ODI 12 c Start Agent error ODI-1405
Hi all.
I'm running odi bash Linux agent and got the following error:
2014-12-18 11:52:55.218 ERROR ODI - 1131 OracleDIAgent1 Agent encountered an error: ODI-1405: Agent OracleDIAgent1 start failure: the agent is not defined in the topology for master repository.
2014-12-18 11:52:55.219 WARNING ODI-1405: Agent OracleDIAgent1 start failure: the agent is not defined in the topology for master repository.
2014-12-18 11:52:55.224 unavailable WARNING
2014-12-18 11:52:55.229 ODI-1443 ERROR error when starting agent: ODI-1405: Agent OracleDIAgent1 start failure: the agent is not defined in the topology for master repository.
I created RCU, then the field, everything is ok.
In the topology of the ODI - created agent of "OracleDIAgent1".
And once again error)
Where can I verify that this agent is in this topology?
I have no idea how to solve this problem.
Please help me.
Thnx in advance.
phanikanth
Thanks for the return of coupling.
In total, due to negligence.
It was necessary to create the new connection simply.
This option in case of which the agent has not been started is higher.
In this option, the agent was launched and works perfectly.
For those who will have to face a similar problem - look at a stage in the creation of a repository.
Useful links on resources where this problem is more relevant detail are lower:
http://gerardnico.com/wiki/dit/ODI/installation_12.1.2
https://datagrraphy.WordPress.com/2013/11/02/ODI-12C-creating-a-collocated-agent/
http://www.canburaktumer.com/blog/ODI-12C-setting-standalone-agent/
http://Oracle-base.com/articles/12C/WebLogic-installation-on-Oracle-Linux-5-and-6-12cr3.php
Good luck.
Tags: Business Intelligence
Similar Questions
-
Hi all
My ODI server is Linux. I have the weblogic and Manager has started, and then agent.sh began has had the following errors when starting agent.sh.
ODI-1436 error recovery statistics ID for reference work WORKREP.
Error occurred during computation of referential work schedules [WORKREP]. Error message: ODI-10150 - repository task ID1 is not related to the master.
Please let me know what I should do to fix this problem.
Thanks for your time and your help.for agent independent, even pointless to start weblogic (including the managed server) who hold a j2ee agent.
before D'executer./agent.sh-name - PORT
You must configure odiparams.sh, in addition to the information of the master repository, for example: ODI_MASTER_DRIVER.
There is a
ODI_SECU_WORK_REP = (if you please use studio to get working directory name) -
ODI 11 g Standalone Agent error
Hi all
ODI11g installed on a windows machine (have not installed the standalone agent). ODI directory is c:\ODI11ghome
Came later and create an autonomous agent TEST_AGENT (used different directory c:\odistandaloneagent).
I see the Agent in the physical and logical topology but impossible to start.
When I tried to start it by using the batch file agent_TEST_AGENT.bat under
c:\odistandaloneagent\oracledi\agent\bin
It returns the following error
OracleDI: Starting Agent...
Could not bind _logforceprintv
Osal.dll did not.
He osal.dll file is located under the c:\odistandaloneagent\jrockit-jdk1.6.0_17\jre\bin directory.
Is something wrong with odiparamas.bat file?
Jack.startscen.bat
[ ] [-AGENT_URL= ] ["-NAME= "] ["-SESSION_NAME= "] ["-KEYWORDS= "] [" = "] AGENT_URL is used to access the remote agent and so please use the correct url of the location of the agent
I think that this agent you are using is an agent of ODI server so it must be something like this
startscen.bat SALES 001 ODIDEV -NAME=DEV_AGENT
Also, make sure that you have the updated odiparams.bat file.
Are looking for in this link for more information http://download.oracle.com/docs/cd/E14571_01/integrate.1111/e12643/running_executions.htm#ODIDG620
-
Hello
I installed autonomous agent on the local computer and have trouble from it. Here are the details of the agent.
Name: stdalone
Port: 20910
When executing agent like this D:\Oracle\Middleware\Oracle_ODI_1\oracledi\agent\bin > agent.bat - NAME = stdalone-PORT = 20910, I get following error.
D:\Oracle\Middleware\Oracle_ODI_1\oracledi\agent\bin > agent.bat - NAME = stdalone-PORT = 20910
OracleDI: Starting Agent...
2014-06-30 09:51:07.187 WARNING agent.scheduler.pingAgent.failed
2014-06-30 09:51:07.192 warning Agent is not accessible. Go to try again after inteval: 30000
2014-06-30 09:51:38.200 WARNING agent.scheduler.pingAgent.failed
But it was working fine until last week.
Any idea how to make to know what is the problem with that?
The local machine has windows64 bits OS
Moreover, my ODI_JAVA_HOME in odiparams.bat is defined as ODI_JAVA_HOME = D:\Oracle\Middleware\jdk160_35
Thanks and greetings
Hello
Following steps hope this can help you
--> ODI-open Studio-> topology-> Agent
--> Change the name of the Agent to the IP host
--> Save changes
--> Cleanly shut down and restart the Agent.
Hope this can help you
Kind regards
Phanikanth
-
error when starting agent planner3.0 in connection server5.2 mode
I'm now deploy see 3.0 BOF Horizon view 5.2 planner, planner is downloaded from site(Viewplanner-3.0.0.0-1174010_OVF10.ova) web internal version, but will produce an error when start agent view server5.2 online scheduler,.
Traceback (most recent call last): File "c:\python26\lib\site-packages\win32\lib\win32serviceutil.py", line 806, in SvcRun self. SvcDoRun() file "d:\build\ob\bora-1174010\performance\viewplanner\ViewAgent\Package\C\serviceagent.py", line 73, SvcDoRun, file 'd:\build\ob\bora-1174010\performance\viewplanner\ViewAgent\Package\C\twisted_interface.py', line 39, in listening file "d:\build\ob\bora-1174010\performance\viewplanner\ViewAgent\Package\C\listener.py", line 36, in __init__ file 'd:\build\ob\bora-1174010\performance\viewplanner\ViewAgent\Package\C\listener.py', line 58, in readServerInfo IOError : (2, "No. such file or directory ', 'C:\\IP.txt')
I found there is no IP.txt file in C:\ and then manually create, add content:
HARNESSIP = 10.189.112.133
VIEWIP = 10.189.112.132
LOGIN = administrator
PASSWORD = ProArp13 #.
Domain = cqmccloud.com
but restart the agent service, remain of this error takes place, any help? Thank you!
PS: (2, ' No such file or directory ', 'C:\\IP.txt'), perhaps needs c:\IP.txt, not C:\\IP.txt.
Henry
This file is put in the package during the installation of the harness. If you skipped this step, it is likely that the IP.txt file was not in the packages of the agent.
-
Hello world!
I recently installed oracle database 11g and oem12c on a new server. (both installed on the same server) I know very little about oracle products, but I finally found it. Now, I'm trying to get an agent deployed. I understand now that there was already an agent installed to the db itself, but I didn't know that at the time, so I have deployed another which was probably a mistake.
The original repertoire of the agent is always there as well as on the other that I deployed. I'm ok with fixing any of these agents or wipe both outside and the deployment of a new. What is the easiest thing to fix my errors?
For the moment, I have the newer agents running. It starts fine when I run "emctl start agent. But OEM complains. It is said:
Agent is currently blocked. He will not be able to download alerts or metrics to the Service (OMS) management Oracle data until it is unblocked manually. Please ensure that all a bad Agent configuration issues have been resolved before the release of the Agent.I tried to click agent-> Resync I've seen suggested online. It did not help.
Here's what emctl status says:
[oracle@oem101 bin] $. / emctl status agent
Oracle Enterprise Manager Cloud control 12 c Release 3
Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
---------------------------------------------------------------
Agent version: 12.1.0.3.0
The WHO's version: (unknown)
Protocol version: 12.1.0.1.0
Home Agent: / u01/app/agentOEM12C/agent_inst
File binary agent: /u01/app/agentOEM12C/core/12.1.0.3.0
Agent process ID: 6873
Parent process ID: 6806
Agent URL: https://oem101.xxxxxxxxxx.com:3872/emd/hand /
URL of repository: https://oem101.xxxxxxxxxx.com:4903/empbs/upload
Starts at: 2014-04-22 14:02:24
Started by user: oracle
Last charging: (none)
Last download successful: (none)
Last attempt to download: (none)
Total megabytes of XML files uploaded so far: 0
Number of XML, files awaiting download: 106
Size of the XML files in the upload wait (MB): 0.21
Available disk space on the file upload system: 57.90%
Collection status: activated Collections
Pace heart status: Agent is blocked
Blocked reason: mismatch between the agent and the repository Plugin. Please perform a resynchronization of the agent to unlock the agent. Not match plugins: [plugin is oracle.sysman.emas
Last heartbeat to WHO attempt: 2014-04-22 16:02:31
Last pulse successful who: (none)
Then, at the request of the heart rate to WHO: 2014-04-22 16:05:31---------------------------------------------------------------
Agent is running and readyClearly, he wants me to resync, but I did it from the user interface and the error has not changed. Any ideas? Again, I'm cool with the fixer or remove (don't know how to do it well) and the deployment of a new.
Advice to help would be greatly appreciated.
You can connect a SR with support so that they can help diagnose and solve this problem, or (as you do not mind) you can uninstall the 12.1.0.3 agent, remove its directories and redeploy the agent on the host computer.
Related documents:
Uninstalling Oracle Management Agents
Installing Oracle Management Agents
Kind regards
-Loc
-
Firefox does not start, no error message, only works in the background
I click on Firefox it does not start
no error message it does not start
It works in the background in 32-bit
I have re installed it but nothing changesIt is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.
Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.
See:
-
Windows Live Photo Gallery does not load. Receive the message "WLXPhotoLibraryMain.dll cannot start. "Error code: 0x800736b1" what should I do?
Hello
Fix Windows Live photos from Add/Remove programs or programs and features. If this does not work, please proceed to uninstalling the app. It was formerly no Ospreys wing, please proceed with the download and reinstall the application. I hope that this information is beneficial.
Thank you
Aaron
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
I've updated from vista to the most recent update.
I have windows vista Home premium 32-bit.I want to get this matter resolved without having to reinstall as I have a few games installed it on this system.The modem is not the issue as other computers connect very well.Thanks for the help from Microsoft.Recently, I tried to connect to the internet but that was not possible, because no connection could be established. The remote access connection manager does not start 2 error: could not find the specified domain. the RasMan-dependent services are started, but Manager logins remote does not start.Hi Mundilfar,
You can try the folliwng steps and see if it helps.
Step 1:
You can try to scan the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.
For more information, you can consult the following link.
Step 2:
If you are always faced with the question, then you can try to give permission for the Rasman registry key and see if it helps.
Important: The following steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
For more information about how to back up and restore the registry, follow the steps from the link below:
a. Click Start, type regedit in the search box and press ENTER.
b. Locate the following subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RasMan
c. right click on the key and click Permissions.
d. Select Advanced, click on owner tab, click your user name, and check the 'Replace owner of subcontainers and objects', click Apply - click OK.
e. click the user or group name that you want to work with.
f. check allow total control. Click apply and then click OK.
g. restart the computer and check.
Hope this information is useful.
-
Toshiba laptop start registry error after manual stop
original title: Toshiba laptop start registry error after manual stop - HELP!
Hello, I have a Toshiba laptop with Windows Vista. Yesterday it froze completely upward and I had to manually close (hold the power button until stop you him) twice. The second time when I tried to restart the came Toshiba screen, then the screen with the little scroll down bar, and then it went black, waited for a while, then flashes a bluescreen with a written up VERY quickly and cycles back to the Toshiba screen. This time after the scroll bar it gives me white saying the writing system could not restart, and I want to start normally or startup repair. If I restart it through loading files, trying to fix it and said then he wasn't able to fix it and when I look at the details there something on a registry error.
I really need to solve this problem quickly and desperately want to save all my files if possible because it's our main Mobile family that has all our digital photos on it and they are not saved. (I know, terrible of us). Can someone help me?
Thank you
Charity
Follow these steps to try to solve your problems of boot.
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner:http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Data recovery:
1. slave of your hard drive in another computer and read/save your data out there.
2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.
3 Alternatively, use Knoppix Live CD to recover data:
http://www.Knopper.NET/Knoppix/index-en.html
Download/save the file Knoppix Live CD ISO above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://isorecorder.alexfeinman.com/isorecorder.htm
Download the Vista software from the link above.
After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.
Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.
Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.
Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.
When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.
Click on the icons of hard drive to open and to understand which drive is which.
Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).
Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.
See you soon.
Mick Murphy - Microsoft partner
-
I bought a latitude d530 use. It came with Windows 7. Site Web of Dell initially said vista wit came. It is no longer start. Error says check the data cable. Sometimes, reinstall drive. I do not have the windows CD. Can I download the original Windows on android phone and the transfer
You can download and create a bootable copy:
then
-
original title: error code 0 x 80070015
I have recently installed Windows Live Essentials 2011, and since then, I have been unable to open the .jpg files in Windows Live Photo Gallery.
I get the following message:
Windows Live Photo Gallery encountered an error loading WLXPhotoviewer.dll and cannot start. Error code 0 x 80070015.
Any help would be appreciated.
see you soon
Dan
Download and install this
http://explore.live.com/Windows-Live-Photo-Gallery?OS=other
If this post answers your question, click mark as answer .
-
Start testapp error "Module: TestApp-1" must be signed with the Runtime RIM signing key code
Hi all
Help me please
I signed my code files with the signign provided blackberry (RRT, CPR, RBB) keys. When I download my application via OTA in my camera, and when I run my application it shows an error like "start Testapp error: ' Module: TestApp-1" must be signed with the Runtime RIM signing key code ".so I signed my application code files, when I opened TestApp-1 to sign it indicates"no signature required"."
Please anyone suggest me.
Thank you
Ashutosh
I think that JDE currupted. When I compile it with different JDE, he executed well.
Thank you all to share your experiencewith me.
-
Computer Dell laptop, OS preinstalled Windows 7 does not start. Error: PXE - E61
Original title: Failure to Boot to
Computer laptop Dell, OS of Windows 7 pre-installed. No disc restoration/reformat/install for 7. (This is bullcrap if you ask me). Does not start. Error: PXE - E61: Media test failure, check cable PXE - M0F: out Broadcom PXE - ROM
What should I do here?
See if there is a solution here: http://hubpages.com/hub/How-to-Solve-PXE-E61-Media-test-failure-Check-cable-Error
J W Stuart: http://www.pagestart.com
-
I conducted an audit of file, the disk check, you click on uninstall the driver in Device Manager and went as far as reinstalling Windows (I sell the laptop) and still have the error! Someone help me please correct.
It was working fine before, then update iOS to 6 came out, and when I plugged it in iPad after update, started having error shortly after. I tried to install and unistaling software from apple, and as I said, I even reinstalled windows. always error.Hello
Method 1:
I suggest you to run the fixit from the link.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems
Method 2:
Step 1:
In Device Manager, check whether the USB controller appears as working properly or have a yellow on her exclamation when the device is connected. Look for error codes as well.
http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager
Step 2:
Check if the device is recognized on another computer.
Hope this information is useful.
Maybe you are looking for
-
Using Windows Vista.When you move the pointer over known link, pointer does not change or indicate a viable relationship.No destination link in the bottom left of my screen looks like either java script instead of an Internet link.I find this problem
-
Hi, I bought a LED TV 46TL938 this month and I am having trouble with the character encoding of the subtitles...Characters such as 'c' a a a to are replaced by one? 'square '.Someone has the same problem and knows how to solve this problem?Any specif
-
What impression it by default in "file .xps instead of print
When I try to print by default to a page of microsoft with a file "xps. It does allow me to print.
-
This date has not to install 6 times already and don't stop telling me to install. What should I do if he will not be installed?
-
Copyright / reserved / brands of unicode characters
Hello I am trying to find out the escape sequences unicode for the reserved [circle with R inside] symbol and the symbol of the brand [TM]. I know there is one for «\u00a9» copyright If someone can point me in the right direction on how I can get the