After the database connection, can I not patch phsical standby db?

Similar Questions

• Windows 7 will not reconnect to the network wireless after the first connection.

  Hi, we have computers portable windows 7 on a corporate domain which primarily use a desktop lan connection. We have a user based certificate that is registered automatically through Group Policy, to allow wireless access, and another group strategy that puts in place the wireless itself.

  The question we have is: LAN/WLAN switch is enabled in the BIOS.

  User can start and open a session with or without the LAN cable and wireless connections automatically connects them (if no LAN cable not inserted) wireless access point

  Once connected (if started with inserted LAN cable), when the LAN cable is removed, the wireless connection will automatically connect AP (specified by Group Policy).

  If the user then taken LAN cable back in, (after returning from meetings etc...), it connects to the wired LAN fine.

  If the user removes the LAN cable once again, (another meeting etc.) the wireless connection is not automatically connect again.

  The user can open the connections wireless at this point and manually connect to the access point.

  The opposite occurs if the user starts with no LAN cable it inserts after the start and then he removes, the wireless connection does it not connect automatically.

  "Connect automatically when this network is in range" is enabled in group policy

  IPv6 is disabled on the wireless card

  I tried to delete the contents of the Interfaces file in the program data\microsoft\WLANSvc\profiles

  WLAN/LAN switching works fine every time.

  Anyone have any ideas?

  Thank you!!

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with the wireless connection that isn't automatically. That this computer is connected to a domain network, I would like to advice post you your query in the TechNet Forums.

  Forums TechNet for Windows 7
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Hope this information helps. Feel free to write us again for other queries.

• After the awakening of system does not see the sound card

  Hello

  I have a problem with the Hibernate. After the wake-up system do not see my card (creative sound N2 on USB key). I've been in touch with Creative and I know that I need to uninstall my laptop Realtek sound card in BIOS. Of course, I don't see any possibility in the BIOS. In Windows XP Home edition, can I uninstall this sound card, but after reboot this card is itself back installation.

  And I want to know how to completely disable Realtek.

  Hi Tomasz

  One question;
  You're talking about on a map of external sound that is connected via USB to the laptop or talk on the Realtek integrated sound card!

  I know a similar sound problem on Vista OS.
  I read in the knowledge base Microsoft on similar problems;

  Please check this:
  http://support.Microsoft.com/kb/929685/en-us

  Please provide more details if this fix will not help you!

• Web IR client server (0): database connection information is not available.

  Hello
  
  We have improved our system of Hyperion 9.3 to EMP 11.1.2.2. We use mainly the declarant a SQR production and interactive reporting tools.
  
  Using the workspace as an admin if I'm running a BQY everything works fine, but when I try to do the same as other users I get the error "Server (0): database connection information is not accessible." The treatment is off"of the
  
  I migrated everything form the old version and don't have anything since the changes. It looks like a configuration problem and I tried to look and compare all current production (old system 9.3).
  
  Is anyone else facing the same problem before? Any suggestions on the place to watch.
  
  Thank you in advance.

  Hello

  You have to go to my oracle support of website link: https://support.oracle.com/epmos/faces/MosIndex.jspx?_afrLoop=7929796452543&_afrWindowMode=0&_adf.ctrl-state=113hdvh7xd_4

  Connect with your oracle ID and the password that you have for your business and looking for the number of the document in the "search knowledge base" that will appear in the upper right of the page.

  Research shows the document you and you can access it.

  I hope this helps.

• I have a toshiba laptop purchased recently. After the scheduled updates it does not recognize the wireless network. I have to do a system restore. is there a solution for this problem?

  I have a toshiba laptop purchased recently.  After the scheduled updates it does not recognize the wireless network. I have to do a system restore.  is there a solution for this problem?

  Hello

  Make sure you have the latest network adapter drivers fron toshiba

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  and if windows update is at the origin of the problem change how to get updates to uncover the problem update

  When you have found the issue, a right click on it then invited uac then hide

  read the information on the link below

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• Windows 7 "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is enabled and running. »

  Get the message "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is enabled and running. "I am NOT able to connect to the internet please help. I use Windows 7 OS

  Hi Odile,

  Thanks for posting your question in the Microsoft Community forum.

  It seems that you have a problem with the connection to the Internet and receive the error message "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is active and running".

  
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  I may need a few more details to better understand the issue.
  1. did you of recent changes on the computer before this problem?
  2 do you have wireless or wired Internet connection?
  Method 1:
  We'll first run check network troubleshooting if this can help.
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
  Method 3:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.
  How can I troubleshoot network card?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems
  For more information, please see the link.
  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• After the upgrade to IE 10, not able to download/export users excellent reports in Oracle EBS 12.0.6 forms order orgranizer

  After the upgrade to IE 10, not able to download/export users excellent reports in Oracle EBS 12.0.6 forms order orgranizer. It of something to do with the settings of internet explore, please advise to solve this problem.

  The new window opens and immediately disappears.

  Thanks for your replies.

  We can get the exported file now. In IE 10, all results export are saved temporarily in the download options, press Ctrl + J (view downloads) and save the results and open it.

• ORA-01103: the 'RAC' name in the database control file is not "STB".

  HIII..,.
  
  Im doing my dataguard, my primary side installation is a RAC 2node and Eve is a single node. IM using Database 11 GR 2.
  
  when im using the RMan command for duplication of data im getting the following error.
  
  
  
  SQL statement: alter database mount rescue
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Db in dual at 03/10/2011 18:33:58
  RMAN-03015: an error has occurred in the script stored memory Script
  RMAN-03009: failure of the sql command on the channel clone_default at 03/10/2011 18:33:58
  RMAN-11003: failure during parsing / execution of the SQL statement: alter database mount rescue
  ORA-01103: the 'RAC' name in the database control file is not "STB".
  
  
  Please can someone help me to solve the issue. ??
  
  Thanks in advance...

  Hello

  (1) If you use "DORECOVER" while cloning, please remove it.
  (2) its still not, simply set the FRA and IE

  ALTER system set DB_RECOVERY_FILE_DEST = '+ DATA ';
  ALTER system set db_recovery_file_dest_size = 2GB;

  Note: Set it to primary and standby

  Clone of the DB.

  It works perfectly now, and once Reset original value if you do not want it.

  Happy cloning :)

  Kind regards
  Rakesh

• Calculation Manager does not start after the 11.1.2.3.500 patch

  Hi all

  Before the upgrade with the patch 500 the EPM environment worked very well.

  After you apply the hotfix (17529887) and later (19142919), I am facing a strange error.

  After restarting the services, Manager of calculation does not work. All other components of EPMA operate correctly.

  When trying to start the calculation Manager, the window becomes like a Web page when there is no internet connection. Internal error in the server with instructions to check your internet connection, etc..

  I looked in several log files, but did not find anything.

  Where to look?

  Kind regards

  Philip Hulsebosch

  Hi Philippe,.

  We had the same problems with our manager of Calc, but our environment was on a SSL using SST. To apply a patch 18880328 on 17529887 to get this working. Don't know if you're on SSL, but its value give a try.

  From the Readme:

  18814874

  After the application SSL using SST, sailing Manager of calculation, may show a blank page.

  https://updates.Oracle.com/Orion/services/download?type=Readme&Aru=17802865#_Toc391649535

  You also have to apply 11.1.2.3.501 Hyperion Shared Services (18672071) If you are on SSL.

  HTH

  Thank you

• 8900 comm http hangs after the second connection (do not view with the 83XX devices or 8900 Simulator)?

  Hello

  I currently have a j2me application that is deployed in production on different devices of BB. The application is pretty simple and mainly collects the data of the user (via text fields, drop-down list boxes etc.) and send these data to our server via an http connection

  The application was deployed in production for more than 6 months and work with end users using various BB devices, like the 8310, 8320 and 9000.

  Our end users now upgrade to the 8900 and we assumed that our application would work in the same way as the 8320-I even tested my app on the Simulator to 8900 and everything works fine.

  However, using the app on a real 8900 device connected to the network Vodafone here in the United Kingdom has cast some weird problems. The app installs fine OTA, communicates initially very well (as we connect via an http post), but then any attempt further communication over http hang everything simply no error thrown?

  Closing the application does not have any change, and blocking any attempt at communication. If I restart the device (battery etc) and start the application then I can connect once more, and then the app just crashes again.

  I can't find the cause, and the fact that other physical devices and even the Simulator to 8900 work very well is weird!

  Any help or pointer to start looking in my code/settings would be appreciated?

  Daniel

  Please make sure you close your connection. or check if the current connection is close before opening another.

• Sansa View does not synchronize with the computer after the first connection

  Hey guys,.

  I just bought a refurbished Sansa View which has the latest firmware on it. I logged on to the computer and selected "view in the folder. I downloaded some stuff and disconnected.

  Now, whenever I try to connect it again, the computer or the Sansa Connect. The Sansa start loading, but the 'Sync' screen does not appear on it. The computer shows nothing and the device does not appear in Device Manager or my computer as it did the first time. If I look through the USB devices in Device Manager I see a device using the power, but that's all.

  I tried the "MSC Mode" setting in the Sansa View settings, but it is not always connect. Don't hold.<" while="">

  I use Windows XP, SP3.

  Any help would be really appreciated,

  Thank you

  Nevermind, apparently, you need to do to reset once changed the settings in MSC mode on the player. It works fine now!

• Use of high by FORMS (9000 port) when you first login after the CPU connection network

  Hi all

  Oracle E - biz: 12.1.3

  Database: 11.2.0.3

  OPERATING SYSTEM: AIX 6.1

  We applied the last week we have applied CPU July 13 for the first time in our environment Ebiz.

  Patches applied:

  11.2.0.3 SPU database Patch 16742095

  Apps: R12.1 16772121

  10.1.3 home: 9173038

  10.1.2 home: 12837860

  After the application of the hotfix, when the user is connected for the first time, FORMS cmdlet takes too long to open, and during this time network use was very high.

  This happened for the first connection, we have more than 300 + users and recording everything at the same time, created a failure almost because of the high network utilization.

  
  

  Guys, any reason for this behavior. This will happen for the future application of CPU?

  
  

  Moreover, we're on the DECISION-MAKING of FORMS mode.

  Thanks in advance

  Hello

  I'm not sure whether the cache can be copied from one machine to another and the same process, a lag in time should be tolerated in this case that it is reasonable.

  But anyway, you can also lift an SR to check whether the technical support engineers can provide a workaround solution.

  Thank you &

  Best regards

• After the update, I can't check my mail?

  After update of El Capitan, my mailbox keeps validating and I can't get past this.

  The new version of Mail stores its database in a different format that the old, so the database must be converted before Mail can use it. Sometimes, the conversion fails because the old database is damaged, or because of a bug in the conversion code.

  What you should do depends on what type of e-mail accounts you have. The first step, no matter what you do, is to save all the data, if you don't have a current backup.

  Please read this post in full before anything else. If this is unclear, ask for clarification before taking a step. If you're not convinced that you can follow instructions, stop, don't change anything.

  A. Si you know that you have IMAP or Exchange only e-mail accounts

  The easy way to recover is to delete the old database and start over. You can do this without losing all the messages, provided that:

  ☞ All your incoming mail accounts are on an IMAP or Exchange Server

  ☞ You store messages sent on the server

  ☞ You have no mailboxes "on my Mac".

  Independent mail services the best-known as iCloud and Gmail are inspired by the IMAP. On the other hand, hosted by ISP e-mail services often use pop. If your ISP is one of your providers of mail services (or the only), you cannot use this procedure. See below part B in this case.

  If the above conditions are met, please continue to do so.

  Quit Mail runs.

  Open your home folder's library folder by pressing the option key and selection

  Go ▹ library

  in the Finder menu bar. Inside, it is a subfolder named "mail". Move this folder on the desktop. You do not move the e-mail application; you move a folder named "mail".

  Launch of Mail. The mailboxes must be restored automatically. The messages will be downloaded from the servers, so it can take a long time if you have very large mailboxes. Some people have mailboxes in the gigabyte range, and which can be a problem if the bandwidth is measured or the Internet connection is slow.

  If the mailboxes are restored successfully, you can delete the folder that you moved to the desktop. You may have to re-create your rules, signatures and custom stationery Mail. If it's important for you not to have to do these things, ask for instructions before you delete the folder.

  B. Si you have a POP or "on my Mac" mailbox store, or if you don't know what you have

  Move the folder of mail on the desktop as in the part has and open.

  Press the key combination command + F to search. In the line of chips to search along the upper part of the window, select "Mail". Below, defined as the search criteria

  The name ends with mbox

  Results of the research will be a list of folders with a name ending with '.mbox '. Each of them represents a box the letters.

  Launch of Mail. All mailboxes will be empty at the beginning, but if you have any IMAP or Exchange mailbox (including iCloud), they should fill in automatically after a delay, as in part A. If you have now all the messages you want to keep, you can stop here. Otherwise, import from mailboxes in the search results. The article of support related, select

  Apple Mail

  as import format. You'll probably want to jump boxes to letters with names such as "Deleted Messages", "Junk", "Spam", or "Trash". Some may be duplicates of what you already; those that you can remove.

  In some cases, a mailbox may fail with an error to import. If this happens, thanks for posting your results.

  If all the mailboxes that you want to import do successfully, you can delete the mail on the desktop folder.

• The database connection failed while creating DataSource in Hyperion planning.

  Hi all

  I installed it and configured Hyperion Planning 11.1.2.4 and also apply the planning Patch 20937926 (Hyperion Planning 11.1.2.4.002) successfully.  When I'm creating the Source of data for planning its getting failed with reason "the connection failed" here is the screenshot of the same thing.

  

  Here is what is is connected in the logfile (C:\Oracle\Middleware\user_projects\epmsystem5\diagnostics\logs\services\HyS9Planning_epmsystem5-DD)

  
  < 18 January 2016 5:56:53 PM PST > < WARNING > < oracle.dms.context > < DMS-57008 > < the execution context put in place at the beginning of the request, 00iY3lrJCEoFw00Fzzw0w00000pC00028j, 0:1, is not the execution context at the end of the request, the 00iY3lq9ghBFw00Fzzw0w00000pC00028U, the 0:1:4. The request is the following: request URI:
  /HyperionPlanning/ADFAppWizard.jsp
  The request URL:
  http://agiph1epma.aagc.corp:19000/HyperionPlanning/ADFAppWizard.jsp
  (No query string)
  All header names:
  Accept, Accept-Language, Referer, User Agent, Content-Type, accept-encoding, host, Content-Length, connection, Cache-Control, Cookie, ECID-context, X-Forwarded-For, Proxy-Client-IP, X-WebLogic-KeepAliveSecs, X-WebLogic-Force-JVMID
  Selected header values:
  ECID-background: 1.00iY3lrJCEoFw00Fzzw0w00000pC00028j; kXjE0ZDLIPHMj8HUkLQSdVQRGSPOiUPQiNRB1KIH1GSSNPQUXISPiARSkG
  Accept-Language: en-US
  Host: agiph1epma.aagc.corp:19000
  Content-Length: 584
  Accept-Encoding: gzip, deflate
  Referer: http://agiph1epma.aagc.corp:19000/workspace/cache/2016-01-18_02-40-31/bpmstatic/thirdparty/bindows/html/blank.html?X-ORACLE-BPMUI-CSRF=D94524A8AA7DC623860541EBDDA20EAFBD99F3126088E3B74518546FFD5A84CF2EFCFDDE8C389BD9ED9232B31164972ECEBD6AE33B625120F6FAD7E40E7D3C98
  User-Agent: Mozilla/5.0 (Windows NT 6.3; WOW64; Trident/7.0; RV:11.0) as the Gecko
  Connection: Keep-Alive
  Content-Type: application/x-www-formulaires-urlencoded
  Accept: text/html, application/xhtml + xml, * / *.
  >

  
  < 18 January 2016 5:56:55 PM PST > < error > < oracle.jbo.uicli.mom.JUApplicationDefImpl > < BEA-000000 > < views. DataBindings.cpx and view. MemberSelectorDataBindings.cpx use the same usageId: view_MemberSelectorViewPageDef
  FIX: Use view_view_MemberSelectorViewPageDef as the usageId in sight. DataBindings.cpx >
  < 18 January 2016 5:57:01 PM PST > < WARNING > < org.apache.myfaces.trinidadinternal.skin.SkinCSSDocumentHandler > < BEA-000000 > < not a rule @agent valid CSS property: max-version: 1.9.2 >
  < 18 January 2016 5:57:01 PM PST > < WARNING > < org.apache.myfaces.trinidadinternal.skin.SkinCSSDocumentHandler > < BEA-000000 > < not a rule @agent valid CSS property: max-version: 532 >
  < 18 January 2016 5:57:01 PM PST > < WARNING > < org.apache.myfaces.trinidadinternal.skin.SkinCSSDocumentHandler > < BEA-000000 > < not a rule @agent valid CSS property: max-version: 1.9.2 >
  < 18 January 2016 5:57:01 PM PST > < WARNING > < org.apache.myfaces.trinidadinternal.skin.SkinCSSDocumentHandler > < BEA-000000 > < not a rule @agent valid CSS property: max-version: 532 >

  
  < 18 January 2016 5:57:03 PM PST > < warning> < oracle.dms.context > < DMS-57008 > < the execution context put in place at the beginning of the request, 00iY3lrjnIKFw00Fzzw0w00000pC00028m, 0:1, is not the execution context at the end of the request, the 00iY3lq9ghBFw00Fzzw0w00000pC00028U, the 0:1:4:3. The request is the following: request URI:
  / HyperionPlanning/faces/AppWizardMain
  The request URL:
  Http://agiph1epma.aagc.corp:19000 / HyperionPlanning/faces/AppWizardMain
  Query string:
  _afrLoop = 514090508592 & _afrWindowMode = 0 & app = & _adf.ctrl - State = gsvzi1859_4
  All header names:
  Accept, Referer, Accept-Language, User-Agent, accept-encoding, host, Cookie, ECID-context, connection, Proxy-Client-IP, X-Forwarded-For, WebLogic-X-KeepAliveSecs, X-WebLogic-Force-JVMID
  Selected header values:
  ECID-background: 1.00iY3lrjnIKFw00Fzzw0w00000pC00028m; kXjE0ZDLIPJNj8HUkLQSdVQRGSPOiUPQiNRBaHRO_JVB1GSSNPQUXISPDHPQiG
  Accept-Language: en-US
  Host: agiph1epma.aagc.corp:19000
  Accept-Encoding: gzip, deflate
  Referer: http://agiph1epma.aagc.corp:19000 / HyperionPlanning/faces/AppWizardMain? Application =
  User-Agent: Mozilla/5.0 (Windows NT 6.3; WOW64; Trident/7.0; RV:11.0) as the Gecko
  Connection: Keep-Alive
  Accept: text/html, application/xhtml + xml, * / *.
  >

  
  < 18 January 2016 5:57:11 pm PST > < WARNING > < oracle.adfinternal.view.faces.renderkit.rich.RegionRenderer > < ADF_FACES-60099 > < component in the region with the id: plnTmpl:awRgn found a page with several components of root fragment. More fragments of a root element may not display properly in a region and can have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root element. >
  
  < 18 January 2016 5:57:13 PM PST > < WARNING > < oracle.dms.context > < DMS-57008 > < the execution context put in place at the beginning of the request, 00iY3lsg08ZFw00Fzzw0w00000pC00028q, 0:1, is not the execution context at the end of the request, the 00iY3lq9ghBFw00Fzzw0w00000pC00028U, the 0:1:4:3. The request is the following: request URI:
  / HyperionPlanning/faces/AppWizardTF/AppWizardMain
  The request URL:
  Http://agiph1epma.aagc.corp:19000 / HyperionPlanning/faces/AppWizardTF/AppWizardMain
  Query string:
  _adf. CTRL-State = gsvzi1859_11 & Adf-Rich-Message = true & unique = 1453168633033 & oracle.adf.view.rich.STREAM = plnTmpl:awRgn:0:pc1:appTbl & javax.faces.ViewState =! hf4m74xtc
  All header names:
  Accept, Referer, Accept-Language, User-Agent, accept-encoding, host, Cookie, ECID-context, connection, Proxy-Client-IP, X-Forwarded-For, WebLogic-X-KeepAliveSecs, X-WebLogic-Force-JVMID
  Selected header values:
  ECID-background: 1.00iY3lsg08ZFw00Fzzw0w00000pC00028q; kXjE0ZDLIPGRj8HUkLQSdVQRGSPOiUPQiNRBaHRO_JVB1GSSNPQUXISPKMJB1GSSNPQUXISPDHPQiG
  Accept-Language: en-US
  Host: agiph1epma.aagc.corp:19000
  Accept-Encoding: gzip, deflate
  Referer: http://agiph1epma.AAGC.Corp:19000/HyperionPlanning/faces/AppWizardMain?_adf.CTRL-State=gsvzi1859_4
  User-Agent: Mozilla/5.0 (Windows NT 6.3; WOW64; Trident/7.0; RV:11.0) as the Gecko
  Connection: Keep-Alive
  Accept: text/html, application/xhtml + xml, * / *.
  >

  Can someone help me how to solve this problem.

  Kind regards

  VJ

  If it is an Oracle database, you connect to so be, you must enable the custom URL and change the url to server connection: port: sid to the server: port / servicename

  Also you can get better Planning_WebApp.log that is located in the directory the plannning managed server logs the log information.

  See you soon

  John

• After the upgrade to win10 does not show the virtual keyboard in the taskbar

  After the Win10 the virtual keyboard does not show in the taskbar when you use programs that require to connect and it does not appear iwhen attempt to use Word (version Office365). These programs are therefore unusable, unless it is a workaround.  Does anyone know how to solve this or a work around for it?

  Hello m875,.

  What 'Tablet' do you use?

  I improved my tablet of 8 flow and had no problems.

  If you go to settings > devices > typing, you can enable and disable certain functions of touchpad.

  The last two options on the bottom are disabled by default. Can you turn those on to see if this gives you what you need?

  (Automatically display the touch keyboard in glass mode apps...)

  Once, when I type a mailbox type, the keyboard will appear.

  Does that help? Let me know.