Administrative authority

Similar Questions

• Message need to get an administrator authority, during the passage of the second hard drive.

  Original title: pass to the second hard drive

  My computer has two hard drives of 500 GB.  One is almost full.  I want to start using the other hard drive, however when I tried my computer said that I need the authority of a Director and that I don't have that power.  I am the only administrator on the computer, so I don't understand why it says that.  In addition, as the original hard disk memory becomes more complete, my computer crashes more.

  Can anyone help?

  Hi ColMarriott,

  Using a hard drive internal or external?

  You can try the second formatting hard drive after taking a backup of the data on the disk.

  If you use an external hard drive, you can try the following steps.

  a. connect the external drive.

  b. find the external hard drive in windows Explorer

  c. right-click on the drive and select format.

  You can check the following items and check:

  Install or remove a hard drive

  Create and format a hard disk partition

  Important: Make sure that you have backed up all the data before going forward with the format.

  Since the first hard disk is full and crashing, you can try to move some data and check only files not programs drive different or another location.

  Hope this information is useful.

• Not recognized as an administrator

  When I was installing Windows updates, a message appeared stating that I don't have an administrator authority to install the updates, even if I don't have one account on the computer. For this reason, I can't uninstall some programs because I am not "logged as Administrator". It is the first time I have encountered this problem.

  Hi RachelOn,

  Here's an old net which may have a few things to try http://answers.microsoft.com/en-us/windows/forum/windows_7-security/unable-to-log-on-the-user-profile-service-service/2c51ee80-8ff2-4aa6-b532-175b83b9c09a?page=3

  At this point, it may be that your accounts have been modified at the registry level and possibly the steps described in the thread above to solve.

• Corrupted administrator user ID

  I have 4 users on my laptop.  One of the ID of the user (mine) has the administrative authority.  The others do not.  For these days, I am not able to log in using my user ID.  Other nicks, I am not able to access my user account.  The error that says something like "the service user profile Service does not log. Could not load profile' and newspapers out.

  I need to know what I would do in this situation.

  Please see the links to solve this question below. "The user profile Service has no logon. Unable to load the user profile.

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  http://support.Microsoft.com/kb/947215

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• activation of administrator on windows 7 Home premium

  I used the transfer utility to transfer my credentials from a business laptop windows to a new laptop with windows home premium on it. When I first came to windows hp I discovered that my account is a standard account instead of a directors - even through the said account administrator type account when I drilled down he has been upgraded and would allow me to change it.

  In looking at some of the other threads, I tried a number of things, and that's what I found at work underneath for me.

  Signed my account
  Went to the Directory Windows/system32 and cmd.exe found
  Highlighted file name and right click
  Choose run as administrator from the menu
  Double clicked on the file
  The open command window
  Typing in net user administrator / Active: Yes
  Closed the command window
  Restarted
  The administrator now appear on the Welcome screen

  I tried the windows and R - key that did not work
  When I tried to type lusrmgr.msc I got the message that this was not supported in the home premium

  My question is - is this because my transferred account was account an administrator to start? Or was this coincidence I managed it - the Administrators account when activated is not a password on this subject and I guess I should create one - but I'm not sure what will do after the fact for utility and other windows. Anyone?

  Thank you

  My question is - on the screen - just to confirm - the user is in the Administrators group? I thought when I opened this window it would have the active administrator not the user standard active - so my assumption is that regardless of the user is set to the default screen to 'other' choice?

  Thanks again!

  If you set the administrator user, it will become a user with the administrator authority
  and he or she will be placed in the Administrators group.

  The best way to spend it is by pressing Windows + R and type"control userpasswords2".
  1. select a user from the list and click Properties.
  2 select the group membership tab.
  3 select Standard user (or administrator) , and then clickapply and then click OK.
  4. click on OK.
  
  Itknowledge24.com

• Cannot create a new user account account & comments pasted as an administrator. How can I activate built-in Administrator?

  It's a long story, but it is a case of me not having only not the slightest idea of what I was doing and the things themselves are mean. I tried to access the built-in function

  Administrator on my laptop, so I could create a password for it and to transform my only other account user in a standard account. The only way I knew a bit about this world work (at the time) was going to safe mode (already did this on another laptop of mine and it worked,) but the built-in administrator is not. Unfortunately, when I do my first mistake a lot of errors, I decided that I could force the built-in Administrator"is displayed by the guest in an administrator account so I could turn off my main user account. I realized that I couldn't change guest in standard account so I turned it off as an administrator. When I'm home in safe mode I finally see the built-in administrator so I put my password for it, but I noticed the UAC did not have a password field to type and 'yes' is gray. Thinking that it was because I left the account called Administrator, until I turned it off I go to reactivate it if I could go back to the standard, but the guest account would not change back or extinguish again causing the built-in Administrator "to disappear from the safe mode and therefore, preventing me from the question of fixing.

  I've tried so far of troubleshooting:

  (Start, typed the CDM, run as administrator, typed user administrator / Active: Yes) Having failed, I got msg "System 5 error has occurred. Access denied. "

  (Start, typed the CDM, run as administrator, typed net users) see three accounts on my computer administrator, guest, and my main account.

  (Start, typed the CDM, run as administrator, typed 'Jack' xxyyzz net user / add) Having failed, I got msg "System 5 error has occurred. Access denied. "

  I tried to create a new account, but it still says "the specified account name is not valid, because account names cannot contain the following characters / \ []" :;|<>+=,? ". ' * ' , but I don't use any of these at all!

  Change the Standard user account to administrator did not

  I tried to disable the guest account, but that didn't work either

  If anyone has ideas or definitive answers to how to help me solve this problem would be very useful, thx!

  The guest on my computer account has administrative authority.

  If your guest account has administrator privileges (why?) then you can do this:

  1. Log in under the guest account.
  2. Click the start planet.
  3. Type cmd.exe in the search box.
  4. Press Ctrl + Shift + Enter
  5. Click on "Run as Administrator".
  6. Type the following commands and press ENTER after each:
     NET user administrator / Active: Yes
     NET user administrator 123456
     (to set the password to 123456)
  7. Log in as administrator.
  8. Plan ahead a little and create, test, and document an alternative admin account, even though you have a spare House key. This will save you a lot of trouble.
  9. Demote, then disable the guest account. There is a security risk.

• 18.0.1 Firefox crashes after closing tab or output

  I installed Firefox 18.0.1 on 19/01/2013. It continues to crash when I close a tab or when I click on the file then exit. This problem affects on my account Administration Authority and authority of user account. My Norton Internet Security's current is Windows 7 64 bit.

  
  

• I have two profiles of Firefox. The default value is updated to the latest version. The second profile is version 3.6.25. I can not get the second profile to update to the latest version. How do I do that?

  I don't have administrative authority on this computer, but it has never been a problem before with the update.

  I don't have the chance to check this Monday. In the meantime, version 10 is out. I made sure that my default profile has been completely liquid and manually update the secondary profile, it closed and reopened and had the update. When I opened the default profile, there is not automatically updated but I was able to update without problem. I think I'll call it's good for now and see what happens the next time that we update. I always have our Manager to update the modules for me but because it is the only administrative authority. Thanks cor - el!

• Having trouble making a repair, then activating the product key

  Intel core 2 duo with a card mother asrock, the coa and the XP sp3 disc.

  I wanted to do a repair, because the system restore did not work.  Not so simple.  Need administrator authority, but did not know the password.  checked some forums and the administrator password has changed something I could remember and tried a repair.  Microsoft would not accept the product code, I seem stuck with a half finished repairs and can't go forward or back... help!

  Hello

  1. What is the exact error message?

  2. How are you trying to fix? (You initialize the system using disk or do you run the installation of the drive after starting from the desktop)?

  3. who is the manufacturer of your system?

  4 do you have. which type of installation selected? It should not prompt for a product key, when you perform a repair installation.

  Please answer the above-mentioned questions and provide us with any other information about the issue so that we can help you better.

  Please make sure that you type in the correct product key. Make sure that the caps lock is turned off. If you have another keyboard, connect it to the computer and type the product key

  If there are still problems, suggest him to contact Microsoft Customer Service and get the product key verified

  How and when to contact Microsoft and support Customer Service:

  http://support.Microsoft.com/kb/295539

• I use windows 7, the program file (x 86) always on the first day?

  When I used Windows 7, I don't know if I have the program file (x 86) in my system. Is it still there from the first day? Also, I downloaded a program called 360safe.wizard and I tried to uninstall several times, but I could not, he told me that I need an administrative authority, I don't know what to say since I am the owner of my own computer, isn't it quite authoritarian to control my own program files?, what authority do I need? Help, please!

  Thank you.

  Hello

  ·         You receive an error message?

  ·         Did you do changes on the computer before the show?

  If you are running the 64 bit version of Windows, then program (x 86) should be there.

  I suggest you to check out the Microsoft article and check.

  How to enable an application to run once with a full administrator access token in the UAC?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-allow-an-application-to-run-once-with-a-full-administrator-access-token-in-UAC

  You can also visit the article to know the version of Windows that you are running:

  My PC running the 32-bit version or 64-bit Windows?

  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  I hope this helps.

• If I have not access to the disk partition hard base would impact on the installation of a complete operating system?

  Original title: TPG Server petition.

  I wanted to know if I di not actually have access to the disk partition hard base would impact on the installation of a complete operating system of Windows 7 Home Premium 64-bit? Instead of having a computer with a complete installation of windows mine came with versions of WinPE OEM, NT and MCE. The GPT partition server that I can see is protected. Partial operating systems seem to be installed on network disk Volumes. I think that what I have to do down the disk hard real all delete and start again but I'm having a problem to see what is all about the drive through programs and remove what I find. He also seems to have a certain type of script hidden BIOS more wrinkles to retail and canceling all decisions on versions of the oem .cfg files. She configures and installs the server instead of windows 7 Home Premium 64 bit server software. The installation gives the highest administrative authority to the network administrators who I don't know and have never met and to manage my personal laptop. It creates a serious problem when I want to use my computer for one purpose and that some people I don't know and have never met want me to use my computer for something else.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps.

• Forgot my password for my Dell Inspiron 14r with Windows 8 OS

  I can not connect on my computer of subject.  It's been a while since I've used and you forgot my password.

  It is not connected to the internet and I only have wireless capability.

  When I try to log in, it says that my password is incorrect for my ID and use the last password entered on this PC.

  I don't have administrative authority and one administrator password.

  I just need to go beyond the requirement of password, connect starter.  The PC starts, brings me to a page of beginning where I drag the screen (it's a type of touch screen PC) or just click on the mouse and it brings me to my ID and asks for my password.

  Hope that there is a work around from there.  I haven't used this computer but maybe 3-4 hours in total and it's almost a year.  Guess I was just hesitant about learning a new operating system and stuck with my old PC.

  Can someone walk me out there in the way to solve this problem?  Do not hesitate to contact me at my email of husbands, * address email is removed from the privacy * or phone 615-430-5030.  It is the computer savy who try to help me with my mistake - forget my password.

  Thank you

  Shirley, with assistance from the Ed.

  Hello Shirley,

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with the password requirement. We will certainly help you with the same.

  If you have access to any other user on the computer account, try to change the password of the account to this account.

  You can try to follow the suggestions mentioned in the link below to reset the password and see if that helps.

  What to do if you forget your Windows password

  http://Windows.Microsoft.com/en-in/Windows/what-do-forget-Windows-password

  Also check out the link below to change or reset your password:

  http://Windows.Microsoft.com/en-in/Windows-8/get-back-blocked-hacked-account

  Please do not hesitate to write us again for assistance and we will be happy to help you come.

• Error NoPermission when the vCenter access is provided via the Group

  Hi all

  I installed the new vcenter 5.1.0 1123961 on 2012 OS Server (the server is joined to AD).

  If we give access to the user directly, they can log in via vSphere vCenter / Webclient with numbers.

  If we give access to the AD Group, and make user group member, admin users get error NoPermission.

  We have the administrator authority give the Group on the vCenter server, do not know what is the cause of the problem.

  
  VCenter server log.

  Vim. SessionManager.login: vim.fault.NoPermission:

  -> Result:

  -> (vim.fault.NoPermission) {}

  -> dynamicType = < unset >

  -> faultCause = (vmodl. NULL in MethodFault),

  -> subject = ' vim. File: Group-d1',.

  -> privilegeId = "System.View."

  -> msg = ""

  ->}

  -> Args:

  ->

  Tech VM ware asked to install 2.0 SSO, it is know issue in vcenter 5.1 AU

• help reqd with an advanced function of book of LucD

  Hey all

  Recently bought Luc relaxing book "Automating vSphere Administration" to help me understand how to create advanced (among others). I tried one of his scripts on pg 437 (Get-VMGuestDiskUsage) - as shown below. Problem is I have a few problems and I don't know what seems to be the problem. It could possibly be something very basic (but having worked on it for a week) I'm at the end of my home as to what it could be? Any help would be great appreciated ly

  Problem 1) every time I try and entry of the virtual machines via the pipeline, be they of a txt file or a simple 'get - vm"command I get

  Get-VMGuestDiskUsage cmdlet in the command pipeline position 1
  Provide values for the following parameters:
  (Type! help.)
  VM:

  AND then

  
  

  Cannot process the transformation of argument on the parameter "vm". Could not convert the "" value of type 'System.String' to type 'VMware.VimAutomation.ViCore.Impl.V1.Inventory.VirtualMachineImpl '.

  I understand that it is because the input objects are of type "System.string" and what I need is a type of "VMware.VimAutomation.ViCore.Impl.V1.Inventory.VirtualMachineImpl". But his declared top so I do not understand?

  Problem 2)

  Where it is said $objDisk | Add-Member - MemberType Noteproperty-Name 'Use %' - value ('{0:p2}' f (($disk.capacity-$disk.))) FreeSpace) / $disk. Capacity))

  There seems to be a problem with the DIVISION operator (this does not work when processed against the ($disk.capacity - $disk.freespace) value) I tried to get into things like 1 MB ', but every time I have replace their return with $disk.capacity I do not get the output? !!! ??

  I know that it can be easy for the 'gurus' out there, but I realized how convenient these advanced features are, and as soon as I can get my head as to why this is happening, I hope I'll be able to improve what I learned a lot faster. I simply can't work and so desperately need your help. Why did I NOT?

  The script is below and I copied exactly from the book (the only thing I added was a call at the bottom of the function of an entry by calling the real function (for example, Get-VMGuestDiskUsage)

  Once again thanks a lot in advance for any help

  Munster99

  Function Get-VMGuestDiskUsage {}
  < #.
  . LOGBOOK
  Gets a guest VM OS disk usage information
  . DESCRIPTION
  This function creates a report with the VM guest operating system disk usage information
  . NOTES
  Source: Automating vSphere Administration
  Authors: Luc relaxing, Armin Van Lieshout, Jonathan Medd,
  Alan Renouf, Glenn Sizemore
  . VM PARAMETER
  The computer object virtual to create a report on
  . EXAMPLE OF
  PS > Get-VMGuestDiskUsage - VM (get - VM Win *)
  . EXAMPLE OF
  PS > Get - VM | Get-VMGuestDiskUsage
  # >

  [CmdletBinding()]
  (Param
  [Parameter (mandatory = $True)]
  ValueFromPipeline = $True
  HelpMessage = "Enter a VM object")]
  ([VMware.VimAutomation.ViCore.Impl.V1.Inventory.VirtualMachineImpl] $vm)
  
  {IN PROCESS
  # Hide the errors that appear if VMware Tools is not installed
  # or VM is PoweredOff
  $ErrorActionPreference = "SilentlyContinue".
  
  $vm = get - VM ($_)
  
  {foreach ($disk in $vm.guest.disks)}
  $objDisk = New-Object system.object
  $objDisk | Add-Member - MemberType Noteproperty-VM name-value $vm.name
  $objDisk | Add-Member - MemberType Noteproperty-name of Volume-value $disk.path
  $objDisk | Add-Member - MemberType Noteproperty-CapacityMB name-value ([math]: Round($disk.capacity/1MB))
  $objDisk | Add-Member - MemberType Noteproperty-FreeSpaceMB name-value ([math]: Round($disk.freespace/1MB))
  $objDisk | Add-Member - MemberType Noteproperty-Name 'Use %' - value ('{0:p2}' f (($disk.capacity-$disk.))) FreeSpace) / $disk. Capacity))
  $objDisk
  }
  }
  }

  Get-VMGuestDiskUsage

  Remove the last line in the .ps1 file, then point the new .ps1 file source

  . ./Get-VMGuestDiskUsage.ps1

  Then, on the command line to do

  Get-Command Get-VMGuestDiskUsage

  That should tell you if the function is known to the PS engine once you point of origin of the .ps1 file.

  If it is known, just do

  Get - VM MyVM | Get-VMGuestDiskUsage

• FF to crash immediately. Updated FF, authorized administrator, disabled hardware acceleration, Add - ons mode disabled

  FF to crash immediately in normal mode - ID: 132f75b1-9f3e-46b7-9b43-74e4b2121121. FF, put up-to-date, authorized, administrator mode disabled hardware acceleration, disabled add-ons.

  FF opens in Mode safe, but otherwise crashes repeatedly at the opening. FF worked for time, up to half, but today (especially since the update of FF v.17) crashes immediately. As well as repeated ff crashes, Win 7 crashes (less frequently) with a variety of notes for each accident.

  (email removed by mod)

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/