After the import index rebuild...

Similar Questions

• LR 6.2.1 - pictures (previews and views complete) turn into black after the import

  Hello!

  After the import, all the photos of change to black (in library and also to develop)

  I tried to activate / disable the extra graphics processor without success.

  It's the same thing on the 40 d and also on D 70.

  Pictures are saved in RAW, imported they come out of the camera.

  Does anyone have recommendations?

  
  

  

  Thank you!

  Siegi

  Hi Siegi,

  Please follow the steps below:

  1. Disable apply tone controls auto under Lightroom preferences > Presets tab
  2. Restart Lightroom and then import images again.

• How to keep the parameters of leica t after the import of the photo?

  After the import of the photo (.dng, by leica t), it seems very different!

  This is the original photo before importation (Preview in the import dialog box):

  

  And here's the picture after the import:

  

  More bright and different color!

  It seems that the parameters of leica t is not be stored.

  I want to keep the settings leica t, as the seen in the import dialog box!

  Anyone know how to do it?

  h.t.justfal wrote:

  I want to keep the settings of leica t, as the preview in the import dialog box.

  Anyone know how to do it?

  Cannot be done.

  What you see when you open a file in Lightroom is the camera that is embedded in the Raw file jpeg Preview: after a few seconds Lightroom generates its own preview, with the effect you describe.

  There is no way round this - you have to adjust the Lightroom settings to resemble results in the desired device and save the settings as the new default values.

• Internal components of the online index rebuild.

  Hi all
  
  What happens in the index rebuild online compared to the simple index rebuild?
  
  Why this task consumes temporary space in the tablespace where index?
  
  How to get access index is accepted when online index rebuilding... What happens internally?
  
  -Yasser
  

• For the loop index rebuild

  DB version 10.2

   BEGIN
        FOR vIdxList IN (select INDEX_NAME from user_indexes where table_name in('PORT') and index_type='NORMAL')
        LOOP
     EXECUTE IMMEDIATE 'ALTER INDEX ' || vIdxList.INDEX_NAME || ' REBUILD nologging parallel 4 ';
        5      dbms_output.put_line('-----------------');
           --EXECUTE IMMEDIATE 'ALTER INDEX ' || vIdxList.INDEX_NAME || 'NOPARALLEL';
        END LOOP;
        begin
       FOR vIdxList IN (select INDEX_NAME from user_indexes where table_name in('PORT') and index_type='NORMAL')
       LOOP
       EXECUTE IMMEDIATE 'ALTER INDEX ' || vIdxList.INDEX_NAME || 'NOPARALLEL';
       end loop;
       end;
     END;
     /

  When I try to do more high I am hit with ORA-02242 after reconstitution with nologging parallel 4. But when I run manually

   ALTER INDEX'  <index_name> NOPARALLEL 

  then ok.
  
  Some can help me please
  
  ERROR on line 1:
  ORA-02242: no option specified for the ALTER INDEX statement
  ORA-06512: at line 11 level

  BEGIN
        FOR vIdxList IN (select INDEX_NAME from user_indexes where table_name in('EMPLOYEES') and index_type='NORMAL')
        LOOP
            EXECUTE IMMEDIATE 'ALTER INDEX ' || vIdxList.INDEX_NAME || ' REBUILD nologging parallel 4 ';
            EXECUTE IMMEDIATE 'ALTER INDEX ' || vIdxList.INDEX_NAME || ' NOPARALLEL ';
         END LOOP;
  END;
  / 
  

• First Pro CC crashing after the importation of the media

  I just built my first PC a few weeks ago for the sole purpose of editing with first Pro CC, but every time I have import any media and try to use the view, the program crashes. As long as I do not import, the program does not crash. After I imported, it will be crash without worrying if she still a picture or a video.  I even tried to load the project "Eagles_Doc_Final" which gives to Adobe, as practice and which will crash immediatelysince there is already media imported.

  
  

  I'm about to start an assistant job in editing my work and I need to start training at home with first since I've only used Final Cut in the past.

  My system:

  Trial version of first Pro CC - I really want to buy a subscription, but I can't even make it work.

  Windows 7 Home Premium - make all updates using the Update window.

  Processor - Intel Core i7 4790 K - updated drivers using version 2.0 driver Intel (r) update utility

  Motherboard - GIGABYTE GA-Z97X-UD3H -Bios is version F5. There is an update F6 and F7, but do not know if it would be necessary?

  GPU - no - I wait to see how fast first Pro CC is without using a GPU for acceleration. I read that I have doesn't have a GPU to run the program. Is this correct?

  This is the error I get...

  "Adobe Premiere Pro CC has stopped working"

  Signature of the problem:

  Problem event name: APPCRASH

  Name of the application: Adobe first Pro.exe

  Application version: 8.1.0.81

  Application timestamp: 5426694c

  Fault Module name: devenum.dll

  Fault Module Version: 6.6.7600.16385

  Timestamp of Module error: 4a5bded7

  Exception code: c0000005

  Exception offset: 00000000000016a 0

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  Additional information 1: ec5a

  More information 2: ec5adb2545b190cc19da7bdfa78d5bf1

  3 more information: 52eb

  Additional information 4: 52eb6b5eb5247c23714f771b797ebaa7

  and this is the error in the event viewer application.

  General

  Name of the failing application: Adobe first Pro.exe, version: 8.1.0.81, time stamp: 0x5426694c

  Name of the failed module: devenum.dll, version: 6.6.7600.16385, time stamp: 0x4a5bded7

  Exception code: 0xc0000005

  Offset: 0x00000000000016a0

  ID of the process failed: 0 x 1114

  Start time of application vulnerabilities: 0x01d00202f06d1b2f

  The failing application path: C:\Program Files\Adobe\Adobe Premiere Pro 2014\Adobe first Pro.exe CC

  Path of the failing module: C:\Windows\system32\devenum.dll

  Report ID: 3bf56dba-6df6-11e4-9734-74d435e5c333

  If anyone can help point me in the right direction, I would gladly appreciate it. I don't want to jeopardize anything with this new job because I couldn't get this to work.

  -JR

  Hi jacobrivera68,

  Before importing anything, go to file > project settings > General and change the GPU acceleration for playback (software only) Mercury engine and see if that fixes the problem.

  Thank you

  Regalo

• DataModeler 3.0 ai2: crash after the import data dictionary

  Hello
  After you import the model data dictionary db successfully, the following operation to register as normal ".dmd" project, will unfortunately in... with the following exception error: fatal:
  
  Exception in thread "Thread-11" means: PermGen space
  at java.lang.Class.getDeclaredMethods0 (Native Method)
  at java.lang.Class.privateGetDeclaredMethods (unknown Source)
  at java.lang.Class.privateGetPublicMethods (unknown Source)
  at java.lang.Class.privateGetPublicMethods (unknown Source)
  at java.lang.Class.privateGetPublicMethods (unknown Source)
  at java.lang.Class.getMethods (unknown Source)
  at oracle.dbtools.crest.model.metadata.MetaDataManager.addClassDescripti
  (unknown source)
  at oracle.dbtools.crest.model.metadata.MetaDataManager.getClassDescripti
  (unknown source)
  at oracle.dbtools.crest.model.metadata.MetaDataManager.addClassDescripti
  (unknown source)
  at oracle.dbtools.crest.model.metadata.MetaDataManager.getClassDescripti
  (unknown source)
  at oracle.dbtools.crest.model.metadata.MDTransformationManager.createTra
  nsformers (unknown Source)
  at oracle.dbtools.crest.model.metadata.MDTransformationManager.getTransf
  ormersFor (unknown Source)
  at oracle.dbtools.crest.model.metadata.XMLTransformationManager.getXMLCo
  content (unknown Source)
  at oracle.dbtools.crest.model.metadata.XMLTransformationManager.saveObje
  CT (unknown Source)
  at oracle.dbtools.crest.model.metadata.XMLTransformationManager.saveDesi
  GN (unknown Source)
  at oracle.dbtools.crest.model.design.Design.saveAll (unknown Source)
  at oracle.dbtools.crest.swingui.ControllerApplication.saveAll (Unknown So
  extended)
  at oracle.dbtools.crest.swingui.ControllerApplication.saveAsDesign (exercise
  WN Source)
  to oracle.dbtools.crest.swingui.ControllerApplication.access$ 5800 (Unknow
  Source n)
  to oracle.dbtools.crest.swingui.ControllerApplication$ SaveAs$ 1.run (exercise
  WN Source)
  
  How can I solve this problem?
  
  Thanks in advance for your support.
  Antonino

  Antonino thanks.

  Unfortunately I'm unable to reproduce this.
  Is it possible to allow you to test the same import of 32-bit Windows?

  Ivan

• After the import has failed

  Hello, I had a few questions for you re-import. I have import me my P2 CONTENT in the library of final cut. And then somehow my connection with my drive hard Ext. naturally my import failed. Now all my video files received this little exclamation point. In any case, I tried to import them again and then my video files all returned when I arrived to file without importing content. Then he said: my video file still on the camera. So that's what I get when I try the conversion: "excerpts from camera cannot be dealt with." You need import/re-import these first of all to deal with. ». Problem is I cannot re-import them, cause reimportation became gray for these videos.

  If you are selecting the event by using the import command (file > import > import from camera / Archive)?

  Russ

• Replacement after the specified index table

  Hello

  I am completely new to labVIEW as a student. I have a question to overwrite a table once received at a specified index.
  In particular, I have to add up numbers in a table at all times and take the average of the last three values.

  I wanted to make a new table that stores the three numbers and after that, began to replace the first, then the second, the third, first of all, the second you...

  Can someone help me, showing me how to cut my tables up to a limit of 3 values?

  Thanks in advance!

  (Sorry for the bad English)

  To take the average, the order of the array is unimportant. Here's what I'd do.

  

  (With a little more code, it also works for the first couple of iterations.) See this old post)

  There's also means ptbypt, which does the same thing!

• IP address on the virtual machine windows endangered endangered after the importation of the data store.

  I'm gaving a problem with the IP on windows vm disappear after having mounted the snapshot to restore. Here's what I do.

  Mount making LUNS to the esx host area

  I have eyebrows outside the data store to find the vm I want to right click and click Import the vmx file.

  Imports of the virtual machine and when I start it up I wonder if I've moved or copied the VM. I have tried both moved and copy but when I connect to the virtual machine is missing all its IP info.

  Any way to avoid the losting vm sound IP info when I import to the host from a LUN outlet?

  Hello

  Installs on the forum of the Virtual Machine and the guest operating system.

  The MAC of a virtual computer is based on the UUID/name of the virtual machine so if you are not using a static MAC (one that recognizes VMware) and it will change the IP address might also change if you are using DHCP. So I suggest to use a static MAC in the VM configuration.

  Another way is to set up the guest operating system in the virtual machine with a static IP address instead of a DHCP function.

  But if you are unable to remove the virtual machine or the copy in the virtual machine, there may be something locking these files would be an another running virtual machine. If you need to find this VM and kill him. In this case, "vmware-cmd - L" and 'vmware-cmd - l' host in question can be useful to find where the 'hidden' VM is running.  Ultimately you can use ' vm-support - x "to find a list of the virtual machines running by how the hypervisor lists. Then use 'vm-support - Z' to suspend the offending virtual machine that should unlock everything.

  Yes, the use of these commands is command line.

  However, before using these commands determine if you can find the place where life VM incriminated.

  Best regards

  Edward L. Haletky

  Host communities, VMware vExpert,

  Author: VMware vSphere and Virtual Infrastructure Security,VMware ESX and ESXi in the 2nd business edition

  Podcast: the Podcast for security virtualization of resources: the virtual virtualization library

• Crashing after the import of the object/slide

  Hi all
  
  After that I imported slides in a project of A2 in another. Unable to save the destination project.
  
  The registration process starts, the progress poster full/full bar, but Captivate starts eating up to 98% of the processing power of the PC and never closes until I place the open Task Manager and kill the process.
  
  Anyone experienced this? More important, anyone know a fix?
  
  I have removed/reinstalled A2 twice now, but no progress.
  
  I'm running XP/SP2.
  
  Thank you in advance for your help!
  
  -Brett
  

  Hi Brett

  I always use CP1 on a system similar to yours, then I hope the fix below works.
  Try to open both projects and select the slide you want in the original file, and then copy them to the destination file.

  See you soon
  Andrew

• Main appearance came after the import of my profile

  I have a new laptop today and in what implementation I imported my Firefox on my last computer profile. Since I did it, the in4.0 aspect came back what it looks like in 3.6.16 on the old computer. I prefer not everything and start again because it has quite a few bookmarks and others that I use every day.

  Is there a solution that I missed? I have cleaned my Add-ons, changed the theme back to "default", and everything else I can think of, but he's still "broken." The only thing resembling 'straight' is that the tabs are above the address bar and it is.

  To get the new user interface, you need to hide the menu bar. Do, in the view menu, select Toolbars, then click on the entrance to the "Menu bar".

  If you need to access the menus, you can press Alt or F10 to display temporarily.

• CRD crashing after the import and export of photos

  CRD crashing whenever I have import photos, "error reading the preview cache. Need to quit smoking. "As crashing when exporting photos. Win 10 crashes not only LRCC.

  Smart insights have no impact on the problem that you reported. So leave them alone.

• Why getDBTransaction (.createPreparedStatement) is not recognized even after the import of the ApplicationModuleImpl?

  Hello world

  The following code compiles end of my ServicesAMImpl class (which extends from ApplicationModuleImpl). But if I move it to a "common" class, the code below is not even when I import the ApplicationModuleImpl class.

  protected void callStoredProcedure (string instruction,

  Object [] bindVariables) {}

  PreparedStatement a preparedStatement = null;

  try {}

  // 1. Create a JDBC PreparedStatement class.

  preparedStatement =

  getDBTransaction (). createPreparedStatement ('start' +)

  Statement +.

  "end;", 0);

  If (bindVariables! = null) {}

  // 2. Loop over the values (if any) to bind variables.

  for (int i = 0; i < bindVariables.length; i ++) {}

  // 3. The value of each variable binding in the statement.

  preparedStatement.setObject (i + 1, bindVariables [i]);

  }

  }

  // 4. Run the statement.

  preparedStatement.executeUpdate ();

  } catch (SQLException e) {}

  throw new Aexception.getLocalizedMessage (e);

  } {Finally

  If (class preparedStatement! = null) {}

  try {}

  // 5. Close the statement.

  preparedStatement.close ();

  } catch (SQLException e) {}

  System.out.println ("Exception in callStoredProcedure ("+ ")

  "String statement, +.

  ("Object [] bindVariables):" + e);

  e.printStackTrace ();

  }

  }

  }

  }

  James

  James,

  This is simple Java. The method that you have problems with, getDBTransaction, is a method that is implemented in the module application implementation class. When you move the method into a common class travel you outside the module of the application and the getDBTransaction is not accessible.

  As the only application module handles transactions, it is not supposed to move your method out of the module of the application.

  Timo

• random picture in order after the import control

  Hi all

  When I import images as a sequence into AE CC (v.12.2.1.5), I select an image, and then check the sequence "JPEG". Sometimes I have the folders that contain the missing files, I have I case also tick 'Force' in alphabetical order.

  However, it seems that it is working properly now. A part of the sequence is correct, but there are also a few pictures that appear at random places in the sequence. Is this a bug? What should I do to avoid this?

  Cheers, Tetsu

  Use standard naming conventions in your files and keep the number so even numbers. IOW, if you have 200 frames your files should be named myImage_001.jpg to myImage_200.jpg and not myImage_1 to myImage_200.