After I log in to Vista my screen turns off

Similar Questions

• Inspiron 9300 screen turns off after the Windows Logo screen

  Inspiron 9300 my wife became severely infected.  I thought I had some weird things start popping up of the problem decided to wipe the hard drive and start over.  Unfortunately, I don't have to restore disks when I bought the computer.  I install windows xp pro service pack 2 full retail version.

  Installation was not a problem until I installed the driver ATI Mobility x 300.  I followed directions for installation from the website, do the installation of xp followed of the dell system software update followed of chipset followed video driver.  After that whenever I put on, the screen turns off after the Windows Logo.  The computer is still running and if I plug an external monitor everythng is fine.

  I tried all the troubleshooting tips I've seen in this forum.  I did a full install twice. made of safety boots (all right), started in VGA mode (works fine), I ran diagnostics from fn on startup, including express, extended and video tests and they pass all the controls.  I'm sure it's a software problem, but have been unable to solve.  I've updated the ATI bios although when I run it says already installed and done one installs x 300 driver on 6 ttimes own.

  I know it must be something simple that I'm missing. My system is the Inspiron 9300 with 2 GB of ram and the mobility x 300 card.  Any help would be appreciated.

  
  

• Gigaframe L81 - after 2-3 seconds, the LCD screen turns off

  Hello!

  I think, I missconfigurated my camera... I put the automatic light (auto light) options, then the LCD is turned off. OK, its light of day here, but how can she Cook?

  And - perhaps because of the thing said? -its LCD screen turns off every time, when I push the power on button. I'm tired of using the reset switch, but she has - at least, in the LCD - no effect.

  Device is reset, then lights up the screen, I see him starting, I can touch control "buttons" on the right side (I can see the blue lights), but after only 2-3 seconds, the LCD display turns off again.

  Although I can do anything on my camera - attach PC files, copy or dele (ordered from Windows) etc. I just don't see anything in the LCD screen.

  What's wrong?

  If it still does not work after resetting it, then it may be a hardware problem.

  I think that you will need for repair/replacement.

• How can I get the screensaver to stop after a few minutes, while the screen turns off.

  original title: computer sleeps

  I leave my computer on all night.  When I'm done with it for the day, after 5 minutes, the screen saver turns on.  How can I get the screensaver to stop after a few minutes, while the screen turns off.  What we call that?  Sleep is - this Mode?  Hibernate? Thank you!

  Hi miztex37,

  ·         You want to put the computer in sleep mode?

  See the following article to see if it helps.

  Microsoft Windows XP - automatically put your computer into standby mode

  See also:

  Microsoft Windows XP - manually put your computer in sleep mode

• LCD screen turns off after a few minutes

  My screen turns off after a few minutes, even if the parameters to be able to say that he should turn off after 60 minutes of no activity.  Before this date should activate the screensaver after 10 minutes of no activity.  But in my case the active screensaver ever and my right monitor fades to black.  What can I do to fix this?  Is there a registry setting that has changed I don't know?

  -penciline

  I checked power options, the first thing, and then I checked the (NVIDIA) graphics card Control Panel to see if there is a setting for it.  The figures that I had in my previous post came from my power options, but I don't know how standard power who do not have the numbers that it would affect the schedule/performance options.  I went to advanced settings.  But I also rebooted my computer which solved the problem, in my opinion.  I'll have to sit and wait to be sure, but I'll get back to you on that once I have test.

  -penciline

• Latitude D610 screen turns off after the Windows XP loading screen

  I'm having a problem with my Latitude D610 where after the Windows XP loading screen, the screen turns off completely. No BSOD, no login screen, just a white screen. This started happening at least a year, however, I bought a new computer if it is passed to the hatch. I tried the system restore when it appeared first without success. The computer starts in Mode safe. Any suggestions?

  If it starts in mode without failure, then its almost certainly a driver and with the blank screen problem, I suspect a display driver.

• Satellite A200 - screen turns off without reason

  I have a Satellite A200-E530D on Windows Vista Home Premium. For a month, I had something strange happening on my computer, shortly after the start, the screen turns off. without good reason! the only option I have is hard to system boot and everythings... Although a few times after the restart he still went.

  I tried to upgrade to the last poster of drivers (I have an Nvidia Geforce Graphics card 7300 Go with 128 MB of VRAM)

  Another weird thing, Vista SP1 does not install on my machine. tried to uninstall my Anti virus, but that did not help either one.

  Can anyone shed light on my dark screen?

  Hello!

  You have the same problem on an external monitor?
  I m not sure if it s a display problem, mother or software card

  Do you have what display driver installed? You have downloaded the driver from the Web from Toshiba site?
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Satellite A210 - 17L - screen turns off

  Hello people,

  I have a similar problem to [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=61255&tstart=15], screen turns off by itself randomly, but backlight remains lit and laptop always seems to work (judging by fan). This started after upgrading Vista to Windows 7 (new installation), there was no problem before. I tried to update the display driver, first ATI Catalyst, then Toshiba official one, the customer pays less often, but still doesn't work, it's nice embarrassing ;) It occurs regardless if the laptop is used or just slowed down and is not caused by overheating or saving energy, also cell is generally connected with mounted battery.

  I have the last opportunity to go and update the BIOS, but I'm in fear of bricking the thing, so he would try as a last resort.

  Any idea guys?

  Thank you

  Hello

  There is an easy way to solve this problem: connect an external monitor and check what happens. If everything is ok on the external monitor installation (Windows) and internal monitor are ok, the problem must be internal monitor itself.

  If it s the monitor itself it s inverter FL, LCD cable or LCD itself. That s is not easy to say on this virtual path for your laptop needs to be checked to an authorized service provider. Guys can make an accurate diagnosis.

• Expansion of the files is at 27% and then my screen turns off? : s

  Hi all, I read the other thread on this subject on the website, but as usual the problem I have is simply a little more boring, I would like to re-Morphix vista compeltely but in order to do so I obviously need to go through this process. As the title says, when he reached 27% on the expansion of the files after the first reboot, it goes no further, then after awhile my screen turns off. IM typing this text from my laptop at the moment in the hope that all of a sudden my screen will restart and it will continue, but I doubt it very much.

  I understand more information may be needed to help me then please just ask. Thank you.

  P.s. This problem during one accurs installation from the cd rather than boot. When I try to boot from the drive and runing installing it, my screen turns off agan normally just after entering the cdkey for vista.

  I have no idea why this is happening, but if I have the sort I would be very very happy :)

  EDIT: A little later and the screen is back on, sound saying "Please wait a moment while windows prepares to start for the first time" then after that, there are a lot of points and moe points keep coming (etc.) I hope it's a good thing: S

  Hello

  1. are you able to boot to the desktop now?
  2 How much RAM you have in your computer?

  If you are unable to boot to the desktop, then unplug all external devices and try to install windows again.

  If the installation fails again, then start in the system recovery options, and run the Windows memory diagnostic tool.

  Refer to this link for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Access code is lost as soon as the screen turns off

  When I turn my wrist after that my Apple Watch screen exploded, I need to enter the access code. I turn on the wrist, the screen turns off, I turn back, screen lights up, I need to re-enter the password. And so on and so forth. The watch does not maintain the code.

  I am white white, is not dense hairs on my wrist, no tattoos and I wear the watch very well on my skin.

  The funny thing is: it is a replacement watch, I got today. The other had the same problem, but this is probably because the bottom of the watch with the sensors fell, must have damaged the sensor cable. But this one is brand new.

  Hello

  Make sure the wrist detection is enabled:

  • On your iPhone, in the application of the watch, go to: My Watch (tab) > General > detection of wrist - turn on.

• Satellite A100 - 784 PSAANE - screen turns off automatically

  Hi friends,

  I have a Toshiba Satellite A100 - 784 PSAANE with windows visa Home Basic edition.
  Now for 15-20 days I am facing a strange problem. The screen of the laptop emits a sometimes (not necessarily every time) and then when the frequency increases the display turns off automatically!
  Then I must Hibernate or he put laptop to sleep to find again the screen... Seriously, I don't understand the problem.

  Please help me.
  Thanks in advance

  Hi Julie,.

  It sounds as if something is harming your graphics driver causing the display to turn off. If the problem occurs only when you use certain applications or only started after installing a new application you may need to restore your system to a restore point before new applications have been installed. As a test, you can try to start your system in safe mode and see if the problem persists.

  I also recommend that you re-install your graphics drivers to see if it improves the problem.

  Other possibilities are that your graphics chip is a failure or overheating causing this problem in which case you have to return your laptop to a Service approved for the additional diagnostic agent.

  My last thought is that you may have a problem with the inverter FL (the component that provides the lighting of your LCD screen). Check, when the screen turns off, if you can still see a residual image on the screen. If yes then the FL inverter is definitely at fault.

  Kind regards

• Satellite 1800 - 752S - the screen turns off

  Hello world.
  I have a satellite 1800 - 752S.
  Since an ew months ithas a weird problem: the screen turns off. If I press and release the button the lid on what it is, but after that turns off again quickly. OT goes off sometimes immediately, sometimes after a few minutes, or even hours. Sometimes it provides be when I run out of battery and bothers me on AC, sometimes against. It works fine, after I turn sleep or hibernation several times, and after a reboot, it bothers me. I've updated his BIOS for the lates on this site, which would not help. I guess it's a hardware problem, because it's the same problem under Linux, and I tried to install different versions of drivers and windows (not only the one of the recovery CD). Anyone have the same problem before. Any help will be appreciated.
  Thank you very much
  Roman

  Hello

  I think you're right, it's a hardware problem. But to be sure, try connecting an external monitor. If it works without problem while laptops, screen turns off, then it must be a hardware failure.

  I guess it's a problem with the FL inverter. You have to give your machine a service partner Toshiba for repair.

  Good bye

• T420 screen turns off and turn it back on when the AC adapter / CC is attached or removed

  You are working on your machine, staring at the screen and the power failure... Yes - something quite common in these parts of the world... but no worries, the screen darkens slightly according to the diet plan and you hardly notice. Then, when the backup generator kicks in and the power is activated again, the brightness of the screen is back to your usual setting. Meanwhile, it is not a gene. Right?

  Well, that's what should happen... except that most of the time it doesn't work! Most of the time, the screen turns off and then turns on remove the main power and reinstall it. Note that this never happened once with T61 or T41p.

  Initially, I assumed it was because I had an external monitor attached... maybe it was to reconfigure something there? But then, it happens even without the external monitor. Then, I tried looking for the video driver updates... maybe this bug had been fixed to the... no luck there.

  So, finally, after having known this more often now, I thought I would get feedback from you all. Any advice?

  Check the Intel Media profile with the power settings. If a battery is "Maximum economy" mode then it should be in Exchange for 50 Hz to 60 Hz... Change it to balance or maximum Performance and see if its ever-changing from 50 Hz to 60 Hz...

  If all else fails, try updating the video driver, it might be a bug in the previous version of the driver.

  See this KB for more information

  http://Forum.Lenovo.com/T5/T400-T500-and-newer-T-series/T420s-screen-refresh-rate-drop-to-50Hz-when-...

• Y560 screen turns off automatically

  Hi all

  My Y560 Ideapad screen turns off after 1 minute of inactivity.

  The parameters of current energy said it should do so after 5 minutes of inactivity. Any ideas?

  Figured it out. Turns out I have my screensaver set to 1 minute, and it was 'white '. Finally I remembered, I got "no screen saver". Maybe it has changed when I changed my desktop theme. (this is for Win 7)

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973