After game login Windows freezes

Similar Questions

• Satellite L855 and Win8.1 - Touchpad stops working after the login window

  New laptop running windows 8.1 Touchpad works for about 30 seconds after windows starts and then stops. I have tried downloading drivers the most recent of the Toshiba site, but it does not solve the problem. Tried the function keys of the touchpad, but it's not the question. Called Toshiba support and they suggest to send it in for a factory reset.

  I have also a problem with AMD graphics will split after that computer screen goes into sleep state. Downloaded and installed drivers more recent for it on the advice of Tech support, but not fixed, or the other.

  I'm a little worried because a research shows these two problems are not uncommon and IV ' e spent a lot of time to copy data and install the software, don't want to lose him and wasting time waiting for factory reset if I need to return ot.

  Anyone have any ideas?

  Factory reset is the best way to solve this problem, but you have upgraded your machine following the instructions step by step http://www.toshiba.eu/innovation/generic/windows8_1-message/?

• Display faded after upgrade of Windows 8

  Hello

  I have a laptop Sony Vaio VPCS111FM which worked perfectly well the Windows 7.

  Updated to Windows 8 Pro via the download $ 40 from Microsoft on 11/01/2012

  Now, the brightness of the display is constantly all the worse that all cursors are maximized for each power setting.

  Adaptive brightness display has been disabled and the brightness has been optimized in the Vaio control center.

  When connected to an external monitor, the brightness levels are fine.

  Restored hard return to the factory with Windows 7 and the brightness settings was perfectly fine. Re-installed Windows 8 as a new installation , remove all software and files in the event of any compatibility questions it however the brightness remains low after the login Windows 8 screen even if all levels of brightness are maximized.

  Any help would be much appreciated as I imagine that several users have it if I'm after a clean installed.

  Hello everyone.  I had figured this out earlier for the VCPS111FM with Win8 beta.  After the complete reinstallation of Windows 8, it took me about 3 hours to understand once again, but I finally got.

  1. go to http://esupport.sony.com/US/p/swu-download.pl?mdl=VPCS111FM&upd_id=7237&os_group_id=6

  2. download Vaio Care

  3. Once this is installed, open Vaio Care and click Advanced tools

  4. click on restore and recovery

  5. click on drivers and Reinstall applications

  6. you should receive a popup "recovery partition has a different operating system.  Are you sure you want to continue? '-click Yes

  7. click on next

  8. scroll and click the checkbox next to the graphics driver (Intel)

  9. click on next

  10. click on start reinstall

  This should fix the problem as it has done for me (without a reboot, you should immediately see brightness increase).

  Good luck!

• My Windows laptop, 8 crashes after I login

  I bought a portable windows 8 a year ago and it's kinda a crap laptop. It freezes all the time and struggled to do simple tasks but recently, whenever I have login, it freezes. about 20 seconds after I opened my desktop computer that everything freezes. the mouse keys, everything. the only thing I can do is force to close the sense that I don't get to use my laptop which is very stressful because I have homework to do. Help, please!

  Hello

  Computer which model is it?

  Another person had a HP laptop with similar problems...

  The problem has proved to be an update from HP Support Manager for HP Assistant Manager...

  If this has happened since the machine was new, so I would inquire on what kind of things was the Assembly of the computer running...

  Many things can be disabled in the startup of the Task Manager tab and turned back quite easily...

  You can also search in MSCONFIG... just type in RUN...

  Click on Services and check hide all Microsoft Services.

  Again, things can be turned off and on again easily... This requires a reboot...

  Keep track of what settings change you so that you can return the unit to the way it was...

• machine freezes, slow start, apps to open slowly, the login window is not responding

  I had a problem with my macbook pro for a while now where the machine becomes completely insensitive and I pressed the power button to restart. I already posted about this problem and although the answer was very helpful, I did not understand 100% how to solve the problem and since that time, the thread is not answered. Please follow the link to the thread below and I hope someone can help me more. now, he becomes desperate enough that it happens more and more frequently. Sorry, repost and old thread but I don't know what to do and I don't want to replace my laptop if I do not.

  Thanks in advance

  machine freezes, the login window is not responding

  Link Davis is one who can read this report. How much memory you have installed? Could you run an EtreCheck and post it.  http://www.etresoft.com/etrecheck

• When I play games in Windows Vista, the game freezes and the sound is distorted. I have

  I have problems playing my games in windows vista 7 the sound is distorted and the game freezes. It becomes very slow.  32-bit computer laptop Dell Inspiron

  Hello

  You can check if the third-party application is causing games freeze. To identify which application can be the question originally configures your computer to clean the start State and follow the troubleshooting steps in the article. To configure your computer to clean boot follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• AoC crashes on black screen after upgrading to Windows 7

  My upgrade to Vista (64 bit) to Windows 7 appears smooth, with all works well. When I tried Age of Conan mmo for the first time, he loaded the game, but within seconds, the screen started flickering black/game/Office a few times alternately between the three with in game its operation across all three screens. After 30 seconds, the screen freezes on the game screen, or freezes on the black screen or briefly blue screens (no time to read the error message) and the computer restarts.

  I have updated drivers for my card (Nvidia 8800GT) video with Windows 7 compatible drivers, and the problem persists.

  The game went well on before Vista upgrade.

  Help!

  Thank you

  Windows Update has nothing to do with the upgrade of Windows. Posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7programs/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• cannot access windows update - windows freezes a startup (error 0x8007043C)

  original title: cannot access windows update - windows freezes a start-up

  Error number: 0x8007043C when I try to access windows update. I tried to restore my computer to an earlier date without result. Windows hangs after login. Not sure if this is a update problem or another problem.

  Error number: 0x8007043C when I try to access windows update. I tried to restore my computer to an earlier date without result. Windows hangs after login. Not sure if this is a update problem or another problem.

  Do some basic cleaning and updates that may resolve your problem (also - check your time and date - as well as your setting time zone...)

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you will use the aggressive version if given a choice):
  How to reset the Windows Update components?

  Reset.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Games on Windows boot camp

  I have the mac pro 13 "retina with 2.9 GHz intel core i5, 8 GB ram and intel graphics iris 6100 1536 MB. I can play any game on windows 10 after I installed it via bootcamp or only some games? my friend says I do not meet the min requirements, but it is biased when it comes to Apple products, so I would like to know some people who really know what they are talking about instead please.

  You can run any Windows program, including the games, so that your machine meets the requirements of the application in question. Once install BootCamp and Windows installation, you actually turn your Mac into a Windows PC. Find the requirements for the game you want to run and compare them to the spec of your machine.

• HP ProBook 450 G0: Problems of HP ProBook G0 450 icons after upgrade to Windows 10

  Hello

  2 days ago that I have upgraded to Windows 10 my HP ProBook 450 G0.

  Then I realized my graphics drivers are not working, I tried to update to the last registered in the section to download the drivers for my model.

  After that, I got BSOD and couldn't even see login screen. I removed the update installed in safe mode.

  If at the moment I use some default driver I guess.

  In the Device Manager on Intel(r) HD Graphics 4000 I something like (manual translation) "Windows has stopped this device because of disorders raported. (Code 43) ».

  I can't use the HDMI & display internal. To use the HDMI, I have to restart my PC. After using HDMI, I can't use internal display. A lot of questions, because this driver...

  I really need this, as I am a teacher and I ', using both internal display & HDMI for presentations...

  All solutions? All the newspapers that I can get to help you help me ?

  Kind regards

  Jakub Krol.

  Hello

  In case anyone is interested, my PC is now fixed

  More information: https://windowsforum.com/threads/graphics-issues-after-upgrade-to-windows-10-system_service_exception-sgfxk64-sys.220205/page-2 .

  Kind regards

  JK.

• Satellite A300 - windows freezes

  Dear users of the forum,

  I have 1 Satellite A300 laptop computer with vista.

  recently, o pointed out, if I right click on an icon on the desktop, the freezing of the system to meet and the circle to keep vista on spinning.

  If I pressed again and again, the box of dialogue "program has stopped working, close/restart/wait option" made its appearance.

  after reboot, the windows sidebar gadget all yahoo messenger icons appearing in the task bar at the bottom (which normally does not appear in the taskbar), and they don't react again to close / minimize/maximize whatever it is in the taskbar.

  can someone diagnosis disease?

  It is not easy to offer a diagnosis based on your story.
  It will be interesting to know since when this happen?
  You have installed software or installed updates in recent days.
  Try to roll back the OS to an earlier time to see if this will be fixed.

  By this simple step please start and inform us about the result.

• J9L60PA: No Audio beats available after update of WINDOWS 10

  No handler found when audio beats or app I've upgraded to Windows 10... rather have download realtek hd audio that offers bad sound... my laptop comes with beats audio speakers... where should I get my beats back audio Panel... Please help

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP laptop and your Beats Audio does not work properly after upgrading to Windows 10. Here is a link to help solve the speakers and sound does not work correctly.

  The link by using the Windows troubleshooting tool is the best for this situation.

  You can also try.

  1. right click the speaker icon in the lower right corner of your time.
  2. click on playback devices.
  3. click on the speakers.
  4. click on properties.
  5. click on the Advanced tab in the Properties window.
  6. change the default Format menu drop-down of the highest quality 192000 Hz.
  7. click on apply. Reboot the laptop.

  You can try to use theWindows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  If that's not enough to uninstall the Realtek HD Audio and other that are listed in Device Manager, click the arrow next to its video and controller to expand this category games
  Click on it Audio IDT high definition (HD), and then select Update driver software.
  Select search automatically for updated driver software.

  The laptop must find and automatically install the updated driver.
  Once the installation is complete, restart your laptop.

  I hope this helps.

  Thank you.

• Can't sign in to games for windows marketplace using windows live id error: 80048439

  The problem:

  I bought a game a few days ago, but cannot sign in to games for windows marketplace. I try to connect using the GOOD live ID and the password that I used when buying this game on the website (it works when signing on my live account on internet and on this forum). A few seconds later, he says:

  "Unable to connect. ID Windows Live ID or the password entered is not valid. Enter your information and you reconnect. "error: 80048439 cannot authenticate.

  I tried several fixes that are found on the pages of support for games for windows live.

  I have reset my password

  I deleted all my cookies, cache files and internet (several times)

  When I try to connect to live in the game (using a steam game) I can't connect either.

  I looked in the port forwarding, but there is no explanation on how to do it on my router (actiontec q1000). I don't know if the port is the problem or what. It is not a new modem, and it worked a few months ago.

  I used gfw live years and had no problems until now and I swear that I use the password and login name.

  Any info I can get to solve this problem is appreciated.

  Hi theblur05,

  Method 1: You can see the steps mentioned in the article below, which deals with a similar question

  Games for Windows LIVE: you can not connect to LIVE and you receive an error message

  http://support.Microsoft.com/kb/938705

  If the problem persists, please post your request on the Forum Windows Live for more expert help

  Windows Live Forum -http://windowslivehelp.com/

  You can contact the games for Windows, Support for more
  http://www.gamesforwindows.com/en-us/support/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Games for windows live cannot connect

  Games for windows live cannot connect to the internet, this problem started last week when I tried to play Dawn of war 2 online. At that time I was running Vista Ultimate 64 bit and after exhausting all existing boards on this site and many others, I decided to completely format my PC and start again with Windows 7 64 bit, but I have the same problem exact. only now my profile is no longer stored on my PC because I formatted so I can still play offline.

  After trying to connect, it says "the profile could not be connected to LIVE. "There may be a network problem or the Windows Live ID service may not be available" option on the GFWL client network status says:

  NIC: Local 2 network connection

  Internet IP address: not connected

  Local IP address: 192.168.2.9:0

  System link address: 192.168.2.9:3074

  Account PC: PC.000000000000

  UPnP: Not signed in

  PC ID: 0X10DF99910D0A00E8

  I have made the following recommended to others in similar situations, has passed all the recommended ports (TCP 53,80,443,3074) and UDP 53,88,3074, installed and running Windows fix it, Microsoft.Net 4.0 update, installed and run Winsockfix, disabled windows firewall (I have not installed any other protection software yet) compatible UPnP on my router, changed my static connection type and still no progress. My router is supported and I am in a country supported direct (UK). This my independent being, but I also experience certificate errors when you use Microsoft sites, which is strange as I said that the Web site of the company that developed the program that I use is dangerous. It's my totally finished in guys any help would REALLY be apreciated. Cheers.

  I can't believe ive finally resolved, hours after validation. the button on my motherboard battery had been dislodged and my date and time have been reset in 2009, whenever I stop my PC. everything is working fine now GFWL working and no more certificate errors.

• Games for windows live client cannot install

  Please help me to install Games For Win Live
  Vista home sp2 with 2 n 2g of ram 32-bit core system.
  After downloading the file necessary gfwl, after installation, when I try to connect using my valid passport id in the Launcher error message will produce.., stating that my client had problem and work stoppage. Need help please, I have tried with my laptop xp no problem at all, it is only with my office. I tried to many now install and uninstall process.
  Thank U.

  Hi D33Viilz,

  I found a post on the Games for Windows Live site that has addressed your question.  Here are the steps and the link to the original post:

  If you're running Vista, you can not uninstall all .NET Framework before 3.0.

  If you haven't already, you will need to download 3.5 SP 1 here: http://www.microsoft.com/downloads/details.aspx?FamilyID=AB99342F-5D1A-413D-8319-81DA479AB0D7&displaylang=en

  If you are running Windows 7, it should have the most recent of the .NET Framework.

  Also, I would say that you are using the tool Mod proposed (http://support.microsoft.com/kb/290301) to completely remove Microsoft Games for Windows LIVE and LIVE Redistributable.

  When you have finished using the cleanup utility, check that it has been removed through programs and features.

  Restart your PC, and then re-download the newest Client of Games for Windows LIVE here: go.microsoft.com/?linkid=9640147

  Original Link: http://forums.gamesforwindows.com/p/8695/81754.aspx#81754

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think