After system recovery driver problems

Similar Questions

• Cannot install Office97pro after system recovery using windows XP. System does not seem to recognize the drive.

  After system recovery cannot reinstall dvd office97pro. It seems that windows XP does not recognize the program on the disk.  Tested the dvd on my computer laptop windows 7, charges fine. Help!

  Hi Fred Chandler,.

  1. What happens when you insert the DVD in the drive?
  2. You receive an error message?
  3. You are able to use the other DVDs on the computer?
  4. Do you have any third-party DVD burning software installed on the computer?

  If you are facing a similar problem with all DVDs on the computer, refer to the article below and then try the steps mentioned, check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  If you face this problem with the Office 97 DVD then I would suggest that you post your request in the forums of Microsoft Office.

  http://answers.Microsoft.com/en-us/Office/Forum

• How can I recover the Photoshop 8 after system recovery? [was: bkupa]

  How can I recover the Photoshop 8 after system recovery

  Reinstall it properly:

  Direct download links for Adobe software

  Mylenium

• Problems installing software hp after system recovery system

  I just replaced the motherboard due to the failure in an hp g60. I tried using the recovery of the system since the partition and the computer reboots after about 20 seconds in the hp software installation process. Then the system recovery screen would jump upward to want to me again the whole process. After 3 times to do, I did a scan of seatools hard disk and it tested ok. Then I thought that maybe there was a file corrupted on the partition, so I ordered the hp recovery discs. I ran these discs today and I got almost 3 quarters thanks to the installation of the hp software when a screen poped and told him to end the windows session and the computer restarted again. When he started upward, poped system recovery window back up and asked me to do it again. I'm looking for any help/suggestions on this subject. Thank you.

  Hello

  This could be the problem as HP recovery disks check for a "tattoo" on the bios to make sure that the operating system is installed on the machine, that it was intended.  One way to confirm this would be to install an OS on a retail disc - even if you don't activate - just to see if this will load ok.

  Best wishes

  DP - K

• can not update xp or IE after system recovery

  I did a system restore on my computer XP 32 bit. I have not checked to see if he had 1 SP installed, but I had a disc for SP 2 and manually installed SP 3.
  I can't install WIndows updates, due to the fact that I need of IE 7 or higher. IE 7 won't install because I guess he needs updates of some sort? How can I solve this problem?

  I tried to install Service Pack 1, but it wouldn't work because I installed SP 3.

  Thank you for your help

  4. after recovery, your office is always show files that were there before the recovery?

  Describe the very next step you take after you have completed the recovery. The files are still there, but some are missing such as 2007 Microsoft Office and other programs, but my documents are still there

  This means that is non-destructive recovery of Compaq and have without doubt both times. I would say that a re - install destructive is in order and follow my previous instructions that were for a clean install. Note that this will destroy the data so if your data is important you must save it first, ideally twice in two separate devices. If you are worried about data loss, I suggest putting in the hands of a professional, but do not expect to take any responsibility for your data. If someone is able, they may not cover all the possibilities (e.g., disk failure) and we your data must be your responsibility.

  In the light of your PC is one that may require the patch from HP/Compaq AMD I have revised my instructions for you below...

  Print what you want from this Web site that you can access on the PC hit after the new installation. After the installation you're using IE6 that this site does not work with!

  Get these downloads (click the link) and have them on a CD or a USB key (ignore warnings from Microsoft gives you need to be an IT pro or using Windows updates in place)

  SP2 (only if your recovery is a "no service pack at all" XP or is a Media Center XP)

  SP3 (only if your recovery is pre - SP3)

  AMD patch (only if your recovery is pre - SP3)

  IE8 (do not leave Microsoft direct you to a later version, IE8 is as good as it gets for XP)

  Make sure you have your antivirus solutions and handy greater security as (CD/download).

  • Back up your data
  • Disconnect from the internet (remove the cable Ethernet or a wireless device?)
  • Disconnect all devices except the screen, keyboard and mouse.
  • Make the new facility (the driver installation should not be necessary for a resumption of Compaq)
  • Remove Norton (use the deletion tool that rocks of XP has suggested)
  • Install SP2 (only if there is no service pack at all after the recovery, or it is XP Media Center)
  • Install the patch from HP/Compaq AMD (if recovery is pre - SP3)
  • Install SP3 (if recovery is pre - SP3)
  • Install IE8
  • Install antivirus/security
  • To connect to the internet
  • Update antivirus/security
  • Windows Update
  • Install remaining desired hardware/software
  • Restore your data

  Do not use Windows updates or driver "detectives" update/install drivers.

  Do not try to use Windows Update, until SP3 is installed.

  Do not install IE8 or any other software as long as you are at SP3.

  Make sure to use restore points in case something goes 'shaped pear.

  Tricky

• Disk system recovery creating problem

  I recently reformatted my Pavilion dv7, and then it prompted me to create a system recovery disk. When I first set up my computer I had problems with the third CD, so I think that I certainly should I redo. However, when I tried to create the system recovery after reformat the disk, I received the following error message: "this computer doesn't have a burning drive, which is required to create DVDs. Please contact HP support for assistance. »

  Obviously my computer has a burning drive, as I was able to burn DVDs in the past, and I know for a fact that this computer has even a Blu Ray burner! Can someone please? Thank you

  Bonhilda wrote:

  What do you mean try other media? I tried the DVD-Rs many times and after many attempts created CD 1 of 3, but after many attempts could not create disc 2. Then, just today I tried to put the DVD + R in the drive and nothing happened and he would not allow me to click Next!

  "he had successfully created disk 1 (with the help of DVD - R)

  I would call HP and ask a set free since you can not make your own game on the PC.

  Dial the 1-(800) - 474-6836

• RESULTS OF THE PRINTER ARE NOT READABLE AFTER SYSTEM RECOVERY

  HP Pavilion p6740f desktop computer. Windows 7 Home Premium 64-bit.

  PhotoSmart HP 6510

  After a system recovery recent everything works, except the printer does print to look like giberash.  Here's a sample:

  HN #$ () (1 + 29LYI

  Although the documents look good on the monitor, they print it.  It doesn't matter if the document is on Wordpad, Notepad, Word or PDF.

  Please tell me what is the problem, Joe

  I just use a program called REIMAGE to repair the files.  It worked very well, found the bad files and delete them and replaced the files with the new ones.  The printer works fine now.  REIMAGE is a great program!

• going, I'll be able to use the factory restore after hiding recovery drive Q?

  Hello world!!

  I recently bought E420 and I have restored factory settings once. Since then, the drive of Lenovo_recovery (Q) become visible in my exploring. Given that others also use this system, which anyone can mess with the recovery disk. I like to retrieve from the hard drive as its fast and easy so. I really never wanted to lose that drive. I tried to hide it

  I found this article on the Lenovo support site http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-71742 (see). I followed the steps. There were LenovoQDrivie.exe such file in my recovery disk so I download the Lenovo_hide_Drive_Q.exe and run that. After that my drive is not viisble in my exploring. I checked it the diskmanagement (make a right click my computer-gale-diskmanagement) here I can see the drive letter has been removed from this disk and see the car now, 100% free space... How can happen? is it just hidden? or I deleted the recovery because the article is for vista and other series of thinkpad? Please answer.

  I'm not currently check my system by running the factory as my system restore works very well and I have installed various related work in software.

  To check I pressed on enter at the beginning and after that I pressed F11 as flashed on screen and I could see display (Lenovo recovery screen after putting a password) which gives various restoration system - as option, command, prompt recovery of start and end of factory default restore. I don't want to take the risk I have no restore selected at the start of the factory and restarted. Defragment in window as I see this player with fragmentation of 3%.

  I just want to ask wheather my Lenovo_Drive is safe and I'll be able to use it to restore my system to factory default in the future? I don't want to try it now that the system is working fine and I don't want to take any chances.  In diskpart also I have lenovo dirve as partition 3 that is hidden. As I said could reach the screen giving 'restore defaults' opition, go, I'll be able to use this option in the future?

  Called the hotline, that they were not able to answer...

  I will be grateful if someone can help me...

  Thank you

  
  

  Hi Alexander,.

  Windows 7 recovery would erase the disk and put 7 on the entire disc.  So, you don't want that.  I didn't know you already burned disks.  It's good that you did.

  If you really want to test it, you could make a backup of the current system on external media, (such as a hard drive), and then run the recovery and restoration of the backup.  If it works, then you know recovery is correct.  If it isn't, then you could boot from the recovery discs you've done and restore it from your current backup.

  If you do not want to take the chance to test it, then at least you know that with restore disks and backup to external media that you can restore the system to its current state, no matter what happens.

  Dave

• Windows calendar entries lost after system recovery

  Yesterday, I had to do a full system recovery.  That in itself is not really a problem because I do a backup on a regular basis, and all the files have been restored, outside my Windows calendar entries.  I would have thought that they would be backed up with everything else.

  The beckup settings are standard Windows backup settings.

  If anyone has an idea where they can be restored from, it would be a great help.

  Thahaseena thanks for your advice.  Unfortunately, the ics. file doesn't seem to be in windows backup, but I found a way to include this in the future.  I showed the steps for others who may encounter the same problem:

  Click on a space vacuum calendar > file > Export > make sure that the file name is [your name] calendar > choose a folder you know is saved (e.g. Documents/General > save)

  You should do whenever you perform some new entries, but this as an operation 'save', and export default to the location you have chosen, making it even faster.

  The ics.file then I hope that automatically backs up your external storage next time you perform a backup.

  Di.

• Installation of Windows Mail after system recovery

  Hello. I need help to set up Windows Mail after a system recovery. I have Vista Home premium. My ISP is Comcast, so I have a Comcast email address. I did a full backup on an external HD before the resumption. I have not used Windows Mail since Jan. 27. Since then, I've been access my mail on the site Web of Comcast.

  I need to know the correct sequence of steps to set up Windows mail. Is it to drag the contents of the folder from my outside to my computer? Do I need to configure the info from the first acct (pop etc.) before you transfer the contents of the folder? I want all my old mail book and the address in the new configuration. These seem to be backed up on my external.

  Also once I'm set up should I expect to see all letters sent since Jan. 27? I don't mind what happens. I just want to know what to expect.

  Thanks in advance for your help

  First, set up your account in Windows Mail.   If you want messages that you see in Windows Mail to remain available in Comcast web messaging, configure the account to leave messages on the server. When you click send/receive , it will download all of the messages that are stored on your Comcast email server.

  To import your old messages in Windows Mail, press ALT + F , click on import > Messages > Microsoft Windows Mail 7 > Next , find the mail backup folder and follow the instructions.  The old post will go into a folder called folder imported , and you can move it to other records there if you wish.

  By default, Windows Mail saves its messages in C:\Users\\AppData\Local\Microsoft\Windows Mail.  AppData is a hidden, so turn on the display of the hidden files and folders first.

  To import your contacts, copy them to the contacts saved to the new folder.  By default, Windows Vista stores contacts in C:\Users\\Contacts.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• where can I find the original trunk after system recovery

  I made a recvry of the system. I need to add the boot in the file.i start looked in c for the boot drive. I found it c/boot. so I added it to the to the the file start and rebooted. is that correct?

  also, I want theoriginal BIOS F.1B for MY LAPTOP - HP PAVILION DV7 - LM726AV.  WHERE TO FIND IT?

  THX.  KRIS.

  May depend on exactly what you mean by the system recovery

  I don't know what you're trying to achieve with 'boot' or what exactly you mean

  You can find drivers for your laptop from HP support specific to your model, you should be aware that bad update/modify the Bios can cause a dead PC

  BIOS F.1B is the bios updated the original was F.13

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5112006#N1749

• Relocation of the PS CC trial after system recovery

  I have installed PS CC trial December 21, 2013. After a recovery system PS disappeared. I find no way to reinstall it at the time of the open trial.

  Run creative cloud cleaning tool , and reinstall.

  Mylenium

• Cannot find my cd/dvd drive in windows Vista after system recovery

  I tried all the everything in this forum that I found, but I still can't my dvd player to show up anywhere there was here a few days and I had to perform a full recovery of the system and now its does not can someone please give me some ideas so I can use my dvd again drive?

  I have more upper and lower filters

  I am running sp2 and fixit program isn't helping me

  I have a HP Pavilion 9700US

  Hello

  Check with HP Support, their online documentation and drivers, and their known forums
  questions.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ----------------------------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Extremely slow/unnecessary Windows Update after system recovery.

  Hello

  While trying to help a friend with her laptop, I encountered a small problem, which seems quite unique. After searching the ' net and the Knowledge Base, I'm about as clued in as when I started, that is to say not very.

  Machine: Satellite 1800 412 (Danish).

  DID: Restore the system to zero back to XP SP1a (NSP).

  Problem: After a complete system via the original recovery CD restore, Windows Update is running * extremely * slowly, or not at all, once it gets to the point where it scans for updates you need. So far, I've managed to get 1 downloaded an update, a little. As an update is attempted usage of the processor reaches a maximum at 100% and stay there until I abandon and hard restarts, since the machine is now almost useless and lazy point appear frozen.

  Tried to: applied manually different updates downloaded directly from Microsoft, such as Internet Explorer 6 sp1, XP SP2 (DK), various updates and patches for XP downloaded and checked/tried to reinstall the drivers of Toshiba (they are updated). Verify that the systems boots properly with all recognized devices. Check the system clock. Searched the Toshiba KB, searched the Internet, searched the Toshiba support forum. Pulls hair in desperation. I have to have restored the system 4times intant to try different ways of patching the system with updates.

  Special features: It is apparently * only * updated Windows, what causes this problem, and that after the first few, where he updates the Windows Update engine in Internet Explorer. Before that I'm trying to update the machine apparently functioning normally. I can surf, download, install and run programs and what not. (No, I did not visit suspicious websites.) If Windows Update runs automatically in the background / 'in the status bar', the same thing is happening: Machine suddenly becomes useless and stays that way.

  The machine is on a local network behind one bulletproof OpenBSD firewall, no other Windows machines inside, so there is no chance of a quick infection of the network at the origin of the problem.

  Unfortunately: Manually download and apply the patches aren't an option I want to activate the automatic updates before you return the machine back to its owner.

  Hope some of you might have an answer to this one, because I have never known or heard of something similar before.

  Frank.

  Hello

  There may be a possible for your problem. An attempt is an Installation from CD XP Win and New Installation of the tool of Toshiba s. check that the activity of process is that s OK, made a driver update and an update of the Bios on the side download Toshiba. http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  I hope this is a help to your problem.

  By

• Satellite L550 - 13 c - can't configure Windows after system recovery

  After using the windows recovery discs, I get the message,
  + Can not configure windows to run on this computer hardware. +

  I changed the hard drive in the past, and after that reinstalled the software with the same disk without problem. But now it does not.

  Any advice?

  Best regards, HAns

  Have you used the new HARD drive with the same size?

  Probably the image of Toshiba is unable to configure the system due to the size of the HARD drive.
  But to be honest: the size of the HARD drive should not be a problem and so it's just a guess

  However, the fact is that the Toshiba Recovery disk would fix the laptop back to factory settings. This means that even the new HARD disk should be partitioned and the same partitions can be created on the new HARD drive.

  You could overcome this procedure using a Microsoft Windows installation disc.
  Of course the Toshiba drivers must be downloaded separately from the Toshiba page and installed after the installation of the Windows System.