setup

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-Setup-problems-with-Windows-Media-Center-Extenders

  If the problem persists, or you have questions about Windows, do not hesitate to let us know. We will be happy to help you.

• How to add the new column in existing table to our desired location?

  How to add the new column in existing table to our desired location?

  For example, I have to add the new column 'course' before the salary column in the emp table.

  I think the best way is to add the column at the end of the table and create a new view with the order of the columns...

  Another option...

  places the data into a temporary table and recreate the table with the correct order of the columns, and then insert data to the table from the temporary table

  Refer

  Add column (from table) in the desired position

  Example:

  CREATE TABLE temp_my_user LIKE)

  SELECT * FROM password);

  DROP TABLE password;

  (Password) CREATE TABLE

  userID NUMBER

  , first name VARCAHR2 (25)

  , middleInitial VARCHAR2 (1)

  (, name VARCHAR2 (25));

  INSERT INTO password (userID, firstName, lastName)

  (SELECT username

  first name

  lastName

  OF temp_my_user);

  DROP TABLE temp_user;

• Add the cluster to an existing table in oracle

  Is it possible to add the cluster of an existing table? For example...

  I have a table:

  CREATE TABLE table_name)

  t_id number PRIMARY KEY,

  t_name varchar2 (50));

  Cluster:

  CLUSTER to CREATE my_cluster

  (c_id NUMBER) SIZE 100;

  Y at - it a command such as: ALTER TABLE t_name add CLUSTER my_cluster (t_id); or something like that?

  Because I want to table to look like this:

  CREATE TABLE table_name)

  t_id number PRIMARY KEY,

  t_name varchar2 (50))

  My_cluster (t_id) CLUSTER;

  And drop all the tables isn't really what I want to do.

  Thank you

  No,

  It is the reverse:

  A table can be stored as a segment of memory (the common way) or in a cluster.

  Will not be part of the table "in the cluster", but other parts outside.

  Please create a new table in the cluster and insert your data here.

  Sorry,

  Martin

• How can I add data file to an existing table on Oracle RAC ASM with no OMF? Thank you!

  How can I add data file to an existing table on Oracle RAC ASM with no OMF? Thank you!

  Hello

  So I guess you have some files in ASM, see your first existing file structure

  Select file_name

  from dba_data_files;

  and to add to an existing table, the example below (even if you're better sticking with OMFs!)-is that what you are looking for?

  SQL > create tablespace TEST1

  2 datafile '+ DATA' size 1 M;

  Created tablespace.

  SQL > select file_name in dba_data_files;

  FILE_NAME

  --------------------------------------------------------------------------------

  +Data/orcl2/datafile/users.259.859820983

  +Data/orcl2/datafile/undotbs1.258.859820983

  +Data/orcl2/datafile/SYSAUX.257.859820983

  +Data/orcl2/datafile/system.256.859820981

  +Data/orcl2/datafile/example.269.859821049

  +Data/orcl2/datafile/Test1.271.859843053

  6 selected lines.

  SQL > alter tablespace TEST1

  2 Add datafile ' + DATA / mynewfile01.dbf ' size 2 m;

  Tablespace altered.

  SQL > select file_name in dba_data_files;

  FILE_NAME

  --------------------------------------------------------------------------------

  +Data/orcl2/datafile/users.259.859820983

  +Data/orcl2/datafile/undotbs1.258.859820983

  +Data/orcl2/datafile/SYSAUX.257.859820983

  +Data/orcl2/datafile/system.256.859820981

  +Data/orcl2/datafile/example.269.859821049

  +Data/orcl2/datafile/Test1.271.859843053

  + DATA / mynewfile01.dbf

  Thank you

• How to allocate disk space for vCenter server logs

  Hello

  I plan to level 4.1 to 5.5 U2d vCenter on the customer site. One of the conditions set out in the vSphere upgrade guide is:

  "In vCenter Server 5.x, the default size for vCenter Server connects is larger than in vCenter Server 4.x. make sure that the disk space allocated for the log folder is sufficient for this increase 450MB."

  My question is how to allocate disk space for the log file and where can I find the disk space allotted to file papers to vCenter 4.1 existing?

  Just see the free space on the partition where the vCenter server logs are stored. If it is insufficient, increase the size of the virtual disk and then increase the file system to the guest OS.

• How add us partition on an existing table?

  Hi gurus,

  What would be the best way to add a partition to an existing table?

  Is there a simple documentation for example?

  Thank you

  What would be the best way to add a partition to an existing table?

  Is there a simple documentation for example?

  Was it something you were ask in an interview?

  You cannot add a partition to a table unless this table is a partitioned table.

  The table is already partitioned? If so, after the DDL.

  The Oracle documentation has examples of adding partitions to a table that is already partitioned

  Partition management

  Adding Partitions

  This section explains how to manually add partitions of a partitioned table and explains why partitions can be added specifically for partitioned more indexes.

  Adding a Partition to a partitioned Table range

  Use of the ALTER TABLE ... ADD PARTITION statement to add a new partition at the end 'high' (the point after the last existing partition). To add a partition at the beginning or in the middle of a table, use the SPLIT PARTITION clause.

• Is it possible to add a request to the existing set of request

  Hi Experts,

  Is it possible to add additional concurrent demand to an already existing application together?

  Initially, we created demand together with three concurrent programs. And the set of all projected demand one day.

  Now, we want to add another application for this application set. Is it possible add request or we need to create another set of request?

  Please give solution for this one.

  
  

  
  

  
  

  Thank you and best regards,

  Suresh.
  

  Hi Suresh

  Seems newly added application may not be connected correctly to the stages of link screen please make sure you also set the new program in the event of success, warning, error. This could be a problem.

  Concerning

  Kapardi