Storms machine lost after upgrading vsphere vmware

Similar Questions

• After upgrading vSphere 5.5 replication device cannot add VM replication

  Dear all,

  We have improved our server vcenter and device of replicaion of vpshere of version 5.1 to 5.5. after upgrade cannot add new virtual machine replication replication vsphere device. Configure the replication vsphere option grey out on VM right click menu. See the image below.

  

  Please advice how to solve this problem.

  Thank you and best regards,

  Lasa.

  Hello

  There is a known issue for this behavior described in VMware vSphere replication 5.5 Release Notes (shares of vSphere in vSphere Client Web replication are not available after the upgrade.) The solution is to restart your Web Client vSphere

• Corruption of the repeat rate of the keyboard after upgrading vsphere 5.0

  I currently have a problem with some of my XP VM.  We have a group of two moderators which I upgraded to esxi5.0 recently and since the upgrade of the tools on a number of machines that I had the following problems.

  Using the Vsphere console have not seen a problem with RDP.

  On XP but NOT on Linux or windows7

  After the reboot the virtual machine, and then at a random time, the keyboard repeat rate going funny IE, press a button and release it as fast as you can results in 20 characters in the Notepad window.

  Can solve the problem by going into the properties of the keyboard in the control panel and change the keyboard typematic rate, it does not matter what you change to or if you change it back to where it started, the problem disappeared for a while.

  The problem refers to a random time again and can be fixed in the same way.

  Restart the virtual machine has no effect.

  VCenter restarting has no effect.

  Restart all clients of VSphere has no effect.

  Restart the local running vsphere client pc has no effect.

  Opening of the two consoles on different clients in different vshpere on the PC to connect to the same VM - you can have the issue and the other may not have a problem.

  VSphere client 5.0.0 / 455964

  VSphere Host1 5.0.0 / 469512

  VSphere Host2 5.0.0 / 469512

  I don't know what else to try, any help would be greatly appreciated.

  Welcome to the community!

  Try increasing the value of "keyboard.typematicMinDelay" of the virtual machine. Ref: http://kb.vmware.com/kb/196

  • The virtual machine power off
  • Make a right click Select Edit virtual machine settings
  • Click Options > general > Configuration settings
  • Click Add a line
  • Under name, enter keyboard.typematicMinDelay in the value to 2000000
  • Click OK
  • Turn on the virtual machine

• lost after upgrade to El capitan photos

  Help

  I lost priceless pictures of a loved one lost after updating my old OS to El Capitan.

  I now try to revive photos, hold the option key and select another photo library to see if this will bring my photos.

  I was using an old OS and when my iphone 5s was stollen over the weekend, I bought an iphone 6 when I plugged the new phone to put all of my previous settings and data on it said I have to upgrade my operating system to synchronize this phone.

  I hesitate to update the system, but did it anyway.

  then, when she opened the only pictures that remained on the computer are those that have been taken with my iphone or photos that come from the internet or social networks.

  I lost all my albums of photos taken with a canon ios device.

  These photos are not in time machine.

  How can the computer just delete the photos on its own... How does he choose what to keep and what to delete.

  Please help... I refuse to give up and accept that the computer can simply delete photos and videos.

  Take a look in your images folder and see if there is an iPhoto library.

  What OS did you spend.

• Audio lost after upgrade to Vista on a Satellite Pro A120 PSAC1E

  Hello

  I just upgraded to vista and I lost my audio. I tried all the latest orders, still no luck. The pc says the driver is installed and the device works correctly, but I can't hear anything. Volume is 100% also.

  Any ideas?

  Well, first of all how someone should provide advice, if you n t write anything on the name cell phone you! ???
  Then please provide more details on your laptop!

  I noticed the same problem on the satellite U200. After upgrading from XP to Vista there is no sound, but the audio driver has been correctly installed and audio chipset has also been recognized correctly.

  After a long investigation, I found a solution here in the forum.
  First, it was important to increase the volume to the maximum with XP installed. Together sound controls must also be set to max.
  Be sure to use the RIGHT driver sound after the new installation of Vista.
  Not all drivers are working!

• All-in-one Officejet 5610: function Scan lost after upgrade to Yosemite

  Lost the ability to analyze after upgrade, print, and copy works. Have already done everything suggested by Double-U-di in the Mac OS 10.10 post Yosemite and HP Printer Support posted on 30/10/2014: checking for updates Apple, printer removed from the queue, add printer back, reset the printing system, removed the HP software, repair disk permissions * manually installed HP printer drivers v3.0 and added to the queue printer. No change, printing & copying ok, but the scanner does not.

  During approval of the repair disk found a number of problems related to printing and presumably repaired, had more to do with the ' should be 80, group is zero ", but others as well.

  Anyone know what I can do, short of buying a new printer? I realize, it's a dinosaur - always attached via the USB port, but she worked just beautifully before the upgrade.

  Hello @DrBucky,

  Welcome to the Forums of HP Support!

  I understand that you are not able to scan from your HP Officejet 5610 all-in-One Printer to your computer Mac OS X 10.10. I would like to help you to solve this problem today. Thank you for all the troubleshooting steps you tried before reaching out for support. You have completed almost all of the recommended steps. However, the order in which the steps have been completed can cause some problems. Therefore, I will be having repeat you some of these measures to ensure that the appropriate driver is being used.

  Step 1: Reset the printing system and uninstalling the driver:

  It is crucial for the repairs we have a clean slate to work with. Therefore, I'll take you reset the printing system and Uninstall the drivers for your HP Officejet. Please click here for instructions on how to perform the reset and uninstall. Once the site opens, select the drop-down list for 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9'. Then, please follow the steps in the method 1 and method 2.

  Once steps have been taken, please proceed to the next step.

  Step 2: Check and repair your Mac disk permissions:

  It is very important to perform the audit before the repair. By running the check first, questions are found. Once all questions are found the repair process will correct these problems. By repairing just without checking first, questions may be missed.

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 3: Manually install the driver Package:

  Please click here to manually download the package from Apple to HP v3.0 printer driversupdate. Once the site opens click on the download button at the top. Follow the instructions on the screen to install the driver package.

  Step 4: Check the Apple updates:

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 5: Add the device:
  

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scan and then check if the name of your printer appears in the printer list.

  3. click on the name of your printer, click the sign minus (), then remove the printer.

  4. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer.

  5. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the Officejet driver is selected.

  

  6. click Add to add the printer to the list.

  -Source

  Once your printer is properly added to, please try to scan the image. For instructions on the three supported methods of scanning without HP software please click here. The support document indicates that it is for Mac OS X 10.8 but the steps are the same for Mac OS X 10.10.

  Please let me know if a retry of the procedure described in this new order solves your problem of scan. Good luck!

• CLJ CM1312 nfi: Scan function lost after upgrade to 10 W

  After upgrading to W10 my printer seem to have lost the option to scan. I looked on this forum but have not found an answer to solve the problem. I use the printer on a local network with different laptops. Other laptops are still on W8.1 and have no problem. Any suggestion to solve this problem?

  Hello

  Just to rply to my own message problem solved!

  Go to the microsoft store and install the app: Capture and scanning HP.

• Data lost after upgrade to Windows 10

  From Windows 7 to Windows 8, the address book and all the information has been lost. He did not return with Windows 10. A professional computer man could not find.  Help, please.

  Hello

   
  Please contact Microsoft Community.
   
  Please confirm this information to help you better:
   
  1. the application or the e-mail client you use. ?

  2. are you able to access the contacts folder by using the web browser. ?

  3. Apart from the missing contacts, it is able to send and receive emails after upgrade to Windows 10?

  Get back to us with the required information, we will be happy to help you.

   

   

  Kind regards

  Anusha

• Lost after upgrade ios10 notes

  How is it possible to recover all the local notes that disappeared after upgrade to iOS 10?

  (On the iPhone 6)

  Thanks for help :-)

  Marco!

  If you have backed up your data, as Apple recommends the update to iOS 10 - official Apple Support, you can restore your iPhone, iPad or iPod touch backup - Apple Support

• Printing 15 files lost after upgrade to Windows

  Recently, I helped my mother with the upgrade of its Windows Vista computer to Windows 7 Ultimate.

  I chose the option 'custom' improvement All were found in the "Windows.Old" file on the C: drive, but it is unable to locate his printing 15 files.

  She managed to locate "Thumbs" or "Vignettes", but we are unable to open them in the print shop.

  Could someone please help locate files printing 15 of my mother?

  The following article, default print shop projects are saved in the Documents:

  http://forums.encoreusa.com/TM.asp?m=40501

  If you upgraded as you noted, then print shop project files must be in the start menu > Documents

  If you still do not see them then go to the section C:\Windows.old\Users\OLD_ACCOUNTFOLDER\Documents

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Connection iSCSI lost after upgrade

  
  After having upgraded my HP Proliant DL380 G7 of ESXi 4.1 to 5.1 U2 ESXi, I lost my iSCSI connection.  Fiber connections are fine, no question here.

  I use the flavor of HP ISO updated via the Update Manager.

  I would be grateful if someone who took this expericnec and is committed to it please share what has been done to solve this problem.

  Thank you

  This is the network driver for this adapter for VMware vSphere 5.1

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=3913538&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4141%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  The current version of the driver is: 5.0.636 (February 18, 2014)

  It is possible update 2, put in a new driver by default in it or put a driver that simply doesn't work properly with this network adapter.  Is this the only nic you use iSCSI for?

  You should really spread your connections on two just physical NICs wrap one of the network adapters fail so you don't lose your iSCSI connection unless you can suffer a loss to your iSCSI and it's not a big deal.

  Here's the Vmware KB article how to check which version of the driver of network that you are currently using:

  VMware KB: Determine what storage driver or network is actively exploited on ESXi host

  The document talks using the update command to update the driver, but it is my experience that its better to just do an uninstall / install, but you can try the update, assuming that this is a driver update.  I have a feeling it will be a lower version than what is currently in place.

  You will use the following command to install or update:

  software esxcli vib install zipfilenameofdriver d

  or

  esxcli update software vib - v vibfilenameofdriver

  I also found some installation instructions in the zip file

  Hope this has helped

• Access to the network in all virtual machines lost after that put 8.1 to level.

  Today, I upgraded my host computer to Windows 64-bit Pro 8.1. I did the upgrade through the Windows store. There are no errors or problems during the upgrade.

  However: The host machine equipped with a Qualcomm E2200 network adapter, and it runs the 'Killer' Network Manager software called at startup. After the 8.1 update, when the machine did its last restart, Qualcomm Network Manager opened with a message that the LSP has not mapped correctly. I clicked 'YES' to remap it. Probably a stupid move on my part.

  Thereafter, I lost all network connectivity in all my virtual machines. I have virtual machines for Windows 8, Windows 8.1 RTM (not the preview) and Ubuntu 12.04 LTS. ALL of them have lost the network.

  The host computer has no network problem and works well after the upgrade.

  Any ideas or suggestions to reset network connections in virtual machines?

  All virtual machines are set to use NAT.

  Oh I have to say also that the host computer is running VMware Workstation 10 and everything was fine and dandy, has never had problems at all until this upgrade/LSP remap thing. I have install VMware Tools in the VM of Windows 8.1, with no effect at all.

  Thank you.

  -J

  Two things, I'll try:

  1. go in the virtual network editor and restore settings. The culprit is probably the VMNet to NAT configuration.

  2. If this does not work, it seems that the virtual card for NAT does not somehow. The simplest workaround is to uninstall and reinstall the workstation.

• How to recover messages lost after upgrade to El Capitan

  After the upgrade to El Capitan! 0.11.3 much mail in Apple Mail has been lost. How can it be recovered?

  Your Time Machine backup. Mail (Yosemite): restoration of the mailboxes and their content in

• Deploy from model does not not after upgrading vSphere 5.5

  Hello, we have recently upgraded to vSphere 5.5.  We have deployed a new vCenter server as part of the upgrade and after you add the models again in the inventory on the new vCenter server, I'm not able to deploy a virtual model computer.  Get the "unable to complete copy of /vmfs/volumes/.../template.vmdk file" when it gets to step 'copy of Virtual Machine files.

  I checked that there are no locks on the vmdk

  I converted the model of a machine virtual, deleted (not deleted) the disc has added a new drive (from existing), saved, powered by the virtual machine, power and he converted.  Still doesn't work do not with the same error message.  Has anyone other that saw issue before or have a glimpse into what could be the cause?

  The question was NetApp VAAI Plugin for NFS.  Installed 1.0.21 that solved the problem.

• Windwos 2008 discs you wish after upgrade vSphere HW V7

  Don't know if this is a problem known so sorry if I'm duplicating here - W

  e has noticed a problem with all of our machines of windows 2008 with more than 1 vdisk comments. After the upgrade to V7 HW all the disks would disappear except the Disk0. The VM booted up but couldn't see a single disk.

  Using dispart - drive list, we could see all the disks where there but drives additional 1,2,3 etc. where marked offline

  We have marked themonline with the following commands

  Select disk 1

  online drive

  Whe did with each drive and they are now online, but offline read-only-, we fixed this with these commands

  Select disk 1

  att disk clear readonly

  This past with all of our machines in 2008. Anyone else see these issues?

  see this

  http://KB.VMware.com/kb/1013109