After that set Firefox to update my version to 33, the application is launched in a black screen. I tried to uninstall/reinstallating. Can't see menus or anything!

Noted in other messages asking users to start Firefox in safe mode, but since I do not see the menu...

Use the SHIFT key when opening Firefox, disabled hardware acceleration, looks like I'm back in action. Thank you, Philipp!

Tags: Firefox

Similar Questions

  • Satellite L - after that set BIOS to update the screen is black

    Hello

    I made an update of the BIOS on my Windows 7 64 bit, then the OS get frozen. After I restarted the laptop, ago just black and nothing appears on the laptop.

    What can I do?

    > What can I do?
    Time for boyfriend to ASP.

    It seems your BIOS did not complete successfully and the ROM module where the BIOS is stored has been damaged or has been flashed properly.

  • Equium A210 - after that set BIOS to update the DVD player has stopped working

    Hi, since I have recently updated my BIOS, my DVD drive has stopped working on my Equium A210-1AS with Vista 32 bit.

    I tried the program fixme Microsoft who does not work, upper and lower register isn't here ether in regedit.
    Someone at - it solutions for getting the DVD drive working again?

    Thank you

    Hello!

    The CD/DVD drive is listed in Device Manager? You see an error code?
    If the drive is listed in Device Manager, you should try to remove it, and then restart the laptop.

    Try to load the default settings in the BIOS.

    Have you tried to remove the upper and lower filters by yourself? Here is the solution from Microsoft:
    http://support.Microsoft.com/kb/314060

    Good bye

  • After that 'stop and install updates' on restart it happens to "configuration" 3/3 then restarts then does "configuration 3/3" again and restarts in a loop ""»

    This is windows vista business.

    After that 'stop and install updates' on restart it happens to "configuration" 3/3 then restarts then does "configuration 3/3" again and restarts in a loop. ""» I tried to find out latest fashion good and safe, but still the same. Help, please.
    Is it possible from a different drive to boot and then by applying some changes that would stop it. At the time when the computer is unusable, it just starts to "configuration updated 3/3" then restarts.

    Hello

    Try these methods.

    Method 1:

    You have to do a cold start, press and hold power for a few seconds (10).

    Wait a minute or two and turn it back on.

    Make sure that "all the" non-essential devices are disconnected. (USB keys (for example, flash drives) or any other external media like this takes place.).

    If you can, start safe mode.

    Start your computer in safe mode with network.

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    NOTE: see 3 from the link above, Advanced options boot (including safe mode).

    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

    Select Mode safe mode with networking.

    Method 2:

    Use the system restore feature:

    (a) click Start, type system restore in the Search box or search programs and filesand then click on the system restore under the programs section.

    (b) on the System Restore page, click Next.

    (c) select a restore point during which you know the operating system works, and then click Next.

    The restore point should be a date that precedes the first time you encountered the problem.

    NOTE: If you use system restore when the computer is in safe mode, you can't undo the restore operation.

    See also: error: configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer when you try to install updates for Windows

    http://support.Microsoft.com/kb/949358

    Data loss caveat:

    Be sure to back up data that you want to keep before you begin. This is to ensure that there is no loss of data.

    Method 3:

    Step 1:

    To avoid this problem on Windows Vista, obtain and install update 937287 from the Microsoft Download Center separately from all other updates on Windows Update site. Install the update that applies to your version of Windows Vista so that you are able to install future updates.

    A software update is available for the Windows Vista installation software feature

    http://support.Microsoft.com/kb/937287/en-us

    The following files are available for download from the Microsoft Download Center:

    Windows Vista x 86 systems

    http://www.Microsoft.com/download/en/details.aspx?amp;displaylang=en&ID=15287

    Windows Vista x 64 systems

    http://www.Microsoft.com/download/en/details.aspx?amp;displaylang=en&ID=23732

    Step 2:

    Save the update to a location on your hard drive, you can find and then install the update from there.

    Download, *Save* and install the update with no security (antivirus/security suite) software installed, disconnect from the Internet, disable the firewall & close all non-essential processes in the Task Manager.

    Disable antivirus programs and firewalls.

    Disable the anti-virus software

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Windows Firewall

    http://Windows.Microsoft.com/en-us/Windows-Vista/firewall-frequently-asked-questions

    Note: Make sure that you enable the antivirus software, other security and firewall after the test programs.

    Caution:
    Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    I also recommend taking off of USB keys (for example, flash drives) or any other external media, as this takes place.

    When the file is downloaded, see these steps.

    (a) right -click on the file and

    (b) select run as administrator from the menu.

    Check if it helps.

  • Firefox tries to update my version 8.0 to version 9.0.1. I'm not willing to do because the Norton Toolbar is not yet compatible with the new version of Firefox. How can I get firefox to stop trying to update each time I open the application?

    Question
    Firefox tries to update my version 8.0 to version 9.0.1. I'm not willing to do because the Norton Toolbar is not yet compatible with the new version of Firefox. How can I get firefox to stop trying to update each time I open the application?

    Firefox 9 is Compatible with Norton 2011, 2012, 360 v5. See:

  • Receive the error message after that firewall creative cloud update changes to our network.

    Receive the error message after that firewall creative cloud update changes to our network.

    We have a user, who tries to update through the creative application of cloud.  We tried to find what is blocked but have met a dead end.

    When the cloud creative software attempts to shout that we see a connection attempt https://ops:443 / ims/token/v1

    I did some research and the only reference to the IMS for Adobe, I could find was the IMSService.  This seems to be an authentication service.  The problem is that "ops" are not a valid domain.

    This issue seems to only affect the Creative Software of clouds as I was able to update a test computer with Creative Cloud via Adobe Application Manager.

    The user's system and our test system are running OS X Yosemite

    Hello

    Can you please check is below the links with white combination ports on your firewall. Adobe creative cloud desktop application uses these ports only.

    Address Ports
    ccmdls.Adobe.com 443
    IMS - na1.adobelogin.com 80 443
    IMS - prod06.adobelogin.com 443
    na1r.Services.Adobe.com 80 443
    prod-rel-ffc - ccm.oobesaas.adobe.com 443
    prod-rel - ffc.oobesaas.adobe.com 443
    LM.licenses.adobe.com 80 443
    ccmdl.Adobe.com 80
    swupmf.Adobe.com 80
    swupdl.Adobe.com 80
    ACP.adobeoobe.com

    443
    interaction.Adobe.com

    443

    Thank you

    Ashish

  • Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not. Please help.

    Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not.  Help, please. It has been stable over the years and now it will not work. I get no help when I diagnoise of problems, but I never. It has been checked and rechecked. PitStop does not even recognize a problem. I could change the homepage, but I prefer to use Google if it works. Frustrating.

    You may need to update your toolbar, google has made some changes just about everything and possibly that the page is not where it used to be.

  • After that I have enter my serial code # and select the location in which to install Lightroom, I click on install.  Windows asks if I want to leave, I say Yes.  Then it starts installing but quickly gives a screen Installation failed

    After that I have enter my serial code # and select the location in which to install Lightroom, I click on install.  Windows asks if I want to leave, I say Yes.  Then it starts installation but quickly gives a failed Installation display The error summary of files gives me no information.  Any ideas?

    Thank you, but I thought about it.  I have to select "Run as Administrator" on the installer so that it works correctly on Windows 8 Pro.  FYI just when it happens again.

  • My commputer won't allow updates. When I try the blue bar just continues to run. I tried to run Powershell, but it stops and says error has occurred.

    Original title: Powershell

    My commputer won't allow updates.  When I try the blue bar just continues to run.  I tried to run Powershell, but it stops and says error has occurred.  What should I do

    Hello

    1 - what you mean that you can not install Windows Update? If Yes, then the updates?

    2 are. what Powershell you referring?

    3. you receive an error message? If so, then post back the exact error message.

    Answering these questions that could help us help you better. The following article could be useful if you are referring to the Windows updates.

    Problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  • I'm following the steps described in the version beta to build the application of 'Launch' test, but the tool of signed digital app has no ios tab when I go to the for use. Is this a bug or am I missing something?

    I'm following the steps described in the version beta to build the application of 'Launch' test, but the tool of signed digital app has no ios tab when I go to the for use. Is this a bug or am I missing something?

    Note that iOS signature is only available on Mac. If you're on a Windows machine, you won't see the iOS tab.

    Neil

  • Get an error message when turning on the computer, then just get a black screen after the message saying cannont find script file c:/windows/run.vbs

    Original title: windows does not

    I have windows 7 and get an error message when turning on the computer, then just get a black screen after the message say cannont find script file c:/windows/run.vbs

    What can I do?

    Enter your bios usually with keys F2 or delete to the first powered

    Use default Optimize can be the F5 key and save and exit,

    Insert your installation disc or flash media and press F8 or F12 to boot on it

    Then use the recovery tools to run the Startup Repair tool.

    http://Windows.Microsoft.com/en-us/Windows/Startup-Repair-FAQ#1TC=Windows-7

  • Creative Cloud Desktop said that there is a download error when I open the applications tab. I tried the button Reload Applications with no luck. Any ideas?

    Creative Cloud Desktop said that there is a download error when I open the applications tab. I tried the button Reload Applications with no luck. Any ideas?

    John has provided all of the above resolution, could follow please this new https://helpx.adobe.com/creative-cloud/kb/Download-error-apps-tab.html

    In the case where you do not succeed please contact support.

    Concerning

    Stéphane

  • How to display the version number of the application and the date of the last

    At the Express request User Guide under the heading "Application définition Attribute" description for the Version is as follows:

    Version includes the version number of the application on a page. You can also automatically link the version at the time of last modification by using the following format masks:

    YYYY. MR. DD

    MM DD. AAAA

    DD. MM. YYYY

    I have attempted to use various forms of alternative channels to display this information on a page without success, here are some of the things I've tried:
    and VERSION.
    and version.
    & APP_Version.

    And how would you present and the version number for the date of last modification date?

    Thanks for any help
    Ben

    The substitution of the #APP_VERSION model # seems to only be supported in Page header and footer definitions, not the body. (There are a number of restrictions where work substitutions, which are not well documented).

  • Unable to boot from USB or ODD after that windows 8.1 update on P850 - 31L

    Hello

    I just updated a P850 - 31L for windows windows 8.1 8 by the windows store.

    Before the update, I was able to boot from a USB key by pressing F12 during the boot upward.

    After the update I was more able to boot from the USB drive. Select the USB key by changing the boot order in the setup of the BIOS via F2 or pressing F12 is no longer works.

    Booting from ODD also is no longer possible.

    The version of the BIOS is 6.70 and does not secure boot must be disabled. However the DVD and the USB I tried are signed Ubuntu 12.10, who worked before the upgrade. Fastboot in windows 8.1 is disabled.

    Then, this seems to be a bug in the BIOS Toshiba? Or a windows 8.1 update the BIOS or the boot EFI in a way partition replace the BIOS setting? Really stuck here, does not seem to be much information.

    Any ideas or help would be very appreciated!

    Thank you

    Michael

    Update: I just tried to boot from the DVD of windows recovery 8 Toshiba and this does more or the other.

    Post edited by: michael_toshiba_forum

    OK I fixed that.

    First of all, it is to note that it is possible to turn off secure in the 6.70 BIOS startup.
    However this option is only available when the password is not defined in the Security menu.

    After activation or deactivation of the password a reboot is necessary to make the secure boot toggle option is available or not.

    It's good that I guess I assume that it can prevent secure boot are disabled when the machine is running. However this does not seem to have been associated with this problem.

    I selected the option "reset to factory defaults" in the output menu.
    The machine is then able to boot from USB and DVD. The boot order was also respected.

    Perhaps upgrading windows 8.1 corrupt invisible somehow the BIOS settings. Or maybe it was just a stranage coincidence that the BIOS itself corrupted during the installation. Anyway this factory reset fixed.

  • After that I got a update I have download problem

    When I got to other sites for downloading stuff now it takes a few minutes and then after that it says problem loading page

    Hello

    Please check if this happens in Safe Mode. Safe mode disables the installed Extensionsand themes (appearance) in (Alt + T) Tools > Add-ons. Hardware acceleration is also temporarily disabled - manual setting is Tools > Options > Advanced > general > use hardware acceleration when available. All these settings/options/additional custom modules can also be individually or collectively disabled/enabled/changed to normal mode of Firefox to check if an extension, theme, option or a hardware acceleration is causing issues. Deactivation/activation of hardware acceleration and some types of modules in normal mode may require a restart of Firefox.

    Uninstalling the modules

    Uninstalling toolbars

    Troubleshooting Extensions and themes

    Extensions of the issues

    Options

    If you have installed security software (antivirus, firewall etc.), you can try to delete any existing instances of Firefox and files associated with the configuration in all different areas/modules of the security software. Instead create new rules allow or trust for Firefox and associated processes. Even otherwise the security software can also ask again when Firefox is started and you may be able to allow/trust at this time. Please see this.

    The AV/Firewall configuration

Maybe you are looking for