Addition of Win 7.

Similar Questions

• Satellite L300-1F8 - Win 7 does not start

  I bought my L300 Satellite a few days ago.
  I installed the ot Windows 7 RC version. This drug was OK until yesterday.

  When I started it, he showed the legend of Toshiba and at the moment he is supoused start loading the operating system it starts to beep.

  I tried to Flash the BIOS with the latest version released.
  After I did this everithing was normal once again, but today when I started it, the same problem apeared again.

  Can someone help me?
  Is this really a problem with the operating system, or is this a hardware problem?

  Hello

  > When I started it, he showed the legend of Toshiba and at the moment he is supoused start loading the operating system it starts to beep. I tried to Flash the BIOS with the latest version released.

  The whole story is really strange to me.
  How do update you the BIOS if you were not able to start the operating system?

  Usually the BIOS can be updated only when running Windows operating system.

  You ask if this could be a problem software or hardware; to be honest I m not quote sure why the laptop beeps but I think you should test this new with OS preinstalled Toshiba. Take the recovery disc (that you created if all goes well before install you Win 7) and installed the Vista again to check if this issue would be displayed.

  In addition, the Win 7 is still a beta version, which means that there is still a lot of bugs that could affect the functionality of the laptop.

• win xp x 86 (kb2686828)... failed!

  In addition,

  win xp x 86 (kb2604092)... failed!

  win xp x 86 (kb2656369)... failed!

  What is the solution?

  First of all check the history of windows update to find the error code for the updates failed.

  Click Start > all programs > windows update > view update history

  Make a right-click on the update failed, and then click display.

  UTC/GMT is 00:32 on Monday, July 2, 2012

• Satellite Pro L850-1NR - dualboot Win7 / Win8

  Hello world

  I use my L850 - 1NR Satellite Pro for the school. I go to a technical school for information technology, and we use windows 8. The problem is that * Windows 7 preinstalled * on my laptop and home, each PC works with Windows 7.

  When you buy a Satellite Pro L850 1NR, you get two * installation Windows 8 CD *, if I want to make one * dualboot Windows 7 and Windows 8 *. I know how to create a new volume on my hard drive, but when I run the first disc, the only option is to remove Windows 7 and install Windows 8.

  Is it possible to dualboot this and if it is possible, what should I do?  :|

  Hello

  Windows 7 is pre-installed on your laptop. 8 win was provided on DVD discs.

  In both cases; Win 7 and Win 8 is part of the image of Toshiba.
  Toshiba is a package containing all the drivers, tools and utilities.

  It s is not possible to keep the Win 7 on the HARD drive and install 8 additional to win using the recovery disk provided.
  Why? Because this isn't clean system Win 8, but as mentioned; his image.

  But in general, its possible to have a system dual boot (8 Win and Win 7). The start menu will be created that will allow you to choose between Win 7 and Win 8 OS.

  You will need to create simply new partition in Win 7 system.
  Then, you must start the MS Win 8 disk clean and could install the 8 Win on the new created partition.

• Writing on DVD + R, DVD - R and CDR on M300 - what's up?

  I'd like some comments on this post. I missed something - or Toshiba have a problem with their software on M300s distribution.

  I run a small business, and have a network of 8 PCs. I am constantly evolving of DELLs - and I have just purchase a M300 after very careful consideration. I bought a Multidrive DVD.

  I've gradually been bringing the laptop to speed by installing office software, my own files, partitioning of the main drive to separate OS/programs and my Docs. I then added the "additional software" (from CD) provided by Toshiba. Everything seemed hunky dory - so I thought I would create an image (using Acronis image) on DVD - just in case.

  Imagine my surprise when I discovered that the placement of a DVD-R in the drive, it has not been recognized - and could not be formatted. Even with DVD + R. The error message made it clear that the OEM software provided by Toshiba (Sonic DLA) does not recognize these media types (or COR). After a lot of hunting, there is a short note to this effect, buried in the text "read me". By visiting the website of Sonic, they argue that some versions of OEM of DLA will not work with the write-once format discs.
  So much for multiformat!

  I then considered using the recovery disk, I had already made (and tested) using the Toshiba Recovery console - just to get the system back to a State first. However, I couldn't read the disc. Once again on the Sonic site there is a list of the compatibility problems with DLA - and one of these programs is WinDVD - one of the two programs that Toshiba provides on his CD "additional Software"! It still gave me problems with the reading recovery disk?

  So now I'm almost snookered.

  Fortunately, using a combination of Ghost and image I managed to get back to a working laptop.

  Then, I uninstalled Sonic DLA and installed an alternative (Pinnacle InstantCD/DVD). Now I can record to CDR, DVD - RW, DVD + R, DVD - R.

  So my question is this.

  Was I forgetting something - or is the version of Sonic DLA provided (closed 4.95 - build 490B41C) inadequate? Similarly is it wise to group "additional software" (Win DVD) that is listed as having an incompatibility with DLA?

  Hello

  I'll try and help you with that. First of all, the drive is listed as Multi format to read multiple forms of media. However, and this is the crutch that not all media is the same and does the same specifications. As such, there are inconsistancies and incompatabilities, and while these are few and far between you will always get problems. Second, you cannot format a DVD-r or + R disc you can format only - rw.
  According to the version of Sonic shipped on these machines is not a full version, and not later, because since the software was loaded on the machine and then sold Sonic may have released a newer version and why are they doing this? Well because find a fault or an incompatibility with some type of media and need to get out an update to make it work. It's pretty common, and if you use Sonic, nero or others that you'll find it. If you do a recovery DVDs on a DVD with compatibility problems you might get trouble. The fact that you show where able to make it work with another application the problem is with the software and DVD disc and not material in the machine. While I see that this doesn't help much, I want to emphasize that it is not uncommon and will be almost the same for all manufacturing.

  Now, I personally recommend divert you to Sonic and use the latest version of the Nero software, this in my opinion is far superior and works with virtually all media.

  In response to your question, no you don't have not overlooked anything. Is it wise to this software? Well I think for 99% of all cd/dvd media. If however you have the 1% or so this does not work then I guess that you have right to be annoyed. The most important thing is that you have found something that works in Pinnacle, I would go with that, its probably a better software package anyway.

• Satellite A300-1N9 - where can I download Windows 7 drivers and tools?

  Welcome

  First of all I would like to thank you for any help or direct me to an idea about the drivers for this model, a moment, I will describe what exactly it.

  I bought this laptop with Vista I got a CD with the system and on this recording were already pilots and Add-ons for your laptop or other cool things like drivers Toshiba for camera, Bluetooth, Synaptics, dvd and a program or driver software I don't know exactly what it is, but such a cool thing that allows you to adjust the lighting on the whole Panel , including a laptop with the word "Satellite". Everything fits well, but only with Vista that I received from the Board of Directors of Toshiba.

  Now, I went on Windows 7 as for the fundamental factors that have webcam driver from the manufacturer Toshiba for example or a mouse. But most I count on these things I had with Vista, even if that Panel backlight laptop.

  Does anyone have an idea on what all the additives in the CD that I got, it of Vista where, somehow, you can extract these extras or is a site where you can download all or a list of these additives to win game 7

  Thanks again in advance for any help.

  Your
  WolfMark

  Hello

  First of all, you can download all the drivers and tools on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Illuminating buttons and illuminated satellite to install Toshiba Value added Package. It activates the functions on the FN keys.
  As far as I know that lighting can also be enabled/disabled in the BIOS. Check this box!

  The driver for the webcam is also listed on the Toshiba page and touchpad driver to allow virtual scrolling.

  I hope I could help a bit! :)

  Good bye

• Equium M50-192 - upgrade to Windows 7

  I have an Equium M50 - 192, model No. PSM59E-003008AV, running on XP.
  My PC is Windows 7 and I have two machines on the same OS.

  Windows 7 Advisor on the Microsoft website shows that this M50 - 192 is suitable for an upgrade.
  I have already increased the memory to 2 GB.

  However, when I checked the Web from Toshiba site for pilots, there seems to be no driver Windows 7 for M50 - 192.

  Means that I can not upgrade to Windows 7?

  Hello

  Of course, you can install the Win 7 OS even if Win 7 drivers are not available for this unit.

  From my experience the Win 7 automatically looks for drivers and in most cases, the drivers are automatically installed in my case I didn t need to install the display in addition driver Win 7 found the drivers during the installation and process installation

• Pavilion p6150t: upgrade of the screw until the resolution of the monitor.

  I just upgraded my p6150t (originally running Windows Vista Home Premium 64-bit) Windows 7 Home Premium 64 - bit using the upgrade disc provided by HP at the time of purchase. The upgrade went well, except that HP Update was no longer on the system after the upgrade. In the case the opposite (even without running upgrade HP), Win 7 works well.

  However, I have a monitor Dell S2209W capable of running at a resolution of 1920 x 1200. With Vista, I could set my display at this resolution. However, with Windows 7, I can only set the resolution to 1280 x 800. I have the original disk for the Dell monitor, but it won't install the driver on this system with Win 7 (same result during the download of the latest version of the driver from the Dell Web site).

  For Vista, the graphics driver on the HP site for this computer has been for NVIDIA GeForce 6210.  But for Windows 7, graphics drivers only listed for this computer is of course ATI unified (in addition to the Intel graphics) driver. As the original graphic card is not ATI, an updated NVIDIA driver would solve this problem?

  Any other suggestions would be welcome.

  Thank you.

  Correction: it's Nvidia GEForce G210, NO 6210.

  In addition, for Win Vista, both the unified ATI graphics card and the drivers for graphic card NVIDIA GeForce G210 are listed, but for Win 7, only the ATI driver is listed.

  Sorry for the confusion.

  Hi there @Les
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff. I understand that you are having problems of display resolution after the upgrade to Windows 7 from Vista. I'm happy to help you with this.

  In response to your question, Yes, because it is a desktop computer you can try the driver directly from NVidia and test it.  You can also try to use the HP Support Assistant and see if she can find the updated or compatible drivers for your system hardware.
  HP Support Assistant
  With the help of HP Support Assistant (Windows 7, Windows Vista)

  Or the other choice is worth trying. I'm curious to hear your results.

• Flex 10, installing Linux.

  Welcome.
  I have a lenovo flex 10 I want to install a Linux (Ubuntu family thing).
  Unfortunately, even if I have dvd recorder usb and a Linux bootable on a USB key, I can't do it.
  Secure Boot I turned off.
  Startup mode cannot change the on anything other than the UEFI.

  What should I do to the impossibility to install something in addition to win 8?

  
  

• Cannot connect to Windows 7 shares

  Objective: allow anyone to any PC windows (98se, it comes to XP and Vista machines) on my working group shared access the partitions on my main PC to Windows 7 without having to enter a user and password name.

  I had no problem to implement this when my main PC is running XP. No problems setting this up when I switched to Vista. But I just upgraded to Windows 7. When I try to connect to Windows 7 PC shares using my XP PC, I get a request for a user name and password. The biggest problem is the PC under Windows 98: he can see my main PC in network neighborhood, but when I try to connect to it to access shared partitions, it comes back with a '\\MAIN is not accessible. This application is not supported by the network. "However, the PC 98 XP PC access shares without problems and the XP PC accesses the 98 PCs activities without problems. In addition, the Win 7 PC to access both XP and 98 actions without problems.

  Windows 7 network settings: profile current (work), discovery network is on, file and printer sharing is on public folder sharing is on (anyone with network access can read and write files in public folders), streaming media is disabled, password protected sharing is turned off - it's the mindbender for me as I thought it was the key.

  Also, can someone tell me why my main Win 7 user have been shared folders by default after you run the Network Wizard in Windows 7?

  I've also posted this problem the technet forums. As I concluded there, my last solution that worked was to go back to Vista. Details of the steps at this link: http://social.technet.microsoft.com/Forums/en-CA/w7itpronetworking/thread/6e08b9e9-5463-47b6-ae6b-51e8bc642490 .

• questions to alt tab with some applications

  It's really a question of two parts:

  Application 1: version of Office Internet Explore (1 or more tablets, 1 or more windows).

  Application 2: steam (steam main window, steam client chat [optionally]).

  When alt tabbing in IE-> steam works as expected.

  However, when alt tab in the main window of steam is to the last position right before the "desktop" and not the first. Pretty frustrating.

  If you open the main window and instant messaging client this does not happen on the steam chat client - sometimes, othertimes it does.

  It appears when the steam main window is closed and then reopened, sometimes both - but if the main window is opened first, then the IM client, it won't happen on the instant messaging client.

  Seems pretty random when it happens and if you open another application the problem disappears for a while - generally I see when opening of Netflix, steam + chat client and no other applications.

  Has anyone else seen similar behavior or found a potential solution?

  In addition, in win 7 there was no way to leave native alt tab features and just delete the entry "desktop" in the alt tab / windows tab (except the key "reg" to return to the menu older alt - tab style).

  It is not that it can remove all leaving the normal alt tab win 8? That admission has always been a very great pain, esp since you can simply mouse over the lower right or use win + M to get the same results.

  I'm wondering for months why Steam was having this behavior, yet no one I talked to that had the same problem. Thank you for alerting me to the fact that it is a modern application problem. I'm usually the Mail app open in the background, so I always had this Alt + Tab behavior for a long time and thought it was quite a problem for Steam client.

• instalation of lightroom6 rejects installation on Windows 7 with note that windows vista is not supported

  I tried to install Lightroom 6 on my Windows 7 system

  The installer jejects the Installation with the remark that Windows Vista is not taken in charge by this product

  Is - this known issue? Any solution is available?

  Thanks for all your ideas,

  the solution was simple in case you know. The Installation CD includes an additional folder "Win Support files", where annother exe file is included. Using this exe file implementation of work.

  Could be better designed by Adobe.

  Concerning

  Michael

• Oracle Database 11 g: performance tuning

  I would like to know, if this certification Oracle Database 11g: performance optimization is only for those who is employed by a specialist of the Oracle partner, or anyone who has spend the exame can have this certification
  
  Best regards

  Hello

  For what is the CA Certified Specialist certification, who earn this certification? the company or the employee?

  Please see these links.

  CA launches new levels of partner Oracle, "OPN" specialized
  http://blogs.Oracle.com/certification/2009/12/0127.html

  OPN certified specialist railways
  http://education.Oracle.com/pls/web_prod-PLQ-dad/db_pages.GetPage?page_id=342

  If I work in a company that is a member in the OPN, business certification, not me?

  In my view, that deserves both. Here are the links mentioned above:

  The Oracle Certification candidates who provide their OPN company identification number when you register for and successfully select Oracle Certification exams - in addition to winning the basic certification - also handed the Oracle Partner Network Certified Specialist designation for this area also.

  And I need to be an OCP 11 g before I can earn this certification?

  Is this correct?

  OK, you should have a prior certification 'Oracle 11 g DBA OCP' before obtaining this certification.

  Kind regards
  Hussein

• How can I unlock the 427 udp port. I'm under win 7 with firewall and microsoft security essentials. No firewalls or additional security software

  How can I unlock the 427 udp port. I'm under win 7 with firewall and microsoft security essentials. No additional firewall or a security software when I go to the microsoft security essentials in the start menu, I can't find any reference to the ports.  I can't printer to work on the wireless network, even if the printer says that it is connected to the network.

  Hello

  Start the firewall of Windows listed in administrative tools.

  Create a new rule to open port 427.

  Carlos

• Qosmio F60 - no additional touchpad and function Fn after Win 8 upgrade

  I have recently installed Windows 8 on my Qosmio F60 and now I have a few questions, I think it might be related driver but not sure what drivers in particular.

  1. the touchpad still works to move the pointer but sliding along the right edge does not scroll more, I had a look on the Web page of drivers but can not find the driver I need to install to make it work. Also, anyone know if there is a driver Windows 8 so that I can drag the edge to bring up the charms and the tabs?

  2. the FN keys no longer work, so I can't control the brightness or other features along the top row of the keyboard.

  If anyone can help with or the other of these questions would be great.

  Thank you
  Phillip

  Hello

  As you can see that there is no special driver to win 8 BOF series Qosmio F60.
  This isn't win 8 supported.
  However, I think that you should be able to use the upgrade drivers to win 8 published for Qosmio F750.
  Try it.

  Recommend that you install the driver for the touchpad (from Synaptics), the utility of the feature key Toshiba value added package and system of Toshiba driver