After that recommended upgrade Thunderbird no longer seems to work.

Similar Questions

• After that the upgrade of my URL bar no longer displays the Protocol.

  After that the upgrade to Firefox 7.0 my URL bar is no longer shows me what protocol is used when you use http port 80. How can I turn this feature on?

  The Protocol (http://) was removed from the URL in the location bar for pages http:// only. https:// pages will always have the Protocol. This can be confusing for some users. There is also a bug known, where if you copy the URL after selection of the awesome bar dropdown (but before loading the page) it does not include the http:// part.

  Users can revert to the old behavior by setting browser.urlbar.trimURLs to false in about: config

  1. type of topic: config in the URL/address bar and press the Enter key
  2. If you see a cautionary, accept it (promise to be careful)
  3. Filter = browser.urlbar.trimURLs
  4. Double-click the pref in the lower panel of toggle it on 'false' OR , do a right-click on the pref in the lower panel, then choose "Toggle" switch it on "false."
  5. close the topic: config tab

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• After that the upgrade of os josemite cs4 applications will not work. Message that I need to install the legacy java SE 6 runtime. Is it necessary to set the loading application?

  After that the upgrade of os josemite cs4 applications will not work. Message that I need to install the legacy java SE 6 runtime. Is it necessary to set the loading application?

  Found the answer:

  Java for OS X 2014-001 includes improvements to the installation and replaces all previous versions of Java for OS X. This package installs the same version of Java 6 included in Java for OS X 2013-005.

  installed above and it works now

  Blessings

• How can I feel Dreamweaver files / printing no longer seems to work on MAc

  How can I feel Dreamweaver files / printing no longer seems to work on MAc

  Code print function has been removed from the PCOC (not exactly why).

  You can help bring back by submitting a request here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

• RealPlayer download videos after that I upgraded to Firefox 12

  After that I've upgraded to Firefox 12.0, arrested RealPlayer video download. Firefox is not yet in the RealPlayer preferences box. I prefer Firefox, but do not know what to do.

  Hi texasbill,

  You should take a look at this thread: https://support.mozilla.org/en-US/questions/707460

  It seems that the problem might be related to the update of Adobe.

  This message should help you get back operational:

  «I did the following: open Realplayer, press menu drop-down and select 'Préférences' select "Download and save", and then uncheck the box and again check the option 'Activate the record button' and then 'OK' to exit the "Preference".» After restarting the browser, the download video button will go out again. Need to update Adobe Flash changed some configurations in the browser and the Realplayer need to re - configure again. I use version of the Realplayer Taiwan, therefore element names are translated into English, may be slightly different with what you see. "

• lost all my colors and stacks of custom font I place after that I upgraded to 20141 is this normal

  lost all my colors and custom font stacks that I place after I've upgraded to 20141 it is normal and this will happen whenever I update.

  Hi mi32dogs,

  The October release is a new version completely and not and update to the previous version. As the colors and custom fonts are not migrated, you don't see them.

  It won't happen if you update to an existing version.

  Thank you!

  Kusha

• HP Envy: No sound system after that I upgraded to window 10 and reset my laptop (HP envy)

  Hello

  I don't have any audio system after that I have reset my laptop and restored my personal files.  In the computer system, it showed that I have not IDT High Definition Audio CODEC cannot install or find the driver software online (with a yellow sign).  Can you please give me a solution to fix and if not on IDT, please provide me with any other information to fix it.

  Here are my product information

  HP envy window 10 (updated)

  Processor: AMD A10 - 5750 M APU with graphics HD Radeon (TM) 2.50 GHz

  Installed memory (RAM live): 12.0 GB (11.2 GBusable)

  Type of system: operating system 64-bit, x 64-based processor

  Pen and touch: Support full touch Windows with 10 Points of contact

  I hope this information helps you understand what wrong with my sound system.

  Thank you!

  Hello:

  Please see if this audio driver works.  He says it's for W8.1 and W10.

  This package contains the driver that allows to the Audio IDTHigh-definition (HD) in models of laptops that arerunning an operating system supported.

  File name: sp63555.exe

• After that my virus clean my printer does not work I have windows xp and my printer Deskjet F 300 said

  After that a virus clean my printer HP Deskjet F 300 quit working they installed Windows XP from Windows 2000 and I can't make it work help

  "they have installed?  You had somebody "clean" your computer and they have also installed Windows XP (you used to have Windows 2000)?

  The first thing you need to do is to determine if 'they' a legitimate version of Windows XP installed.  Download and run the MGADiag tool.  If the tool does not report that Windows is "genuine", take back it the computer and demand that 'they' install an authentic version, paid Windows XP.  While they are at it, tell them to install a driver for your HP Deskjet F300.

  If you do not have a genuine version of Windows XP, then go to this page: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=1128298
  You have several choices to this page.

  • The top line, which only says: 'Pilot' is the complete set of software including software HP's Photosmart printer drivers and the scanner of your Deskjet.  As the HP notes, this is a very large download, so if you want this package, you must have a high-speed Internet connection or order the CD.
  • The second line, which says "Driver - Product Installation software" includes the basic print and scan drivers.  HP has said, "not all product features are supported with this installation package."  I don't know what "features" are not supported if you choose this option.
  • It should not necessary the "Patch" because or the other of the first two downloads is dated after the patch and so should be included.  After things are installed, you can download and install the most recent of the 3 "Updates".

  When you wrote that the printer "will not work" after a new installation of Windows XP, I assume that the printer is not installed at all.  Just in case, however, previously, you use the package that you download from HP, follow the instructions here to clean all traces of a failed attempt to install it.  (Note: remember "Step 4".)  "Step 6" refers to the directions outlined in the upper part of this post.)

• The xbox 360 Media Player no longer plays music after that I upgraded my CPU. Error message: media sharing service has been terminated

  Original title: the xbox 360 Media Player plays more music after I upgraded my CPU

  I have Vista 64 SP2.  The service runs for 5 seconds and then I get the message that she stopped. He was works well for years (my Xbox 360 sharing), I'm guessing he stopped a few weeks ago after I put in a slightly faster processor. I watched a some tech posted and tried to run the program which seeks the corrupted system files, but the only files that it could not pay had to do with the sidebar Windows. I have removed and put back my media extender, I thought that it worked because I've seen (from my xbox) miniature images, videos and music counting upward, as they have been added and I could see them. But if I take one he freezes for a few seconds and then says the media sharing service took end (or something like that). Then, I go to my PC and see that it stops. I can restart, but it only lasts for 5 to 10 seconds.

  I also say a post about deleting files in C:\Program Data\Microsoft\DRM, but I have all the files in there. Just a server folder empty.

  Hello

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. Click Start.
  (b) in the search box type eventvwr.msc, and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

• After that recommended BIOS upgraded satellite a series does not start

  During the recommended BIOS Flash upgrade of the system came in suspended state.
  I waited 1 h before trying to restart the laptop, I had to do with force by removing the battery.
  Now the system does not even show the bios screen. Is there a way to fix this problem?

  Hi Tom

  Obviously something went wrong with the BIOS update and now BIOS is damaged.
  I'm afraid there is nothing you can do except to authorized more close contact and ask for help.

  I'm sorry. :(

• After that mx7 upgrade to 8 virtual directory cannot connect to Jrun server

  
  Updated to a windows server 2003 CFMX 7, with updates, to CF8.01.
  The site works properly with the exception of a virtual directory that points to a directory that comes out of the path of the iis Web site. I can connect to the virtual directory with html and I work around this problem in this way.
  
  The error message is: error the server encountered an internal error and could not respond to your request.
  Could not connect to the JRun server.
  
  I don't see any problems when I looked in the newspapers of CF, but maybe it's that I don't recognize the problem in newspapers.
  
  The virtual directory and cfmx7 have had no problems, but after the upgrade, just the error message when you try to join a .cfm.
  
  I installed CF8 in the root of the web as cfmx7, and migration deferred all parameters. I did go into services and stop all services cfmx7 and put them in the manual.
  
  
  I have attached the server.log.
  
  Thanks for any help on this.

  Looks like it was a combination of upgrading, increased use of the ASP files and not having not separate application pools in IIS.

  We have recently began just edding aspx apps, previously we had only an asp application so we only used the application by default. icaton pool in iis. Errors in the virtual directory has begun, we have deleted and redone the VD with the application pool is unique. This seems to have solved the problems. The only concern I have is one of the VFD had its own application pool and was still very slow response after the upgrade. But I'll see how this solution works for the future.

  The decision was made to have only installed cf8 since that worked well on our test server, so they did not crush the CFIDE folder.

  Please check this point and for your time on this.

  At this point, I consider this closed. If something happens, I'll start a new thread about this.

• Why MSN Messenger will not charge my e-mail after that I upgraded to 13.0

  I'm used to be able to use MSN Messenger from my Inbox very well until firefox put to 13.0 update I have no why, but now it will not load. It works very well on Internet Explorer, but not firefox after I upgraded and I don't want to use internet explore so if someone can help I would appreciate it a lot, any help is welcome. Thank you.

  There is a bug with MSN Messenger, caused by the use of globalStorage longer supported in Firefox 13 +.
  Hotmail support has been notified on this issue and is working on a fix.

  • bug 762170 - Windows Messenger does not load in hotmail.com

  (Please, don't comment in bug reports)

• Windows 7 has become "not a copy genuine windows 7" after that I upgraded to 10 and downgraded to 7.

  I bought my HP Pavilion windows 7 Tiger pawn in Columbia, Missouri in 2013. I have upgraded to windows 10 in 2015 or 2016 at first (without free of Microsoft Update), didn't like it not and downgraded to 7. Since then there has been a "not a copy genuine windows 7" displayed in the lower corner to Rt. After I responded to solve it 'now' I did know that I have to pay for the downgrade. I found the product key # by 'JellyBean' but it wouldn't work. I contacted Microsoft who sent me to HP that stated that this laptop was made in Middle East and could not help me. (The keyboard is equipped for English and Iranian, I think. I cannot download IE and can't find answers from Microsoft because apparently I don't have a genuine copy of Windows 7! Heck, this computer hp pavillion laptop has windows 7 when I bought it! I even called Tiger pawn and they told me that it was purchased without the installation disk. Help! At the start, I always have this horrible "DNSunlocker" virus/malware.

  Hello Sharon,

  To remove this DNSunlocker, please follow the steps posted by ball the on this link.

  Kind regards.

• Photoshop does not open after that I upgraded my Windows 10 PC a few months ago and now it won't let me reinstall.

  Before updating my computer, Photoshop and elements 13 first works. After update from my computer, I need to click on the desktop app to open Photoshop and I would get the hourglass for a few seconds before disappearing, and that's all. I tried to see if the link was broken, but no dice. It simply doesn't get it. This seemed strange because Premiere Elements works. Since then, I tried my hand at several solutions that have failed. I tried to uninstall it and all Adobe related (including the Premiere Elements) to reinstall all programs after. Now, it won't let me install anything either and says "installation has encountered any errors. I also tried to install Premiere Elements which just won't even run. Help, please!

  Run the cleaner, http://www.adobe.com/support/contact/cscleanertool.html

  Restart your computer and run the Setup again.

  If this fails, troubleshooting installation problems with the log files. CS5, CS5.5, CS6

• After that RAM CS6 effects preview now seems to be broken after update 11.0.2.12

  Updated for the latest patch for AE CS6 11.0.2.12.

  When I hit preview RAM, my hair just After Effects upwards, or has a huge (minutes) if I have enabled heart-rending multiprocessor. Info said he's working on the background process.

  In fact, if I'm using Trapcode Form and particular and multiprocessor power it tends to crash. Since the upgrade to the version that I can't even make the beginning of a particular scene.

  Everyone is having a problem with this? I tried on a different workstation at the office and it does exactly the same thing.

  My computer is a HP Workstation Z800, Windows 7 64 bit, 18 GB of Ram, Xeon [email protected] and Nvidia Quadro 5000.

  Yes. When using particular 2.1 I find that if I have MP on it takes forever to set up the process. Exit the MP mode at this time, it is difficult but possible. Once the MP turned off everything makes it big.

  I have no other problem with all operations subsequently CS6.

  This happens on a HP Z820 with all the current software/drivers.