Printer will not work after uploading NT4.0 on Vista 32-bit

Similar Questions

• HP printer will not work after uploading student office 2010. I run windows 7

  Why my HP 1600 printer won't work because I downloaded student MSN Office 2010?

  Hi Gail,

  What happens when you try to print?

  Adding to Smittychat suggestions, please refer to the following article on how to fix printer problems using HP Diagnostic Tools for Windows

  Find and fix common printer problems using the tools of diagnosis HP for Windows

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c02073861

  I hope this helps to solve the problem. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• Remote control of my cell phone will not work after the upgrade to Windows Vista in Media Center window.

  I have a Toshiba Qosmio G35-AV600 originally shipped with Windows XP.  I did a clean install of Vista, which resulted in my remote no longer works.  It runs on my laptop. But the contoller stopped working in Media Center window.  And it does not turn off the computer.  So basically so that Vista runs the remote is useless.  I hope that someone a lot smarter than me can help you.  I looked on the forums of computer manufacturers and known issues advice with no luck. I have visited many sites looking for a solution.  Someone has an idea?  This problem is fixable?

  Check again - Device Manager this time select the option for "Show hidden devices'in view in the menu bar."

  It can show the unit.

  Other than that, you might be better off trying forums for Toshiba http://forums.computers.toshiba-europe.com/forums/index.jspa

• Photosmart C4280: Photosmart Essential 3.5 will not work after the Win 10 update

  The Photosmart Essential suite, which includes the scanning software will not work after the upgrade to Windows 10.   There is no message error that pop up or are listed in the event log.  Printing continues to function properly.    If the s/w is not compatible with Win 10 there the other scanning software free that I can use?

  Hello

  Thank you for using the forum.  Think that you are facing the same problems as others with Win 10 updates.

  Try this solution:

  http://h30434.www3.HP.com/T5/inkjet-printing/HP-Solution-Center-fails-to-launch-cannot-open-solution-here/m-p/5424438/highlight/true#M515792

   

  Hope that helps.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• Old HP P1100 printer will not work with Vist, which driver do I?

  After you have reinstalled my Vista OS, the old HP Photosmart P1100 printer will not work.  Should which driver I?

  That is very good news. What set of drivers that you finally end up using?

• Apple Software Update will NOT work after upgrading to Windows 7

  Apple Software Update will NOT work after upgrading to Windows 7

  flyboy340 wrote:

  Apple Software Update will NOT work after upgrading to Windows 7

  More information is needed.

  Which machine you use, OS X are you running?

  Windows 7 running in BootCamp?

  The OS X app store is not present at all?

  AppStore is present but the update tab does not?

• Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own.

  Original title: "sleep" mode

  Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own

  Hello

  See if this information helps you, Vista and 7 work the same:

  "How to restore the default power Plan settings in Vista"

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  "How to solve a problem of Mode Vista or Windows 7 sleep"

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  See you soon.

• My norton 360 will not work after reinstalling. error 104 8504

  My norton 360 will not work after reinstalling. error 104 8504 norton crossed the settings there and said it was a problem of microsoft framework. any suggestions?

  Cannot be said with certainty, I do not use Norton, but a google found many reports like this, see - http://www.google.co.uk/search?hl=en&q=%22norton%20360%22%20%22error%208504%20104%22 for example.

  Usually like - http://community.norton.com/t5/Norton-Internet-Security-Norton/Error-8504-104/td-p/790378 or http://community.norton.com/t5/Norton-360/Norton-360-v6-Error-8504-104/td-p/672815

  If not, sorry, but after back with a little more information like the version of Norton 360, what OS W7 (starter home, home premium etc., 32 or 64-bit) and other clues that people Norton gave you as that "framework"? (For example .NET). The more information the better. So I hope someone can help.

  Good luck.

• I need help download microsoft NET frame model 2.0 on my computer so that my Lexmark 5500 printer will not work correctly.

  I need help download microsoft NET frame model 2.0 on my computer so that my Lexmark 5500 printer will not work correctly.  Please call me at the

  Thank you
  John Robinson

  Original title: hardware device

  The lies of failure with your method of installation of the drivers / software, you install using a Lexmark CD or download from Lexmark support?

  http://support.Lexmark.com/index?ProductCode=LEXMARK_PRO5500&page=product&locale=en&UserLocale=en_US#2

  NB there is also a firmware update

• HP LaserJet 1015 printer will not work on Windows 8

  I have a HP LaserJet 1015 printer will not work.  Used with Windows 7 and it works very well, it will not work with Windows 8. Nothing came out.  I used all the devices, coil, etc that they had and was able to find.

  You can download the latest drivers from the following link for Windows 8:

  »	Microsoft Windows 8 (32-bit)
  	»	Microsoft Windows 8 (64-bit)

• ScanDisk will not work after being planned in Vista

  Click on: drive > properties > tab.click Tools check for errors and check the two boxes.to automatically fix the file errors.and to check and recover bad sectors.reboot.no scandisk.just directly in windows.it it rub the simple 3-step windows scan breast... but not the full scan that I'm wanting.this is the only pc I've seen who has this problem , and he always does after a complete restoration of the original image.

  * original title - why the schedualed error checking is not working after reboot, (win ista home premium 64-bit) *.

  Hi magicman77,

  1. you try to perform disk error checking on the drive on which Windows is installed?

  I suggest you to schedule chkdsk /r to reboot following the steps mentioned below and check if it helps:

  a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  b. type the following command and press ENTER:

  Chkdsk /r

  c. When you are prompted to schedule chkdsk at the next reboot, type 'Y' (without the quotes) and press ENTER.

  d. restart the computer.

  WARNING:
  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Reference link: check your hard drive for errors

  I hope this helps.

• The product key you entered will not work with this edition of Windows Vista. You must run the Windows Vista Setup program or enter a Windows Vista business product key

  Product key bad for the wrong version?

  Hello

  Recently the computer in business inherited from a friend, very fast and very good. Regardless of the operating system no - geniue, is with Vista Business, while the thumbnail of authentication is Vista Ultimate. I took a screenshot of what it says when I put Vista Ultimate product key: (it does not appear if you are unable to use it: P)

  http://S13.PostImage.org/57nfn5pqv/vistareg.jpg

  He said: "the product key you entered will not work with this edition of Windows Vista. You must run the Windows Vista Setup program or enter a Windows Vista Business product key."

  How would the installation of Windows Vista? My files would still be there when you need him? My drivers would still exist? No matter what to get deleted or become unusable? He would return to SP1? Any response is welcome.

  You can order form of the manufacturer's recovery media.

  The reason why the system as non-authentique shows currently is using a license in Volume KMS - these licenses must be re-activated at least every 6 months by connecting to the KMS user license activation server.

  It will require a reformat and reinstall whatever you do, unless you can connect to the KMS - Volume media server cannot be upgraded under normal conditions.

• "The product key you entered will not work with this edition of windows vista. You must run the windows vista Setup program or enter a windows vista product key. »

  I bought a laptop HP three years ago in Dubai, now I am in India, my family problem does not activate windows vista and also use it now, I try to use but asked the system to activate product key not found the product key at the bottom of my laptop I enter the product key but the system says "the product key you entered will not work with this edition of windows vista.»  You must run the windows vista Setup program or enter a windows vista product key. "In my company sticker a HP laptop, it says" Windows Vista Home Premium, also found in computer ownership 'Windows Vista Ultimate' and as low property said: you must activate today and return their product ID: 89580-014-0000025-71152, but in my laptop near the product key, wrote a different number which is "89580-014-0000025." what is the problem and how to solve that advice me please. ""

  Hello

  You can use this Recovery Partition to reinstall Vista to his new condition with the right edition of Vista.

  This recovery partition was photographed on your hard drive by HP during the manufacturing of the factory.

  You press F11 on startup to start the process of recovering back to factory settings.

  Here is the information about HP.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  If the recovery partition is damaged, you can buy HP's Vista recovery discs for a small fee.

  If HP's Vista recovery disks, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon

• HP Photosmart premium c310, Windows 7 (64 bit) series will not work afterit is turned off and then on again

  I have photosmart all-in-one c310 printer and whenever we have a power outage, the printer will not print at startup power upward. I have spend hours trying to download drivers or updates and check the printer that says it's fine and the computer that says it can't find the driver. The last 2 times I finally got running again, but I did something different every time and I don't remember what it was. I just spent 2 hours on a hamster wheel keeps back me for a download, after you download it twice, I finally understood was the SAME download (the 3rd time I was directed here) and the printer STILL does not work. I'm pulling my hair out and I'm about to throw this worthless piece of scrap metal by the window. Help!

  Are you connected wireless? If so, you will need to reconnect the printer to the network of the SCW wireless on the printer itself. When you have power, he can hit just the printer off of the network from the router and just reconnect.

• HP 6520 will not work after changing the black ink cartridges

  Changed the cartridges and now black ink will not work. This is the second or third time only to change the cartridges - did not have a problem before, but of course, it is while the printer was still under warranty. It is now about a year and a half.

  I used all the suggested diagnosis - head cleaned, head aligned, etc, etc, etc, and nothing has helped.

  The black cartridge worked after the swap, but with a few lines do not print or missing--now produces almost nothing.

  Cartridges color was wonderful at the beginning of the troubleshooting process, but now they're starting to not look right - with spare no effort to correct the print head, he seems to be making it worse.

  Suggestions?

  @scrdagain

  I will send you a private message (departure from the envelope at the top on the right)