Administrator to install the printer software

Similar Questions

• Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  The duplicate thread information:

  Cannot connect Epson scanner/Nikon camera to printer!

  Hi Carolyn has Culp,

  
  Thanks for asking this question to Microsoft Community!
  
  I understand that your scanner and Nikon camera is not getting recognized in windows vista.

  He would be grateful if you could answer these questions. This will help us to a better way to get a resolution of the issue.
  1. have you made changes on the computer before this problem?
  2. What is the brand and model of the scanner?
  3. are you an error message or error code?
  4. is that your other USB devices work?
  I would suggest trying the following methods and check if it helps.

  Method 1:
  

  Try connecting to another USB port and check if the camera is detected or try to plug the camera on another computer.
  Method 2:
   
  Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us
  Method 3:
   
  Remove and reinstall all USB controllers.
  To remove and reinstall all USB controllers, follow these steps:
  (a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
  (b) click on the Hardware tab.
  (c) click the Device Manager button.
  (d) expand Bus USB controllers.
  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (f) restart the computer and reinstall the USB controllers.
  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
  
  Method 4:
  To update the chipset drivers and check if it helps.
  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Reference:
  The problems of scanning: http://windows.microsoft.com/is-IS/windows-vista/Troubleshoot-scanning-problems

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• error 101-1335 while installing the printer software

  I am trying to install my printer software and was the error message 101-1335 on a cabinet "data1.cab" being corrupted MSI so the install fails. I am using XP but noticed that someone who uses 7 becomes the same msg of error for its product from Kodak. How can I fix this please?

  Download the latest drivers for Kodak and try installing using these drivers.

• "To install the software, you must log on as a member of the Administrators group" when you try to install the printer software

  Original title: Installation software error

  I am trying to install a wireless printer Canon on my new laptop Dell with Windows 8 but I get error: to install the software, you must log on as a member of the Administrators group.  I'm naïve - I'm the only person who uses this laptop and have used the one and the only password for the connection.

  Solution... for me at least:

  (First of all, copy the installer to a flash drive)  I use Windows 7 Enterprise and have tried many combinations to run the installation program. The bit end who works is to restart the computer, connect to the machine as an administrator or another local user on the computer that is part of the local Administrators group, THEN Rclick Installer and run as administrator.

• I have to install the printer software complete on all 3 computers on my wireless network

  Range of printers all-in-one color Laser HP CM1312 (USB connected to the Dell desktop computer) Windows XP - 32 bit

  HP Deskjet F4280 all-in in color printer (USB connection for HP Desktop) Vista

  Dell Windows XP 32-bit laptop

  all computers connected wireless to my network

  printers appear on all three computers, but will not print documents on the Deskjet F4280 printer?  Even the office connected directly to the F4280!

  Do I need to install the complete set of the software of the printer to the printer on EACH computer, or the device software to connect to each workstation?

  Hello

  To get all the features of each printer, you must install drivers and applications of EACH printer on EACH machine except when configuration allow pinters to join the wireless network

  Kind regards.

• drive hard printer - I inserted the disc to install the printer software, but my PC cannot read

  Installed a printer but when I inserted the disc that comes with it, my pc can not read.

  Hello

  ·         The computer will read other discs?

  Try to insert another disk and check if the problem persists.

  I suggest you run the Microsoft Fix tool of the web link that will help automatically detecting and fixing common problems below.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

  See also the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope the helps of information. Please post back and we do know.

• Try to install the printer software, but it says cannot find Serscan.sys

  I'm trying to get an HP printer to work.  The software will not end because it cannot fine Serscan.sys.  As far as I know all my service modules are underway.  How can I get Serscan installed?

  I have no more drive.  I'm sol?

  I'm not clear on the problem now. If you can find Drivers.cab in the c:\Windows\Driver Cache\i386 folder, then you should be able to look inside the it with something like WinZip or WinRAR and extract the SerScan.sys file on a location that can reach the installation of HP.

  By the articles in the Microsoft Knowledge Base, I know that there are two legitimate versions of SerScan.sys, one for XP SP2 (ver. 5.1.2600.3029) and the other for XP SP3 (ver. 5.1.2600.5612). You need the right version for your own XP, so getting the Drivers.cab file on your own machine is the best method.

• When you try to install the printer software, I get a VC80. Error CRT

  Error messages

  When you try to load the software for the HP Deskjet F4400 I just bought, I got an error message of Microsoft VC80. CRT, processor Architecture = "x 86", the key public token = "If c8b3b9a1e18e3b", version = "8.0.50727.91" type = "win 32", does that mean? I am not computer savvy and I have no idea how to fix. We receive many messages of error with this computer I don't know how to fix.

  Computer HP laptop Pavilion Entertainment PC model dv2 - 1028ca

  Hello

  Follow these steps:

  
  Step 1: download and install: Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=766a6af7-ec73-40ff-B072-9112bab119c2&displaylang=en#Filelist

  
  Step 2: browse the location c:\windows\winsxs folder and rename the folder winsxs to winsxs.old.

• Runtime error trying to install the printer on laptop software

  I have a laptop HP with Windows 7 Home Premium SP1, my printer is a HP photosmart c5580 AIO. It prints well but without software of the printer on the laptop I can not scan to the computer and use all the features of the printer.

  That being said, I am now trying to install the printing software Online and cd and I get Microsoft C++ runtime error and it will not install software.

  Ive tired all convenience stores of HP, etc, etc...

  Help, please

  Sunny

  Hi sunny1881,

  Welcome to the HP forums!

  I see you have a Photosmart C5580 which becomes a Microsoft C++ runtime error when you try to install the software. I'm sorry to hear that, but I will certainly do my best to help you!

  I would recommend that you follow through this Re: Error message Microsoft visual c ++ runtime library through my colleague @SuperMario1 as these steps should be able to help solve your problem. This is a long thread, but the steps should help, so take your time and work through it.

  I would like to know how it goes for you

• We get 0 x 00000704 error. "The specified port is unknown" during the installation of the printer software.

  Original title: error 0x800f0243

  I tried to install the software for my 9130cw mfc via a wireless connection and I got this error, followed by an error of 0 x 00000704.  "The specified port is unknown."

  Ive had no problem installing the rest of the printer on my other laptop... but now its giving me a problem on these new.  Any help is welcome

  Hello

  Please write to us.

  The question you are faced to could be due to incorrect settings of the printer.

  To better understand the issue, I want to know:

  1. What is the brand and model of your computer?
  2. Have you installed the printer software on the other computer via the wireless connection/USB port?

  Please, try the following steps and check if that helps.

  1. Press the Windows key + R key, type control, and then click Ok.
  2. In all the elements of the Control Panel, click on devices and printers.
  3. Then double click on Add a printer , and then choose Add a network, wireless or Brother MFC 9130cw printer.

  Feel free to write us again if you have other queries, comments or suggestions using your Windows.

• Cannot install the printer HP officejet 4500 Windows 7

  Original title: HP officejet 4500 printer is not able to install successfully on windows 7 64 bit ver

  Good day to all,

  I have a printer above that connects port router thro is not able to install successfuuly using portable computers that are running windows 7 64 bit ver, uninstalled hp program and delele registry still same.i have try vista laptop with a utp cable from office windows xp and laptop wireless with the computer it works fine. Pls help and your promt response is very much appreciated.

  Moved from Vista devices and drivers Forum.

  Hi Benoit,.

  Good day to you and thank you for posting your query in Microsoft Community.

  I understand that you are unable to install the printer on Windows 7. I'll be happy to help you with your query. However, let me ask you a few questions;

  1. What happens when you try to install the printer?
  2. You receive an error message? If Yes, what is the exact full error message?
  3. You try to install the printer for the first time to Windows 7?
  4. Remember to make no change in the computer before the show, if it was installed before?
  5. What is the brand and model of the computer?
  6. You are able to install the printer to Windows 7 via USB cable? If not, what happens when you connect the printer (via USB) to Windows 7?

  There could be various reasons that you can not install the printer. There could be a possibility if you try to connected the printer for the first time, you need the printer software. If it has been installed in the past, it could be any conflict of third party software. Let's try the methods below and check.

  Method 1: Download and install the latest software of the printer from the printer manufacturer's website and check.

  Enter the exact model and series type the following link and install the printer software.

  Driver downloads &

  Method 2: There are several ways to connect a printer to your computer. An option that you choose depends on the device itself, and whether you're at home or at the office.

  Please see: install a printer

  Method 3: If the printer has been installed in the past, perform the clean boot in order to avoid any conflict of third party software and check.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  From now on, try the methods above and let us know the result as well as the answers to the questions. We will be happy to help you further.

• Try to install the printer HP LaserJet 5if gives errror "operation could not be completed.

  Win7 + HP LaserJet 5if

  Hello, I have instaled windows 7 RC, and I try to add network printer HP LaserJet 5if.
  Windows has been find printer, but when he tries to install the driver I see massage:

  Printer driver has not been installed.
  Operation could not be completed (error
  0 x 0000002).

  No idea which can change to install this printer?

  Hi kkriss,

  Thank you for using answers Forum.

  The network printer is connected to a XP computer?
  Are either using a 64-bit version of Windows?

  I suggest visiting the manufacturer's Web site to see if they have Windows 7 drivers or at least Vista drivers.

  I also propose to sign in as an administrator to install the printer.

  Please let us know if that helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• wireless printer shows offline and impossible to reinstall the printer software

  original title: offline wireless printer

  my printer is offline and it wont let me not reinstall the software? I also restored the computer to a date where he worked and which did not help... It works when I plug in the usb cable, but not through the wireless... but my Wi - Fi works on the laptop... operating system 64-bit of Windows 7

  Hello

  1 did you recent hardware or software changes to your computer before this problem?
  2. what exactly happens when you try to install the printer software? You get the error message?
  3. what exactly happens when you try to print by connecting the wireless printer?
  4. What is the brand and model of the printer?

  Uninstall the printer drivers and related software, and reinstall them.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

• Photosmart Premium C309-g: the drivers and the printer software will not be installed.

  My network all-in-one Photosmart Premium C309-g worked very well on my desk until recently, when suddenly the HP software could still see and connect to the printer, but Windows 10 could not. I tried to remove the printer and uninstall all associated software, then tried to reinstall the software. Unfortunately, the installation will not get to the point where it starts and then suddenly disappears with no trace of her still running in the background. I can deviate from the default installation and bring to the top of the page to select the components that I want to install, but when I do the button 'ok' on this page does not work. No matter how many times I click on it, the page remains open and the installation will not so fast. If I click Cancel on this page, it disappears and the installation back to the previous page, where I can choose to continue and happen almost immediately out of sight again. This happens whenever I try to install selected software and drivers. I deleted the printer from the devices page in the Panel, I made sure to this it is not is more listed in the Manager of peripheral devices (printers and imaging devices), I removed the Windows 10 print queue and I deleted all the data of the folder under the Program Files (x 86) HP folder on my hard drive. I also disabled Windows Defender and run the installer as administrator, yet none of these steps help the process at all. I have never, in my 20 + years using nothing other than printers HP, encountered a problem like this. I'm used to receive error messages during the installation of software to fail, but I have never had a process simply disappear from the computer without leaving any trace of never having run. I hope that someone out there has an idea, that I have not thought yet, transferring files to my tablet to print from becomes a pain in the rear.

  A man who took the freedom of another man is a prisoner of hatred, he is locked behind bars of prejudices and narrow-mindedness. I am not truly free if I take freedom away from someone else, as surely as I am not free when my freedom is taken from me. The oppressed and the oppressor similar are stripped of their humanity.
  ~ Nelson Mandela

  Welcome to the HP Forums @GarfieldFan1969,

  I understand the printing software will not fully installed for your Photosmart C309 on your system Windows 10, and I wanted to answer with my suggestions for trying to help! Here are my suggestions for you to try. When you are finished, please let me know the results and problems or errors that you may encounter!

  First step: clean boot, restart the PC and try the install again.

  1. start by typing "msconfig" in the search box of Cortana, and then click MSConfig (run command)
  On your keyboard press Windows + R key at same time and type Msconfig in the run window, and then click OK or press ENTER.

  2. now, choose Selective startup

  3. Remove the check of the Load Startup items

  4. click on the Services tab

  5. check "hide all Microsoft Services" and then click on disable all

  6. click apply , then OK

  7 restart the PC and temporarily disable firewalls or antivirus programs

  8 run the Installation Wizard for Windows HP printer to install the printer

  9 turn on the firewall and start services

  Second step: you unregister and re-register the Windows Installer Service:

  1. hold down the Windows key + R to fill the box "Run" and type cmd.exe, and then click OK.
  2. at the command prompt, type msiexec /Unregister , and then press ENTER.
  3. at the command prompt, type msiexec/regserver, and then press ENTER.
  4. at the command prompt, type exit and press ENTER to close the command prompt.
  5. run the Wizard for Windows HP printer installation

  Step 3: run System File Checker Scan (up to 3 times) to repair the corrupted system files:
  1. go to start
  2. type CMD
  3 right-click and run as administrator
  4. to check and repair the OS type sfc/scannow (note the space between sfc and ' / ')

  You may need to run this upward to 3 times to solve all the problems

  When finished, it will say one of three things
  Windows did not find any breach of integrity (a good thing)
  Windows resource protection found corrupt files and repair the (good)
  Windows resource protection found corrupt files but was unable to fix some (or all) of them (not a good thing)

  Try to reinstall the printer.

  Step 4: activate the built-in Windows administrator account

  source

  1. first of all, you'll need to open an administrator mode command prompt by right-clicking and choosing "run as Administrator" (or use the shortcut Ctrl + Shift + Enter in the search box).

  Note that it works the same in all versions of Windows. It just search for cmd and then do a right-click on the icon of the command prompt in the start menu or the boot screen.

  

  2. If you are in Windows 8.x or 10 you can click on the Start button and choose to open a command prompt in this way.

  

  3. now type the following command:

  NET user administrator / Active: Yes

  

  4. you should see a message that the command completed successfully. Log out, and you will now see the administrator as a choice account.

  (Note that this screenshot is for Vista, but it works on Windows 7 and Windows 8 and Windows 10)

  

  You will notice that there is no password for this account, so if you want to leave it enabled, you must change the password.

  Try to reinstall the printer.

  

  Testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• Printer error "make sure that the printer software is installed and activated this scan from the computer via the printer software.

  Original title: print printer print

  I try to analyse some documents in pdf format, which I can send an email. It works fine last night but this morning I receive a message that says make sure that the printer software is installed and that this scan on the computer is enabled via the printer software. BN

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/