After you install a Windows Update, my PC now request a password.

Similar Questions

• print DigitalPersona finger scanning does not work after you install the recommended updates

  My impression of digitalpersona finger scanning does not work after you install the updates recommended on my dell Vista

  Hello

  1. do you have an error message?
  2. are you referring to the print scan hardware or software scan print that was supplied with the device?

  Method 1:
  I suggest you to update the software DigitalPersona from the link below https://www.digitalpersona.com/support/downloads/

• Windows will work not day after I installed the windows updates.

  The next day, I installed the Windows updates, I turned on my laptop a short Vaio splash screen is displayed and a black screen comes up saying that "Windows couldn't start. A recent hardware or software change might be the cause. "I don't have the installation disc of Windows that it suggests to use the software is preinstalled.  The safe mode and last known good configuration and the start windows normally get Windows running.  It is simply scrolls a list of code and ends with a line crcdisk.sys, goes to a blue screen for less than a second, then goes to black screen.  All the help I could get to address this issue would be greatly appreciated.

   

  If Safe Mode doesn't work no and you don't have a Vista DVD from Microsoft, do a repair disc to do a startup repair or a system restore:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  http://eSupport.Sony.com/Perl/select-System.pl?PRODTYPE=1, 24,26,66,9,70,5,72

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  See you soon.

  Mick Murphy - Microsoft partner

• No standby on MacPro after you install the security update

  10.10.5 Yosemite system

  MacPro early 2009 (4.1)

  2015 security-006 installed by download file update

  Problem now:

  No Sleep Mode more via

  -Button at the login screen

  -Apple menu

  -Parameters in the Pref Pane

  -Shortcut

  This is what happens:

  Screen goes to sleep but

  -fans are always

  -HDs turn

  -Boot HD work sounds

  -small power light is not 'breathing '.

  What I've done so far:

  Resets do

  -Energy records Standard parameters

  -MSC

  NVRAM EXTRA

  Started in Mode safe

  Tested on a fresh user account

  Repaired access rights

  Results: No "standby"

  Secuity update version before was 2015-003 or 004.

  Sleep Mode worked without problem.

  I took the same file to update two iMacs (2009), an iMac (2014) and a MacBook Pro (2011) - no problem.

  Suggestions for Restore Mode features Eve for the MacPro would be great.

  Thank you

  Wipe the drive and reinstall OS X properly:

  Install or reinstall OS X from scratch

  Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Erase the drive:

  1. select in the main menu disk utility and click on the continue button.

  2. once the charges of THE select your boot volume (usually Macintosh HD) in the

  list on the left. Click on the Erase tab in the main window of THE.

  3. set the type of format Mac OS extended (journaled). If necessary, click

  Security and button all the option data from scratch in a single pass. Click

  the clear button and wait until the process is complete.

  4 leave FROM and return to the main menu.

  Reinstall OS X: Select reinstall OS X and click on the install button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible

  because it is three times faster than wireless.

  This should install the version of Mac OS X that you had installed it.

• Internet Explorer does not work after you install the kb2761451 update

  Original title: I downloaded the update and now Internet security security update kb2761451 explore does not open.  So I deleted it and Explorer opens.  This update is listed as important.  What should I do?

  The Explorer is 9.

  Hello

  Thanks for posting the question in the Microsoft Community!

  Internet Explorer stops working after the update kb2761451 is installed.

  The problem may occur if the updated components are corrupted.

  I suggest you follow the steps mentioned below:

  Method 1: Of reset Windows Update components

   

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: run the Update of the system analysis tool

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• I have a problem with the computer work is not correctly after you install the KB2753842 update.

  This update of windows has been installed automatically today (22/12/2012) as the (successful with this date) shows on the Page update.  Since that it has been installed, the computer is constantly read/write on the disc at 100% at all times (i.e. non-stop).  Performance is significantly degraded.  I rebooted several times, whenever the system shows the updates are being configured on tap-dwon and commissioning.  I want to reinstall the update because I think that it was not successful, even if the display update Page shows successful installation.  When I try to find and remove the update under the Panel of control-> program and features-> Windows updates, this update is NOT displayed (latest updates are 13/12/2012).  How can I remove and reinstall this security update?  It is a BIG problem at the moment.  Computer is almost non-functional.  Thnx.

  Original title: update security for windows (KB2753842)

  Nirmal S, thank you.  System Restore did the trick.  I restored prior update checkpoint and then the system automatically re-installed the latest update (which is one I had a problem with).  Problem solved!  My computer working again 'normally '.

  Also, I learned a few new things about the updates and restorations, so...

  Bravo for Nirmal S!

  Kind regards...

• Windows Vista's Aero theme will not work after you install a major update and reboot into Windows Automatic Update, can I fix?

  Update: Windows x 64?

  After I did a reboot the theme changed to Standard or Windows Classic theme.
  When I try to change the theme back there is no preview on the window and when I try to apply the theme, there's just the same thing.

  Hello

  also try to go to your site in manufacturere graphics or computer cards and find the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  You may also like to change how you receive updates for do you download this update problem still through automatic updates

  for any update you don't want to, make a right click on it and hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need or who have limited access to internet

• After you run microsoft windows update 8, I get an error message when I try to go to the libraries using the Explorer

  An update of Windows 8 running on my laptop. I don't know if it was successful or not, but I think that maybe not. Now when I go to the Solution Explorer to access my documents, music etc. libraries I get an error message saying "Documents / Video.library - ms is no longer ' I can always access your files goes to the icon of the drive C and drilling down, but why this library link does not work any more?

  An update of Windows 8 running on my laptop. I don't know if it was successful or not, but I think that maybe not. Now when I go to the Solution Explorer to access my documents, music etc. libraries I get an error message saying "Documents / Video.library - ms is no longer ' I can always access your files goes to the icon of the drive C and drilling down, but why this library link does not work any more?

  Hello

  See the following instructions to Update libraries and solve this problem.

  1. in the file Explorer , select the folder parent of libraries in the left Navigation pane.

  In the right pane click on the right button of the library of Documents, music, photosand videos by default, and select the Remove option. Click Yes to confirm the deletion.

  (Note: this will not affect the folders or files in this library)

  2. in the Navigation to the left side pane, click on the libraries of parent folder and select restore default libraries option.

  This will refresh the default libraries and should solve the problem.

  If you added all files for libraries folders by default, you need to add these records.

  Let us know the results.

  Concerning

• High CPU use/Slow Performance after you install the updates of Windows

  I run Vista Business 32-bit.

  After you install many Windows updates in the last few days, I've known very slow performance after the system worked for a while. Resource monitor shows 70-100% CPU usage, even when you run all the apps (that I know of). This makes everyhting grind to a halt, same trip that the mouse jerky movements. I ran several complete system with McAfee anti virus scans and not found problems (using the latest software). The detail showed the so-called ", PID4 NT kernel and system" using 18% avialable CPU capacity, but this process is not always shown to use much more capacity when the slow performance occurs. Nothing else don't use much capacity CPU, I see.

  More recently, the capacity of the CPU became crazy, jumping from zero to 100% usage in a back a suite oscillation. When I shut down and restart, performance improves, but erodes little by little over time.

  Is this a sign of a virus, or is it a problem with the recent Windows updates or some kind of conflict with my software such as McAfee? How do I tell me what to do? Anyone else have this problem with the recent Windows updates?

  Help!  Thank you!!

  McAfee applications (and Norton) are known for not not upgrade (or uninstalling) itself.

  1. download the McAfee Consumer Product Removal, save it to your desktop tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. now run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  NOTE: Step #2 McAfee fix run the removal tool, you have already downloaded in my step #1 above.

  4 IMPORTANT! => After the reinstallation of the McAfee application (step #3 of the McAfee fix), manually & repeatedly updated the McAfee application, until you get a prompt "no update more".

  5. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  6. OPTIONAL: For good measure, pen also Internet Explore (only) to http://support.microsoft.com/kb/971058 & race that secure it in DEFAULT and modes and AGGRESSIVE. [1]

  7 restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I have windows 8 in my computer toshiba laptop. After you set up windows for the updates it says «restoration of the changes...» Impossible to install the important updates'... What do I do?

  I have windows 8 in my computer toshiba laptop. After you set up windows for the updates it says «restoration of the changes...» Impossible to install the important updates'... What do I do?

  Hello

  Please, try the suggestions mentioned here and see if they help you:

  http://www.thewindowsclub.com/failure-configuring-Windows-updates

  Hope this helps, good luck :)

• Cannot access the network after you have installed the Windows updates

  original title: Windows update and Acer Aspire M3201

  Hi, I have a problem with my Acer Aspire M3201, which has Windows Vista on it. The system has installed the Windows Update automatically, so I can't access the internet and home network more. So I restored the previous update windows, then I can get into the internet again. A week later the update windows again but this time somehow corrupted previous restoration, I cannot restore and can not enter in the internet. I bought Windows 7 to upgrade my Windows Vista computer. The upgrade went OK game, but it was also installed the updateautomatically, and I cannot yet access the internet web browser of screws, but the command, I can ping any web site as www.cisco.com. Please help me. Thank you.

  If you updated that could trigger it, you can do is to uninstall and avoid installing it by hiding the update in Windows Update.

  Click Start, type: see installed updates
  Press enter on your keyboard
  Look for the update in question, no it click on, then click on uninstall.

  Restart your computer

  Open Windows Update, select the update, right-click and click Hide

  See also: Troubleshoot network Windows 7 http://clkon.us/bJtkA0

• After you have reinstalled Windows XP my computer said that having no audio device. How to re-install a new audio device?

  After you have reinstalled Windows XP my computer said that having no audio device.  How to re-install a new audio device?

  A. Si you have the sound driver file install it normally

  or
  B. extract the files to a specified location
  go to Device Manager
  find the audio device with the yellow mark
  Right click and uninstall or update driver
  Select Advanced Setup
  the location of the file
  and follow the instructions

• After you have reinstalled Windows XP, I can not install any service packs.

  Could not load service packs windows xp

  I reloaded windows xp pro, and now I can't get service packs to load. With packages of sp, I can't get the flash drives, and so on. Any ideas out there?

  Hello

  Service Pack2 (if you need it) can be obtained here.

  http://www.Microsoft.com/download/en/details.aspx?ID=28

  Service Pack3 can be obtained here.

  http://www.Microsoft.com/download/en/details.aspx?ID=24

  Have you tried windows update? If Yes, see this...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/error-after-fresh-install-of-Windows-XP-Pro/a617bb44-9944-4338-b82e-c18372ad986f

  If the foregoing is not useful so can I suggest that you be a little more specific on what is blocking you? Tell us what you do to try to get the service Pack installed, and what happens when you do that, including error messages verbatim etc.

  Tricky

• Getting fast to install Windows Vista SP1 after you install successfully.

  Original title: message update for something, I've already updated.

  I keep told that there is an update due after that I have already installed it. He tells me that I need to install service pack 1 when it is already installed. Help, please.

  Hi Billy,

  Thanks for posting your question in the Microsoft Community forum.
  Description of the problem, I see you have found fast to install Windows Vista SP1 after you install successfully.
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  Windows Update or Microsoft Update repeatedly offers the same update
  http://support.Microsoft.com/kb/910339

  Note: This link applies to Windows Vista.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  For more information, please see the link.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Why my virus program esetnod 32 guard tell me that my system is not updated after you install the update of all the nessary?

  Why my virus program esetnod 32 guard tell me that my system is not updated after you install the update of all the nessary?

  I have download all necessary Windows 7 updates, but they are not installed. Can anyone help?

  Kind regards

  Mitch

  Hi Mitchell,

  Please uninstall and reinstall the ESET program and check if it solves the problem:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  For further assistance:

  ESET knowledge base

  http://KB.eset.com/esetkb/index?page=home&locale=en_US&option=None

  Please post us with the result.