Similar Questions

• Apache httpd cannot add configuration properties 'Agent error. "

  Hello
  
  I changed the conf file and when I try the link http://localhost: port/server-status I am able to view the status of the server.
  
  However by adding in hypric HQ - configuration properties, I get the error message "the Agent error: could not open Windows Service: Apache2.
  
  Here's the Setup: in
  General properties > chemin_installation > c:\ < path to app\apache
  Configuring properties > < IP address of the machine > hostname
  port < port I provide everything by logging into the application >
  path Access/Server - status
  
  By clicking on OK, I get the error
  
  Can anyone help please as I was thinking about a solution for the past 2 days.
  
  Thanks in advance.

  I had the similar problem because my windows service named apache2. 2 instead of Apache2. Please go to Panel--> Services and check your windows for Apache service name.

  Thank you
  Lorenzo

  Post edited by: Lorenzo

• FireSight/User Agent Error: [2201] - login information from IP to IP report failed after TIME [a call to SSPI failed, see inner exception.]

  We have a system of FireSight with a version 5.4.0.5 Virtual Data Center and several ASA devices. We have set some user Agents for the session and closing of session servers MS AD user logon information and met 2 problems:

  (1) all servers user agent (Windows server 2008R2/64/SP1 and Windows server 2012R2) report error 2201. They can pull the AD server logon information correctly and export the correct user card, can communicate with the virtual data center, but just cannot send data to it. Meanwhile, a user on the Windows 2008 STD/SP2 Server Agent works perfectly. Have you tried 3 other servers, 2 versions of the User Agent, en - us locale and 2 versions of .net. Nothing has changed.

  (2) we prefer to have only 1 User Agent but 1 User Agent supports 5 servers DC Max. We set up a central AD server to register the security logs of all servers of ads with success to his 'Reported events' event log file and set the User Agent to extract data from this central AD server. User Agent shoots the opening session, but only events folder "Windows Logs - security", never "reported events." The User Agent is designed from "Windows Logs - Security" read-only?

  2201.gif

  

  [2201] - report of the login information of the USER-AGENT-SERVER to 10.xx.xx.xx failed after the 14/07/2016 09:08:55. [A call to the SSPI failed, see inner exception.].

  This problem is known.

  Please uninstall the update from Microsoft

  KB3161606 and KB3161608

  After inspection, the question seems to be a specific change to the default Cipher Suites:

  https://support.Microsoft.com/en-us/KB/3161639

  There is created for this bug.

  https://BST.cloudapps.Cisco.com/bugsearch/bug/CSCva32331

  Rate if helps.

  Yogesh

• Foglight Agent error manager and Agent infrastructure

  I get the following in the Foglight Agent Manager error message:

  ECHO myWindowsAgent > com.quest.remoteos.SystemMonitorImpl ERROR [Quartz-1] - unable to connect to . No data has been collected.com.quest.glue.api.services.RemoteConnectionException: a connection could not be established

  Also when you try to add a single host to remotely monitor I get the same error message.

  I checked the credentials and they are correct... any ideas how to solve this problem?

  See if this article helps you, as he mentions it exactly the same problem (3 types of problems, it's too long to copy/paste).

  https://support.quest.com/SolutionDetail.aspx?ID=SOL92051

  Also, please check the release notes troubleshooting section because it may be a problem getting WMI wogs.

  http://eDOCS.quest.com/Foglight/567/files/CartridgeForInfrastructure_567_ReleaseNotes.html

  Troubleshooting

  This section provides a list of references that deal most often face questions about remote connectivity, which allows easily using the information provider knowledgebase or Foglight documentation for troubleshooting:

  • To check the WMI connectivity using a built-in utility for Microsoft Windows, see http://technet.microsoft.com/en-us/library/cc180684.aspx
  • To troubleshoot WMI class access permissions, see http://blogs.technet.com/b/askperf/archive/2007/08/14/wmi-troubleshooting-permissions.aspx
  • For more information about connecting WMI in Windows Server 2003/Vista and later versions, see http://msdn.microsoft.com/en-us/library/aa822854 (VS.85) .aspx
  • For WMI troubleshooting tips and techniques, see http://msdn.microsoft.com/en-us/library/aa394603 (VS.85) .aspx
  • To fix these problems that may occur when you connect the WindowsAgent infrastructure to a remote host, see the section "Windows-specific Configuration > troubleshooting Windows Agent questions" in the Setup Guide of the Agent Managerof Foglight.

  Golan

• Cisco NAC Web Agent error.

  Anyone encounter this error on the Cisco NAC Web Agent before (see table)? I am setting up Cisco NAC Aplliance in Out-Of-Band gateway mode virtual for the deployment of Unified Wireless using the WLC. Grateful if someone can help to inform of what could be the cause of the error. Thanks in advance.

  This means that the CAM has not received a SNMP trap for this MAC address.  Check that the WLC is configured to send traps to the CAM: http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/47/cam/m_woob.html#wp1290626

  You can see if the cam with got a trap for a specific MAC looking under OOB management > devices > discovered customers.

• API clean access Agent error

  I get an error with the Agent access own version 3.5.13. My University requires that the Agent access to connect to their wireless network.

  When I enter my login information, you immediately receive an error. The first error message is displayed in a pop-up window indicating:

  "Windows API error

  An error has occurred during the call to the function most recent Windows API.

  Error number = 87

  Error = the parameter description is incorrect. »

  After I click 'OK', I get an error message in the windows Clean Access Agent stating:

  "Network error."

  Detail: The parameter is incorrect. [87].

  Here are the details of my PC: laptop Dell Inspiron 1150 w / 512 MB RAM

  XP SP2 Home Edition

  Internet Explorer 7 beta 3 (public version)

  Office 2007 Beta (official Beta Tester)

  .NET framework 1.1 SP1 with KB886903

  .NET framework 2.0

  All the critical updates Microsoft XP

  I used an older version of the Agent access own without getting this error.

  Y at - it a newer version that can fix my error? If Yes, where can I download it?

  IE7 Beta is the question. You will not be able to get through the CCA through the agent until you remove IE7 beta or an Agent updated the CCA is released supporting it.

  About an agent is updated, it should be uploaded through your CCA server, rather than directly.

• update of Windows 8 agent error code 800f0922

  I need help I tried to fix my windows update agent for more than a month, but I can't. I restarted my whole system to original windows settings 8 to cause of virus, the only things I kept were peak and documents. After that my windows update agent no longer works. It keeps telling me that it must be updated I have the update several times, but I now get the same error message and it checks the updates. I tried to do another restart my system to see if that would solve the problem but I still have the same question. I tried fixing it through the resolution of the problems, and it is said that the correction of the error but it still does not work. I tried Microsoft fix it, he said he solved the problem, but then when I try to check the updates I get the same error again. My computer is slowing down because I can not update the system at all. It is said in my story I've ever done an update even if I tired many times. Please tell me what can I do to solve this problem, that I want to update my system to 8.1 but I can't because my system works any updates.

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/?linkid=9830262

  Please provide details of any problem it reports as not fixed.

• ODI 12 c Start Agent error ODI-1405

  Hi all.

  I'm running odi bash Linux agent and got the following error:

  2014-12-18 11:52:55.218 ERROR ODI - 1131 OracleDIAgent1 Agent encountered an error: ODI-1405: Agent OracleDIAgent1 start failure: the agent is not defined in the topology for master repository.

  2014-12-18 11:52:55.219 WARNING ODI-1405: Agent OracleDIAgent1 start failure: the agent is not defined in the topology for master repository.

  2014-12-18 11:52:55.224 unavailable WARNING

  2014-12-18 11:52:55.229 ODI-1443 ERROR error when starting agent: ODI-1405: Agent OracleDIAgent1 start failure: the agent is not defined in the topology for master repository.

  I created RCU, then the field, everything is ok.

  In the topology of the ODI - created agent of "OracleDIAgent1".

  And once again error)

  Where can I verify that this agent is in this topology?

  I have no idea how to solve this problem.

  Please help me.

  

  Thnx in advance.

  phanikanth

  Thanks for the return of coupling.

  In total, due to negligence.

  It was necessary to create the new connection simply.

  

  This option in case of which the agent has not been started is higher.

  

  In this option, the agent was launched and works perfectly.

  For those who will have to face a similar problem - look at a stage in the creation of a repository.

  Useful links on resources where this problem is more relevant detail are lower:

  http://gerardnico.com/wiki/dit/ODI/installation_12.1.2

  https://datagrraphy.WordPress.com/2013/11/02/ODI-12C-creating-a-collocated-agent/

  http://www.canburaktumer.com/blog/ODI-12C-setting-standalone-agent/

  http://Oracle-base.com/articles/12C/WebLogic-installation-on-Oracle-Linux-5-and-6-12cr3.php

  Good luck.

• Deployment Management Agent error

  
  Hi all

  I am agent deployment of management through the OEM console to the remote host.

  SGD is installed in the Linux machine while I'm deployment agent on UNIX machine. During this operation, I am getting error of authentication failure rather than give correct credentials (as below).

  "Make sure that the provided user name and password are correct. Make sure that the property that PasswordAuthentication is set to 'Yes' in the SSHD configuration file. »

  Could guide you please if there is another approach to deploy the Agent to management on the remote host?

  Thank you

  Dev
  

  -

  SSH user equivalence verification fails during the Installation of the Agent

  The most common reasons for verification of equivalence SSH user to fail are:

  • The server settings in /etc/sshd/sshd_config file do not allow ssh to user $USER .
  • The server may have disabled public key authentication.
  • The public key of the client on the server may be outdated.
  • You may not have spent the -shared option for shared remote users, or perhaps had this option for non-shared remote users.

  Check the setting of the server and re-run the script to set up the SSH user successfully equivalence.

  Alternatively, you can deploy the agent using the silent method. Please visit the doc Installation Oracle Management Agent in silent Mode

• Blocked Agent error OEM12c

  Hello world!

  I recently installed oracle database 11g and oem12c on a new server.  (both installed on the same server)  I know very little about oracle products, but I finally found it.  Now, I'm trying to get an agent deployed.  I understand now that there was already an agent installed to the db itself, but I didn't know that at the time, so I have deployed another which was probably a mistake.

  The original repertoire of the agent is always there as well as on the other that I deployed.   I'm ok with fixing any of these agents or wipe both outside and the deployment of a new.  What is the easiest thing to fix my errors?

  For the moment, I have the newer agents running.  It starts fine when I run "emctl start agent.  But OEM complains.  It is said:
  Agent is currently blocked. He will not be able to download alerts or metrics to the Service (OMS) management Oracle data until it is unblocked manually. Please ensure that all a bad Agent configuration issues have been resolved before the release of the Agent.

  I tried to click agent-> Resync I've seen suggested online.  It did not help.
  Here's what emctl status says:
  [oracle@oem101 bin] $. / emctl status agent
  Oracle Enterprise Manager Cloud control 12 c Release 3
  Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.
  ---------------------------------------------------------------
  Agent version: 12.1.0.3.0
  The WHO's version: (unknown)
  Protocol version: 12.1.0.1.0
  Home Agent: / u01/app/agentOEM12C/agent_inst
  File binary agent: /u01/app/agentOEM12C/core/12.1.0.3.0
  Agent process ID: 6873
  Parent process ID: 6806
  Agent URL: https://oem101.xxxxxxxxxx.com:3872/emd/hand /
  URL of repository: https://oem101.xxxxxxxxxx.com:4903/empbs/upload
  Starts at: 2014-04-22 14:02:24
  Started by user: oracle
  Last charging: (none)
  Last download successful: (none)
  Last attempt to download: (none)
  Total megabytes of XML files uploaded so far: 0
  Number of XML, files awaiting download: 106
  Size of the XML files in the upload wait (MB): 0.21
  Available disk space on the file upload system: 57.90%
  Collection status: activated Collections
  Pace heart status: Agent is blocked
  Blocked reason: mismatch between the agent and the repository Plugin. Please perform a resynchronization of the agent to unlock the agent. Not match plugins: [plugin is oracle.sysman.emas
  Last heartbeat to WHO attempt: 2014-04-22 16:02:31
  Last pulse successful who: (none)
  Then, at the request of the heart rate to WHO: 2014-04-22 16:05:31

  ---------------------------------------------------------------
  Agent is running and ready

  Clearly, he wants me to resync, but I did it from the user interface and the error has not changed.  Any ideas?  Again, I'm cool with the fixer or remove (don't know how to do it well) and the deployment of a new.

  Advice to help would be greatly appreciated.

  You can connect a SR with support so that they can help diagnose and solve this problem, or (as you do not mind) you can uninstall the 12.1.0.3 agent, remove its directories and redeploy the agent on the host computer.

  Related documents:

  Uninstalling Oracle Management Agents

  Installing Oracle Management Agents

  Kind regards

  -Loc

• POS for setup of SQL server agent error

  Dear community

  I try to install the WTP VMware for SQL Server agent, but the installation fails until he actually starts with the following error

  Microsoft.SqlServer.Smo.dll version does not match the installation of SQL Server most recent present on the system. Please update your DLL of SMO SQL before running this Setup again.

  Required version: 10.x.x.x

  The server has SQL Server Express 2008 R2 installed.

  I searched through the whole server and I found the following versions of this particular DLL

  C:\Program Files (x 86) \Microsoft SQL Server\110\SDK\Assemblies: v11.0.2100.60

  C:\Program Files\Microsoft SQL Server\110\SDK\Assemblies: v11.0.2100.60

  C:\Program Files\Microsoft SQL Server\100\SDK\Assemblies: v10.0.1600.22

  C:\Program Files (x 86) \Microsoft SQL Server\100\SDK\Assemblies: v1.050.2500.0

  As far as I know, only one version of SQL was installed and it came with my installation of Solarwinds Orion.

  Help is greatly appreciated.

  So I opened a case of pension on this issue.

  https://pubs.VMware.com/vSphere-60/topic/com.VMware.ICbase/PDF/VMware-data-protection-Administration-Guide-60.PDF

  Page 155, in the above document is on the backup and restore MS SQL Server using the SQL agent.

  There is a long list of supported SQL server versions, but guess what, SQL Express is not listed.

  Conclusion is therefore that only "full" MS SQL Servers are supported for backup. Guess I need to find another way to backup my SQL Express databases.

• The VRM Agent errors in vCAC 6.1 - cannot complete the connection due to an incorrect user name or password.

  Receive errors of VRM subject officer in vCAC 6.1 on a random/intermittent basis.

  I read the other posts documenting similar errors but in almost all of these positions, these errors arose following a request by commissioning has failed, a misconfigured in vCO vCenter Server Plugin interface or some other connection failure distinguishable. In my case, this condition is intermittent (at least it seems to be) and resolves in the end. I have no problem of supply of virtual machines on one of my endpoints configured in vCAC and, as far as I can tell, the network appears to be stable.

  At this stage since there seems to be no significant or negative impact for the health of the entire system, (for aesthetic reasons only), I usually end up the purge of these error messages in the SQL DB Table. I wonder if anyone else has this problem or clues as to what may be the cause of this?

  Here are some of the typical error log file.

  [05/06/2015 11:54:01] [Debug]: this exception has been taken:

  System.Web.Services.Protocols.SoapException: Unable to complete the connection due to an incorrect user name or password.

  at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse (SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)

  at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke (String methodName, Object [] parameters)

  at VMware.vSphere.VimService.Login (ManagedObjectReference, String userName, String password, String locale _C)

  at DynamicOps.Vrm.Agent.vSphere.VSphereSession.Connect (String username, String password)

  at DynamicOps.Vrm.Agent.vSphere.VSphereHypervisorServiceProvider.GetVcenterInstanceUuid (ManagementEndpoint managementEndpoint)

  at DynamicOps.Vrm.Agent.vSphere.VSphereAgentService.GetHypervisorData)

  at DynamicOps.Vrm.Agent.Core.VRMCoreAgent.SendPingReport)

  at DynamicOps.Vrm.Agent.Core.CoreAgentBase.SendPingReportLoop (Object sender, ElapsedEventArgs e)

  [05/06/2015 11:54:01] [Error]: <? XML version = "1.0" encoding = "utf-16"? >

  < Boolean > false < / Boolean >

  This exception has been taken:

  System.Web.Services.Protocols.SoapException: Unable to complete the connection due to an incorrect user name or password.

  at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse (SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)

  at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke (String methodName, Object [] parameters)

  at VMware.vSphere.VimService.Login (ManagedObjectReference, String userName, String password, String locale _C)

  at DynamicOps.Vrm.Agent.vSphere.VSphereSession.Connect (String username, String password)

  at DynamicOps.Vrm.Agent.vSphere.VSphereHypervisorServiceProvider.GetVcenterInstanceUuid (ManagementEndpoint managementEndpoint)

  at DynamicOps.Vrm.Agent.vSphere.VSphereAgentService.GetHypervisorData)

  at DynamicOps.Vrm.Agent.Core.VRMCoreAgent.SendPingReport)

  at DynamicOps.Vrm.Agent.Core.CoreAgentBase.SendPingReportLoop (Object sender, ElapsedEventArgs e)

  Ron thx.

  Indeed, it turns out that our network has been unstable with intermittent packet loss and the routing of the shortcomings... The main culprit seems to have been Channeling of Virtual Port (VPC) behaves poorly or badly configured on a physical switch uplink... VPC, in our case, was created to supplement our vSphere Teaming and failover policy settings.

• agent error

  Hello
  I try to start the agent independent odi. I followed the process according to the document. but it is in error as when connecting to the master repository, but I gave all the credentials correctly.i can able to create same user and pwd dataserver master rep. am I missed whatever it is anyone can solve this
  
  ERROR ODI - 1131 'nom_agent' Agent has encountered an error: ODI-1
  404: agent "nom_agent" start failure: an authentication error occurred during connect
  ING to the master repository.

  try to encode the supervisor password and put odiparams. see if that helps

• ODI Agent errors

  Hi all
  
  My ODI server is Linux. I have the weblogic and Manager has started, and then agent.sh began has had the following errors when starting agent.sh.
  
  ODI-1436 error recovery statistics ID for reference work WORKREP.
  Error occurred during computation of referential work schedules [WORKREP]. Error message: ODI-10150 - repository task ID1 is not related to the master.
  
  Please let me know what I should do to fix this problem.
  
  Thanks for your time and your help.

  for agent independent, even pointless to start weblogic (including the managed server) who hold a j2ee agent.
  before D'executer./agent.sh-name - PORT
  You must configure odiparams.sh, in addition to the information of the master repository, for example: ODI_MASTER_DRIVER.
  There is a
  ODI_SECU_WORK_REP = (if you please use studio to get working directory name)

• Creating agent error

  Hi guru,.
  
  This is my first post.
  
  I created Agent through topology, but when I'm testing it gives error like below,
  ODI-23006: Agent Test failed
  
  Detalis: oracle.odi.runtime.agent.invocation.InvocationException: ODI-1424: Agent Host or port can be reached using http://localhost:20910 / oraclediagent.
  
  Please can you help me on this.
  I installed ODI 11 G Desktop 64-bit windows 7 and to create the agent, I've not done something more excpet,.
  In topology > agent > LOCALHOST_20910 created.
  
  Is there something more need to configure.
  
  Thanks in advance,
  Srini

  Hi Srini,

  During the installation of the ODI on your machine had only chosen the type of Installation of the Developer? If Yes, then you won't find the folder for the agent. The ODI server is installed on another machine?

  Kind regards
  Sourav

• HA Agent errors

  I get errors in the HA agent on my ESX 3.5 cluster and each of my guests.  I can ping all hosts per server names.  I would try to disable HA on the cluster, and then turn it back on.  Can I do this transparently?  I can not also migrate virtual machines from one host to another because of the mistake of the HA.

  Thanks - Stephen

  You have all the same ESX build the levels of your cluster?  The reconfigure statement THAT HA is basically sets up the HA agent on the host.  Do you have DNS configured correctly?  All guests may mutually ping by FULL domain name?  The vCenter Server can do the same thing?