After cutting or copying a file JPEG as in XP, when stuck becomes a scrap.shs file?

Similar Questions

• PC keeps restarting after that I copied some files

  my pc keeps restarting after countless attempts trying to remove this file dvd that I copied from a dvd. When I tried to delete this file using a different account, the cycle just repeats.

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• When you try to copy a file 'trust' in Vista, get the message 'Copy as administrator'

  I have a computer with Windows Vista Home Premium (32 bit), in which I am an administrator on the computer. I have a file that is "safe" and requires administrator permission to open. Since I am an administrator, I was able to open the file. But when I tried to cut or copy the file, a message appears that I need administrator permissions to open it! Similarly, some programs that create other files (images, for example) must be open as follows so that you can actually save a picture: right click > run as administrator . If you do not open the program in this way, access is denied when you try to save a picture. But back to my account. Like programs, is it possible that I can 'copy as administrator' or 'cut as administrator'?

  I discovered how to copy and paste files using a single command line. Unfortunately, you can't copy the files, not folders. Here's how to copy a file:

  1. Open command prompt
  2. type "copy" without the "sign, while simple letters
  3. press the SPACEBAR once
  4 type the location of the file you want to copy (for example: C:\Users\default_user\file.txt)
  5. press the space bar once more
  6. type in the destination that you want to copy the file (for example: Folder\destination C:\New folder)
  7. press enter and your file should be copied.

• I just copy a file by ctrl + c then I'll stick with ctrl + v, that after I copy the file (b) by ctrl + c and paste ctrl + v and once again if I need to paste everything first: to leave what shortcut I use

  I just copy a file by ctrl + c then I'll stick with ctrl + v, that after I copy the file (b) by ctrl + c and paste ctrl + v and still, if I need to paste everything first: to leave what short cut I have we

  On Mon, 24 Sep 2012 15:49:08 + 0000, ajay8055 wrote:

  I just copy a file by ctrl + c then I'll stick with ctrl + v, that after I copy the file (b) by ctrl + c and paste ctrl + v and still, if I need to paste everything first: to leave what short cut I have we

  You can't do it without third-party software. Just go back and
  Copy the file (a).
  Ken Blake, Microsoft MVP

• Screen freezes and text operations hold after you select the text to cut or copy

  Recently, I met a problem with the processor.  When I highlight text to be cut or copied, the system crashes.  The image of the screen turns off so I can still see the text but cannot move the cursor or perform all functions.  After 30 to 60 seconds, it emerges, and I can start working again.

  Hi RickSmith,

  1. did you of recent changes on the computer?

  2. only the problem occurs only on the program word or even Notepad?

  3. When you copy the text too?

  4. What is the problem with processing?

  I suggest that you check if the problem also occurs when you use the notebook as well.

  Check if the problem persists in safe mode

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  If the problem does not persist in safe mode then I would suggest that you do clean the clean boot procedure and check.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After you change the raw file in CS6, jpeg looks dull and has weird tinge to it. I tried all color adjustments, but the result is the same throughout, jpegs of LR5 and 13 elements looks nice and consistent. How can I fix it?

  After you change the raw file in CS6, jpeg looks dull and has weird tinge to it. I tried all color adjustments, but the result is the same throughout, jpegs of LR5 and 13 elements looks nice and consistent. How can I fix it?

  Make sure the jpg has embedded sRGB profile.

  In what application you view jpg files?

  The symptoms you describe are typical of images with Adobe RGB or ProPhoto read in an application that does not support color management.

• Satellite U500 - refresh doesn't work after copying a file

  Hello

  I have a little problem with my Satellite U500.
  If I copy a file somewhere, he sometimes goes there, but sometimes when I copy the file lets say office, then the file is not visible there. I have to update every now and then to be able to see it there.

  Jaso444

  Hi Jaso444,

  What OS do you have exactly?
  It happens when you copy a file with Windows Explorer or another program?

  Sometimes I also noticed this problem but I think it s normal behavior. In this case, I press F5 (refresh) and everything is ok.

• The behavior of copy (.png files) screen when using TextEdit and printing

  I have long used the method to copy and paste texts and/or pictures to TextEdit and print files .rtf or .rtfd below:

  I use the command-control-shift-4 and the cursor to select things and paste into TextEdit.

  That stopped working in the Sierra.  I tried several methods (PDF format conversion, fall in Pages and Numbers, for example), but nothing worked: the Canon PIXMA MX922 printed on a white sheet and left the box of small characters with text "filter impossible."

  There is no new printer driver on the Canon site; However, there is a new driver IJ Scan Utility and I downloaded it already after that installation of Sierra and the scanner works fine, as also directly print something (e.g. on the Web).

  Now, after several days of testing and I was wondering, I tried this yesterday:

  Instead of the above command, I used (which I do when I want to save it to the desktop) command + shift + 4.  I copied the file .png from office, dropped in the TextEdit, printed, and... IT WORKED.

  Copy and leaving fall directly in the TextEdit and printing, is so not working, but let fall the same screenshot on the desktop and copy and paste into TextEdit and it print shops.

  I noticed several other annoying problems to Sierra, some I've reported here (communities), some didn't.  Business-as-usual: first version of an upgrade is full of bugs, which 'disappear' in future versions, until a new update is made available, the loop continues, continues, and...

  He works here.

• Best way to copy a file in the Finder

  I am really struggling with the Mac interface, after having been a user of PC/Windows for decades.  I can copy/move files in Windows Explorer with ease.  On my MacBook, this simple task seems impossible.  My goal is to copy a file from one location to a specific folder.

  In the Finder, I select the file I want to copy and select 'Copy' from the Edit menu.  I then navigate to the folder that I want to place the file, highlight this folder and select "Paste" from the Edit menu.  He went to put in the parent directory of the file I selected, not the folder selected.  Tried to do this by dragging a file (which is really hard when using the touchpad).  When I fall on the folder I want, once again, place it in the parent folder.  As I was doing this on a network (WD Cloud NAS) drive, I gave up and a PC to move the files where I wanted them.

  This is ridiculous.  I thought that Macs were supposed to be easy to use.  I'm almost at the point of return my MacBook to the Apple store.

  Hold down the Option key while you drag and drop.

• Why whs 2011 installation gets stuck to copy Windows files on the HARD drive?

  I try to install WHS 2011 OEM on a HP EX470 software.  I have tried about 30 times without supervision and welfare facilities in the past 4 months and am very frustrated that I can't succeed and purchase the software was a waste of time and money.  I tried 4 hard drives, properly formatted capacity of 250 GB to 2 TB.  EX470 has the original 1620 AMD processor and 2 GB RAM upgraded and qualifies for the upgrade to a 64-bit system.

  Problem with installation assistance tries: Installation says "Copying Windows files", but after a variable time in hours of waiting, growth remains at 0% and finally says "error in installation.  Try to restart the installation.  Same thing happens with the help of the DVD, or by using a Sandisk Cruser formatted and made bootable 16 GB flash drive with a file cfg.ini the instructions online and also tried without the cfg.ini file.
  Problem with unattended installation attempts:  Process completely blind.  Does not install even if left for 24 hours.  Cannot decipher the flashing lights on the Flash drive and thereafter, no installation nor evidence of partial installation is visible on check the hard drive on another computer.  I suppose that the same thing as the installation attempts assisted.
  Looked for solutions online for 4 months, but nobody does the problem of Windows not to copy the files to the HARD disk during installation and what goes wrong.
  Help!

  Hello

  I suggest you post your question to the link and check.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Copy/move files - security problem

  I have a laptop gateway model MP8708, which ran on XP.

  Jack was no longer working with the power cord and the battery wouldn't hold a charge. The computer is unusable without the power supply cord is not an option to turn back on my old Gateway computer. Instead of investing the money in the repair of a computer that is several years old, I bought a new computer.

  On the gateway computer (original), I got my computer set up to always ask for my password before it would allow access after 5 minutes of inactivity proved, or whenever the computer went into hibernation or has been disabled.

  The original hard drive Gateway has been removed so I could copy or move my files from the old hard drive to my new Acer laptop hard drive, and I have a device that allows me to use a USB to connect it to my new computer.

  The new Acer running Windows 7.

  -When I try to drag a file on my new hard drive, I get this: "file access denied. You need give the administrator permission to copy this file. "If I click CONTINUE, I get"file access denied. You need permission to perform this action. You need permission from the administrator of the computer to make changes to this file. »

  -When I try to drag an entire folder of my old hard drive to my new hard drive, I get: "file access denied. "You need give the administrator permission to copy this folder. When I click on CONTINUE, I get: "file access denied. You need permission of the administrator of the computer to make changes to this file.

  I guess it's because I had a password set up, I have * * know the password.

  How to get the old hard drive to let me copy or move these files? They are MS Word files as well as jpg, or audio files, etc., not computer programs.

  Thank you.

  Hello

  Try to take possession of the disc and check.

  a. click on the drive, click Properties and then click the Security tab.
  b. click Advanced and then click the owner tab.
  c. click on edit and then do one of the following:
  (d) to change the owner to a user or group that is not listed, click other users and groups and enter the object name to select (examples), type the name of the user or group and then click OK.
  e. to change the owner to a user or a group is listed in the change of ownership of the area, click the new owner.
  f. If you want to take ownership of the contents of the disc, select the Replace owner of subcontainers and objects of the box.
  g. click OK and then click Yes when you receive the following message appears: you are not allowed to read the contents of directory folder name. Do you want to replace the the directory permissions with permissions granting you full control?
  h. all permissions will be replaced if you click Yes.
  i. click OK.

  Appropriating a file or a folder
  http://TechNet.Microsoft.com/en-us/library/cc753659.aspx

• Windows XP Professional Setup copy iaStor.sys then the OS says that it cannot copy the file iaStor.sys.

  After the RAID 0 disk partitioning, installing Windows says it will copy the files in the file system. The first file is iaStor.sys. My SATA CD drive runs for a few seconds, then there is a long pause, then the OS says that it cannot copy the file iaStor.sys. He goes on to say that I should check that there is a CD in the drive. Any ideas?

  Here's the solution to this problem:

  1. in the disk driver (a:\) root directory create a directory called holiday of $ $OEM existing files as they are, we will not delete or replace anything.

  2. in the directory $ $OEM you have created, create another directory called TEXTMODE

  3. copy all the driver files located in the root directory to the A:\$OEM$\TEXTMODE subdirectory, try to reinstall, it should now work.

• How to copy the files in the folder "folder is empty Virus?

  Recently, my Windows XP system has been affected by the Virus. So I formatted my PC. Before formatting, I copied some files to my HARD 1 TB internal drive. After formatting, I can not open these copied files. It says "File is empty" and it has 0 bytes. But I do know there are a lot of files still present in this folder. I desperately need these files. Please help me. (When I open the file, nothing happens. Just remain here where I started). So please help me.

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you can not access the files copied to Windows XP.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this

  I suggest you to download and run the latest Microsoft security on your computer Scanner and check if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

• I'm trying to copy picture files from C: to D: readers. How can I do

  I need more space on my C: drive and you want to copy the image files on the D: drive and remove them from the C: drive.  I can't find a solution on how to do it.  BACK was easy, but there seems to be no program for that.

  Two ways:

  • Open a Windows Explorer window and navigate to the directory that contains the image files
  • Open a second Windows Explorer window and navigate to the drive D:\ (or to a new folder that you create on D: using file > New > folder).
  • Drag and drop in the 2nd window.  See http://windows.microsoft.com/en-US/windows-vista/Moving-and-copying-files-by-using-the-drag-and-drop-method you can do this one at a time or select multiple files using the CTRL or SHIFT key.  If you use the right instead of the left mouse button while you drag, you'll get a menu that allows you to choose whether you want to MOVE or COPY (best practice is to COPY then DELETE after that you don't know the copy did what you wanted;) MOVE automatically deletes the source files after their copy to the destination).

  Or

  • Open a Windows Explorer window and navigate to the directory that contains the image files.
  • If the left pane of the window does not display a list of common tasks, make sure that the button 'search', or the 'Files' button in the explore toolbar is selected.
  • Select the files to copy/move, using CTRL or SHIFT as you wish
  • Under "file and folder tasks", click on "copy this file.
  • Navigate to the destination folder, and click "copy."

• Error message "unable to copy the file"hiberfil", it is used by another person or program." Problem copying content from your PC to external hard drive.

  Original title: problem to copy content from your PC to external hard drive.

  I use Windows XP 2000 and am trying to restore my pc to factory settings as it is continuously 'stick '. When you try to copy my drive "c" on an external drive I get a message saying "unable to copy the file"hiberfil", it is used by another person or program." Close any program that might be using the file and try again "." What is 'hiberfil' and how do I close it down as I am not aware that I use?

  Concerning

  Pete

  The hiberfil.sys will be created every time that you start... If you put in hibernation enabled in your control panel, Power Options and the file is 'open' to think that you can actually choose to Hibernate at any given time.  When you Hibernate XP gives a note of it and will write a hiberfil.sys sometimes important in the c:\ folder so that when XP fires again upwards and returns from hibernation, XP will read the hiberfil.sys file and return to the situation that you were in when you put into hibernation.

  I use to be a chronic hibernant because it takes less time to return after hibernation as a cold start.  Sometimes, it can actually be slower that a cold so start your system based on the amount of RAM has.  The more RAM you have, the more your hiberfil.sys will, if sometimes it's faster to move with just a cold start if you Hibernate (26,03 seconds for me).

  If hiberfil.sys is giving you a hard time (you would not in any way copy it) disable hibernation in your Power Options and the file will be deleted immediately since it would be is no longer necessary.  That would solve this, but if you are trying to copy the entire C drive, you will have other files to complain after that.

  It is certainly possible to make a complete copy of the C drive, if you want, but you will have to initialize on something next to your drive hard if you want to do this so the XP files are not used - then you can copy anything and everything.  You can get some imaging software of disc that will also help you.

  It depends on what the problem is you want to solve and what you wand to end up with when you're done (so far, unspecified).

  I would work on figure our why your XP is paste and fix it in place.  XP should not be sticky.