DVD burner does not appear.

Similar Questions

• DVD burner does not recognize blank dvd inserted

  DVD burner does not recognize blank dvd inserted into the pc

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• CD/dvd burner does not

  CD/dvd burner does not, tried to download the driver but nothing is made, when I try to burner anything or cd playback, nothing happens except when I try to burn a drop of water comes on saying connect burner and try again. the cd itself is rotating in the machine but it is not read then I can't play any CD at all even the drive to reinstall the driver for the cd/dvd drive. can anyone help please

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite A100: CD/DVD drive does not appear in the Manager of peripherals and BIOS

  The CD/DVD drive does not appear in the window manager and I can't incert CD
  The BIOS displays "none" instead of "optical device".

  This means that the CD device is dead?

  Hey Micky,

  Unfortunately it's probably :-(. You can try to remove the optical drive and then reinsert it into Notepad, and then marketing and see if it is recognized as a new device.

  Check also that it is not displayed in Device Manager and if it is remove before trying the above.

  Kind regards

• My DVD drive does not appear in Windows Explorer

  This morning my computer ran a scan virus and other things, and when this was done, my computer will not respond to any type of CD.  No DVD, CD or even disks with files stored on them.
  When I open windows Explorer, the drive from DVD (e) is not even more appear.  I was wondering how to fix this.

  Hello

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• I installed plusv15 of real players and the dvd burner does not work. It freezes and told him to put in a disc.

  I bought plusv15 real player and it has been installed. for some reason any dvd burner does not work. A pop up comes up saying wrong disc record and replace it with a new drive. I did it three times. Real player support me staff referred to you. Windows dvd burner does not work.

  Hello

  I suggest you try to execute this fixit and see if it helps:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  I would also ask you to contact the manufacturer of your computer to check the updates of the firmware of your CD/DVD drive.

  It will be useful.

• Error message: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged" and dvd burner does not

  Original title: dvd burner does not work can not load the driver

  I get this message "windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged.

  Can someone help me?

  Hi Garry_x,

  1. were you able to use the DVD burner before with no problems?

  2. you remember to make changes to the computer recently?

  This can occur when more than one service is defined for a device, if there is a failure at the opening of the service registry entry, or if the driver name cannot be obtained from the service registry entry.

  You can check out the following link and check for the resolution:

  http://TechNet.Microsoft.com/en-us/library/cc772156 (WS.10) .aspx

  You can also read the following article and check if it helps:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Hope this information is useful.

• My HP DVD/ROM does not appear in the device under my computer Manager or when I scan for readers.

  My HP DVD/ROM does not appear in the device under my computer Manager or when I scan for readers, most of the time.  Every now and then it will be visible and I can use it but 90% of the time it does not exist.  I tried the regedit fix, nothing.  I tried the program Microsoft Fix It, it tells me it cannot locate a DVD/ROM.  I removed, cleaned and reinserted my DVD/ROM drive, but no difference.  I tried everything, except the upgrade to Windows 7... who will be my last resort.

  Hello gargoyle28m,

  If your hardware is not detected to upgrade to Windows 7 is not a resolution. This issue may be caused if the DVD drive is faulty or connections loose on the mother board. You may need to check the connections. I suggest you check if the DVD drive works on another computer. You can contact the manufacturer of your computer to help you with this problem.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• CD/DVD-ROM problems, drive not detected AND the category of CD/DVD-ROM does not appear in Device Manager

  I'm having serious problems here. My CD/DVD-ROM drive is not detected and will not answer. I can ONLY open the drawer at the beginning of my computer laptop startup. The drive does not appear in my computer and the category of CD/DVD-ROM does not appear in Device Manager. Therefore, the "uninstall/reinstall" is impossible if the computer behaves as it has never been this drive now or never. Previously, I was able to use it as there was no problem, but someday, it's simply not there.

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Double layer DVD burning does not

  The double-layer DVD burning does not work on my XPS420 w/vista.  The drive reads everything good and burns only 4.7 GB very well.  When you try to burn to a disc double layer blank he Burns half of the project (probably a layer), and then gives me an error message.  This happened with two different software.  Once with Roxio 10.1 included with the system and once with DVD Shrink.  I use an ISO image file appropriate.  My Player recognizes a disc blank double layer with 8 GB of free space.  During the burning process is when all else fails.  I downloaded the update of the firmware as well.  My thought is that it may be a media problem.  I virgins, disc double layer 8.5 GB DVD + R DL.  It's a brand off I've not heard of, but that was all that was available at the store.  It is a toshiba player, not sure of the model number.  16xRW +-.  Note: the front of the drive said no DL.  If all goes well they installed the correct drive.

  any thoughts?

  Thank you.

  Message edited by voiron on 2008-05-15 10:45
  
  

• DVD drive does not appear on the screen of the reader 'computer '.

  I lost access to the DVD drive. It does not appear on the screen of the reader 'computer '.
  It starts with a disc inserted, but stops after about 20 seconds without opening all files.
  The DVD comes on when it starts first and then turns off after a few seconds.
  I have re-installed the driver of Toshiba and still no access.

  I think it all started when I installed a new WD 1 TB external hard drive which its virtual CD drive on the E: drive, which was used by the installation DVD player. I moved the external hard drive G: and drive E: letter has left vacant, but still does not work.

  Any ideas how I can fix this problem? It would be greatly appreciated.

  Optical disc drive is listed correctly in the Device Manager?

• HP pavilion dv6 notebook (my dvd burner does not work

  I have a hp pavilion dv6 laptop. my burner does not work. I went to the Device Manager I uninstalled, shut down the computer, restart the computer, the device mgr.enable the writer went I have little yellow guest. still, the writer does not.

  I perform a driver update, the response was: the driver is already installed is to this day. My dv6 is 28 months old.

  need some advice.

  under Device Manager.  CD-ROM/DVD-rom readers

  HP cddvdwsn-208bb

  "device usb HP dvd writer 940D thank you billy'g"

  Hello

  Try please run now from the following link:
  
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Kind regards.

• DVD player does not appear error - the driver may be corrupted or missing. Code 39, fix the driver installation fails, virtual drives don't work - same results if the material under tension

  Original title: drive does not appear, difficulty he pilot installation fails, virtual drives don't work - same results if the material under tension

  A few weeks ago, as my two DVD players (the two Samsung Lightscribe SH-S223Q of) disappeared after a repair installed, I did for the other problems (not sure if it was directly after installation because I don't notice it right away, but it was no doubt). In Device Manager, it gives the message:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  I tried the Microsoft Fix It tool (Mats_Run.dvd.exe) that detects the problem and says "Install device driver" in a popup, but then he says "software device driver failed to installed. At the end it says under the issue, the "CD/DVD drive is not detected" and the status of Fix 'not set '. Note that, when I boot from another hard drive (with Vista 64 on it installed from the same DVD, just a new installation) disks appear very well. Also I can boot from the drive as well.

  I can't do a repair installation, since it must initiate Windows, and I can't load the disc. I tried to update my BIOS but that has no effect.

  Recently I actually moved this hard drive to another one, with another brand of hard drive and all the rest. Just like before, if I boot from another hard drive (this one with Windows 7), the drive unit-a Optiarc AD-7230 s - looks and works, and I can also boot from the drive at startup. But since the drive hard as I want to use, the drive does not appear. Fix it, etc. Device Manager gives the same messages as before.

  I tried virtual drives - Daemon Tools Lite and Virtual Clonedrive. When I try to add virtual devices to help, nothing happens. The new drive will be displayed in the Manager of devices, but with the same error Code 39 as the real drive.

  What are my options at this point? How can I get the drive to appear or to fix my copy of Windows?

  I could solve this problem. I started in Ubuntu and deleted the existing cdrom.sys, cdrom.inf etc. files (as in Windows, they were protected and I couldn't delete them), then I copied the files from another installation of Vista I had on another hard drive. After having done that, I updated the drivers in device, disabled/enabled readers and readers management that presented themselves.

• Satellite A350-CD/DVD drive does not appear

  My CD drive does not appear in my computer and no longer works

  Help, please!

  Thank you

  Hi denis,.

  It appears perhaps with yellow exclamation point in Device Manager? With the code 19 error? I ask this question because I founded this interesting article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/314060

  In addition, it would be interesting to know if the drive is seen in BIOS or not because in the worst case, need to replace the disk.

• CD/DVD drive does not appear in Windows 8

  My CD/DVD drive no longer appears in Windows Explorer in point 8.1 of Windows on my desktop HP Pavilion Slimline 400-034. The disc rotates during startup. I tried the troubleshooting of Microsoft Window 8 with no luck. I would try the HP troubleshooting which requires access BIOS when booting, but by pressing F10 at startup me does not BIOS but Windows load normally. Any suggestions to at least help me get the BIOS?

  Solved! No. thanks to HP. Even if I had never opened the file on my PC and make sure that the cable DVD could not be disconnected, I decided to look for. Much to my surprise, he has been disconnected - but not by me - by a HP technician. I remembered that I had to return the PC to HP to replace the power supply warranty in June 2014. Not only have they not reconnect the cable SATA DVD, they put the cable from the hard drive in the MB connector where the DVD cable was supposed to be. After trial and error and insert the DVD cable in the 3 open SATA connectors with no luck, and finally move the cable from the hard drive to another connector and put the cable DVD where the cable from the hard drive was, the DVD has been recognized by Windows and working correctly. Thanks to HP for the many hours I lost to try to correct their mistake.