After account reset white screen again

Similar Questions

• The touch screen does not work after a reset.

  Original title: lost after factory reset touch screen

  I bought an acer aspire z1801 on the secondary market, the former owner has done a factory reset to delete personal data, but now there is no touch screen. If I look in the windows 7 Home premium, there is not a program for pen and touch, I learn that something happened when restarting a part of windows is missing? If I can add this section or I have to re install a new windows 7 on my computer, if I have to pay for the program I could go directly to the upgrade of windows 8 and that would be the missing piece?

  Thank you

  Hello

  Welcome to the Microsoft community.

  I see that contact drivers are missing on your computer.

  You can check this link to order tp download and install the drivers:

  http://support.Acer.com/us/en/product/default.aspx?modelId=3796

  Alternatively, you can contact Acer for assistance with the issue of touch, because the question has started to occur after performing a factory reset.

  Here is an article which described on 'Upgrade to Windows 8'.

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  I hope this helps.

  If you need help with Windows let us know.

• White screen on Equium P200

  Hi all!
  yesterday morning I started my computer, after 5 min, I close the lid, and I'm going to work.
  When I'm back back I opened the lid and I get a white screen.
  Well, I think is right for the moment. I restarted but white screen again.
  I restarted many times but nothing. I heard the noise of vista hard drive to work, but I don't get nothing on the screen. I'm trying to connect an external monitor but nothing.
  Anyone have this problem? I Don t has an idea of what I can do to recover the normal screen of you.
  If I use reinstall drive I lose all my data and I don't want to. Can someone help me with a few great ideea what can I do?
  Thank you much in advance.

  A white screen usually means that the backlight is on but no signal reaches the graphics card on the screen. This could have many reasons such as:

  -a broken screen cable
  -graphics card failure
  -view controller malfunction
  -some short circuit between the graphics card and the screen

  In your situtaion I use warranty (if still present), sending the machine to the [the closest available service provider | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871] and have them check the hardware on some failures...

  That's all I can tell you from my experience with white screens...

  Welcome them

• Satellite Pro M40 sometimes starts with white screen

  Hello!

  I'm pulling out my hair with this problem.

  For no definable reason that according to me, my laptop will start with a blank screen.
  Not all the time, but, seemlingly, whenever it feels like I need extra help stress on my plate.
  For the most part, with perseverance (starting with or without battery, with or without the adapter, with or without pci with or without mouse usb network card and any combination of these elements), it ends by lights correctly, but sometimes Nothing that I won't get it to start and show me a screen.

  My M40 is 4 months old.
  Since it's purchase sent to Toshiba for repair twice for this problem, when I have exhausted myself trying to coax it into life. Whenever he was sent by saying either the problem has been fixed, or that he had no problem found/all systems ok / "it works very well for us, after testing all week."

  This week [edit: it was Wednesday], I sent it to me, and Yes, I checked the trunk upwards and gave a sigh of relief that there is an image on the screen.
  I wrote a letter to this topic a day or two later (that day he first gave me a screen white, but on closing down and restart, it was fine).
  Today, however, not a week later, I have a white screen again.

  I am reluctant to send for repair again, due to the stress involved and the time it takes and the technicians speaking it works for them.

  If anyone can help, or was faced with a similar problem, please respond.

  Oh, and the solution does not lie with the keys FN + F5, because I tried several times... unless there is a way to 'special' to build on them, I'm not in the running for!

  [Edit]: several hours later, as a demonstration of her bored this problem is, my screen is once more working.

  I went on once again, at the time and no joy. Then, after switching OFF, count to ten and the restart, eureka.

  I'll update with news as it happens. If there are all the necessary specific details about "switching on the environment", just let me know.

  Post edited by: jazziefox

  Hello

  Thank you for your update.
  It's a very strange question, and it would be very helpful if you can put yourself more observational.

• Smartphones from blackBerry 7100 G white screen and I have to remove the battery, reinstall it.

  I'll be in the middle of typing, and then the screen turns white!. I have to take the battery out, put again and then I can get 5 more uses out of it and it white screens again. Sometimes I just need to make works with the black button on the top and it starts working again. What is the problem with my Blackberry? My company does not allow me to replace it because they are cheap. Any suggestions in addition to finding a new job? Boring it is slightly

  I found and installed the last o/s. MY Blackberrry still "white screens" randomly and I need either press the black button on the top several times or remove the battery and reset back to normal. New to the forum and made a typo

• White screen when I turn on the Satellite M50

  I have intermittently just get a white screen when I turn on the computer. Usually, the problem is solved by turning off the computer and try again - but sometimes I get a white screen again.

  It seems to be linked to the use of external devices - can someone give me clear instructions on which expected/doesn't have to be connected when I start and shut down the computer? Or other suggested solutions?

  Thank you

  Hi Rachel

  Believe me; It's not easy to provide an exact solution and that's why we need to study a little ;)

  Have you checked if the graphics card driver update could solve the white screen issue?
  If not, try to download and install the latest graphics driver

  You second question on the laptop stop problems is known to me. Sometimes it happens on my laptop too. The LTCC is a part of the Norton antivirus application, which is still running in the background of the operating system.
  This strange box "close the program" might appear because this context process couldn t be closed automatically and so the operating system can not stop.

  Especially the new application installation might help you. But why don't you use Norton Antivirus? What makes the laptop very slow. I have used this app for a long time but now I use the freeware program called Antivir. Its free and in my opinion much better than the Norton Antivirus.

• BlackBerry smartphones "BOLD" white screen please help

  Hello everyone hope that someone will want to help with my problem. You see, I threw the phone on the floor the other day and showed a white screen, sometimes fainting in the normal display and sometimes what is the colorful stripes. spend 2 days and then my screen was just full of stripes of color, no white screen at all. I did some research and found that the concealment of the screen and reconnect the Ribbon of the screen might work. I did and he just came back to the white screen, no more color just scratches the white screen again. I watched tape of connection and its not teared, so don't know what else to do to fix. There was this other thing that coulded works but does not, and it was just the lock screen and pressing on the lower right of the screen by pressing the button 'p '. which didn't work either so if anyone can help, I'd appreciate it.

  Hello Rafarafa

  Welcome to http://supportforums.blackberry.com

  A friend has even trying to do what you do your screen is damaged

  Your screen is in disrepair and damaged.
  It is best that you take it to a specialized, reliable and guaranteed technical service.
  And comentale what happened.

  Remember that each screen has a unique code that works with your BB.

  Kind regards.

  • Answer you like me? You want to THANK? Click
  • If it was the SOLUTION click on "accept as Solution!

  #4LL   #ichooseBlackBerry10 @Gutijose14

• Adobe CC blank white screen!

  Adobe Creative cloud always shows me blank white screen and I used adobe cc cleaner to clean everything and re-installed adobe creative cloud over and over again, it shows me a blank white screen again. I've also renamed opm.db to opm_old.db and still the same problem. can someone help me on this? Thank you

  

  Well, I had a discussion with adobe support and one of the adobe help system took control of my screen and it has removed several files of different path in my windows and reinstalled adobe application manager and then updated for adobe cc and then my cc adobe screen came back. Well, basically the only option for those who face this problem is to share their screen with the wizard and let them help you on this. great adobe support.

• Replacement Palm TX has problems white screen even after hard reset

  I hope someone can help me find a solution.

  I've been a happy user of Palm OS since the early days of Palm III.  After a Palm III and V, had a Sony Clié which lasted a long time, but finally fact poop, went to a Z22 and broken screen, then almost but not quite a year ago (in warranty, so-called), bought a Palm TX.  Worked great for a while but ends with a unit I could not turn on or off because the switch was dead.  Worked around to keep the sync cord and power on by pressing the button and then cancelling.  Finally he sent for repair under warranty.  Return a unit back to me.

  It worked well for almost a month, then it started (with no new software or usage patterns) to have white screen problems.  To resolve this problem, I tried a lot of things.  Soft reset, reset hard, leaving completely take its battery for weeks at a time.  Nothing works; It continues to go on me.  In addition, the sound is strange and garish when it beeps (for example accept zone after reset).  I bought the TX to the United States when I was home for a visit last July, but am currently living in the Netherlands.

  I contacted Palm repair center in the United Kingdom which has replaced my original unit; They said would pass on the word of my troubles of Palm and Palm should contact me, otherwise for them by e-mail.  They do not have.  I don't find an e-mail address to explain all this to anyone with any power to help me.  I tried to use the Palm website to solve this problem, but neither the original serial number or the serial number of the replacement unit I have now shows as eligible for warranty repair.  I tried calling the support number us Palm (http://kb.palm.com/wps/portal/kb/common/article/47005_en.html#howservice), but I get "call is temporarily unavailable."  When I click 'here' when asked 'If you want to query the status of the warranty of your handheld, or prefer to repair through our Technical Support Department, click here' (https://www.euroservice.palm.com/repair_entry/NLD/EE) I find myself on a page that simply says: "Please enter the Url of the Source."  I hesitate to provide information of credit card for a problem, if it can not be covered by the warranty (which I think it should be, since I'm still in the initial period of 12 months), can I give up.

  I am very frustrated trying to solve this problem.  I am disappointed with the support decreases for a PDA (which is not a phone) with Palm OS.  Since I am living (though not comfortably or well) without my calendar, address book, alarm, player, dbs, cookbook, checklist, etc., I am seriously considering to leave Palm OS.  My preference is to resolve this problem, and my idea nearly a year ago was to climb the Palm OS until it was completely gone (embedded in phones, anyway), but my problems have discouraged me to the point that I wonder if it is my end.

  Does anyone have a suggestion?

  Hello..  Not at all.   I suggest that because it was repaired in the United Kingdom, which indicates that it is a device of UK. Otherwise they would not be able to fix it it were an American feature.  Warrenties are the same, Yes, but on the marginal seas cannot be fixed across the country, they were designed for.  If it is a U.S. unit that UK should have refused to repair and referred you to US support.  Because it didn't happen I guess that's a device and if so you need to communicate with them. From the link that I sent you, on the left thumb to contact us, there are ways to communicate with them another email then. If it fails try another phone and I'm sure you can get this resolved.  If it is infact a device US contact our support pda to US @ 866-935-7256

  Message edited by Damien on 06/30/2009 08:24

• White screen on Toshiba virtual store - account 33090

  Hello

  I have created a personal account Toshiba today and after updating the app, I get white screen.

  Help, please... Personal account is 33090
  Thank you.

  Thank you for the request.
  Your virtual shop Toshiba 33090 account has been reset.

• WhatsApp works do not last night... When I opened the app, it shows white screen and closed after a certain time.

  WhatsApp works do not last night... When I opened the app, it shows white screen and closed after a certain time.

  Try to do these steps, it should help:

  1 check WhatsApp update: Open App Store from your iPhone, click on updates, check if the application needs to update.

  2. restart your iPhone: hold down the sleep/wake button to it turn off and then turn it on again.

  3. close the app: multitasking opened by double pressing the Home button, slide the nonresponse apps up to close.

  4. go in the settings, press Whatsapp, touch turn off everything except mobile and notofications data.

  5. return to the home screen and open whatsapp.

  6. go in the settings, press Whatsapp and turn back.

  7. open whatsapp again. It should work now.

• Reset ends in white screen, no job options

  I have a MacBook pro 15 inch, start 2011 with always OSX Lion .on that it installed.

  Never did really of the software updates, since a few days ago. It was clearly a mistake. An orange, I got first screen, then white and blue. And after another implementation, it is even more possible to connect.

  I tried all the options people suggest online mode (shift) course, mode(cmd+r), vram(cmd+opt+p+r), only mode(cmd-s) and internet recovery mode recovery. (cmd + opt + r).  I continue to ending on a white screen just after the Apple logo.

  -Safe mode = never got in front of a white screen;

  -recovery mode = never got in front of a white screen;

  VRAM-= think it worked because the sound of the chimes was stronger after;

  -Single mode = Can get all the time; but sometimes blue with white letters, then the next restart custom works for sure.

  -Recovery Internet = Ethernet cable and the world appears but only managed to reach the second screen once.

  opt + D (material check says that there is no problem with my hardware)

  I managed to reach the login screen a few times with lots of fsck - fy and restarts... But quickly dropped again after the login. At each time it failed, the Apple logo was a blue tint and I managed to reach the login, the logo was gray.

  Yesterday, I managed to reinstall OS x Lion with restoration of the Internet, the first time I got to the screen with the options.

  I worked very well with a bit of Internet and Excel. Then I wanted to reach the Java Control Panel in system preferences to check if the problem was Java. It crashed.

  Managed to connect one more time and I tried to update Java in the browser instead of system preferences. It crashed. HARD.

  After restarting, no option no longer works with the exception of the screen in single mode; but the screen is blue with white letters, so I don't know if I'm able to reach the login screen more.

  I already tried many things and I'm afraid, I only make worse it.

  I think the problem is the Java framework or the video graphics drivers. Rather the software associated with that material, but I don't know more.

  Someone knows what to do?

  make an appointment at the genius Bar to be sure that you have these questions:

  https://www.Apple.com/support/MacBookPro-videoissues/

  Your Mac MUST meet all THE requirements of the program to cover. It must be in the correct date range and must be able to run the diagnosis of VST and fail to be covered by the program.

  Mac that don't meet ALL the requirements (such as Macs who cannot run anything) is generally considered a random failure.

  They are not trying to squeeze every penny from you like car dealerships. Apple wants you to be a customer happy, if possible. The store manager can have additional flexibility to allow outdoor program repairs or provide repair cost if you don't finish eligible under the program.

• Start-up and white screen issue after updating to v10.11.5?

  I can't say 100% that my problems are related to the last update, but I thought I'd ask.

  I've updated about 4 or 5 days ago, and although the questions did not begin immediately, they start after the update. It should be noted that I have never had issues like this before.

  Here are some of my questions on my MacBook Pro (17 inch, early 2011), 2.2 GHz Intel Core i7, 8 GB at 1333 MHz DDR3, Intel HD 3000 512 MB graphics card

  1. the monitor will sometimes go haywire and a strange split, screen where the mouse can go to the left side of the screen and reappear on the right side of the screen, because the office is now split into two

  2. computer crashes and the monitor starts flashing to show a blue zigzag striped background

  3 freeze during startup and never restart computer. Occasionally, it will start very well, but the computer locks upwards at some point while using

  4 computer at boot flashing out to a white screen then restart never

  Thanks for any help.

  Now I'm starting to think my problems are related to a single user, sign in. Only 2 people use the computer and my connection seems to be fine. No crashes or anything like that.

  The problems start when my wife logs in to his user account.

  Thought I would mention it.

  Any help/response would be appreciated.

• Satellite M50 - white screen after login on Win 8.1

  Satellite M50 running 8.1 Win
  After login, download mouse white screen, but nothing else.
  Can run Explorer.exe manually via the the Task Manager for go, but some applications like Acrobat and Windows Mail does not work.

  I searched online and tried all sorts of fixes suggested without result.
  Any suggestions gratefully received!

  I don't know what the problem is here, but you can try to Win8 will stop completely and check the repair options. Try again with the system restore and roll back the OS a few days back. Maybe this will help.

  http://APS2.toshiba-tro.de/KB0/TSB2A03ES0000R01.htm

• I have a white screen after upgrade windows 8.1 on HP Pavilion e005sv 15.

  I have white screen, only the mouse pointer after work

  upgrade Windows 8.1 on HP Pavilion e005sv 15.

  Any help please.

  I have not tried the updated graphics drivers again as my client must use the laptop. I'll get to try this weekend. Thanks for your help