AfterEffects using objects null with key to scale images

Similar Questions

• Using a click box to display four images

  Hi, is it possible to use one box of four images - one click at a time?

  What version do you use? It's very easy with Captivate 9: create 4 reports to the same "object", each with one of the images. No need to actionl variable or advanced, just triggering action 'Go to Next State' and you can click on forever on this box click to view images in a loop.

  If you are on an earlier version, take a look at this blog, there's a small tutorial:

  Blog after Posterous? -ClickClick - Captivate blog

• Multi table query with key foreign null.

  Consider the following tables

  create table student (
   id number not null,
   name varchar2(80),
  primary key(id)
  );
  
  create table course(
    id number not null,
    subject varchar2(120),
    primary key(id)
  );
  
  create table class(
   id number not null,
   name varchar2(80),
   day number,
   course_id number not null,
   primary key(id),
   foreign key(course_id) references course(id)
  );
  
  create table student_course(
    id number not null,
    student_id number not null,
    course_id number not null,
    class_id number,
    primary key(id),
    foreign key(student_id) references student(id),
    foreign key(course_id) references course(id),
    foreign key(class_id) references class(id)
  );
  

  The student may enroll in a course and then a Professor assign to a class, that's why foreign class_id key isn't a constraint not null.

  What I want is to write a query so that the student can see all courses, it is registered for the class, that he has been assigned and the day of the class, but the report should include courses where the student is not assigned to a class again.

  I wrote the following query.

  select
   course.subject,
   class.name,
   class.day
  from
    course,
    class,
    student_course,
    student
  where course.id = student.course_id
  and class.id = student_course.class_id
  and student_course.foititis_id = get_foititis_id
  

  However, I only get the lines where the student_course.class_id is not null.

  I tried various combinations of coalesce, nvl, decode in both the select statement and where statement, but the results where garbage.

  No idea if such a request is possible?

  Thanks in advance for any help.

  Hello

  Thanks for posting the instructions CREATE TABLE.  Don't forget to display instructions INSERT for a litle sample data and the results desired from these sample data.

  odysam wrote:

  ... I wrote the following query.

  1. Select
  2. race. Subject,
  3. Class.Name,
  4. Class.Day
  5. Of
  6. Of course
  7. class,
  8. student_course,
  9. Student
  10. where course.id = student.course_id
  11. and class.id = student_course.class_id
  12. and student_course.foititis_id = get_foititis_id

  However, I only get the lines where the student_course.class_id is not null.

  I tried various combinations of coalesce, nvl, decode in both the select statement and where statement, but the results where garbage.

  No idea if such a request is possible? ...

  It's logical.  The condition on line 11

  Class.ID = student_course.class_id

  will not be TRUE is student.course.class_id is null.

  As Someoneelse said, looks like you need an Outer Join.

  Inner joins, as you use above, produce results only when a row in a table has one matching row in another table.

  In this case (as far as I can tell without data sample or results), you want to display the rows in a table with their matching rows When THERE is a MATCHING ROWS, but you want to show each row of the first table in any case, if corresponding lines.  This is an outer join.

• Re: oracle.jbo.InvalidOwnerException: Houston-25030: retail entity JobSheetDetails with null line keys cannot find or invalidate its owner entity

  Hi all

  I use JDev11.1.2.3.0

  When I am inserting into the child line I'm getting oracle.jbo.InvalidOwnerException: Houston-25030: entity JobSheetDetails detail with the null row key can not find or invalidate its entity owner exception.so how can I overcome it.can someone help me please.

  Thank you

  G.Shilpa

  Hello

  Apparently, you insert a new line that has no valid parent. This happens if you create parent lines and retail at the same time and the detail rows are inserted first. Not sure this is the case for you, but the absent parent holds.

  http://docs.Oracle.com/CD/E28280_01/Web.1111/b31974/bcadveo.htm#CEGJAFCF

  Frank

• Plans test stops with the error 'Array with key "BB0050569F23260000-null" not found ".

  Dear gurus, I hope someone can help me with my problem.

  My SRM 4.0 Lab:

  • two servers vCenter v.4 + SRM 4.0 + EMC_Celerra_Replicator_SRA

  • two VSA Celerra with replication of work

  • two ESXi 4 servers connected to vCenter Server

  When I am trying to perform a recovery of the Test plan, I got the error 'Array with key as NULL "BB0050569F23260000" not found. "

  I guess it's something with recovery VSA, but cannot move forward, as I am a beginner in storaging.

  I've attached screenshots of the box of diag "Configure storage arrays", maybe this will help.

  Thanks in advance!

  without the hotfix SRA, you must rename your celerra VSA on the two sites do not contain not "-" in their names

  Itzik Reich

  Solutions architect

  VCP, VTSP, MCTS, MCITP, MCSE, CCA, CCNA

  EMC²

  where the news concerts

  If you find this information useful, please give points to "correct" or "useful".

• Computer HP laptop slim 500 GB HARD drive: used for HP laptop HARD drive upgraded to Win 10 Pro with key now stuck after HP Drive Encryption Login

  I bought a portable hard drive used HP for the upgrade of my Lenovo G550 with ugraded CPU with Intel's CORE DUO T9300 2.50 ghz

  (HP hard drive: computer laptop slim drive HARD 500 GB SERIAL ATA DISK DRIVE S/N W627S9NL P/N 756731-001 MFG Seagate Technologies DOM 8 / 2015)

  I was happy to see that the hatd drive had already installed because Windows 7 I had bought already separate legitimate Windows 10 Pro license key for the upgrade. I was able to go online and download the upgrade of Windows 10 and used my purchased license key to activate my updated.

  While doing the installation, there are some HP software that was still on the hard drive. I thought it would be good to have some additional security protocols, so I also installed the WinMagic Securedoc Bootloader v1.2.12 and saved the drive encryption HP with the security issues and password for secondary access.

  10 Windows has been activated and everything was beautiful. But when I restarted the laptop, I put my password for windows and then it goes to this screen of disc HP encryption rises. I put the password and it is accepted - and then the screen turns white... not offshore... jblank TEU with a cursor flashing that doesbn can't react to inputs.

  I tried leaving it for a day or so and still nothing.  There is nothing I can change in the configuration of the BIOS that works so far.

  I also tried Reimage download on USB and re-creation of the sequence of boot, but not good. Even tried a boot drive, but nothing there either. I'll try again.

  I don't know where to go or how to get beyond the screen of HP encryption.  I am pretty good at following directions, I don't know coding, but may do what you suggest to help me fix this problem.

  Can you help me?

  Sorry... I missed the part that you have a license Win10.  I thought you were trying to activate 10 using the OEM HP license and causing problems.

  I do not use HP encryption applications - as having recently completed a career in the InfoSec, I personally focus together on the encryption of the PC to be laughable-, but my guess is that you are basically out of luck.

  If it was my drive, I WIPE the drive of all its content and then again install Win10.  A good product to do i.e. DBan: http://tiptopsecurity.com/how-to-securely-wipe-your-hard-drive-with-dban-erase-your-data-for-good/

  Once your disc is clean, then simply install Win10 on it.

  That said, with a bit of luck, one of the HP EXPERTS will probably come along and tell you how to get around their encryption.

  Good luck

• Mac with bootcamp to format and reinstall windows, can I use the same cd key and product?

  I want to reformat my mac...

  I want to reformat my mac with bootcamp and I want to reinstall windows. can I use the same cd key and product? or do I have to do something with the current activation? Windows will recognize that it is the same computer after I repartition it?

  I want to reformat my mac with bootcamp and I want to reinstall windows. can I use the same cd key and product? or do I have to do something with the current activation? Windows will recognize that it is the same computer after I repartition it?

  If it worked the first time, there is no reason that it will not work the second time on the same computer, as long as the Windows 7 is a full version.

  If this is an upgrade version, you must have the qualifying OS installed and enabled before you upgrade and it will work.

• How can I use my valid product key XP Pro SP2 with my drive OEM XP Pro SP3 and still meet the requirements of Microsoft Genuine?

  I had to wipe my hard drive due to a battle lost by a virus. My installation of XP Pro SP2 disk disappeared, so I used my XP Pro SP3 OEM disc to install Windows. When I used my valid product key XP Pro SP2 I was shocked to receive an invalid product key. I always ran Microsoft Genuine product and would like to know how to reach a genine advantage accreditation with my present prediciment. Any help would be appreciated and we thank you in advance.

  Hi KevinDitner,
   
  I'm afraid, but you can't do that. Your product key Original Equipment Manufacturer (OEM) should be used only for the laptop which came with it.
   
  You can get the CD of Windows XP Professional Service Pack 2 (SP2) by contacting the Support team customer Microsoft.
   
  More information on:
   

  How to replace Microsoft software or hardware, order service packs and replace product manuals

• using friends disc with my product key

  If I reinstalled vista on a friends disk to my laptop which was pre-installed with vista that crashed, I'd be able to use my original product key?

  Well, the worst case, you will need to call the manufacturer of the laptop computer (your own) and ask them to send you a set of recovery/restore CD/DVD - if you don't have a lot to lose.  Go ahead.

  When you say, 'crashed', what do you mean?  Unless the hard drive is dead (physically) then you should be able to use any restore process has been integrated into the system (unless it's a CD/DVD set you have obtained/summer supposed to do and you lost TI/never fact).

• Replace with Win 7 32 bit XP Mode using the oem license key?

  We have some old software that requires a 32 bit OS.  There is no way around that it will never support 64 bit, but must use it occasionally.

  Currently, we run with XP Mode installed Windows 7 Pro 64 bit.  As Microsoft ends support XP on April 8, 2014, we want to move a virtual machine to Windows 7 32 bit.

  Is it acceptable to use the same license key OEM on the bottom of the laptop to install Windows 7 32 - bit in Virtual PC instead of the XP Mode or do we need to buy more licenses of Windows 7?

  Windows Virtual PC can be used independently of Windows XP Mode, but as noted, if you use another version of Windows such as Windows 7 32 bit, you will need to purchase an additional license. The license at the bottom of your laptop is already linked to the host machine on which it is installed.

• I bought the DC of Adobe Acrobat pro and completed the info online, but when I use the cd with the product code key it will not take the code?  What do I do then?

  I bought the DC of Adobe Acrobat pro and completed the info online, but when I use the cd with the product code key it will not take the code?  What do I do then?

  Thanks Anubha Goel, final I got it to work... The serial number in the physical box that you buy in the store wasn't the number for the software.  It was the serial number in the cloud, very difficult to know when you see a serial number in the box with the Cd online.  But thanks for the reply to my post. I'll be in offline mode after clicking on answer...  Thank YOU Ana Maria

• Can I use several nulls in a unique key column

  Happy Pongal (SANKRANTHI) friends hi... Can you please help me in this regard...
  
  Can I use several nulls in a unique key column?

  Yes you can have

• Strange question by using a layer to key as hidden by approach

  Hello world

  I have a strange problem on a model that I work with and because of the way his game upward and the pre comps etc, I don't know yet how to ask questions!

  So, please excuse the next long-term, attempt to explain:

  (1) to start:

  I have a comp with 3 layers of images. A background image Moving 4 K of video blocks, interpreted at 25 fps. A clip of R3D of one of our ships, the camera on a tripod and the ship "Waggling" kept a little up and down - in RAW mode for own overlay. A duplicate of this layer, used as the color corrected layer.

  I have a comp that contains the raw footage, key and then set it to the color corrected images below, Alpha matte.

  

  Above is the settings and exit from the squadron of ships.

  It is then precomped and engine lights, streaks and propellants etc. are added with Null objects, lights, optical flares including:

  

  at this point, everything is great, it is then more precomped in a new comp, where it is placed above the background layer - and here is where the problem occurs. It's almost as if the trackmatte is a frame or two behind the color layer:

  <-note the blue edging to the blue screen.

  I followed these layers and back up the precomps, and I can't understand why this happens? I guess I made a really stupid mistake and will gladly apoligize publicly when I find it!

  I don't know what else I can send to help understand this (keyframes on the trackers above there, and the precomps of drag to position and scale change over time on the layer of ship in the final model.) If I pull the precomp ships in the final model as a new layer - the problem remains. If I double click to open the layer of the vessel, the question is not visible.

  Well, that's it. Thank you all.

  Stone

  Why did you settle your final model to 29.97 FPS rate?

• Can I use my Windows 7 key refuse on a new computer

  After 4 years on a new laptop with Windows XP preinstalled, it was able to live usage conditions useage, being that student on a level 3 course HE computer is an essential tool.

  When Windows 7 is released, I don't a not jump directly into it as Windows XP always lived to its needs, but a few months after Windows 7 was released, it was time to update in order to track performance and safety more with Windows 7, offering more features that it was difficult not to be upgraded. So I got out a got a copy of Windows 7 Home Premium (32-bit and 64-bit). After that installation of the difference was clear, it was worth the investment.

  Recently, this computer gave up finally to go and has since been replaced by a custom built Tower currently using Windows XP Professional SP3 but it simply not the same thing, because once you upgrade to 7 you never want to go back and still currently the object of a student full time I could opt to buy a 2nd key at the student rate, but why give up what works already?

  More to the point it will be possible to use the same product key to activate Windows 7 even on the new computer? I understand also manual activation may be required.

  Yes, you can transfer your license of Windows 7 to the new computer, but you may need to reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• If you select value of LOV gets this oracle.jbo.InvalidOperException: No. JBO-34014 no child node found for line with key:oracle.jbo.Key when inserting line

  I use JDev 12 c on Windows 7 Pro

  I do a CreateInsert in ADF button on af:table. The model is set up so that T1 is one to many with t2, t2 is one to many with t3.

  I have recordings in t1 and t2, and trying to insert a record into t3.

  After I click the button, two of the three PK columns have values of t2. The third column is served by LOV. I open the LOV and select a value, and I get this exception:

  oracle.jbo.InvalidOperException: Houston-34014: no child node not found for line with key:oracle.jbo.Key [79449 Xnnnn-nn-X-nnnn null] under parent node: root

  at oracle.jbo.uicli.binding.JUCtrlHierBinding.bringNodeToRangeKeyPath(JUCtrlHierBinding.java:875)

  at oracle.adfinternal.view.faces.model.binding.FacesCtrlHierBinding.bringNodeToRangeKeyPath(FacesCtrlHierBinding.java:121)

  at oracle.adfinternal.view.faces.model.binding.RowDataManager.setRowKey(RowDataManager.java:131)

  to oracle.adfinternal.view.faces.model.binding.FacesCtrlHierBinding$ FacesModel.setRowKey (FacesCtrlHierBinding.java:951)

  at org.apache.myfaces.trinidad.component.UIXCollection.setRowKey(UIXCollection.java:553)

  at org.apache.myfaces.trinidad.component.UIXTable.setRowKey(UIXTable.java:768)

  at org.apache.myfaces.trinidad.component.UIXCollection.broadcast(UIXCollection.java:188)

  more of the stack trace was stopped for brevity.

  I've seen other posts related to this exception but no solid answers. I tried a few suggestions but nothing worked.

  If I remove the 3rd key I can insert a line, but on the second row, I get an error indicating that the primary key violation. It's like the page checks the constraints of the entity before the validation.

  Insert in this table works fine in the tester model.

  Thank you

  Dave

  And by LOV you mean: af:inputListOfValues?

  It usually works within the af: table if you VO with composite key.

  Maybe you can set ChangeEventPolicy = none on your iterator, but it will probably not help.

  Dario