Similar Questions

• I use Photos to make a schedule, and when I add national holidays and have a personal calendar already selected for the import, national holidays replace a personal date when the two entries in conflict.  Any suggestions?

  I use Photos to make a schedule, and when I import two calendars of Mac, I can't play well together.  By example, if I add the national holiday calendar to a personal calendar already selected for the import, national holidays replacement a date personal when the two entries in conflict.  Users are allowed to several elements to show on a given date (I can add an article manually; and if I have two elements in a personal calendar, they both matter very well).  Does not seem serious if I import successively or simultaneously, the holidays always seem to prevail on personal items.  I am proud of my country, but want to avoid adding those who back in manually (and avoid having to check everything so closely).

  Any suggestions?  Thank you

  John

  (running Yosemite on a mini 2015)

  

  There is no way to have both separate schedules added and share a date.  Tell Apple what missing features you want restored or new features added in Photos via https://www.apple.com/feedback/photos.html.

  You could create a new calendar with personal anniversaries and holidays.  I think that would be the case with the exception of those holidays that might change the date to when if fell, which is Memorial Day for one.

  

• where can I find the chassis for the import file in MAX to draw the circuit diagram before you buy

  where can I find the chassis for the import file in MAX to draw the circuit diagram before you buy

  chassis: NI SMU-1078

  ini file to import into MAX

  See attachment

  THX

  Hi again Koen,

  Unfortunately, you can't simulate a complete PXI system, so we do not have the ability to simulate a PXI controller unit. The simulation, you can do is to set up the cards you want to use in you.

  concerning
  Lars

• Best way to import iPhone 4 video in first Pro CS5 - settings for the import of new "preset sequence?

  Shooting video with my iPhone 4 (ATT version) and try to import the file into Premiere Pro CS5 (5.0.3) running on Macintosh OS 10.6.6.

  The problem is that I am just guessing on how to import sequences, and the result is I'm getting artifacts of movement and generally lower quality.  I use iMovie 11 my basis for comparison.   Not surprisingly, iMovie 11 imports since iPhone beautifully, but when I looked around, inside the properties, there is not much to see.

  Go using Apple built in quicktime 'Inspector', it is possible to see this video of iPhone4 a result of properties:

  file ".mov".

  Dimensions: 1280 x 720

  codecs: H.264, AAC

  Color profile: HD (1-1-1)

  Audio channels: 1

  Total bit rate: 10 543

  AGENCY - PREDEFINED DESCRIPTION:

  < my comments sharp brackets >

  ????  = Question

  General

  Editing mode: DSLR < Correct?   Best I could do, perhaps it should be "Mobile Device" maybe it's okay >

  Time Base: 29.97 FPS

  Video settings

  Image size: 1280 h 720v (1.0000) < of "Inspector" apple quicktime window >

  Frame rate: 29.97 FPS < of "Inspector" apple quicktime window >

  Format of the pixels:?

  Fields: N?

  Audio settings

  Sampling frequency:?

  Default sequence

  Total of the video tracks: 3

  Master the track type: stereo

  Mono tracks: 0

  Stereo tracks: 3

  5.1 titles: 0

  SUBMIX mono tracks: 0

  SUBMIX stereo tracks: 0

  5.1 submix tracks: 0

  Tips for the smooth search and * lossless * import/ingest footage in PPro CS5 iphone4.  (I'm not worried about the export for iPhone screen, concerning most of the information that I can find).

  Thanks in advance, Michael

  Tips for the smooth search and * lossless * import/ingest footage in PPro CS5 iphone4.

  You import it. that's all. First will (or should) use the file in native mode, so no need to do anything out of the ordinary.

  To create a sequence for it, simply one of the clips slide the button new item at the bottom of the project Panel. a new sequence will be created that matches the sequence. Edit now...

• No option for the email address for the import

  I import the list of 'people' to outlook.com in a csv file. When I get the choice to realign the fields of address book to import data record, there is no option for 'email address' in the record to bind to data. Everything what is important is the name and surname of the person (which I chose) but I want their email also. Have I missed something or if the e-mail option has been deleted for some reason any?

  OK, I created a file OutlookContacts.csv in my Hotmail account and haven't tried to import as usual and found, like you, there is no e-mail address in the "Record of import data" column. So, I open the csv file in a csv Editor (CSVed) and found that the e-mail address is in the column 48 of 56 column file. I deleted all the unnecessary columns to make a file of 16 columns. According to realign the records from top to bottom and checking the boxes for the areas concerned, the new csv file imported perfectly.

  I guess that TB has a limit on the number of columns that are read during the import.

• Narrowing of the search criteria for the import of images

  So I've been taking pictures and upload them to my computer to work on a daily basis, but it takes much more time that I feel that does take to get my phone for photos. He will say that it is almost finished, but then check each tiny file for another 5 minutes. Is there a way to make the importer search is not all the files? Literally, he finds all the images that I have in about 30 seconds, but takes more than 5 minutes to complete her research.

  Yes, it should be possible. Do not use the method of the "photo search" - go to "Computer" and open the memory card the device (internal or external, if necessary) - there should be a DCIM folder - open and copy and paste pictures of the day to your pc. When you are convinced that they have all copied correctly you can delete from the phone to the same point, but it's wise to copy instead of cut and paste... just in case! Cheers, Ric.

• How to reset the default values for the import of images

  With the help of Windows 8. file import settings have been changed for a tag, which was a mistake.  I can't change the import settings because the import happens too fast for me to get click on that link the import settings.  Is there a way to reset the default values to their original settings, so I can get things organized again?

  If it isn't a recent phenomenon then try to fix things via the system restore.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (7 or 8).
  http://support.Microsoft.com/kb/936212/#appliesTo

  See, control Panel\All Control Panel Items\Recovery\ Open System Restore

  Change the settings for importing pictures and videos
  http://Windows.Microsoft.com/en-AU/Windows7/change-settings-for-importing-pictures-and-videos

  See control Panel\All Control Panel Items\AutoPlay, maybe you can click on 'Reset all default settings'?

• Size for the imported table descrepancy

  Version: 11.2
  OS: RHEL 5.6
  
  I imported a large table with (450 columns). I'm a little confused about the size of this table
  

  Import: Release 11.2.0.1.0 - Production on Wed Aug 1 14:08:42 2012
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
  ;;;
  Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  Master table "SYS"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
  Starting "SYS"."SYS_IMPORT_FULL_01":  userid="/******** AS SYSDBA" DIRECTORY=dpump2 DUMPFILE=sku_dtl_%U.dmp LOGFILE=impdp_TST.log REMAP_SCHEMA=WMTRX:testusr REMAP_TABLESPACE=WMTRX_TS:TESTUSR_DATA1 PARALLEL=4
  Processing object type TABLE_EXPORT/TABLE/TABLE
  Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
  . . imported "TESTUSR"."SKU_DTL"                         7.311 GB 9502189 rows         <-------------------------------------------
  Processing object type TABLE_EXPORT/TABLE/GRANT/OWNER_GRANT/OBJECT_GRANT
  Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
  Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
  .
  .

  Although it is said 7,311 gb when importing, which is not reflected in DBA_SEGMENTS
  
  

  SQL> select sum(bytes/1024/1024/1024) from dba_segments where owner = 'TESTUSR' AND SEGMENT_NAME = 'SKU_DTL' AND SEGMENT_TYPE = 'TABLE';
  
  SUM(BYTES/1024/1024/1024)
  -------------------------
                 2.28027344
  
  
  -- Verifying the row count shown in the import log
  
  SQL> SELECT COUNT(*) FROM TESTUSR.SKU_DTL;
  
    COUNT(*)
  ----------
     9502189

  Why is there a difference of 5 GB?
  
  -Info on indexes created for this table (if this info is of no use)
  The total combined size of index into this array is 12 GB (hope the query below is correct)
  

  SQL> select sum (bytes/1024/1024) from dba_segments
  where segment_name in
  (
  select index_name from dba_indexes
  where owner = 'TESTUSR' and table_name = 'SKU_DTL'
  ) and segment_type = 'INDEX'  2    3    4    5    6  ;
  
  SUM(BYTES/1024/1024)
  --------------------
              12670.75

  The size is reported in the dump file is the amount of space the data took in the dumpfile. This does not necessarily mean that it is how much space it will discuss when they are imported.

  One reason for this is that if the tablespace in that it is written is compressed or not. If the target tablespace is compressed, then once the import is complete, it will be much smaller than what has been written for the dumpfile.

  I hope this helps.

  Dean

• Shares advanced for the slides of ramifications

  Hi all

  I spent hours on it, seen all Lieve and Adobe materials and all what I've accomplished is a headache and about 50 actions and variables in the trash can. Any help would be appreciated... a lot!

  I use CP 5.5 on a PC.

  Location:

  I have a training scenario where the learner is delivered in an entry slide (slide 1 for simplicity). On this slide, there are four photos of managers to talk with. A clickbox on each photo sends you a new slide. (ie: Manager 1 (M1) sends you to slide 2 (S2), M2 = S3, etc.). Once you see the Manager info click on a "back" button and are sent back to slide 1, so you can visit all four managers. Once completed, the learner selects a button continue and jumps to slide 6 in continue the scenario.

  Objective:

  1. when the learner chooses a Director and goes to the Manager page, on their return to the slide of entry, I would like to see a green check mark of their photo.

  2. I want the button 'continue' hidden until all the Manager of four pages were examined.

  Sounds simple? So I thought.

  One last question:

  You can attach shares advanced to a slide and a clickbox. Who has priority? Will be used rather than the other.

  I always find a lot of information on this forum, so thanks in advance for your ideas.

  Keep smiling!

  Mike

  Funny you should post this question because that's EXACTLY what I had to do for a client of mine, a month or two back, except that in his case, it was 6 different roles involved in a business process.

  I had a picture of each role on the master slide with a widget event handler attached to each, but a click box would have done the job just as well.  By clicking on the picture performed a tip Action to move to the slide in which you said all about how this role participated in the process of the company.

  I created a separate variable for each called [RoleName] role done with the default value of 0 and a tip for each called whole [RoleName] role Action performed.  Then I put the OnExit from each role information slide action to perform this action.

  Here's what looked like a typical action:

  

  As you can see, when the learner is out the slide of role information, and he performs this action, it assigns to the variable ManagementSponsorDone 1, and then jump to the slide Menu roles (the slide with pictures of role).

  When the arriives user to the menu slide it works a conditional Advanced Action OnSlideEnter called ShowTicks that looks like the value of the variable of each role to see whether or not it has been set to 1 and if so, reveals the tick sitting on the photo of this role.

  Here is what looks like the menu slide. Each scale has an element name that indicates what role it applies to (ManagerTick, etc.):

  

  And the conditional action of ShowTicks looks like:

  

  Note here the arrow that shows how the conditional action is made a condition for each role.

  What is the kind of thing you're looking for?

• Why LR (final) 3.4 shows "!" for the imported pictures?

  I imported photos from a memory card in LR (final) 3.4. When I am gone in the develop Module the exclamation point for "update of the process underway (2010)" was displayed outside these photos. Why is this? The photos have been imported by LR 3.4 (final); If the current process should not be applied to the import? Or it was applied and the notification of exclamation point is a bit buggy?

  WW

  Maybe your import set specifiies using the older method?

• Wrong width for the imported graphics to frame 9

  Anyone else had problems with Framemaker detecting the wrong width when you import graphics?  For example, when I import a jpg of a button which must be 21 x 21 pixels, Framemaker displays the 24 PX width and height than 21px.  This translates into a broken graph.  If I adjust the dimensions of the chart in FrameMaker for the right size, then print the PDF, the right border of the image is disabled.

  I tried to capture the graph a variety of different ways, and I still feel the same results.  I can import the graphic into Captivate or Word and the sizing is correct.  Any ideas?  Thank you!

  I use FrameMaker version 9.0p237 as part of the Technical Communication Suite 2.

  I just tested this with a sample file dimensions 21 x 21, and you are perfectly right. FM9 live upwards the size (and default dpi resolution) for PNG and GIF files. I also tried BMP and TIF equivalents and they were ok. FM8 does not have this problem, it seems that Adobe has played with filters PNG and GIF a little (maybe to get rid of all the extra colors coming).

  For an import JPG or PNG to a 21 x 21 to 96 DPI, FM9 seems to think it is 24 x 21-110dpi. FM8 is good.

  For a GIF of the same import, FM9 think it's 22 x 21-75dpi. FM8 had right.

  Also, what is strange, is that if the dimensions are both even, for example 20 x 20 to 96 DPI, then FM9 gets it right of JPG, PNG and GIF. However, if the * first * dimension is odd, for example 21 x 20 it he gets hurt again as before, but if the second dimesion is odd, for example 20 x 21, it just gets it. VERY STRANGE!

  This is certainly a BUG.

  I suggest that you should use BMP or TIF for now OR try increasing your 1-pixel icons to make them the same size, for example 22 x 22.

  I also recommend that you do not use JPG for the latter, but the GIF or PNG, because you can produce unwanted artifacts in the JPG because of used lossy compression.

  

• Is there a way to test for the first call of a function?

  Hello
  
  I created a function (using other functions I created) to generate a dynamic hierarchy tree menu based on parentID and itemID etc etc - I'm sure you are familiar with this concept. It works very well, and there is no problem.
  
  However, I do all this build in a string, and then dumped on the page. Again, this works very well. However, because the function is called recursively, my class, the class = 'tree' repeat itself in each occurrence of the opening UL tag.
  
  I want to only this class to be applied to the first UL, but because it is recursive, I don't know how to detect if the function is called for the first time or 5th time, etc.. I mean something like:
  
  < cfif myFunction is called the first time >
  Add the class
  < cfelse >
  do not add the class
  < / cfif >
  
  Please see my attached code. It is fully functional. Please don't worry that all the other functions do etc, they work very well, but I need a way or a variable to test against.
  
  Any ideas?
  
  Thank you very much
  Michael.

  Kapitaine wrote:
  > Hmmm, I bet that the solution is simple, but my mind is frazzled! Haha.
  >

  Yes, it's simple, you test the Boolean value and it will be true if it is
  set to true for a recursion.

  
  
  

  
  
  

  
  

  #somethingStupid(5,true) #.

• for the Asian Dynastys (AOE3 Expansion) function keys

  original title: game fan

  IM playing the Asian Dynastys (AOE3 Expansion)

  Im trying to use hoteys for the game. But I don't know some of them (hotkeys) and I do not know how to use them.

  I want to know where I can ask for it or help it. Can U give me an address to search for. Thank you

  Hello

  Maybe this helps:

  http://ageofempires3.FileFront.com/info/hotkeys

• After the last update 9.0.1 all symbols of Web site for the site in my favorites have disappeared... How to make a comeback?

  When looking for a Web site in bookmarks using 10.6.8 on Mac Book Pro OS all the symbols for the website have been removed and requires much more time locate the bookmark. What can be done to restore or reactivate the symbol?

  https://support.Mozilla.org/en-us/questions/910682

  Thank you

• For the Fn in Vista Buttons toolbar disappeared...

  Hello...

  I would like to ask how to again activate the toolbar (above in the monitor) for the Fn keys in Vista...
  Is the toolbar that appear when the mouse is moved upward on the screen and you can activate the wireless and all that...
  It's like the camera toolbar...

  I have a satellite U300-154 with Vista Home Premium.

  Thank you

  I think that PVAT installs the toolbar Flash cards.

  Uninstall PVAT, then download and install the latest PVAT (Toshiba Value added Package) on the Toshiba Europe site.

  The latest version is 1.1.7 on my laptop, I'm not sure the U300