ADE will not identify iPod Touch

Similar Questions

• ADE will not identify Kobo Touch

  Try to copy books from library PUB file on Kobo Touch but ADE does not show my ereader on the left side of the screen. Tried running ADE with connected/not connected ereader, etc. several times, but it does nothing. Tried to uninstall/reinstall the ADE and Kobo desktop as well as did a restart of the plant of Kobo.  The book shows and can read in ADE.  Tried several times to follow the other son instructions to read the help file in ADE (press F1) and follow the instuctions here to disable and re-enable ereader by pressing the keys (Ctrl-Shift-e or something) but I was never able to find something in this help document instructions for display for an ereader that is not displayed.  Using Windows XP.  Any ideads to recognize the drive?

  It turns out that mine was a defective unit.  I returned it to the chapters and they gave me a replacement.  I was up and running less than an hour and fortunately have many books from the library installed on my new Kobo with ADE.   Originally, as well as of the ADE do not recognize the Kobo, my computer did not recognize it properly either.  He showed like a flash drive and I got the error message (on three different computers at this time) that she needed to put in shape.  I hope this helps.

• Windows 8 will not detect iPod Touch 2 generation

  Hello!

  My problem is I have an iPod Touch 2 gen and when I plug in windows cannot detect it. If I go to post work is not in the list, or if I go to Device Manager, it is still not detected not even in portable devices or controllers Bus USB, but the iPod is charging. It happened after a restored building and now I need to connect it to iTunes, but it does not work. I tried with Windows 7, 8 and 10, and I don't know what to do at the moment. My 5s iPhone works fine with the same computers.

  Please help me, thank you

  Greta

  Hi Tom,

  Thanks for posting your query in Microsoft Community.

  I understand that the iPod Touch 2 connects not with Windows 7, 8 or 10 and I will be happy to answer your query. Let me ask you;

  • IPod Touch 2 appears in iTunes?
  • You receive an error message?

  This could be due to problem of incompatibility with iTunes. Given that iPhone 5s connects without any problems, you can refer to the suggestions provided by Apple in the link below.

  iPod touch not appearing is not in iTunes

  If the problem persists, I would ask that you check with Apple support.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• New Windows Mobile 8 will not recognize Ipod touch

  I go to a PC from a Mac.  My new laptop (bought Jan 11) runs under windows 8.  The computer does not recognize my ipod touch (4th generation).

  When I plug it I get: "USB device not recognized. The last USB device that you connected to this computer has malfunctioned and Windows does not recognize it. »

  I tried on windows phone 7 my husband and got the same error.

  My ipod has never been used on a PC.

  I downloaded & installed iTunes successfully on 12 Jan.

  Problem solved with a new cable!  Plugged in and works perfectly.  Phew!

• Satellite A135-S2356 - BIOS will not identify SATA hard

  Hello everyone, hope you can help out me.

  Got a Satellite A135-2356 opportunity, everything seems fine but BIOS will not identify SATA HDD, shows no disk BIOS downgraded to 1.30, not good, upgraded to 1.40, not good. BIOS has no change/test/detection of HDD/SATA settings options. Tested the drive in another laptop and it reads very well. Received the Toshiba (Vista Basic 32) recovery CD, but given that the BIOS will not read the disk, can't do anything. Cleaned contacts, not good. This HARD disk must be too large, or something for the Board of Directors.

  * Hitachi HTS541612J9SA00 120 GB SATA, 5400 RPM *.

  Thanks for the help!

  Hello Richie

  To be honest, I do not think the disc is too big for your laptop. I can imagine that your laptop can handle with drives of 160 GB too. Unfortunately there is no public document on the possibilities of HARD drive upgrade. I can imagine that ASP in your country has information about such things.

  It's also quite strange that HDD is not recognized correctly. Long ago, I had the same problem. Every time when I used F12 at startup disk HARD were not as boot device. Solution in my case was to upgrade the BIOS to the default settings. I believe that your BIOS has already the default settings, but try to do it again.

• HP Photosmart Prem 310a went offline suddenly and will not identify the SSID to run the Network Setup Wizard.

  All of a sudden the printer has gone offline a few days ago.  Went through all the diagnostics, etc. but nothing fixed.  A solution-Assistant will not work cause it will not identify the SSID of the network that he has done since it was installed (long ago).  Have tried everything I can find online, unless I don't understand or is not quite apply and still nothing.  Wireless network works with everything except the printer. I am not very computer so I do not understand most of the letter & numbers abbreviations used here.  Help.

  It may be a heat problem - radio from the printer gets flakey when it's hot.

  Finding 5 wireless networks should - Yes you have one, but your neighbors also have.

• Voice-over work is not on iPod Touch

  Hello

  I have a 5th generation iPod Touch 32 GB, A1421 and my VoiceOver option and 'talk' to the selected text do not seem to produce any sound. I checked the volume control, changed vote, passed to the voice of Siri (Siri works very well), but it still does not. Also, the interface of VoiceOver works. Initially, I assumed that I had my iPod on mute, but no. I think it started when I updated to iOS 9.3.4. I was not using VoiceOver on a regular basis, but it was certainly a month or two ago. Any help would be greatly appreciated!

  Thank you

  Try:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  https://support.Apple.com/en-us/HT204184

  -Restore factory settings/new iOS device.

  If still problem is a bug in the iOS 93.4 or make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

  https://www.Apple.com/retail/Geniusbar/

• Cannot complete installation of Live TV. Media Center will not identify Directv remote. Is there a solution?

  I have a Dell PC with Vista Home Premium.  Until recently, when the operating system had to be reloaded, I watched decoder of live TV on Media Center for the past two years, using a Directv.  I have tried to re install the TV, but cannot complete the process, as my Directv remotes are not recognized.  The signal is fine (as of the previous steps shows the appropriate image and the signal, but the installation process cannot be performed due to the problem of distance not recognized. (The remote functions of the Directv box very well). How can I find use of the tv, Setup finish signal?

  Hello

  You won't get HDTV without a Digital Cable Ready tuner and a cable card. How about you
  will have need a HDCP compatible graphics card and a TV/monitor taking support this
  as well.
  The kit Hauppage offers is substantially the same as I told you.

  clear QAM availability varies according to the cable company. most begin to encrypt
  everything.

  > The same can be done through Windows Media Center, by clicking the video image by clicking on Zoom. But in MCE when you have a cable box, you will also need an approved Microsoft IR blaster to control the cable box. If you n? not have this part, you will get the IR hardware not found error. The HVR - 950 Q does not come with this, but if you really want to use Media Center, you can buy a kit from our online store here http://store.hauppauge.com/hardware2.asp?product=mce_remote remote"

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Center-cant-detect-dvrset-top-box-but-finds/43a9685d-d093-4cfa-88ac-17132a1e5b53

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cannot-complete-Windows-Media-Center-Setup-IR/6db1ada7-3380-44a2-A369-268e5cd7c013

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cannot-complete-Windows-Media-Center-Setup-IR/6db1ada7-3380-44a2-A369-268e5cd7c013

  http://Windows.Microsoft.com/VI-VN/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Center-will-not-set-up-TV-because-Windows/5c038734-7bb6-48D4-AAC9-f4dee9a3d442

• XPS 8300 will not identify data reader 5 to

  I have a desktop computer XPS 8300, Windows 7/64, 12 GB of RAM. Boot drive is a 500 GB SSD, and there is a SATA 2 TB of data. I'm a photographer, so I need a lot of data storage.

  I just bought a Toshiba MD04ACA500 5 to to use as a data drive (NO boot).

  My XPS 8300 can see the drive, but insists on the fact that it contains only 500 GB of storage, not 5 TB. I did the following:

  • Run Diskpart from a DOS window.
  • Run Diskmgmt.msc;
  • Run the tool to partition a third party
  • Also, I went through Windows KB 2581408 procedure of adding a player of great size.

  No matter what I do, the drive is detected as only 500 GB.

  The XPS 8300 is possible to work with a 5 TB drive? If so, how?

  Thank you, Ed

  Disks over 2 TB software needed to work with disks of large capacity and NEED 64 Bit Windows.  INTEL RST integrated in win7 is 8.x, which means that he WILL NOT see large capacity disks. Seagate manage it with the driver and utilities.

  • 2 t of learning beyond
  • Interactive Guide for disks more larger-Than - 2 TB

  http://www.Seagate.com/support/downloads/beyond-2TB/

  INTEL RST 10.1 at least is NECESSARY for advanced format drives.

  With windows vista or 7 install ATA mode then the microsoft patch is necessary before moving on to the AHCI.

  https://support.Microsoft.com/en-us/KB/922976

  Once passed to Ahci and work, you install the version of the RST that works for your model.

  Latest and most recent versions of the decline of the RST support more older chipsets.

  The latest 15 13 or 14 or 11 or 12 may not work.

  Before 9.x, it was called MSM (Matrix Storage Manager)

  It changed of MSM to RST in the 9.x versions.

  10.1 or greater is required for the GPT partitions greater than 2 TB.

  9.6 or higher is required for larger than 120 Gig aka advanced format drives.

  V9.6 driver Intel Rapid Storage Technology (RST) and above.

  http://www.Intel.com/support/chipsets/IMSM/sb/CS-031502.htm
  http://www.Intel.com/p/en_US/support/highlights/chpsts/IMSM

  9.6.0.1014

  https://Downloadcenter.Intel.com/download/15251

  10.1.0.1008 is the version of transition.

  https://Downloadcenter.Intel.com/download/20104

  10.6.0.1022

  https://Downloadcenter.Intel.com/download/20707

  11.0.0.1032

  https://Downloadcenter.Intel.com/download/20868

• Windows 7 pro will not identify disk hard esata

  I use dock cables unlimited Office. USB port works fine.

  I tried the steps above on a DELL Latitude E6510 laptop with Windows 7 and it will not consistantly recognize the drive eSATA external hard.

  Once the laptop has continued to view the contents of an external hard drive, even after having been unplugged.

  Thank you

  Chris

• LR 4 will not identify the 2nd hard disk in the source during import?

  I run 2 hard drives in my PC. A disc is only for programs. And the largest are for photos/music. When I go to import the source the left pane will not recognize the drive B:, C: drive only and he will recognize even my M: drive with is my outside. Im not sure what to do at this point to add the B: drive to the source. Thank you

  It is sometimes useful if you put a "fictitious" picture on a disk via Win Explorer. So, try this first and see if your player appears.

  If this does not help:

  Letter B is not a good choice for a player on a PC. It's because of the ol-old time when drive letters A and B were reserved for the disc x6.25 "(A) and the floppy disk drive (B).

  That's why the first drive in PC today is always named c. (letter)

  And, I don't know maybe that Lr does not recognize the drive letters A and B. So rename your drive B to the D drive.

  Do this in the Windows Control Panel > system and security > administrative tools > computer Nortsk > disk management. In the lower window where it shows your drives, highlight the drive in question and then go > Action > all tasks > change drive letter and path.

  For more information, open in your control panel and in the search box, type .

• TB will not identify PW for one of my email accounts

  I have three accounts of gmail, which I recently opened. I was able to set up the first two TB accounts without problem. When I opened the account of third parties, however, TB tells me that the password is incorrect. I tried several times and get the same message every time.

  I joined the site of gmail, offline and signed in. The same CI I tried to use in TB works perfectly on the site of gmail, so I know that it is correct. I even tried a copy and paste, to be sure I wasn't wrong he seized. But TB still does not recognize as valid.

  Anyone know what I'm doing wrong and how I can get TB to accept this account? This is my new work email, so I will continue to use the TB should I get it worked.

  Thank you.

    Harry Dreier
    [email protected]
  

  you have allowed to access 'less secure application' in your google settings?

• MacBook pro 2012 will not identify new SSD

  I just bought a macbook pro of 2012 and have used it for two weeks without flaws with my 250 GB samsung SSD drive. Now I tried to update the size and bought myself a Corsair Force THE 480 GB to use as the primary drive. I plugged it in, but the mac does not recognize the drive. So I formatted with another mac and tried again. Still no luck. Tried the old drive. No luck with that one or the other. So I knew the data cable from being broken. But when I plug a normal HARD disk it recognizes when in the main location. So the question is, what is the problem with the mac? I don't understand.

  And help will be greatly appreciated

  happyandconfused wrote:

  I plug a regular HDD when it recognizes in the main location.

  What is a HDD or SSD Samsung rotation?

  Have you plugged the SSD (both) external via USB and will the boot the MBP?

  When you have the SSD inside, can I none, one or two boot the MBP?

  Ciao.

• IMac 27 "10.11.3 suddenly will not identify Icloud password

  My computer was working perfectly until this morning, and it seems that a lot of my preferences have disappeared. The computer starts not in recovery mode or in safe mode. I can boot from an external drive for backup, but I want to reinstall El Capitan (sigh), but my password is not just recognized in the App store and I said 'contact support '. I have two other laptops that I could use with target mode, and all my files are backed up on an external drive and Dropbox. I have not done this for a long time and need some advice on how to reinstall El Capitan on my Imac. Have no idea how she became corrupt. The computer has a drive of Fusion and is around the age of 7 months. Have not contacted Applecare that I was not sure if they helped with a software problem.

  Since it is under warranty, why don't look you at the Apple Store for repair. If the drive has failed, it will be replaced free of charge.

  There are three ways to reinstall OS X. The first is to re - install on the existing system (must be the same version) which does not erase the drive. The second way erases the disk and reinstall the original version of OS X, which was preinstalled. This does not work if the computer came out before 2011. The third way is for the older pre-2011 machines on which you first need to install Snow Leopard after erasing the disc.

  You don't have a Lion installed, as indicated in your profile if you have an iMac which is only 7 months old.

  
  

  Reinstall El Capitan without erasing the drive

  Make sure that you have a current backup before continuing.

  HD recovery start:

  Restart the computer after the ring, press in and hold the COMMAND and R keys until the menu screen to appear.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Reinstall OS X: Select reinstall OS X and click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than Wi - Fi and more reliable.

  
  

  Install or reinstall OS X from scratch

  Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

  HD recovery start:

  Restart the computer after the ring, press in and hold the COMMAND and R keys until the menu screen to appear.

  Erase the drive:

  1. select in the main menu disk utility and click on the continue button.

  2. once the charges of THE select your boot volume (usually Macintosh HD) in the

  list on the left. Click on the Erase tab in the main window of THE.

  3. set the type of format Mac OS extended (journaled). If necessary, click

  Security and button all the option data from scratch in a single pass. Click

  the clear button and wait until the process is complete.

  4 leave FROM and return to the main menu.

  Reinstall OS X: Select reinstall OS X and click on the install button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible

  because it is three times faster than wireless.

  This should install the version of Mac OS X that you had installed it.

• Re Play memories home will not identify media

  House of memories of game downloaded yesterday gives following error message "he found videos that may not be imported from the camera" which is a Sony Handycam DCR - DVD 810.

  Information system is shown below.

  This is not the first time I tried to upload videos to share with the family, but I never got and Sony UK refused to help because I bought the camera in Australia. Sony Australia never have to respond to my email. So please, I would really appreciate the help.

  Operating system: Microsoft Windows 7 Starter
  Service pack: Service Pack 1
  System type: 32-bit
  Memory: 1013,1 MB
  Processor: Intel(r) atom CPU N450 @ 1.66 GHz
  Maximum clock speed: 1.67
  Manufacturer: Acer
  Model: Aspire One D255
  Setting system language: English (United Kingdom)
  Language setting: English (United Kingdom)
  Internet Explorer version: 9.0.8112.16421
  Network connection: Active

  Hard drive C:
  Free space: 164.5 GB
  Capacity: 215,8 GB

  Drive D:
  Free space: 3. 9 GB
  Capacity: 4.0 GB

  Drive Q:
  Free space:
  Capacity:

  Drive E:
  SONY DDX-C2000B USB Device

  nLoad

  What is the method of connection used during the transfer of video? You use a USB cable or Memory Stick Reader?

  On PlayMemories home (WPH), go to [help] - [about the TDC...]-[Supported Formats] and check if the MPEG2 is listed as a file format supported. If this isn't the case, it may be necessary to uninstall and reinstall the software, while the camcorder is connected via a USB cable. The connection between the camcorder and the computer is necessary to ensure that the support for the video format of the camcorder will be included in the installation.

  If my post answered your question, please mark it as "accept as a Solution.