Do not start satellite A300-1AK after Win Vista update

Similar Questions

• Created recovery disc is ok, but does not start Satellite A300

  Hello
  as the title suggests, the disks fail to start, details below formatted for reading easier (I hope :))

  -All-new series Toshiba A300
  -J' have created a disk of restoration with the toshiba utility, there was no error, the files are there but the drive seems to be unbootable.
  -This happens with both attempts, I made, using Verbatim r and Sony + R media.
  -The recovery disks will NOT start on my desktop system either.
  -L' laptop starts fine with a couple of distributions Linux on CD - R.
  -J' use F12 to tell the laptop to boot from the DVD.
  -J' have much experience dealing with the LiveCD, bootable disc burning, etc., so I'm inclined to think there is a problem with the toshiba utility.

  Any help will be much appreciated. Thanks in advance.

  Hello

  There is certainly nothing wrong with the Toshiba Recovery Disk Creator.
  I burned the recovery disc too. Once it failed because I did not use fully compatible DVD. Then I tested it with TDK - R and everything went well.
  No errors, nothing. Finally, I booted from the DVD and could reinstall the OS too.

  I presume that you should check the other DVD.

  Good bye

• Re: Satellite A300-1LT - after display driver update, I get an error message

  Hi all,

  I have A300-1LT PSAGCE and a update my toshiba Download Center display driver.

  ATI
  Type display driver
  Mobility Radeon HD 46xx/45xx/43xx subtype
  Size (KB) 108950
  Version 8.611
  Model Satellite L550, Satellite L500, Satellite A300, Satellite Pro A300
  Operating system Windows Vista 32-Bit

  When I reboot laptop computer error showed:

  "The Catalyst Control Center is not supported by the version of the driver for your graphics to enable. If you please update your ATI graphics driver or enable your ATI card using the display manager. »

  Cannot find Manager displayer have only man of color. What should I do?

  Help, please!

  Thnx

  Hello!

  Well, for me it looks like you didn't uninstall the old display driver software. Before installing a newer version, you still need to delete the old version. So go in Control Panel > software. Select ATI display driver software and remove it. After restarting the laptop, you must clean the Windows system using CCleaner (Google is your friend to find it). Restart again and after that, you can install the latest version of page of Toshiba.

  I hope this works.
  Moreover, what graphics card do you have?

  Good bye

• A SCREEN BLUE, COULD NOT START WITHOUT HDD FOUND, AFTER WINDOWS XP UPDATE IN FEBRUARY

  Like many of you, after the updates of February I was not able to start my laptop.  Safe mode does not work and when I tried the solution accepted since the recovery/Repair Console, I got a message saying "Setup cannot find hard disk units installed."  After hours of searching for a solution, I finally thought to it and now everything starts very well.  For those of you are having similar problems, here's what I did...

  (1) visit this site: http://techrena.blogspot.com/2008/10/how-to-install-your-own-wndows-xp-in-hp.html and follow the instructions for the BIOS.

  If this link does not work for your computer, try this one: http://techrena.blogspot.com/2009/01/integrate-your-own-drivers-or.html

  Then, insert your Windows installation CD and when it loads, press R to repair.  Then follow these instructions:

  (2) select the option for C:/Windows

  (3) type this command: CHDIR $NtUninstallKB977165$\spuninst

  Press ENTER

  (4) type this command: BATCH spuninst.txt

  Press ENTER

  (5) type this command: systemroot

  Press ENTER

  When 6) complete, type this command: exit

  (Most of the instructions above have been found on this thread: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1/)

  If your computer did not come with a Windows CD, you can make a CD for recovery of your choice or borrow one from a friend.  For the purposes of recovery, I don't think it's important if you have XP Home, Pro, etc., any CD will work.  There are websites online that will show you how make a recovery CD... and even provide the files... it takes just a little research.  Unfortunately I did not save the link for the site that I used: o.

  If for any reason, you are still unable to get your computer running and want to get your important files on your hard drive, I found this amazing, easy and free method.  Just download the OS and burn the ISO to a CD and then start on the CD and load the operating system (direct loading from CD - do not install) below.  You will be able to browse all your files and transfer them to a USB drive or burn them on a CD: https://help.ubuntu.com/community/LiveCD  certainly a good thing to keep on hand for future if nothing else!

  Apparently, it is a root virus (?) of some sort that causes the problem of update in the first place.  I scanned with every scanner I can think of and Nothing has been found on my system.  Does anyone know if there any instructions on how to find/get rid of the problem so that it does not happen?

  Apparently, it is a root virus (?) of some sort that causes the problem of update in the first place.  I scanned with every scanner I can think of and Nothing has been found on my system.  Does anyone know if there any instructions on how to find/get rid of the problem so that it does not happen?

  A rootkitTrojan horse, to be precise. References include:

  MSRC: Restart issues after installing MS10-015 and the Alureon Rootkit:
  http://blogs.technet.com/msrc/archive/2010/02/17/update-restart-issues-after-installing-MS10-015-and-the-Alureon-rootkit.aspx

  Backdoor.Tidserv [AKA Win32/Alureon] and MS10-015
  
  Backdoor.Tidserv does a very good job in this sense, particularly with the
  latest version (TDL3), which uses an advanced rootkit technology to hide its
  presence on a system by infecting one of the low-level kernel drivers, then
  cover his tracks. While that the rootkit is active, there is no easy way to
  detect the infection, and because he's so deeply in the core, most of the users
  don't see anything wrong in the system... Even worse, because the infected
  driver is critical for the system boot, Windows will not start in Mode safe
  either [after installing MS10-015 on an infected machine].
  
  http://www.Symantec.com/Connect/Blogs/Tidserv-and-MS10-015 [emphasis]

  TDSS rootkit silently owns the net
  
  TDSS rootkit 3rd variant is the last member of the family of rootkit Tdss is
  spreading rapidly all over the world. While a number of rootkits is just
  developed as a proof of concept, this is not the case. TDSS rootkit is well
  known for corporate antivirus because of his goal to get full control of the
  PC infected and using them as zombies for its botnet.

  During these years, he always showed a team of people behind it, which
  always applied advanced techniques often able to bypass antirootkit software.
  In fact, this last variant could be easily identified as the stealthy rootkit
  in the wild.

  This infection is having all the best rootkit MBR, the best of
  Rustock.C and the experience of the old Tdss variants. Result is an infection that
  is quickly spreading on the net and it is without being detected by almost every security
  software and 3rd party anti rootkit software.

  .. [20 Nov-09] terms no antirootkit is able to ignore the disk filtering
  technique used by Tdss rootkit but, even if it were possible, this rootkit
  could not be detected by file size cross check because size of the
  the original and infected files are exactly the same.
  
  http://www.Prevx.com/blog/139/TDSS-Rootkit-Silently-Owns-the-Net.html [emphasis]

  W32/Alureon-variants are frequently 'lost' by W32/FakeAlert, etc., infections; CF. http://blogs.technet.com/mmpc/archive/2010/02/24/if-it-calls-itself-security-essentials-2010-then-it-s-possibly-fake-innit.aspx

  NOTE: KB977165 for WinXP was 'shot' on 11 February. Although he remains available for a manual installation to the Windows Update Web site, it is is more "pushed" via automatic updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Scrolling touchpad satellite A210 disabled after Windows Vista update

  Last week, I did an update of Microsoft Windows. Sine that update I can't the Satellite to recognize its touchpad and the only driver updates work for a standard PS2 Mouse. I can no longer use the bottom and side of the Toshiba touchpad scrolling features. This disk I'm trying to rstore touchpad please?

  You can find the driver for the Touchpad here: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  First remove the driver from the control panel-> programs and features
  Then, download and install the latest version.

  If you have a Logitech mouse drivers or other mouse/keybiard 3rdparty drivers installed, remove those as well.

• After win 7 update at the start of my stops of the computer in Mode safe

  After win 7 update to start my computer continues to Safe Mode to choose (new) Win 7 or Vista operating system (old / deleted).  How can I fix it?

  Original title: win 7 start

  Click Start, type: msconfig

  Press enter on your keyboard

  Go to the Startup tab

  Select the entry you want to delete

  Click on delete

  Then set the time to '0'

  Then click on apply and OK

  Restart if prompted.

  ------------------------------------------

  If the problem persists, try the following

  Click Start, right click on computer

  Click on properties

  Under control panel home

  Click on "advanced system settings".

  Go to the Advanced tab

  Under Startup and recovery, click settings

  In the default operating system list, select Windows 7

  Uncheck the "time to display list of operating systems".

  Click OK

  Then apply and OK

  ---------------

  If it still does not respond, try the following:

  EasyBCD by NeoSmart Technologies would be your answer, it provides a graphical front-end to the BCDEdit Command line that makes it easy for you to set the boot settings and change the entries start on the new Windows Boot Manager.

  http://NeoSmart.NET/DL.php?id=1

• After that Vista update of my Satellite L40 won't start

  After automatic Vista update of my boot of t n for laptop and the screen is black. Using the F8 key I have the advanced startup options, but none of them helps. The screen remains black. Hard drive led is always off.

  I have Satellite L40. I restored the OS using Toshiba drive. All data has been lost. After 2 or 3 days, update has been installed again and I noticed the same problem. What can I do?

  Please help me!

  For me, there is only one option: disable the automatic update to Vista.

  By the way: when that happen, have you tried to boot the operating system in safe mode and roll back OS to an earlier time using System Restore tool?

• Single-pass does not work for Web sites after the last update of firefox

  Single-pass does not work for Web sites after the last update of firefox. This works in IE and Chrome and it works under windows (when starting the computer), but not with any website in Firefox.

  Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to SimplePass, you can use the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Then on the right, check the control on the right side of the SimplePass.

  You may need to exit Firefox and start it again before it takes effect.

  A little luck?

• How to partition Satellite A300 - 21 H with Vista?

  Hello
  I have a Toshiba Satellite A300 - 21 H with Vista and dual you want to boot with ubuntu linux. At present, there are three partitions, recovery vista 1.5 GB, 150 GB C and 150 GB E (with recovery of HARD drive inside). My ubuntu, I would like to partitions / and / Home (about 150 GB). Should I delete the partition E? I have my recovery DVD's...

  What is the best approach, I think that linux is only 4 partitions.

  > Should I delete the partition E?
  If you created the recovery DVDs, you can remove HDDRecovery and use the second partition for Linux. When you want to install once again just use recovery media created Vista.

  If you change the structure of the partition, no doubt, you will not be able to use saved image in this folder.

• Re: Satellite A300 - product key of Vista isn't more visible

  Hi all
  I use Satellite A300 laptop computer with Vista preinstalled OS.

  Due to a virus problem my system got crashed upward... so need to reinstall the OS... but my VISTA key at the bottom of my laptop is not visible now... is there a way to get my product as iam key still in warranty period...
  Thanks for the help in advance

  Suneel.

  Hello!

  If reinstalling Vista using a Microsoft installation disc you n t need this product key on the underside of the laptop. This key belongs to the preinstalled OEM version and t can be used with a version of Vista that you can buy in a normal store of the computer. This is why you must use the product key that comes with the version of Vista.
  OEM versions are available for manufactured goods.

  If you don t have a Toshiba Recovery disk you can order directly into a new Toshiba. Akuma already post the link to the workshop.

  Good bye

• I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  Hello, Pichon,

  If Windows Vista application unexpected activation

  On rare occasions, you may be prompted to activate Windows Vista on a computer that did not previously require Windows Vista activation or has already been activated successfully. For example, this may occur on a computer on which Windows Vista was preinstalled by an OEM installation or Volume licensing and are major hardware changes occurred, such as upgrading the hard disk and memory at the same time.

  If you are prompted to reactivate Windows Vista, you can do this by using the Windows Activation Wizard to:

  1. Click Start, and then click computer.
  2. Click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation area. If you are prompted for an administrator password or a confirmation, type the password, or click continue.
  3. Select the Windows Vista activation method that you want, and then follow the instructions.

  To avoid this problem in the future, obtain the latest service pack for your version of Windows Vista, either through automatic updates or direct download.

  To update to Windows Vista and prevent this activation problem does not happen:

  1. Click Start, click all programs, and then click Windows Update.
  2. Click find updates.
  3. As soon as Windows Vista found the updates, click the install updates button.

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  Activation fails when you try to activate Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2 on the Internet

  http://support.Microsoft.com/kb/921471

• Hi, I have 0xc0000142 error when I start the first pro after the last update, before that I had no problem playing first pro...!

  Hi, I have 0xc0000142 error when I start the first pro after the last update, before that I had no problem playing first pro...!

  Hello Gene,

  You may need to check this: Re: Premiere Pro 2015 won't open after the recent update

  Kind regards

  Navdeep Pandey

• Win Vista update problems - help on 31/05/13.

  I downloaded Win Vista updates, when installing updates, that seemed to be getting picked up in 15 of the 27 update.  If it stalls, should I try to download updates from windows updates again?  Now, the internet explore is dead and when I reconnected it in the internet it restarted the update where it left off.    Please let me know what I can do to get my updates again smoothly?

  Hi ARMinnesota,

  1. what happens when you open Internet Explorer?

  2 when running windows update, you get an error message or error code?

  Refer to the steps in the following Microsoft article and check if that helps.

   

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2: http://support.microsoft.com/kb/2509997

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services: http://support.microsoft.com/kb/906602

  Notes:

  
  The following steps include changing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

   

  CHKDSK: Data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

  Keep us informed on the status of the issue.

• After downloading Vista updates

  After downloading Vista updates and install them, I get the new updates icon in the taskbar. While they inspected the history update, I see where the update was installed. What should I do to get rid of him. It comes even when I restart my computer. I have administrative rights for this computer.

  Hello

  Updates are you referring?

  Try the steps and then check.

  Step 1:

  Run the fix of the article.

  Reset Windows update components.

  http://support.Microsoft.com/kb/971058

  Step 2:

  Follow the steps in the article.

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  See also:

  Updates: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

• My Satellite will not start after installing Vista updates

  My Toshiba satellite laptop does not start after the installation of updates. I get the Toshiba screen, then a screen that gives me two options. Start windows normally or repair windows. I tried both but you just Tousez in circles to the same screen.

  I didn't have any rescue CD or save a Vista CD with my computer

  Can someone help me. Do you have ideas how to run again.

  Thank you very much
  Christine

  Hello Christine

  Can you please tell us which laptop model you have?
  Did you start your laptop with F8?
  What happens when you click Repair option?

  Please give us more information.