After the setup of Effects 7.0 (Windows)

Similar Questions

• After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault. Any ideas to fix this?

  After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault.  Any ideas to fix this?

  This was the solution!  The works of vpn as $ 1 million now.  I followed the instructions above to enter the uninstall program and selecting the repair option.  I rebooted the machine, then used the troubleshooting on vpn software compatibility option.  Selected Windows windows xp (service pack 2) as the correct software and cisco vpn client started right up.

  Thanks, Nick!

  Rick

• Envy of HP dv7 - 7323CL: HP driver not available for my laptop after the WIN10, now said to use Windows updates

  I think I got this, just need confirmation, before I was going to HP.com to find udpated pilots, then site Web HP said if computers purchased after August 2013 have been tested, I think you could get the updates via the HP with WIN10 site.  My pc model was purchased in February 2013, it seems now that I have WIN10 there is no drivers for me page to go it says that I need to go to the updates of Windows.  Before I upgraded to 10, I was 8, and I had full access to the drivers download through HP.com page.  However, I think I understand now, I had a problem with the Norton Removal Tool, after using it, it makes my pilot biometric and disabled the Windows Hello to WIN10 - the reader of fingerprints for a connection.  The pilot appeared to be corrupted and I needed to just reinstall.  I finally found an old forum via HP where someone has had the same problem that I did and they are found to include a link for the driver, and it worked for my model of laptop and solved the problem.  After some tests, I uninstalled the driver and learned at that time, after the driver is uninstalled, I can go to Windows Update and it will search and find the driver that I uninstalled and offer me the download to reinstall.  That's cool.  So, I understand now that even now if the drivers are not available for my model via HP.com, I can now just do a search through Windows Update and it will fix the problem, only after that I uninstalled it through Control Panel, Device Manager, once I uninstalled, restarted the computer, then did the updates of Windows It downloaded the driver, like when I went to the Control Panel, Device Manager, I saw the biometric driver in good working condition.  This is the case now with who need driver updates / reinstall?  (Note: to update the drivers, I know too much, you can go to control panel, Manager of devices, and then click the driver and select Update driver software.)

  Hi @MVP1 ,

  Welcome to the Forums of HP Support! I have, I understand that you are concerned about Windows 10 updtaes. I'll be happy to help you.

  You are right.  Microsoft took the drivers for this computer.  All updates will now come from Microsoft.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• After the SP2 on Vista 64 update, Windows Update will reflect no updates in the history of the update successfully, only to fail.

  I'm running Vista 64 on a laptop HP Touchsmart.  I've recently updated to SP2.  It took me 3 tries to get to SP2.  I had there problems were as a result of security, Macafee, who had to be disabled to update, I discovered.  Now, Windows Update will install the updates but it reflects not in the update history.  It shows then available updates again and when I try to install the second time, they do not.  Failure is displayed in the update history.  I discovered I can manually download and install updates and they do not show as much success in the history of the update and the updates that Windows Update detects were removed.  I completely disabled Macafee but did not help.  Any suggestions?

  I'm running Vista 64 on a laptop HP Touchsmart.  I've recently updated to SP2.  It took me 3 tries to get to SP2.  I had there problems were as a result of security, Macafee, who had to be disabled to update, I discovered.  Now, Windows Update will install the updates but it reflects not in the update history.  It shows then available updates again and when I try to install the second time, they do not.  Failure is displayed in the update history.  I discovered I can manually download and install updates and they do not show as much success in the history of the update and the updates that Windows Update detects were removed.  I completely disabled Macafee but did not help.  Any suggestions?

  Suggest you clean boot Vista x 64 . Perform step 1 .
  Once in the clean boot state, run the Fixit here in clicking on the Internet Explorer shortcut and choosing "Run as Administrator" . Enter a password, if one is used, or click on the button continue. :
  How to reset the Windows Update components?

  Then click the Fixit button, click run in the file download dialog box, and follow the steps described in the fix it Wizard. and choose the default option. Restart the system after the tool runs and check if updates are available, and if they install automatically.
  Since it's Patch Tuesday, updates should be available for the system soon, if not today.
  IF no updates installed automatically in the coming days, rerun the Fixit but aggressive use.
  Don't forget to Cancel the clean boot once you have completed the steps running the Fixit.

  Please be patient. If you want to see if updates are available but are regulated, check WindowsUpdate.log: How to read the Windowsupdate.log file
  Scroll down for the latest entries. IF updates are regulated, you will see an entry or entries that are similar to this:

  2009-08-17 07:36:45:739 980 370 DnldMgr rules: {9482F4B4-E343-43B6-B170-9A65BC822C77}-DAA5C9BF-D188-40FE-AF01-DFC72D5D422A update is the 'priority' regulated and can NOT download. The sequence 5472 vs AcceptRate 0. MowGreen MVP Data Center Management - update of safety Consumer Services

• Whenever I start my computer after the office's I get a windows firewall disabled alert

  Whenever I start my computer after the office is responsible, I get a warning from windows firewall disabled. The latter for more than 60 seconds. After that, my firewall is on.
  How to solve this delay?

  Hello

  What is firewall WIN XP or any other third-party firewall?

  If it is integrated, you can reset the firewall in factory default state. Run from the command prompts this command:

  NETSH FIREWALL RESET

  How to run the command prompt:

  Click on Start - run - write CMD , and then click OK

  LC

• After the removal of some components of Windows, I lost some features on my XP computer

  I recently tried to fix errors after upgrading to Windows Live, including the removal of some components of Windows (oops)!  Now I can't use Internet Explorer, I don't have a calculator or the original games...  I tried to restore the system to an earlier date and it does not work... or help?

  * original title - my OS is Windows XP Media Center period

  Hello

  · You receive an error message or error code when you access internet Explorer?

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)

• After the attack of virus cannot activate Windows Firewall

  Something has attacked our copmputer. We have done several virus scans to correct the problem, but we cannot yet turn on the firewall on, what can be the problem?

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and use scanners online and other methods.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  AdwCleaner
  http://www.bleepingcomputer.com/download/adwcleaner/
  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Scan online ESET
  http://www.eset.com/onlinescan/

  Scan Kaspersky online
  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Blue screen after the recent updates of security for Windows XP SP3.

  I got following error messages "Blue screen" after the latest updates from Microsoft:

  0X0000007E (0X8053355E, 0XBA4CB50C, 0 X 80000003, $0XBA CB208). I tired to run in all modes of SECURITY but still had the same problem. I ran Dell diagnostics and it came with no error in memory or hard drive. I have a Dell Inspiron B130 w/2 MB of RAM. Does anyone have a solution? The laptop came with no CD boot.

  @Jazzman1962 and flowie,

  I suggest you follow the steps mentioned by 'LThibx' in the http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1thread.

  -------------------------------------------------------------------
  Naveen
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• try to get out of the Setup Wizard mode and secure windows not installed right

  in the Middle using my wireless mouse, my laptop has slipped into my keyboard and my mouse is not responding. I tried to reinstall the ihome cd and I get an error saying my computer is in safe mode or my windows installation wizard is not installed right?

  Hey ludovicrohr,

  It would be possible that the Windows Installer is damaged. Follow the suggestions in the article given below to repair windows installer issues.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
  http://support.Microsoft.com/kb/2438651/en-us

  Once it is resolved, try the installation and see if your keyboard and mouse started working.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After the new motherboard and processor installation Windows requires key, key to the sticker will not validate.

  I installed a new motherboard and processor to my PC and now it's me demanding in the news two days to activate windows. I type the product key that is located on the sticker and it refuses to validate. Assistance is needed.

  The key on the sticker code is assigned to the brand of the computer to which it is applied. Regardless of the brand, changed the m/b and the CPU (unless provided by the original manufacturer is a NEW computer.)

  If the advice of George do not work, you will need to purchase Windows 7 new...

• Windows will not activate after the hard drive is replaced on Windows 7 Home Premium.

  Recently, I had a hard drive crash and had to replace my hard drive. I took it to a computer to fix store, and they have installed and gave me a new drive for windows 7 Home premium. However, it was not approved, and I have no key validation. How can I validate windows now?

  Search for your key on the side of an office or downstairs (sometimes inside the battery case) of a laptop.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) clearly explain your problem to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone
  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• Problems accessing the HP Recovery Manager after the installation of new copy of Windows 7.

  I have the HP Pavilion dv6 (2043us) originally with Windows 7 Home Premium. A recent storm crossed in my area, which seems to me to be the cause of a corrupt hard drive file that prevented Windows startup. My extra fathers using copy of Windows 7 Ultimate (is a prominent IT guy for his company, he has a lot to lose) I decided to install it from that rather than using the HP Recovery Manager in order to save my files (Windows Startup Repair and system restore failed, and to restore the default factory was not desirable) as I mentioned it because of my desire to save my documents) I have installed on the same partition as the original windows, allowing files to be viewed in Windows.old.

  However, after all that, I came to the will to restore the default settings. However, after you press (esc) and (f11) to access the Recovery Manager, it is bring up the Windows Startup logo and the login screen. Is it possible to access the Recovery Manager and restore the default settings? If so, how should I do this? As I said, I left all the original parts intact, so I do not think it is possible after some research, but I'm not sure how to start the process.

  This method to get the active recovery partition was first introduced to me by Cheryl here on the site. It may or may not work.

  Right-click on computer and click Manage > search in the list on the left, and then open disk management. You should see the recovery partition it. Click right and whether it is active and the next time that you start it up, it should boot into the recovery partition and restore back to the factory.

• My device audio stop working after the installation of update security for Windows 7 for x 64-based systems (KB2286198)

  Hi, since Windows Update automatically installed this patch my audio device stop working. It does not appear in Device Manager. I've restored the system to a previous point and works now. I have disabled the automatic updates of Windows, but I really appreciate if Microsoft Support could check this because at some point, I will need to continue the update of Windows (because of several security mistakes!).

  Thank you!

  I restore my system to an earlier point and did not work! After several hours of searching for a solution in the web I realized that (fortunately!) I had a copy of the registration precedent and do a comparison, I noticed that some missing case book lines:

  In

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\HDAUDIO\FUNC_02 & VEN_14F1 & DEV_5051 & SUBSYS_103C30D6 & REV_1000\4 & 38993660 & 0 & 0002\

  The 'Control' key with a string value 'ActiveService "=' Modem' was absent.

  Also in

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30D6 & REV_1000\4 & 38993660 & 0 & 0001

  I added a 'Control' button with a string value "ActiveService" is"ksthunk".

  Finally, I restart my system and Windows again recognizes my camera and the driver installed!

  Of course this solution depends on the machine you have. I have a HP Pavilion dv2000 with Conexant High Definition SmartAudio 221.

  I hope this helps someone!

  NOW I'M GOING TO TURN OFF WINDOWS UPDATES!

• Surround sound cut during the game Mass Effect 2 on Windows 7 x 64 bit

  Original title: Surround sound cut while in games

  I gathered all my own office.

  Here are a few basic requirements.

  Procoessor: AMD Phenom II 955 3.2x4

  Motherboard: Asus M4A77T/USB 3.0

  Graphics card: Nvidia GTX 460

  8 GB ram

  Here's my problem:

  My surround sound cut while I play Mass Effect 2. Sometimes not entirely; I'll be able to hear the music, but not dialogue. Other times I can hear the dialogue but not the music.

  I use a headset usb (Logitech G35 7.1 w surround)

  What happens if tried:

  Update the bios.

  Update card drivers his (motherboard onboard)

  Update drivers Logitech G35.

  Patchwork of Mass Effect 2.

  __

  In addition, on people of forums to effect mass who use Windows XP disable their hardware acceleration and solve the problem. I can't find this option in Windows 7 x 64.

  :) Help is appreciated...

  Hi korlath,
  First, make absolutely certain that your soundcard Control Panel, but also the sound properties in the control panel are properly configured to use the number of channels you want.
  If you are still having problems and you want audio equipment, follow these steps:
  a. go to your C:\Users\\Documents\BioWare\Mass Effect\Config directory and rename the file to something else BIOEngine.ini.
  (b) launch Mass Effect without running the Config utility. The game will recreate BIOEngine.ini using the default values, and must correctly identify your audio hardware.
  c. in the in-game Audio hardware settings should already be selected - do not change back to audio software or make other changes to the sound settings.
  Note: Audio: If checked, the game uses hardware acceleration that improves the audio quality and performance. I recommend you check this option in most cases, unless you are having audio problems or other problems. In particular, note that you will need to check this option if you have a multichannel audio system and use more than 2 channels.
  Hope this information is helpful
  Kind regards
  Ajay K - Microsoft support
  -------------------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think

• Remove the spaces after the launch of directx10 games in Windows 7 64 bit

  Hello

  Whenever I try to run a game that uses directx 10, the screen turns off, and the computer becomes inadmissible.

  I did a search on the web, and it seems to be a problem with the installation of games that use directx 9 .0c, because they seem to force the installation of the first. Appearently, it replaces some dx11 files and this allows.

  Apparently, the solution is to reinstall directx, which I did, but to no avail. There is no error in dxdiag, and he displayed that directx 11 is the current version:

  Time of this report: 24/01/2010, 22:58:48
  Computer name: HABs
  Operating system: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_rtm. 090713-1255)
  Language: English (regional setting: English)
  Manufacturer: Gigabyte Technology Co., Ltd..
  System model: GA-MA785GM-US2H
  BIOS: Award BIOS v6.00PG Modular
  Processor: AMD Athlon (TM) 64 X 2 Dual Core Processor 5000 + (2 CPUs), ~2.6GHz
  Memory: 2048 MB RAM
  Available OS memory: 2046 MB RAM
  File: page 1130 MB used, 2962 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  DPI setting: Using System DPI
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7600.16385 64 bit Unicode

  I have tried several games now, and they all have the same problem:

  Side lost half-life (steam)
  Crysis
  3D mark vantage (not a game, but it has the same issue)

  I got setup of directx from directx home page, and I had the latest version. I even tried to download the redistributable. The question is, can I somehow fix directx? Have I downloaded the wrong version, and if so, where can I get the right version?

  Edit: my graphics card:

  Display devices
  ---------------
  Card name: ATI Radeon HD 3800 Series
  Manufacturer: ATI Technologies Inc.
  Type of piece: ATI display adapter (0 x 9501)
  DAC type: DAC (400 MHz) internal
  The device key: Enum\PCI\VEN_1002 & DEV_9501 & SUBSYS_E620174B & REV_00
  Display memory: 1275 MB
  Dedicated memory: 508 MB
  Shared memory: 767 MB
  Current mode: 1680 x 1050 (32 bit) (59Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: Acer AL2202W
  Monitor ID: ACRADA4
  Native mode: 1680 x 1050 (p) (59,954 Hz)
  Output type: HD15
  Driver name: atiumd64.dll, atidxx64.dll, atiumdag, atidxx32, atiumdva, atiumd6a.cap, atitmm64.dll
  The driver file version: 8.14.0010.0716 (English)
  Driver version: 8.681.0.0
  DDI Version: 10.1
  : Model WDDM 1.1 driver
  Driver attributes: Final retail
  The pilot/size date: 2009-11-25 02:50:14, 4683776 bytes
  Would be WHQL logo: Yes
  Date stamp WHQL:
  The instrument identifier: {D7B71EE2-D641-11CF-3776-2AC6A1C2C535}
  Vendor ID: 0 x 1002
  Device ID: 0 x 9501
  SubSys ID: 0xE620174B
  Revision ID: 0x0000
  Strong name of the driver: oem3.inf:ATI. Mfg.NTamd64.6.1:ati2mtag_RV630:8.681.0.0:pci\ven_1002&dev_9501
  The driver rating: 00E62001
  Video Accel: ModeMPEG2_A ModeMPEG2_C
  Deinterlace caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) Format (In/Out) = (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
  {6E8329FF-B642-418B-BCF0-BCB6591E255F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) Format (In/Out) = (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
  {3C5323C1-6FB7-44F5-9081-056BF2EE449D}: caps Frames(Prev/Fwd/Back) = (0,0,2) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: caps Frames(Prev/Fwd/Back) = (0,0,2) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {6E8329FF-B642-418B-BCF0-BCB6591E255F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
  D3d9 Overlay: Unsupported
  DXVA-HD: not supported
  DDraw status: enabled
  D3D status: enabled
  AGP status: enabled

  n00bzor,
  The dxdiag you posted, it looks like your video driver is not the most recent.  The latest from the ATI Web site has a date of 27/01/10.  I suggest you upgrade to this pilot and test.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.