Administrative problems

Similar Questions

• Toshiba L300 BCI administrator problems

  I just got one of these books and I found that even though I have an administrator account, I don't have admin rights.
  This means that an error message appears each time I want to play Halo: THIS multiplayer mode, saying: "make sure you have admin privillages.
  This also applies whenever I want to change my hard drive and when I use winrar to unzip programs out there.

  It is said that "the system cannot find the file specified" or "access denied." Any help I can get will be much appreciated, thanks!

  Is your laptop preinstalled with the factory settings or you have installed Windows XP Home clean?
  I mean this game is for Windows XP Home edition. Am I right about that?

  The fact is: with factory setting you do not have this limitation and you can use winrar or winzip with no problems.
  I use it for years and I have never, but never seen anything like that.

• Windows credentials have been disabled by your system administrator problem

  Windows 7 PC to c:\windows\system32\config\systemprofile\desktop is not accessible.  access is denied.

  checking my account 'owner' has of credentials have been disabled by the windows system administrator.  There is no other account on the PC, except 'owner '.

  I can't make another account apparently because I have no right to system more.

  can someone help me out here?

  Suggestions:

  1. If you go in Safe Mode, will you be able to run a full scan of your account?

  2. in safe mode, find you the admin rights at all?
  If so, do a system restore. Choose a date when you don't have a problem as your restore point.

  3. in safe mode with networking, you have administrator rights to download?
  If so, please download Malwarebytes. It is very good for fishing to the virus. Use it.
  If you are unable to download, you can go to your friend who has a computer, download the Malwarebytes and burn it to a flash drive or a CD, take home and run it on your computer.

  Link to download Malewarebytes:
  http://www.Malwarebytes.org/MBAM.php
  Way scroll and select the FREE download version. No need to buy it. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• System administrator problem

  I am trying to download ITunes, but after I receive that day, I read "the system administrator has set policies to prevent this installation." I am the system administrator, but I can't solve this problem. Any suggestions? Thank you... M.

  You may have a more serious problem which is malware:

  Download ESET Removal tool
  Burn it to a CD or create a USB bootable thumb with her:
  http://www.eset.com/us/download/utilities/
  ESET are Live is a live Linux distribution which can scan malware and clean infected files. It runs from a CD/DVD or a USB device, regardless of the host operating system, but has a direct access to the system disks and files. This will eliminate the threats which, under normal conditions, can be impossible to remove.
  Download and create your ESET are Live drive
  You can also try to do a system restore before you start experiencing this problem:
  http://pcsupport.about.com/od/fixtheproblem/HT/system-restore-Windows-7.htm
  There are some that will hide your files/folders so that you don't normally see them. I strongly suggest to run a scan on your computer with your antivirus/antimalware software. If you need to, you can also use the Microsoft Safety Scanner, it's free:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Also, if your files are hidden, check out the following article on how to display the:
  http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files

• GANYMEDE + Administration problem reports

  Once we improved GBA to 4.1 Build 23 (1) 3.3.4 we no longer get the information in the report of Administration GANYMEDE files +.

  AAA new-model

  AAA-authentication failure message ^ CC connection failed, Please Try Again. ^ C

  prompt password authentication AAA Non_TACACS_Password:

  AAA-guest authentication username Non_TACACS_Username:

  AAA authentication login default group Ganymede + local

  AAA authentication login no_tacacs local

  the AAA authentication enable default group Ganymede + activate

  AAA authorization config-commands

  AAA authorization exec default group Ganymede + local

  AAA authorization commands 0 default group Ganymede + local

  AAA authorization commands 1 default group Ganymede + local

  AAA authorization commands 15 default group Ganymede + local

  AAA authorization network default group Ganymede +.

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 0 arrhythmic default group Ganymede +.

  orders accounting AAA 0 NetAdmins arrhythmic group Ganymede +.

  orders accounting AAA 1 by default start-stop Ganymede group.

  orders accounting AAA 7 by default start-stop Ganymede group.

  orders accounting AAA 15 by default start-stop Ganymede group.

  AAA accounting system default start-stop Ganymede group.

  Hello

  It is a known issue, you must apply the hotfix ACS 4.1.1.23.5 to solve the problem.

  Patch for the unit is available on

  http://www.Cisco.com/cgi-bin/tablebuild.pl/ACS-Soleng-3DES

  The patch name: ACS SE 4.1.1.23.5 rollup

  Patch for windows acs is available on

  http://www.Cisco.com/cgi-bin/tablebuild.pl/ACS-win-3DES

  The patch name: ACS 4.1.1.23.5 rollup

  That should solve the problem

  Kind regards

  Jagdeep

  Note: If this answers your question, then please mark this thread as solved, so that others can benefit from.

• wireless connection with the non-administrateurs problem

  We use our cell phones to A60122 satellite with Windows 2000 in a windows 2000 domain.

  Only a local administrator can use the wireless network adapter. Any other user gets a ' no connection / cable disconnected "error. They cannot even log on - field not found.
  With the wired carte_reseau, everything works fine.

  Someone at - it an idea where to start looking?

  Hello

  Have you tried to give rights of administration for all users?

• Administrator problem

  I just bought the computer today and im trying to download World Of Warcraft. When the attemps computer to download updates it gives me a message saying that I'm not on the administrator account for the computer and I can't download the update unless I log on theadmin account. There is that one account on my computer and I looked and I was connected to this account and it has been labeled as administrator. Any ideas?

  Thank you

  Hi naison82083,

  Thank you for using answers Forum.

  You can right-click on the icon of World of Warcraft that starts the program and click "Run as Administrator".
  Your password can be asked to you.

  I hope this helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Administration problems.

  Hello Sir,

  I use windows vista Home premium and I am the administrator. I don't know why sometimes I am blocked and given the message to the approval of the administrator of the computer. I turned on my guest and my account is protected by a password. I decided once save and delete files from my C: drive, but I have been restricted. A notification came that I need to contact my administrator in order to save or delete files in this player.

  I would also like to restrict the opening of my readers, I mean my drive C: and E: invited on my computer.

  I would be very grateful if my issues above are given to solutions. Thank you.

  1. it's the way Vista works. You have an administrator account (which is a bad habit, see "General recommendations" below) but you still need approval super user to access protected areas of the operating system.

  2 disable comments once again. Do not use the guest account, you see in the user accounts applet in Control Panel. The guest account is a special system account, not one for when you feel hospital. For some reason, it is disabled by default in Windows XP, Vista, Linux, Unix and OS X.

  On TechNet:

  "The guest account is intended for users who need temporary access to the system. However, if this account is activated, a security risk may exist because an unauthorized user could have anonymous access to the system through this account. »

  http://TechNet.Microsoft.com/en-us/library/bb418978 (TechNet.10) .aspx
  So if you have enabled comments, turn it off now and create a standard/Limited (Vista, XP Professional/XP Home) for your visitors. Call the new user account to something like "visitor".

  3. you cannot prevent an another user to access the disk system (c :)). Restrict you users in defining of the passwords and permissions on folders.
  Vista identity management and access - TechNet - http://tinyurl.com/6fncvr control

  4. the general recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is an OS multi-user with system built-in accounts such as administrator, by default, all users and guest. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

• Impossible to uninstall the applications due to administrative problems.

  Original title: I think it's a virus

  I can not uninstall a lot of apps or install them

  It is said

  You must be an administrator to remove this application.

  and this is the administrator account.

  2. I can not format the or even install another, that he always says

  the specified service does not exist as an installed service.

  I hope that respond you quickly.

  Hi, Ahmed.

  Thanks for posting your query on the Microsoft Community.

  Good answer:

  1. what applications you are trying to uninstall?

  2 is the issue limited to one application or several apps?

  I suggest that you try to uninstall the application in Mode without failure.

  1. click on the link below and follow the steps to go to the safe mode

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  2. press the Windows icon and select Control Panel.

  3. follow the steps in the link below to uninstall the program.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-in/Windows/uninstall-change-program#uninstall-change-program=Windows-7

  If you think that your system is infected, you can run an antivirus scan and check.

  I hope this helps. Please respond if you have related research.

  Kind regards

  Jesinta Rozario

• * Windows ADMINISTRATOR PROBLEMS

  Hello:

  Recently I just changed my password, I AM the ADMINISTRATOR. I also have a 'secondary' account and the different password than my administrator password. I did not write the new password correctly, or just simply, I made an error along the line, somewhere.  I have ALL my work, (OFFICE, CONTACTS, FAVORITES, ETC.) along my ADMINISTRATOR account. How can I get my the ORIGINAL ADMINISTRATOR account. When I handed the password again, looks like its on the secondary account, even if I use the administrator account to log on. I'M trying to GET in my ADMINISTRATOR account on the ORIGINAL, but not luck. I did the where MS calls you back, but I STILL can't NOT GET in to my original administrator account.

  I would BE VERY HAPPY any help that is given.

  Thank you

  * Sorry for the delay in getting back to you. In my area of the country, we have had to deal w/winter SNOW and ice (which is much worse than the SNOW). Then I had an emergency dental surgery; then we had an emergency home a/c HEAT to deal with as well. ANYWAY, the computer keeps an office supplies store, where they had to re - install a new W7 os on my computer. Almost everything works OK now, auf OUTLOOK. You use Hotmail, I could go in OUTLOOK w / all my contacts and email and other things. Now, it seems that I can only go into OUTLOOK and "start over". Nothing 'Hotmail', came to 'outlook', but guess that do that slowly.

  THANKS AGAIN for your help.

• Installation of the Creative Suite - administrator problem

  I had downloaded from the Site of Adobe Creative Suite. I started to install it in the .exe file, and eventually received a message that I need administrative privileges. I am the administrator and the computer says that I can not change for standard-setting action?

  Hi DrDaveSN,

  Right click on setup.exe and run as administrator. If still the same number then try to install hidden admin account: http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista / .

  Kind regards

  Romit Sinha

• When I try to install a program, I get the message the administrator won't let me do

  Administrator problems

  When I try to install a program, I get the message the administrator won't let me do. It's my computer. I am the administrator and no one else uses my computer. How to go beyond that and install the program, I need?            Allienne

  Hello

  Try right click on the setup.exe from the program - then run as administrator

• I'm administrator, but do messages telling me that what I want to do is forbidden by the administrator and verify with the system administrator

  original title: administrator problem

  I am the administrator with a password (in fact the only user of my computor) but continue to receive messages telling me that what I want to do is forbidden by the administrator and verify with the system administrator. How to work around this problem? My os is Vista Home Premium.This happens more frequently when I try to remove a program

  According to what "program", you tried to 'delete '.

  If one of these programs to the system, you will get the message.

  If it's one of those programs that you have installed from the web, try one of these programs to "Uninstall" part 3:

  Revo Uninstaller 1.91
  http://download.CNET.com/Revo-Uninstaller/3000-2096_4-10687648.HTML?tag=mncol

  IObit Uninstaller 1.1
  http://download.CNET.com/advanced-uninstaller-free/3000-2096_4-75157230.HTML?tag=mncol

  Advanced Uninstaller Free 10.1.1
  http://download.CNET.com/Revo-Uninstaller/3000-2096_4-10687648.HTML?tag=mncol

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Problems with the WLAN configuration

  I can connect my raspberry using PuTTY on a static IP, but it does not work using WLAN.

  WLAN using my router sees a device no is not an IP address, which I suppose Raspberry.

  I guess that the tutorial is wrong, as it provides the same IP for the eth0 and wlan0, and it does not show the 'network' line in the section wlan0.

  Or I do something wrong?

  Here is the final solution to my problems. At the same time, there had been several configuration errors:

  1. I provided the two devices, eth0 and wlan0, the same IP address, as has been requested by the guidelines of Tom. Of course, this won't work. I had to provide separate IP addresses as @stainsb correctly pointed.
  2. My router was set to "isolate the wlan" which means that wlan is routed to the internet but not lan. Certainly to be able to communicate between lan and wlan, there must be no insulation. So I dropped this security feature.
  3. My router was set to "restrict the mac addresses" which means that only devices can connect to WiFi. Of course, I had to relax this restriction by adding the MAC of the WiFi dongle to the list of allowed devices.

  With this three changes I use eth0 and wlan0 successfully at the same time!

  BTW, it was not necessary or use wpa pairwise or wpa-group, as suggested by @khooke_acn.

  Thanks to all and sorry for bothering with my stupid administrative problems!

• Warranty issues-say no to Apple

  Hello

  I have buyed Mac book pro about 8 months and is still under warranty. One day Mac book has been ask for password and I had no idea what to do. Although pass the incorrect entry code the mac book is disabled.

  I took it to the after-sales service b2xx Pacific Mall Ghazibad, India, with the original invoice and macbook in which after the diagnosis, the Center said that they can not fix the issue offer any resolution and mac book, I bought is a piece of bin now and Apple offers no replacements, also in case of warranty. The same information is documented by the service center in their report of delivery.

  I contacted Apple in India contact center where support promises were made by Mr. Shrikant but right now no solution from Apple.

  If representative of apple is around please update with the resolution or legal platform is the only platform for Apple products.

  Rgds,

  Valentin Vikrant

  "Tell Apple".

  It is a forum to a user, is not endowed by Apple employees.  You have an administrative problem which cannot be solved by Apple where you are.

  Ciao.