After feeding, I can't START PC

Similar Questions

• After update, I can't start PS error is 213:5. Anyone know what it is?

  After update, I can't start PS error is 213:5. Anyone know what it is?

  Hello

  Please see the links below for help:

  Solve the 213:xx question and error Acrobat X and XI Acrobat license

  213:5 configuration error

  Adobe Photoshop elements 12-error 213:5

  Hope this helps!

• After software update today, my password does not work.  My phone is now disabled.  I don't have a backup.  How can I start to use my phone again and not lose all my content?

  After software update today, my password does not work.  My phone is now disabled.  I don't have a backup.  How can I start to use my phone again and not lose all my content?  Help, please.

  You can not

• After a power outage, I can't start after the Windows XP logo.

  Original title: power failure

  Power outage caused the computer shut down when I turned the computer back on it will also further than the xp logo window and start the whole process again, he seems to be in a loop, how do I fix it

  Trying to boot into safe mode by pressing F8 after feeding on.then restart system & try, if not

  Run the disk check
  After starting in safe mode

  Start - Run and type CMD at the command prompt type CHKDSK/f

  OR

  repair the operating system.

  Kind regards

  Chauvet J.

• I have windows xp after the installation of service pack 3 I can only start in safe mode

  I have windows XP after the installation of service pack 3 I can only start in safe mode?

  Hello

  ·         You get the error message?

  ·         What happens when you try to start in normal mode?

  Method 1

  Windows XP can in every start Safe Mode by default. Even if you select the option Start Windows normally, it always starts in Mode without failure. IOW, you can't get out of safe mode.

  This happens if the switch/SafeBoot is added to the Boot.ini file. / SafeBoot parameter forces a boot in safe mode by using the specified parameters. The available parameters are:

  (a) minimal (b) network (c) safeboot: minimal (alternateshell) For more information about the boot.ini switches, see visualization and correction of the settings of the boot on x 86 systems RESOLUTION (a) click Start, run and type MSCONFIG (b) click the Boot.ini tab (c) If you have a dual-boot system, select the entry that is appropriate under the [operating systems] (d) in section downstairs, Startup Options uncheck / hisFEBOOT (e) click OK (f) restart Windows The entry/SafeBoot are removed from the Boot.ini file.

  Method 2:

  If the above method is not the cause, it seems that Service Pack 3 is not installed correctly.

  Step 1: You try to run the system restore from safe mode that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  Step 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  Note: System requirements to install Windows XP SP3

  Reference: Learn how to install Windows XP Service Pack 3 (SP3)

  Hope the helps of information.

• My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  Hello

  I'm sorry to say this, but it points to a UPS of material about to fail.

  You will need to bring the laptop to get it replaced.

  Slan go foill, Paul

• I can only start my computer in Safe Mode - system hangs on startup after installation of updates

  Original title: UPDATES DOWNLOADED PROBLEMS to START NORMAL, MUST LOAD IN SAFE MODE - LOST AFTER 30-40 SECONDS VIDEO

  After the download and installation of updates on my desktop Gateway (FX7020) the computer freezes on me and was forced to shut down hard. After a few attempts to start the computer, I was able to get into safe mode. After some time in the exploration of the event viewer I tried out and re-start of normal BONE. I was unable to make it through the boot sequence and had to shut down hard again. I waited a while and it made back in safe mode, but this time after 25-40 sec. I lost the video, the mouse, the keyboard. Everything was running. I've read a few articles and I hope that I don't have a F... THE OS.

  Thanks any help will be graciously appreciated... RA

  Hello

   
  Method 1:
  You can try restoring the system to safe mode and check:
  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
  You can consult the links for:
  System restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
  
  Method 2:
  If the problem persists, you can refer startup Repair in Windows Vista, which is a recovery tool that can fix certain problems. You can check the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• After turning on my computer I can't start live TV in media center.

  After turning on my computer I can't start live TV in media center.
  It's just there for a few seconds then it gives me a disk error and tells me to restart either the media center or Windows. No help! The only way to get the work TV power is on the backup and Restore Center, and use system restore to return to a previous restore point. The restore point doesn't have to be anything in particular. It may be a system on-demand restore point, before or after turning on the computer. It just makes no sense what so ever.
  My system is a Dell XPS 410 with Vista servie pack 2. I had this problem, since the computer is new, nearly two years ago. Dell support is running out of ideas.

  What are the details of the error which mentions the disc error?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  The manufacturer of the hard drive will have free diagnostic software carefully to check the status of your hard drive.

  The importance only I can get to the system restore solution is the fact that a reboot is involved, if you need to restart just the error disappears too?

  You ran Vista memory diagnostic program to check your RAM?

  Memory diagnostic tool
  http://www.vista4beginners.com/Windows-Memory-Diagnostics-tool

  Can you produce the fault in a clean boot environment?

  310560 How to troubleshoot by using the Msconfig utility in Windows XP
  http://support.Microsoft.com/kb/310560

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/default.aspx/KB/929135

  Are there drivers updated for your Video, cards etc.

  Same question about a possible Bios Update?  Have you tried the Bios to default security is running?

• I've updated to Lightroom and now I can't start, the license agreement will not disappear after the acceptance of this

  I've updated to Lightroom and now I can't start, the license agreement does not disappear after she accepts any ideas?

  Hi Patricia,

  Please let us know very little about, so that we can fix it as soon as possible.

  What operating system are you using.

  You use Lightroom(5/6) as a Standalone Version or its CC.

  In addition, please try and update Adobe Application Manager on your system. See link: can not accept the product launch and end-user license agreement

  Once his finishing update, relaunch the Lightroom and see how it works.

  Let us know if it helps.

  Kind regards

  ~ Mohit

• I can't start with Satellite P10 by pressing the power button more

  I can't start my Satellite P10 by pressing the power button more.
  Sometimes, very rarely its starts when I hold the power button for a while say 10 seconds.

  I tested the power supply and a battery to my friends P10 (of the same type) and both work very well.

  So it must be a problem with the key.
  No idea what to do?

  Thanks for any help

  The best.

  Tobias

  If it s a button or a power supply electronic problem, then you can't do anything.
  In this case assistance by the technicians of laptop would be necessary.

  But the next time that you should try this option if the laptop turns on not;
  Remove the battery and unplug the AC adapter from the laptop for about 30 min.

  After this short period of time to reconnect the two parts and check if the laptop could start.

  Good luck

• Can't start Bios or something else.

  HP p6755a i5 desktop 310;

  I was trying to change my video card stock to a card ASUS GTX 750 standard. The new card did not work. After power off, I put the old card back, and it does not work. Without HDMI, DVI or VGA

  I pluged the screen in the Port on board Dramane and still cannot get the HP welcome screen says press ESC for the Start Menu.

  It is just there like a sack of potatoes with all the fans running.

  I can't start the computer to Windows7 and I can't seem to set up the Bios (ESC, F1 - F12 key).

  The computer appears on the HP welcome screen and says press Esc for installation. If I press ESC and then start the machine, it goes to a screen with the settings of the machine or spec? He also says press Esc to the start menu.

  I tried to boot from a Memory Stick with MS-DOS, disk Windows7 and an emergency Windows, all no boot disk will do. He doesn't want to continue beyond the Welcome screen.

  Please help, I have run out of ideas.

  You may have to return the card and get a GeForce 500 or 600 series card instead.

  Your PC doesn't have any options in the UEFI BIOS to disable secure boot, the map is unlikely to start your PC.

  Take a reading to this thread on GeForce forum. You are not alone with this problem.

• I can't start anything on my computer!

  Hello world!

  I have a problem with my HP Pavilion dv6 laptop, installed brother of new graphics card drivers for me and after that I couldn't start all programs on my computer! He managed to help me start some programs using compatibility mode, but otherwise I can't start anything without the use of compatibility mode, any help would be appreciated!

  Jenna, xoxo.

  JennaFH wrote:

  I have Windows 7 64-bit operating system, I also tried to cancel the changes, but I don't have all the backups accessible to the general public: /.

  Jenna.

  EDIT: Okay, then I found the system restore thing, while it had installed Grand Theft Auto IV and a device driver Package. The next day, when the computer started to the top of the screen was all dim, so it uninstalled and reinstalled, but the screen problem dark fixing done in other numbers like Skype, Chrome does not. There those who work, but now nothing works at all, I can start some programs using compatibility mode, but others not.

  I used to be able to just everything starts with a double click, the best option would be to come back all the time until it has installed the game or the graphics card drivers?

  Thanks in advance again

  Jenna, xoxo.

  "I used to be able to just everything starts with a double click, the best option would be to come back all the time until it has installed the game or the graphics card drivers? Yes. That would be the best option. Tell your brother that when installing graphics drivers for a HP laptop, always use the provided HP drivers. They are changed by HP.

   

  Best regards

  ERICO

• Uninstalled emet but after the applications would not start.

  Uninstalled emet but after the applications would not start. Internet Explore tries to start but flashes and disappears, even with Excel. Word starts but gets an error when you try to save. Lucky got Google chrome from another pc and installed so I can at least access the internet. Reinstalled Explorer, office repaired, cleaned the registry, but still no start. What should I do?

  A moderator has moved this thread to the programs Windows of Feedback Forum Forum.

  tried, nothing worked so I uninstalled office and re-installed from disc. Explorer 8 still does not work, but I uninstalled a with explore 7 updates and automatic update started and explore 7 worked. Thought I'd try installing explore 8 new. It worked, even if it failed with the Download Manager. Now all back to normal. I would be careful about the use of EMET, unless you know exactly what you are doing. Not a lot of faith in either the Download Manager.

• How can I start/re-start Windows professional XP in safe MODE

  How can I start/re-start Windows professional XP in safe MODE? Aid filw I get only instructed on XP Home Edition and the buttons and it tells you to follow the guests do not appear in the professional edition. I need the instructions for Pro.  Can someone help me with this?

  Original title: Safe Mode

  You can start either home or Pro in SafeMode by this technique...

  Keep F8 hitting twice a second immediately after you have switched on the PC. You should get a boot menu where safe mode is selectable using the up/down arrow keys.

  Or, use the msconfig utility. When you do it this way, Windows starts in SafeMode permanently until you reverse the changes in msconfig...

  • Click Start
  • Click on run
  • Type msconfig and press enter
  • Click on the CHEST. INI tab
  • Check the box for/SafeBoot
  • Click OK
  • Restart the PC when prompted

  Tricky

• I can only start using the list of Windows XP

  Original title: WINDOWS XP STARTUP W/DISC PROBLEMS

  I have a problem starting my desktop xp computer. I can ONLY start with the XP disk, of course, I have to press 'R' over and over again. After a few tries, it starts well, how can I start up without having to redo this process over and over again. I passed by 'MSCONFIG' and past from NORMAL to SELECTIVE startup and even deleted some programs from my hard drive. I can't make changes without putting in my (domain name Name\Administrator). I don't know what could be and am lost at this point... HELP!!!!!!!!!!!!!!!!

  THOMAS

  Hi Thomas,

  ·         Did you do changes on the computer before the show?

  ·         You receive an error message or error code?

  Follow the suggestions below for a possible solution:

  Method 1: Remove all external devices connected to the computer such as printers scanners or USB external hard drives and restart the computer and check if you receive the error.

  Method 2: Try to start the computer in safe mode with network and check if the issue still persists, see the link below to start in safe mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

   

  Method 3: You can try and perform a system restore to a date when things were working well and check.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  In addition, you can also download the minidump files so the experts here can analyze the cause of the problem.

  How read partial memory dump files that Windows creates for debugging

  http://support.Microsoft.com/kb/315263

   

  Use SkyDrive download collected files and post screen shot/image

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  Let us know the results.