Spontaneous running after the Vista upgrade

Similar Questions

• Satellite U300 unable to operate after the Vista upgrade installation

  A couple of days, I did a Windows Vista upgrade on my laptop Satellite U300 and since that time, my computer does not work. He tried to self-diagnose this himself, he told me to shut down the computer and restart. I do that and then the! 0xc0190036! 4099/69249 (Security-Licensing-SLC-Component-SKU-Home...) appears with a black background. I tried to launch the product recovery disc but computer wouldn't it.

  Can someone offer me some tips?

  Kind regards

  Barry

  Hello

  It's very strange
  How have you tried to install the operating system recovery disc?

  Boot you from the CD and have you followed the instructions on the screen?
  Or what is exactly happening?

  Usually, the recovery disk must format the whole HARD drive and the laptop to the factory settings.
  In addition, the Vista is already activated and it s not necessary to put keys series.

  I see in the error message something about safety licenses. I m not very well what this may be, but perhaps could be a problem with activation, who knows?  :|
  But as I said above, the Vista on the recovery disk is already enabled.

• Qosmio F30-127 is unable to read the Vista upgrade disc

  Hi guys,.

  I have a Toshiba Qosmio F30 (127) with the standard front load Mat * a DVD-RAM (model UJ-846) Player.

  I have for months without any apparent problem burn a variety of CD DVD & (R/RW) and recently received my expected Vista Express Upgrade DVD which I assume adopts the format DVD RAM.

  After the upgrade of the BIOS to v3.4, I successfully installed upgrading startup, but only one of the hard drives (RAID) which has been recognized in my windows session (with the recoil, I would simply have used administrative tools > computer management > disk management) ;-(

  I reinstalled XP using the recovery disks provided original in preparation to retry the Vista upgrade a 2nd time to correct the alleged no recorded 2nd hard drive.

  However, on the startup of XP, the Vista Upgrade DVD doesn't have to be recognized at startup (i) or (ii) in the case of a Windows session, without a visible change in the drive icon to indicate the usual recognition.

  If I try to double click on the drive icon, I get the error message:

  "D:\ is not accessible. The request could not be performed because of an i/o device error.

  I have read a number of threads of support which advises: (i) changing some registry keys, which seem to be unnecessary following a procedure of recovering costs of system; (ii) the transfer mode to DMA to PIO on the primary IDE channel in Manager devices, and (iii) the offending disk and IDE/ATAPI controllers Device Manager uninstall followed by a restart of switching. I tried (ii) & (iii) independently several times resulting in Windows Installer automatically the drivers for the hardware newly found followed by a final reboot, but the Enigma DVD persists.

  I tried to install the latest drivers for the DVD RAM driver, including vF103 firmware update in the Toshiba download pages, but the status quo remains.

  Ideas or current symptoms are swinging more and more towards the likely hardware malfunction?

  Thanks for listening...

  For me, it looks like a hardware problem, maybe the lens of the player is not clean or not can not calibrate correctly in the right position

  But try first to remove the drive from Device Manager and restart the laptop.
  The operating system should recognize what it again automatically. If you want to read from this CD, and then try again.

  If she will not change the situation, then I presume that it s a failure of the equipment.

• problems with rv042g after the software upgrade

  After the software upgrade it reboot the router on every 45 seconds

  I tried this tool from Cisco RV0xxV3_FirmwareRescueUtility_v4.0.0.7 Web site without success, the problem is there, is one way that you can get the router up and running again?

  Can I run a TFTP server and download new software, or I ther a FirmwareRescueUtility for rv042g?

  Mogens Demmark

  The first firmware comes with RV042G is 4.2.0.03, so the firmware utility rescue v4.0.0.7 would not work.

  Given that your will to power cycle automatically RV042G every 45 seconds, and the problem has not disappeared after that you did a reset to factory default, the unit needs a new firmware downloaded. Please, try the following steps.

  1. disconnect the power cable to the unit.

  2. hold the reset (using a paperclip) button, while plugging in the power cable.

  3 look at the DIAG LEDS.

  4. release the reset button when you see the DIAG led are flashing.

  5. a flashing DIAG indicates that the unit runs in start mode, and a server tftp on the device is waiting for a picture of fresh firmware to the address 192.168.1.1.

  6. set up your PC with an IP address in the subnet 192.168.1.x, e.g. 192.168.1.100 and specify as default gateway 192.168.1.1.

  7. try to ping the unit with 192.168.1.1, and you should see a response from the unit.

  8. run a program client tftp (with a command line) and push an image good firmware, for example

  TFTP-I 192.168.1.1

  If the procedure above does not resolve the problem, contact the support center for RMA.

• My apple ID became invalid after the recent upgrade to ios 9.3

  My apple ID became invalid after the recent upgrade to ios 9.3. What can I do to reactivate the ID? I tried to reset my password several times even.

  For now, I am unable to pay for anything because I can't access the function of apple on the phone pay.

  Hello

  Follow the instructions here, include a link to get help from Apple with your Apple ID:

  If your identifier Apple is locked - Apple supports

• disabled the vista upgrade

  I want to know why I have to spend more money on an upgrade to Windows 7, when I spent I believe 200.00 with microsoft in end 08.My on an upgrade vista ultimate on an older laptop.i have two other computers at home that I bought two full win 7 ultimate copies when this operating system was first released in oct 09 microsoft site does not allow me to install the vista upgrade because it has been disabled.i the feeling that in the future if I create another computer or buy a laptop, I'll buy the version complete, because the updates for win 7 can have the same result then win 8 fate within a year or so.and probably in an all too short time

  Hello

  you have a post very confused as to what you ae trying to do

  you don't have to get windows 7; It's up to you whether you buy it or not

  and the upgrade of operating systems is different from the upgrade of the editions in a particular operation systyem

  and if you upgrading vista from one edition to another and the installed operating system vista had SP2 and upgrade does not, you uninstall SP2 upgrade then reinstall SP2

  ____________________________________________________________________________

  For info on windows 7:

  Windows 7 upgrade advisor

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows 7 system requirements

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  Windows 7 upgrade paths

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

• How to keep the content of persistStore after the software upgrade?

  I use persistObject to store a variable in the program, once I changed some work and update the new version of the device, I found that the historical data are passed. How to store history data after the software upgrade? my software is auto-start at the start of the unit, in order to update you have to restart the device.

  If the size of the object you store changes, and then it gets deleted.

  If you change the name of the package where you saved the object, then it will fade.

  I usually have with ropes to keep them always upgrades throughout.

• BlackBerry Z10 problems after the software upgrade

  After the software upgrade on my z10 I not receive notification for my text, whatsup and other notifications in my hub. Pls help

  I would try to reset your Hub first.

  Open the Hub and from the upper right corner, with the fingers sliding down to the center of the screen five times.

  You will see quick white screen, then a black screen with the text that the hub is set to zero.

  If after a day which not resolves your notifications, remove the twitter account of your settings > accounts, restart the BlackBerry, and add the new account.

• Cannot upgrade Windows Vista Ultimate Edition after the HD upgrade

  I have an ASUS computer which is about five years old and works fine. It runs only Windows Vista Ultimate 32-bit SP1.
  The HD has been giving signs which is failing. I bought a new HD and copied the old HD to the biggest news. Everything seems to work fine until I tried to run Windows Update. It does not allow me to update and gives the 8024A 000 error code every time I try to run it. I called ASUS for help and they said
  to contact me Microsoft.

  Thank you

  Harold

  I found the solution to this problem. I went to another Windows help forum. It is to reset the Windows Update program. I tried the one here on the Microsoft site, and it did not work. But I tried this one http://wind8apps.com/windows-update-error-code-8024a000/ and the fist solution worked like a charm. He fixed the update and install issues with Powershell 2.0. After that and a certain number of updates, it's updated, Windows Update will update to the latest version. After this release he went and found many updates, I had to install. So be patient, you're in for a little wait.

  Harold

• Rundll32 to run after the cancellation of IE9 on Windows Vista

  Hi, I am using Vista and after I closed IE9, then two rundll32.exe process running, one with 700-800 k. for this slow down my computer!

  I already clicked on "Delete browsing history by leaving" so please do not suggest that.

  Hello

  Ntdll.dll exported the Native Windows API. The Native API is the interface used by the operating system user mode components that need to run without the help of Win32 or other subsystems of the API.

  Run a complete virus scan.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-AU/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. He also does the disk check, and you may lose the amount of data.

• 2011 21 inch iMac won't start after the SSD upgrade

  Recently, I upgraded my hard drive for an SSD via a computer repair business in my neighborhood, I also upgraded the ram, but I don't think it's in the case. On a two weeks after the upgrade, my computer don't turn on more. I took it to the genius bar and they told me that the DSS had "failed." So of course, I took my computer to the computer repair company and they ran some tests, discovered that the hard disk does not (according to them, he only read this way because the apple store has run the test for a normal hard drive and not an SSD). I'm not super computer savvy, so I took their word for it.

  Now, however, it has been nearly a month and my computer refuses to activate once again. Previously, it has worked well, the fans were running at full blast - what I knew would be a problem (although the repairman told me that they 'fixed' this issue too). So the first time, I downloaded a program called SSD fan control and set the fans to run in silent mode. This second time around, I realized that it was probably a bad idea because it could lead to overheating, so I put manually the fan speed so that we could hear still run, but just not as loud.

  I tried the reset SMC, but no result. Right now, I unplugged everything including disconnect it from the power strip.

  Any other experience of power with a new SSD failure? Is there anything else I could try at home before contacting the computer again repair business? I would not be able to reach at least until tomorrow, and I'm really curious to know how they managed to get my computer back on the first time.

  Also, I've been out of my warranty period for about a year, so that's why I thought that I was not risking too much by exchanging the original for one SSD drive.

  First of all, the original in Middle 2011 iMac hard drive had a temperature sensor integrated in the drive.  More new or replacement of those who do not.

  Other World Computing sells an Apple certified temperature sensor that plugs into the SATA cable.

  https://eShop.MacSales.com/item/OWC/DIDIMACHDD11/

  I just put a 2 GB Western Digital Black in mine, with the sensor.

  I suggest all first, reinstall the OEM disc and see if it boots.

  Put the SSD in an external enclosure and see if it runs...

• How install the vista upgrade when disc is destroyed?

  Computer vista of my son had the virus and tanked. Best Buy said computer necessary, new drive hard as former disc destroyed.  Then Best Buy said they needed vista install disk to the new disk. The single disc there is the original upgrade disk. Best Buy now says he has to buy a new vista or win 7 disc original system because they cannot install it on a new hard drive with a vista upgrade disc. They also forced him buy $ 200 worth of virus protection before they would do anything.

  Something wrong here. There must be a way to recover your drive destroyed isn't here?
  Thank you
  John

  You can download a copy of Windows Vista from the following link and use the product key located on the COA sticker attached to your computer to reinstall and reactivate.

  --------------------------------

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  Windows Vista (in English) with Service Pack 1

  Windows Vista (x 86)

  X 14 - 63452.exe, boot.wim, install.wim

  Windows Vista (x 64)

  X 14 - 63453.exe, boot.wim, install.wim

  Installation instructions

  You must download the .exe, the boot.wim and install.wim file in the same place. Run the .exe file and it will extract all the files in a folder called Vista. Start Windows install will be now (cancel Setup).

  

  To create a .iso bootable extracted the files in the folder of Vista and download Imgburn. Run imgburn and select 'Create Image file from files/folders'

  

  Select the record button browse and select the folder of Vista. Then select Advanced.

  

  Left will be your folder of Vista, to the right, make sure that you have verified make Bootable Image, changed the developer ID: Microsoft Corporation, load segment: 07C 0 and loading areas: 4.

  

  Select the folder browse button then navigate to your folder of Vista, then select the startup folder and select the file called etfsboot.

  

  Select the generate button.

  

  Save your .iso

  

  Select Yes when the prompt for the Volume name, and select ok. Finally, wait for it to make the .iso file.

  Once we have the .iso file, they may want to use the Microsoft .iso to USB/DVD tool to create a DVD or bootable USB (requires a blank DVD or USB flash to at least 4 GB key).

  

  Installation and reinstallation of Windows Vista

• Windows 7 splash screen will not change after the vista update

  After updating vista 32 bit to windows 7 32 bits, the splash screen will not change and he showed the vista boot. I read a lot of forum and the web page, but this solution:

  «.. . the dummies and bad start screen for Windows 7 is due to the locale entry in the startup folder, which could not be set when editing or rebuilding the BCD. When the locale is not found, Windows boot loader doesn't know what local startup folder to look for the animated bootscreen. Thus, in order to fix the boot screen so that the splash screen can be re-established, restored or reset to original animated Windows 7 boot screen, just run one of the following commands at the prompt with administrator rights:

  bcdedit/set {current} settings regional en-US

  or

  BCDboot % WinDir % / l en

  Change the US to the language version of Windows 7 installed, as ja - JP, en - us, es - ARE, pt - BR, zh - CN, zh - TW, fr - FR, fi - FI and etc.

  Restart the computer after running the command to see the new boot UI (user interface) be used again. To check if the locale has been entered properly, just run the bceedit command in the command prompt that is running as an administrator... »

  not solved my problem and also know for many users... after updating vista in windows 7 splash screen stay the same...

  Thanks for your help
  Hispanico hispanico

  Hi hispanico,

  Thank you for visiting Microsoft Answers.

  I suggest you do a repair from WinRE (Windows Recovery Environment) system using a Windows 7 installation disc. Follow these steps:

  1. turn on your computer, insert the Windows installation DVD, and then restart your computer.

  2. Press any key when prompted to do so and follow the instructions that appear.

  3. when the Windows Installer page, click repair your computer to access system recovery options.

  4. follow the instructions.

  Please visit these links for more information on the Startup Repair:

  1. http://windows.microsoft.com/en-us/windows7/Startup-Repair-frequently-asked-questions

  2. http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options-in-Windows-7

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can I install the Vista upgrade to my system if I erased the hard drive?

  I recently struck out everything what one of my hard drives. Can I install an upgrade of Vista on it?

  The requirements for the multimedia upgrade is to have an operating system already qualify as installed Windows XP to use it

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP and let it do the verification of eligibility.

  You can try the following:

  If your computer comes with a qualifying previous license such as Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows Vista Upgrade disc.

  How to do a clean install with upgrade disc:

  Boot from the Windows Vista DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your Windows Vista key product and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

• Need info on the Vista upgrade

  Fact Toshiba suppy an upgrade from Vista or can I just use one of the stores?
  I need no special drivers or the new installation will resume the drivers already on the system?

  Hello

  As much as I know Toshiba has nothing to with Vista upgrade option.
  When you open the options of the system (Control Panel), you will find basic information about your computer and there are placed link Windows Vista upgrade.

  Either you can use this option or get Microsoft DVD facilities and install the Vista-specific option. All available drivers, tools and utilities Vista can be used on every version of Vista.