After installing Windows 7, linking my old drive with Windows XP on it will let see me all the data in the drive?

Similar Questions

• I have an Epson Perfection 1640SU. My operating system is Windows 7 Ultimate 64 bit. Epson does not a driver for 64-bit. If I install Windows XP mode, I will be able to download the driver of Epson XP and use this scanner?

  I have an Epson Perfection 1640SU. My operating system is Windows 7 Ultimate 64 bit. Epson does not a driver for 64-bit. If I install Windows XP mode, I will be able to download the driver of Epson XP and use this scanner?

  Best way for you is to use Vuescan. I use it in conjunction with a Canon Lide 30 and it works very well...

  http://www.Hamrick.com/

  There is a trial version... Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• No wifi after installing windows 7 on hp pavilion g6

  Hello

  Could you guys help me please with my hp pavilion g6 with the product ID number A4G31AV and pci\ven_1814 & dev_539a & subsys_1839103c & rev_00.  I installed windows 7 on my laptop, but I have all the drivers so my wifi is not workink I can not automatically install the. Please help me as soon as POSSIBLE.

  Thank you very much

  Reka.

  Hi Reka,

  If necessary, download and save the following Installer on another PC, then transfer them to your laptop and run them.

  First of all, download and install the Chipset driver at the following link.

  Chipset Driver - Windows 7.

  When this has completed, restart the laptop.

  Then, download and install the WLAN driver from the link below.

  WLAN Driver - Windows 7.

  All drivers for your laptop can be found on the following link.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5278311 #n300

  Kind regards

  DP - K

• XZ029UA #ABA: missing after installing windows device driver 7

  Hello

  I installed windows 7 on my HP dv7-4285dx.

  The wireless network connection does not work.

  The following devices under 'Other devices' indicates that the drivers are not installed:

  1 Intel Centrino Advanced-N + WiMAX 6250

  Hardware ID:

  USB\VID_8086 & PID_0187 & REV_0000

  USB\VID_8086 & PID_0187

  2. network controller

  Hardware ID:

  PCI\VEN_8086 & DEV_0089 & SUBSYS_13118086 & REV_57

  PCI\VEN_8086 & DEV_0089 & SUBSYS_13118086

  PCI\VEN_8086 & DEV_0089 & CC_028000

  PCI\VEN_8086 & DEV_0089 & CC_0280

  3 PCI Simple Communications Controller

  Hardware ID:

  PCI\VEN_8086 & DEV_3B64 & SUBSYS_163D103C & REV_06

  PCI\VEN_8086 & DEV_3B64 & SUBSYS_163D103C

  PCI\VEN_8086 & DEV_3B64 & CC_078000

  PCI\VEN_8086 & DEV_3B64 & CC_0780

  4 unknown Device

  Hardware ID:

  USB\VID_138A & PID_0005 & REV_0 < 90

  USB\VID_138A & PID_0005

  4 unknown Device

  Hardware ID:

  ACPI\HPQ0004

  * HPQ0004

  Could you please share links for the above drivers?

  Thank you

  FADD

  Hello

  Please download and install #3 first, then restart. After that, install 1,2,4 and 5.

  1 and 2: article 6 of the following link:
  https://Downloadcenter.Intel.com/SearchResult.aspx?lang= & ProductID = 3199 & ProdId = 3199
  
  3:  Intel Management Engine Interface (MEI) driver
  https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng & DownloadType = drivers & Keyword = Intel + Management + Engine
  
  4. http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us & lc = on & softwareitem = ob-105093-1
  
  5. HP 3D DriveGuard Software:
  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63786.exe

  Kind regards.

• clean install of Vista on an old drive hard ide after drive failure hard sata - oem version now get "the limited functionality" due to "unauthorized changes" had no problems for 3 years until this!

  I did a clean install of vista on an old drive hard ide after the disk sata hard down - (oem version) now get "feature limited" because of the "unauthorized modification" had no problems for 3 years until this!

  Hello

  It's a shame you don't know the exact name of the virus

  Malware can cause non-genuine messages appear

  but try this:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• After installing windows optionally updated my display driver is the cause of problems

  I have DELL Inspiron 14 with windows 7 home preium

  After installing windows optionally updated my display driver is the cause of problems
  Ran troubleshooting it says "material changes could not have been detected.
  Help, please
  Thank you

  Use the function "restore" to restore your system to a point before installing optional updates in windows.

  After that, go to Windows Update and 'hide' the update that caused the problem.

• SD card is not working properly after installing windows 10

  I have a MacBook Pro (retina, 13 inches, early 2015) with EL Capitan 10.11.5 and after I installed 10 windows using bootcamp, everything worked fine at first, but after I deleted my part of windows and then installed windows 10 the second time, the SD card is not working properly. She mounts only if the computer shuts down first, and then start. If I take the laptop directly, the SD card will not rise. The same thing happens when I switch systems using a control option key or bootcamp Center where when I switched to another system, the SD card that was mounted on the old system does not appear in the new system. I was trying to solve this problem remove the part of windows before you reinstall it again once, so I found that after I deleted the windows part, the problem is gone and it reappeared after installing windows 10 even once. I also found that after I installed windows the total volume of hard drive (128g front) became 121g.

  Hello LorinMax,

  Thanks for this info and choosing the communities Support from Apple. I know the importance of your work with your Macbook Pro SD card!

  If I understand correctly, you cannot use your SD card, unless you stop and then restart. Because this behavior started when you installed Boot Camp, I would start with the following steps:

  1. first of all, start by repairing your hard disk in disk utility to correct the unexpected problems that could be the cause of this behavior.

  Disk utility (El Capitan): a disc repair

  2. use Mode without fail to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory.

  Try safe mode if your Mac does not end commissioning

  Graphics performance limited in recovery of OS X or in safe mode

  3. According to Boot Camp Installation & Setup Guide, you may need to back up your personal data and reinstalling OS X, then reinstall Windows via Boot Camp and related support files.

  Boot Camp Installation & Setup Guide

  Backup of your Mac hard drive

  OS X: on OS X Recovery

  See you soon!

• After installing windows XP sp3 do not work my motherboard drivers intel

  After installing windows XP sp3 my motherboard drivers intel do not work. My mother board D845 GLAD. What could be the problim?

  Try reinstalling the drivers for your motherboard chipset, you can check this link to download the chipset driver:http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Desktop+Boards&ProductLine=Intel%c2%ae+845+Chipset+Family+Boards&ProductProduct=Intel%c2%ae+Desktop+Board+D845GLAD

  Also, try to download the drivers from your computer manufacturer site... Their number is 800-936-5700, and they are open Monday - Friday, 05:00-21:00 Pacific, Saturday & Sunday, 06:00 - 15:00 PST. XD

• OfficeJet 6500 nit scanner works after installing windows 7

  Is there a fix for Officejet 6500 scan does not not after installing windows 7?

  Hello

  Driver and applications in support of Windows 7 can help. You can download from the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?CC=au&LC=en&DLC=en&product=3795314

  Kind regards.

• Please, please help. No sound from my sound card on board after installing windows 7

  I just installed windows 7 ultimate 64 bit on my computer that previously had windows xp professional sp3 top.  My motherboard, what I don't know, is an a32gv11c from ASUS with a team of a soundcard SoundMax.  I have absolutely no sound and can't seem to find the drivers for it anywhere.  Y at - there anyone out there that can help me to find the driver I need to get a sound?  Help, please.  Thank you.

  I know it's my advice, which means that the hardware manufacturer, who has done this.  The installation for the integrated sound card cd says that the current operating system is not supported, which to me makes sense because this material was released before windows 7.

  All documentation is in stock and not accessible.  I looked inside to the motherboard and can't seem to find any useful information pertaining to the brand of it...  I never spent by with any programs driver utility because my model did not appear.

  Issues that everyone seems to have is with no sound from sound card after installing windows 7, not just isolated to my sound card.  I have a hard time believing I am eternally screwed with no sound from my computer because of my hardware not supported under windows 7.  There must be a solution out there.  I realize that I should have found that now but can not which is what brought me to this forum.  Someone knows and can help me.

  You are not 'for always screwed"- you can always buy and install a sound card which the manufacturer supports their product under Windows 7 - operating system, you choose to run.  The trick is to have a piece taken in charge (by the manufacturer) hardware or software - * under the operating system you choose to run *.

  Yep - you've had this old Ford Mustang you bought this Nitro kit for... But now that you have this new Ford Mustang - Nitro kit may not work.

  Your only real solution: get a piece of hardware - audio device - supported under Windows 7 by its manufacturer.  Else do you play with fire, may or may not work and even if it does not, could be broken by the next patch or update.  If you have a PCI or PCIe available slot, find a cheap good sound card (trust me - the one you had would have qualified as cheap) and throw it in.  15 USD and up to I guess.

• Error message: Ethernet is not a valid ip address configuration and cannot connect to the Internet after installing Windows 8.

  Original title: Internet not working after installing Windows 8. Help, please

  I installed Windows 8 a week before, which had Windows Vista. When I was with Vista, I had no problem with the Internet, I had. But shortly after I installed Windows 8, the problem began. The connection is hardly 2 minutes. In addition, it is not navigate beyond my home page. After troubleshooting the result came as Ethernet is not a valid ip address configuration. It makes me really frustrated. After all, I was looking forward to navigate in windows 8, this problem makes me think really bad. If someone could help me, it will be grateful to you.

  Manorajan respected,

  I too had d same problem but I solved it later on myself.
  Here's how to: -.
  1-make sure you have intel network driver I installed your windows it pc. Download (on any other pc and transfer and install in it) and install it in your pc respective windows 8. Here is the link to download:-http://drivers.softpedia.com/get/NETWORK-CARD/INTEL/Intel-Network-Adapter-Driver-172-for-Windows-8.shtml
  Den DOWNLOAD realtek lan driver here to install http://drivers.softpedia.com/get/NETWORK-CARD/REALTEK/Intel-Realtek-LAN-Driver-80030730-for-Windows-8.shtml..if in the installation of theres no error ignore it... do not panic and reinstall... as it is already installed

  2 - unplug your LAN cable and Wi - Fi

  3 - go to network and sharing den center left side d click on change adapter settings clik left on the network card intel

  4-go to "Ethernet Adapter local area connection' properties and Deselect"Internet Protocol Version 6 (TCP/IPv6) "

  "5 - Select" ""Protocol Internet Version 4 (TCP/IPv4) '

  Press the properties button

  6 - Select "use the following IP address:" option and set this ips

  IP = "ip address".

  subnet mask = 255.255.255.0

  default gateway = your ip from the router (you can recheck all say on any other pc having a successful conection even wid tell by checking the properties of dial-up connection or any smart phone like any iphone or android mobile, if it is used as a wifi too in led staus/properties to your respective wifi name)

  7. in the second section select "use the following DNS server address:"

  Set "Server DNS PreferAlternate:" your router ip that entered u in "default gateway of" this. " pinterested ok and try to connect in wireless lan

• NDAS services stopped and do not work after installing Windows 8

  Ladies and gentlemen,

  My Services of NDAS stopped and do not work after installing Windows 8. This is necessary to run my SUNGOO LAN hard drive.

  Does sb know what to do?

  Best regards, Rolf

  Hello

  If I understand correctly the NDAS (Network Direct Attached Storage) service has stopped working after the installation of Windows 8. Is this correct?

  Please provide additional information for a better understanding of the issue.

  1 are you faced with the question of the NDAS service on the computer having the hard disk SUNGOO?

  2. how many computers using the hard disk on LAN?

  Specify the computers with Windows 8.

  3 are the computers in a home group?

  Please post the information requested to receive specific troubleshooting steps.

  Other links

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/NDAs-error-wont-see-drive-after-Win7-install/a004b2a3-9dd4-48a1-9ce7-c289931ba17b

  Why Windows is not find my device?

  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  I hope this helps.

• HP Solution Center does not work after installing Windows 10.

  After 10 Windows Installer, Solution Center HP, which is part of the installation of software for my HP Officejet 4500 510nz, tells me that the software is incomplete. The installation disc does not open, so I downloaded the HP program and re-installed. I always get the message that the software is incomplete. HP says they no longer support this printer (bought 24/05/14 - May 25/09/13!) - WOW! ~ printer still print, but will not run the other functions such as scanning, etc., because the HP Solution Center does not start, and HP has abandoned in favor of their product.

  Now what? Should I buy a new printer to replace this year 1 old HP so I can use its features with W10?

  Or, is there a way to fix it?

  This thread has been locked, for more information on HPPIW, please refer to the following support document:

  http://support.HP.com/us-en/document/c02681060

  HP printer Installation Wizard is an application of HP support that helped to download printer software. This support request is no longer supported by HP. This software was last updated was September 22, 2015.

  To download and install the latest version of the software for your HP printer, please visit 123.hp.comor HP support Web site, HP Support Assistant (in English).

• Satellite Pro U200 - no sound after installing Windows 7

  Hello

  I have a problem with sound after installing Windows 7 on a (PLUA1E) satellite Pro U200. No Win7 audio driver available on the Nordic pilot site. Help, please.

  G.Magnason

  Hey Buddy,

  Have you already checked the site Web of Toshiba itself?
  http://EU.computers.Toshiba-Europe.com

  I found a driver for Vista 32 bit and Vista drivers most also work on Windows 7 so it s worth a try! :)

• HP pavilion zv5000: missing zv5000 system drivers of base after installing windows 7

  After installing windows 7 displays device management point exclaimation

  Hardware ID:

  PCI\VEN_104C & DEV_8201 & SUBSYS_006B103C & REV_01
  PCI\VEN_104C & DEV_8201 & SUBSYS_006B103C
  PCI\VEN_104C & DEV_8201 & CC_088000
  PCI\VEN_104C & DEV_8201 & CC_0880

  Also CD-ROM/DVD-rom won't recognize my cd/DVD, but Device Manager shows the work of the unit.

  Need help

  Hello:

  You can use the driver card reader XP support for your laptop and driver page.

  There is no vista or W7 driver for this card reader.

  If auto installation does not work, manually install the driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-29677-1 & CC = US & DLC = in & LC = on & os = 228 & Product = 385148 & sw_lang =