After changin CC Plan, I have this message "Lightroom mobile subscription expired.

Similar Questions

• My crashing after windows loading and I have this message - this device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Hello

  Have you tried to update the drivers as suggested by Basith M?
  
  Method 1:
  You can run the fix provided in the link and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/GP/hardware_device_problems

  
  Method 2:
  You can also try the procedure described in the link to troubleshoot driver issues.
  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
  
  See also the proposal contained in the link and check.
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/kb/932520/en-us

• Windows XP Pro on which I run several programs. After the opening of a few applications, I have this message "not enough memory".

  Hello

  I have a PC running Windows XP Pro on which I run several programs. After the opening of a few applications, I have this message "not enough memory".
  When I have this message, I can't open another application, or those in Windows... I have 2 GB of memory and only 700 MB are used.
  If I open the calculator several times (about 65 times), I have the same result.
  Sometimes, I get no error message, but the application does not open.

  Someone knows why?

  Thank you

  Hello

  You did the chnages on computer before this problem?

  I suggest you go through the steps of the following atrticle.

  "Not enough memory" error message appears when you have a large number of programs running.

  http://support.Microsoft.com/kb/126962

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
  How to back up and restore the registry in Windows.

• I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP.

  Original title: someone help please?

  Working on my old computer, a pentium 4, card mother GA81PE1000, I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP. After so many years, working on the construction of computer & repair, it's new to me.

  So I checked the Microsoft Website for answers from people with the same problem in the past and apply their suggestions, nothing works... hard drive replaced, the changed value in the bios, did everything possible, still nothing works, phenomenal for me, please help me find an answer, thank you?

  Hello

  1. have you made changes on the computer before this problem?
  2 - what you want to say that you receive this error message during the installation of Windows XP?

  Check to see if the following is useful.

  Method 1: Disconnect all devices non-essential connected to the computer and restart. Check to see if it boots normally.

  Method 2: You may need to check the settings of the BIOS (Basic Input\Output System). Check if the hard drive is detected. If this is not the case, check the physical connections. Refer to the manual to check the same.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  The following article might be useful: "Error loading operating system" Error Message When you restart your computer during installation

• connection to Santander Bank I have this message; This connection is Untrusted

  When I connect to Santander Bank I have this message; This connection is untrusted you asked Firefox to connect safely to retail.santander.co.uk, but we cannot confirm that your connection is secure.           Normally, when you try to connect safely, sites will present a reliable identification to prove that you're in the right place. However, this identity of sites cannot be verified.                                   What should I do if you normally connect to this site without problems, this error can mean that someone is trying to impersonate the identity of the site, and you should not continue.                                                                 Technical details retail.Santander.co.uk uses an invalid security certificate. The certificate has expired the 28052011 0059. The time now is 02062011 1815. Error code sec_error_expired_certificate I understand the risks I contacted the Bank, but they say there is not a problem and ignore it. They say that my security software is the problem! But I checked with McAfee, tested out and that's not the problem. What should I do? I don't have any experience of this problem in the past with the site. It happens to any browser that I use

  Your PC's date and time is incorrect.

  Right click on the clock in the system tray. Select adjust Date and time.

  Check and correct the month, day, year, hour, minutes and time zone.

  -steve

• Why I have this message? Error: the floppy drive seek failure

  Original title: why I have this message?

  floppy drive seek failure. I don't have a floppy drive on my cumputer.

  Hello

  This problem occurs if the following two conditions are met:

  The computer has no floppy drive.
  1. the floppy drive is enabled in the BIOS settings.
  2. for example, this problem may occur if the floppy drive is enabled in the BIOS settings by default.

  To resolve this issue, use the system setup program to disable the floppy drive in the computer BIOS. You can contact the manufacturer of your computer to help make these changes.

  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved.
  Changes to settings are at your own risk.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have this message on my desk: < root windows > \system32\hal.dll.

  original title: a little too technical for me this answer...

  I have this message on my desk:\system32\hal.dll.

  But according to the ansver on the support line, it is too technical for me, I put the CD rom and pressing the "F2" on the keyboard it lead me to a blue page with 3 columns, vertical on the left side with a menu to select with: System, readers, devices on board, video... so onon the system one I tried the boot sequence but get stock there.

  I don't know if I took the right track!

  Can anyone help please?

  WINDOWS COULD NOT FIND START BECAUSE THE FILE IS MISSING OR DAMAGED
  WINDOWS ROOT>\SYSTEM32\hal.dll

  This message is rather misleading.  It happens because the boot.ini file that tells where to look for 'Windows' boot is damaged, so it is looking for the files in the right place - hal.dll is be the first person he's looking for. Set the BIOS to boot CD before the hard drive.  Start the XP CD and at the installation site, take the immediate R for repair.  Assume that any requested password is empty.

  At the command prompt, type:

  H r s C:\boot.ini attrib [press Enter]
  DEL C:\boot.ini [press Enter] [to remove the bad]
  BootCfg /Rebuild [press Enter] [to search an installations of Windows, and make a new one]

  Remove the XP CD and hopefully restart Windows. MS - MVP - Elephant Boy computers - don't panic!

• whenever I try to use the windows fax and scan, I have this message:

  whenever I try to use windows fax and scan, I have this message: Windows fax and scan cannot access your documents folder. Please, make sure that windows fax and scan can access this folder. How I do that?

  Hi Mohamed

  Thanks for your posting in the Microsoft community

  You can check if you have my documents in C:\Users\ (username) \My documents correct location.
  If the problem persists, you can deactivate and then activate Windows Fax and consolidated expansion of print and Document services from the windows on or off check and option features if this solves the problem.

  You will need to disable the function, and then click OK. Now open Windows Fax and Scanand check. Yet once activate the Windows Fax and Scan and check if you experience the same problem.

  See the link below to display the window for the deactivation and activation windows fax and scan under Print and Document services and check option.
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  OR

  Just find a hidden file called 'fax' at c:\users\rich\Documents\. I have
  delete the file and create a directory named "Fax" to
  c:\users\rich\Documents\ with subfolders called "Drafts", "Inbox", and
  "Personal cover pages. You click Windows Fax and Scan

  It will work

• Lightroom Mobile has expired? I have an educational version of CC mastercollection.

  Lightroom Mobile has expired? I have an educational version of CC mastercollection.

  Hi mandy,.

  Please purchased mobile Lightroom not available to members of the teaching of Kivuto and ensure you / your organization haven't bought your subscription to Kivuto.

  Kind regards

  Assani

• I often have this message: "Explorer stopped".

  Original title: whay windows8 stop FAQ
   
  Salvation;
   
  Often, I get this message:
   
  The Explorer has stopped...
   
  Sometimes, it recovers automatically and some time I lose the page that
  It's very awkward. I never have this issue with XP!
   
  Thank you;
  Aladin
  Dear Abdul R.
   
  Thank you very much for your help.
   
  Until I received your message I remembered to what happened then that I was downloading RealPlayer; I noticed other things showed on my computer without my permission and when I took it to ad or remove apparently something was still there
  So. I went through the ad/remove again and I went on it by looking at the date, and I found an icon named Web... (something)? And it is not published by any known source so after I removed it;  Windows8 works very well.
  And I will follow your method for future use... .thanks
   
  I would like to note that I am not an expert, but I have a lot of patient.
   
  Thank you once again; I thought of do you know that similar thing happened more than once to my other laptop... It com with an automatic update of familiar source.
   
  Best regards;
  Aladdin Hassan

• Error code [0 x 80082202] I have this message telling me that my product key is counterfeit or something? Which is what this mean & what do I do about it?

  My computer seems to work very well, but on my desktop there is always a message in the lower right corner of the screen. never had a problem until about a week ago. Help, please!

  Hi kenogypsy,

  1. did you of recent changes on the computer?

  2 are you able to install Windows update on the computer?

  3. do you have security software installed on the computer?

  Usually, you would receive this message if your copy of Windows has failed validation.

  See the below Microsoft article and try the steps mentioned, check if it helps.

  Windows Genuine Advantage does not validate a copy of Windows XP

  http://support.Microsoft.com/kb/916247

• LR6: Message 'Lightroom mobile-Testversion ist abgelaufen' ausblenden

  Hallo zusammen

  Ich bin recently auf LR6 umgestiegen und jetzt immer die message links oben Green

  "Lightroom mobile-Testversion ist abgelaufen.

  DAS looks pretty unprofessionell. ICH möchte nicht den erwecken design, mit abgelaufenen Testversionen zu arbeiten.

  There are possibility sharp message auszublenden eine? Immerhin habe ich die are so und möchte nicht standig "Werbung" sehen as Dienste, ich nicht thankyou.

  Dress Dank und viele Grüße

  André

  Of the kannst das in den Optionen zur deaktivieren plate identity.

  http://lightroomguy.com/how-to-customize-the-Lightroom-identity-plate/

• I can't open my Quicken 2010 Deluxe. I have this message: "Quicken Launcher has stopped working" _

  I'm unable to open Quicken 2010.  I get the error message: "Quicken Launcher has stopped working".  Quicken support referred me to Microsoft.   Problem event name:

  Problem event name: APPCRASH
  Application name: qw.exe
  Application version: 19.1.9.16
  Application timestamp: 4bc912bd
  Fault Module name: kernel32.dll
  Fault Module Version: 6.0.6002.18005
  Timestamp of Module error: 49e037dd
  Exception code: c06d007e
  Exception offset: 0003fbae
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Additional information 1: aae1
  More information 2: 51e744827099497e8ec68af36f76ed20
  3 more information: dd26
  Additional information 4: 97813876ec55713af34858b0d2629624

  Only, I have solved this problem.  I spent two days dealing with less competent people in India of Intuit.  After giving up on them and waiting for a phone call that never came, I continued to read and began to isolate in my system to a bad installation of .net framework 2.  After several attempts to uninstall and reinstall .net framework, I was finally successful.  I need help to do that, and I used this link (http://blogs.msdn.com/b/astebner/archive/2008/03/07/8108332.aspx?PageIndex=3).   He took me to always to this figure, but I wasn't aware of the .net framework problem until Quicken 2010 wouldn't launch.  All is well now, just finished all my accounts balance.

• After downloading 4.0 I get this message: application JavaScript is unable to create the plugin object of mcafee: TypeError: components.classes['@ [cid] is undefined

  I finished to download Firefox for my Mac OS 4.o. X.
  When I try to open a Web site, I get the message:
  [JavaScript Application] cannot create the plugin object of mcafee: TypeError: components.classes['@ [cid] is undefined
  If I click on the OK button, the site opens, but without the alert McAfee at the bottom of the window.
  I had just downloaded 3.6.16 and got box suggesting version 4.0 download for better security, but that seems to be where the problem is!

  This indicates that an add-on that you use is not compatible, considering the other errors, maybe it's the McAfee add-in. To confirm that the module is originally, use the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

• I have the latest version of firefox (10.0.2) on Mac OS 10.7.3 but often I have this message: "your browser is obsolete. Recently, I noticed that google analytic to reference my visit on my own site in "stat browser" Firefox 3.5.5. Any suggestion?

  Also I use the latest version of firefox, I sometimes get the message that it is out of date. Google recognizes my browser as version 3.5.5

  Can you try to reset your useragent parameter? Instruction can be found here, see the statement of Helper7677 3rd

  • https://support.Mozilla.org/questions/760152