AF:table pagination page numbering disappears

Similar Questions

• Page numbers disappear in final pdf of * place * InDesign pages

  Hello

  Due to restrictions of export to the booklet, I imposed an indesign document by placing each page InDesign document to another (the publication is 8.5 x 11 landscape - the script provided in will not impose it). I then export the Indesign file secondary in pdf format so that I can send it to a digital printing, copier however, does not print page numbers. All other elements of master page print, except for page numbers.

  Someone has a cure for this? (off collecting two InDesign documents and shipping).

  Thank you.

  Mindy

  What do you mean by "the script provided in will not impose it? This script?

  If you export the original file to PDF, then place instead of the pages of the ID, page numbers should work.

• Whence go and how to recover my page numbers?

  1. new Adobe Indesign CS4 (.indd file) document created from old file .p65 to Pagemaker.  Had page numbers at this time.

  2 moved some text around and changed the Table of contents (which was part of the text of the .indd, not generated by Indesign file) to reflect the changes in the text. Was still, at this time, page numbers.

  3 went to do a PrintBooklet and export to a .pdf file so that I could print from Adobe Acrobat.  Does not check for page numbers.

  4 has started to print and realized the page numbers disappeared - not only that they were not in the .pdf file, they were gone from the .indd file.

  5 see two dredged upward by a Google web pages.  Also had sent Indesign CS3 for Dummies.

  6. all sources are unanimous that I should have access the pages of Master Document - there is a single right-hand page on which the document starts and then double-spread pages accordingly - and use the text tool to draw an image on one side of the two-page master, then make a Page number current/marker/special character Type/Insert.  Repeat on the other side. And see if you now have the numbering of the pages in the actual pages of the text.

  7. I did a panel of window/Pages/Pages, drew my first image on the page master double page, then tried the Type/insert a special character.  It did not show a letter as they had said.  Similarly, on the other side.

  8 not only that, but it marked my frames like mistakes at the bottom left of the screen, the call then the "overset text" and was not happy until I removed them.

  9. as a final indignity, I couldn't understand how to check actually document pages themselves, as whenever I did a "go to Page" he registered only the Master Document as a possibility.

  10. what I am doing wrong, in chronological order?

  Executives were not big enough to contain page numbers, where the condition in excess.

  You could have simply expanded them until the page numbers are visible.

  The page break displays only the masters if you are a teacher or pages live when you are there. If you had just typed a 1 you would have gone to page 1.

  I would recommend a good book. Sandee Cohen Visual QuickStart Guide is the best book for beginners. Here is the version CS4: http://amzn.to/asUos8

  Best $23 you will ever spend.

  Bob

• Page numbering and the Table of contents

  I have a book containing 23 document files. Document files contain the page numbers in the footer.

  One of the document file is a generated table of contents (TOC). Unfortunately, the generated page

  the number in the table of contents do not match the numbering of the pages in the files. Here are the details:

  • The title page, in a file by itself, is not numbered
  • The frontmatter, distributed in five cases use lowercase Roman (i - xvi)
  • The body of the text in the remaining 17 files is digital (1-243)
  • The generated TOC uses cardinal numbers of the book as a whole. For example,.
    Chapter I is numbered correctly in the footer from page 1. However, he is listed in the table of contents
    as starting on page 19, because this is the file real 19th in the book. I put the document numbering
    This file from 1 properties and properties of Page numbering for the book as a whole to
    be "continue."
  • The style of the table of contents entries is correct. In other words, the frontmatter uses a tiny Roman and the
    chapters use Numeric

  I tried to regenerate the table of contents, but this did not help.

  Does anyone have suggestions on what is the way prescribed to do?

  OK, I continued to read and this is what I found:

  Set the numbering style in the document, and not in the book that we told you. Format > Document > numbering. Choose Arabic or digital. Repeat for the various chapters.

  

  Save and close the chapters. In the book file, click with the right button on each chapter and choose Configure XXX. This is where tell you the book to continue the page numbering or restart at the 1.

  

  Once this is done, update your address. From there, if there are issues, we rely on the logic of the Fm we use every day, and each of us can help you solve.

• Table of contents separate chapters page numbers.

  I am trying to understand the lay-out of national geographic for purposes of personal training. When I try to separate the page numbers of the chapters the in the table of contents, the text does ' t align correctly. I tried almost all tab combinations in all possible ways, but it does not work. Could someone help me?

  I want to lay out the following in the table of contents:

  Page number - chapter

  1 Omega chapter of

  the Galaxy

  Seaweed in Chapter 12 of the

  Netherlands

  Is it also possible to make an entry in the table of contents? As:

  1 Chapter 1

  The Galaxy Omega

  12 chapter two

  Seaweed in the Netherlands

  

  

  

  You must configure left intent intent and front-line negative in your paragraph style.

  

• How to upgrade only the page numbers from a table of contents in Indesign CS6?

  Hello!

  Help, please! I make a medical book with more then 1300 pages and about 40 different table of contents.

  I want to update only the page numbers on all the table of contents. But I don't see the option to update the table of contents.

  I've seen on other forums that it is a very old and familiar problem. Do you have Adobe already fixed it?

  Nothing has changed with the function table of contents. If you update a table of contents using the standard method of the table of contents, the complete table of contents are updated.

  You can get the page numbers only updates manually by creating your table of contents by using cross-references.

• Chapter numbers will appear in the table of contents with page numbers...

  First of all, thank you all so much for the display of the answers.  This forum is wonderful.

  I have a doc that needs to have chapter numbers appear with the page numbers in the table of contents.

  I insert the < $chapnum > and < $currentpagenum > in the footer and I get 1-1 appears.

  To include 1-1 in the table of contents, do I have to edit the referring Page, or is there another way.

  Thank you very much for your help!

  Change the reference to the table of contents page to use the building block as well as the first page, which is <$chapnum>chapnum.<$pagenum>

• Table of contents, separating the positions and Page numbers

  Hello

  I work with a table of contents in InDesign CC. Some of the titles that appear in the table will be very long and the next line. I want to wrap up before it hits the right hanging tab so that there is a visual separation between the page numbers and text. I understand that I can do it manually, but I want to do it consistently because it is a model for a large number of documents.

  Here's what I want it to look, the important thing is that the long position:

  1. regular position... 5

  1.1 regular subheading... 6

  2. long title that I hope

  a smart person would reduce

  down anyway............................................................ 8

  As opposed to:

  1.      Regular Heading...................................................... 5

  1.1 regular subheading... 6

  2. long title this person smart hopefullya would be

  cut down anyway..................................................... 8

  Any ideas? Is it possible to have an active table of content in a table? Or maybe something else? Expand on a second column?

  Well, looks like you know how to a negative indent on the left margin; you know, apply a few dash to the left margin, then some Indent first line. Look carefully at your dash controls in your toolbar: apply some indent right margin, then a few negative withdrawal of last line, and you can get your table of contents behaves exactly as you wish.

  I can take a few screenshots for you later if my description is not obvious.

• Disappearance of the Page numbers

  I use win 7 pro CS5.5.

  I created a "page number" style He has worked in the original document, the first of several papers "book". The page number is placed on a master page. Pages with this master page work very well.

  The second reserved document also derives its master page of the master in the first document. Page numbers appear fine. (FWIW, this second doc really is the last in the book).

  The third document is created and placed between the first and the second. He also has a master page based on the original. There is a difference, however. The bottom margin is nec. 5 "instead of. 6667 ". This nessecitated my move the page numbers at the bottom. It is where begins the strangeness.

  When moved to the bottom, the disappearance and their text boxes show a sign of infinity. When I try to move the edges of the text box, the page number and his rule finally appear in the middle of the page. I resize the text around the rule and the number box to do as I want. I then select the text box and try to move it into place. As I move it, the text moves, but the text inside strives to keep in the same place, as if it's in here. It happens to a certain extent I have move the text box to the left. If I move just a little more to the past of the left, right where I really want, the text appears again on the opposite side of the box all the way out of the page.

  The justification is set for 'far spine'. I do not understand why the text attempts to move towards the spine until almost at the right place and then jumps all the way out of the back page.

  Anyone can offer any guidance?

  JAL3:

  you say there is no other executives, but your second screenshot shows an element Master frame is the exact position as your frame number in the first shot. Looks like the empty main point is originally the text wrapping.

• Table of contents: not positioned wrong page numbers

  When I create my "list of Figures" (A Table of contents item type) I get ugly results such as (p83 and p84):

  

  and (p105)

  

  There is not always a dashed line and page numbers are not always end on the right. Is there a way I can influence it?

  I found a solution, less elegant, but it seemed to work in my little test. Add a GREP style to your paragraph to add a character without pause style tab and the number. (This corrects the independent left-aligned numbers).

  

  Then do a search and repalce to add a space before the tabs. The result is far from ideal, because it leaves a space between the text and the leader, but it seems to solve the problems of end of line too tight.

• You can create a table of contents with page numbers using bookmarks?

  You can create a table of contents with page numbers using bookmarks?

  Sometimes a long article has bookmarks to help navigate, it but has no real TOC (table of contents) on the first page. In such a situation, I think that it would facilitate the reading of the paper version if you can somehow create a table of contents with page based on hierarchical bookmarks in the document numbers.

  If this is not possible from Acrobat, is there a third party app?

  Indeed you have created a script for this - sorry that I missed it. I should have...

  Acrobat - Create TOC bookmarks

• Has anyone who has worked with doc us MIL - STD and generated with the success of the page numbers in the table of contents?

  I'm creating a template using FrameMaker 7.2.

  MIL - STD dictates works package (such as chapters) page numbers in the format: 0001-1, 2-0001, 0002-1 and 2-0002, etc.

  The problem I encounter draws in this format of the page number in the table of contents generated.

  I used a variable on the Master Page, and generate page numbers in each package to work properly.

  I know that in point 7.2 of the FM, you cannot include a variable in a table of contents generated.

  So I tried changing the variable on the Master Page to text using a paragraph tag (WPnumber), but have not gotten it either works.

  Tried all the other stuff I could think of, too.

  In my view, a part of the problem is that FM cannot have leading zeros when you set the page number or chapter (understandable 99.9% of the time).

  If anyone has suggestions or solutions, I am very interested to hear.

  Thank you.

  1Editor - and puzzled

  I already manually put the zeros.

  I just want to be clear that strikes the zeros directly on the master page does NOT have to include in the table of contents. You then type in the context of the reference to the table of contents also. In addition, you must have separate template and reference pages for chapters 10, 11, etc., in order to obtain the number of zeros correctly.

  With my method, the zeros are introduced as part of the chapternumber itself, in the chapter number of the TEXT. You still have to type but only once for each file.

• Table of contents page numbering problem

  I do turn a problem in which the Table of contents, newly created or updated to date, is not its own pages, causing all the page numbers next to be turned off by the number of pages in the table of contents itself.

  What I am doing wrong?

  I never heard of something like that happening.

  The only thing I can think of is with Smart Text Reflow option preferences?

  Using CS4?

  Are you up to the latest patch (help > updates)

• Right align page numbers which is found to the left of the table of contents entries

  I posted a similar question a while ago I think that substances or Peter replied, but darn if I can find the thread. At that time, they provided a script that does a GREP search, find a sentence that starts with a number and its replacement by a tab. I still have the script, but for some reason, it does not properly with my new table of contents page layout. It must insert a tab on the left page number (page numbers are to the left table of contents entries) and force the numbers right aligned so that a single-digit right page number aligns with the right edge of a two-digit page number.

  Find: ^ (\d+)
  Change to the: \t$1

  What is happening in the new table of contents, this is the script is a figure and inserts a tab to the left of the page number. Page numbers are moving to the right, but they do not align right. They are further to the right, but they themselves numbers correspond to the left.

  I'm puzzled as to why the script does not work on this new layout. Now I use CS4 and it still works on the former route. Nothing terribly different about the new layout except that the column is much closer, and there are several columns threaded in the TOC instead of a long column and the chapter titles do not have page numbers (but all other entries have page numbers.)

  We should probably set the tabulator in your paragraph style: a tab aligned right for the numbers, followed by a tab stop that is aligned to the left to the text that follows this number. (I guess that there is a tab after the number.)

  Peter

• Dynamic table of contents page numbers

  I'm in InDesign CS5, and I wonder if there is a simple way to just insert the numbers of dynamic pages that refer to somewhere in my paper. I don't think I want to go into the creation of automated TOC, only the page numbers.

  Also - how can I change my email address on the forums of these notifications are in the right place? I can't find a way to change this.

  You can use cross-references instead.