Aggiornare da VMWARE FUSION 5 has 7

Similar Questions

• What happened to the 'light' of VMware Fusion 7 has been released since version?

  Earlier versions of VMware Fusion has always had a 'light' version, which did not include the McAfee or the VMware tools.

  For some reason any now with version 7, this option seems to be gone. Any idea when / if a lighter version finally released?

  Example: VMware-Fusion - 6.0.2 - 1398658-fire.dmg

  -----

  Note: there are two different versions of merge available for download: a version is complete is a larger file to download; the other version is marked 'light' and is a smaller download, but includes no VMware Tools .iso files for Linux or the McAfee AntiVirus Plus software.

  Article is not entirely accurate and I suspect that when "VMware Fusion 7.x" was added to "product version (s):" and other sections on the page it was the left hand not knowing what the right hand is doing.  It is my understanding that starting with VMware Fusion 7 it will be only the image of an installer, without the image of com.vmware.fusion.zip.tar update Fusion.app from VMware downloads, "VMware Fusion 7 with VMware Tools for all operating systems (full Installation)" for example "VMware-Fusion - 7.0.1 - 2235595.dmg".  The AntiVirus is downloaded when clicking on ' Install McAfee AntiVirus Plus in the menu 'Virtual Machine', if desired. "

• PB license vmware fusion after reinstalling mac os x leopard

  Hi all

  I'm french so excuse me if my English is bad.

  My problem:

  I buy vmware fusion, it works but, after that, I reinstalled mac os x, and when I started vmware I got the error message:

  This copy of vmware fusion which has not yet been approved.

  and when I enter my serial number and my password I still have the error message

  I hope there is a solution because I have to buy...

  Thank you very much

  Post edited by: lishenron

  This will not delete your virtual machines.

• 10 Easy Install Windows crashes with "VMware Fusion has encountered an error."

  When I tried to install Windows 10 Pro on VMware Fusion 8, easy installation process works normally for awhile then crashes with "VMware Fusion has encountered an error."

  I submitted a request for assistance, but other users have it met with the easy installation process?

  (Support information are attached.)

  -Douglas

  Hi Douglas,.

  It looks like a problem with your graphics driver or the graphics card:

  VMware.log said it was the SVGA thread that crashed:

  2015-09 - T 02, 07: 16:47 - 06:00 [+ 10.606] | SVGA | W115: Caught Signal 6 - tid 38927 (addr 7FFF914E9286)

  /var/log/system.log reveals that the pilot needed to restart the GPU seconds more host later:

  2 sep 07:16:56 Douglass-Mac-Pro kernel [0]: NVDA: GPU error detected!

  2 sep 07:16:56 Douglass-Mac-Pro kernel [0]: NVDA: call gpusKillClient for task 0xffffff80727586d0

  2 sep 07:16:56 Douglass-Mac-Pro kernel [0]: NVDA (OpenGL): channel timeout!

  2 sep 07:16:56 Douglass-Mac-Pro kernel [0]: NVDA: Info channel: [0, 47 x 31, 0 x 14, 0x1ca5ef]

  2 sep 07:16:56 Douglass-Mac-Pro kernel [0]: NVDA: Version Info: [com.nvidia.web.GeForceWeb, v10.0.5 0x5e5f4c655b, 19862786, 346.02.03f01, 1]

  Many other people are also experiencing problems with Fusion 8 graphics cards and spare parts and/or the driver Nvidia on the web here: conflicts of Fusion 8.0 with Nvidia driver of web for Mac

  Workarounds for this thread: try disabling acceleration 3D for the virtual machine.  Try to uninstall the driver Nvidia of the web and win back the builtin driver OS X.  If you use a spare graphics card, try reinstalling the original.

  See you soon,.

  --

  Darius

• VMware Fusion has encountered an error and has stopped Windows.

  Summary:

  I started experiencing this problem in November and was beaten on that since including using the VMware support and Apple support.

  Full of the message in the virtual machine window:

  = VMware Fusion has encountered an error and has stopped

  = bottom of Windows.

  ====

  = Click on restart Windows to start Windows again.  Click report for

  = collect and request the support of VMware.

  ====

  = < ignore > < report... > < Windows restart >

  By clicking < report... > generates the report

  Clicking on < reboot Windows > hangs the system.

  Various VMware Fusion, Virtual Machine commands do nothing.

  Again, only way I found to get there is to Apple, Force Quit of VMware Fusion.

  Two systems in question, iMac and MacBook.

  Familiar to anyone else?

  Details: =.

  The two systems were very well work well on several years.

  Status of starting point was.

  -iMac and MacBook running VMware without any problems for several years.

  -This includes several updates to Mac OS and VMware Fusion.

  -OS X 10.9.5 on both systems with the latest upgrades.

  -VMware Fusion 6 on all systems with the latest upgrades.

  -Virtual Machines on two almost identical systems - Windows 7, all derivatives of a VM database.

  
  

  Problem started only on iMac.

  
  

  In weeks, with the encouragement of support VMware and Apple have updated to Yosemite, installed VMware Fusion 7 and built Windows 8.1 scratch machines.

  
  

  Problem now happening on both systems with MacBook, stay alive for about 15 minutes and iMac may be several hours.

  Any ideas appreciated.

  Thank you.

  Paul

  In summary...

  This problem was initially detected on iMac and MacBook:

  Mavericks

  Fusion 6.x

  Windows 7

  The ultimate resolution iMac and MacBook:

  Yosemite

  Fusion 7.1.1

  Windows 8.1

  Details of the way pick up what 7.1.0 merger was in place for the ultimate resolution in the chat messages.

• VMWare Fusion has a memory leak

  I believe that VMWare Fusion has a memory leak. Version 4 has done, makes version 5 and version 6 only. I think I narrowed down it to VMWare Fusion. When I Google the topic, I find little information about it, which confuses me, as I assume that others must have this problem. I talked to the support, I did some research and I've not found anything useful. If you have had this problem, or have figured out how to fix, please let me know.

  Hi Tedmichon,

  I believe that you never mentioned your guest OS?

  If you the disks are aligned then disable hard disk buffering might help reduce the memory idle problem you have.

  If your disks are aligned not - as the default with comments older operating systems such as Windows XP - disable and then hard disk buffering probably will diminish your experience of the guest OS. Windows Vista and later have their default aligned drives and I think that the hard disk buffering is less a problem.

  To change preference may affect you negatively in other words, it was not clarified yet, but you can turn off hard disk buffering. (Don't forget the current setting)

  With your VM close, go to settings-> Advanced-> disk buffering, change to disabled.

  FWIW a long time ago, I aligned the disks on my main Windows XP and turn off buffering of hard drive.

  hope this helps,

  --

  Wil

• VMware Fusion 3.0.1 update error (the connection to the update server has been lost)

  Hello

  I tried to update my vmware fusion many times, but I get this error message. I'm sure that is not because of my connection because I was running OSX update at the same time and I was able to update my OS x without any problems. VMware actually stopped the 3.0.1 update because they are a lot of bugs or there is something else, what happens to me laptop. BTW, I use a 2.8 Ghz MBP.

  See you soon

  Instead of updating through the Fusion program, try to download the package install .dmg and upgrading in this way.  Go to http://www.vmware.com/download/fusion , scroll down and get information, then download the full version (415 MB) or the Light version (170 MB, less AV and some tools).   The light version can download additional items later if necessary (I hope).

• VMware Fusion has a break?

  I like VMware Fusion!   Thank you so much to the developers and managers of product for a product really excellent!

  We have four developers PHP using Fusion to test browsers (IE6, 7 & 8 / Firefox / Safari on Windows XP & Vista).

  We also have a production-server VM Linux development.

  The production Linux VM type consumes almost no resources and runs like a dream.

  XP VM is heavier on resources.

  But when I run a virtual Vista machine - whoa - pain, pain, pain.

  My beautiful Mac reactive (MBP 15 "2.4 GHz 4 GB RAM), recently all of a sudden all these additional delays as bloat-ware Vista eats CPU and talks to the memory.

  I bought a Mac to get away from that.

  I can suspend the VM in Vista when no browser test, so Vista continues to slow down my Mac, but...

  Suspend the Vista virtual machine makes quick have we-broken - browser Internet Explorer verifies untenable.

  Resume the VM (oh my poor Mac)-check the page - replace VM - takes too long.

  I hear that other VM for Mac products can have a "Pause" feature

  The virtual machine remains in memory.

  Restart the virtual machine, do something fast (like a browser test), then he stopping once again is very fast.

  VMware Fusion does a pause feature?

  If this is not the case, if this feature is planned?

  Thank you!

  But when I run a virtual Vista machine - whoa - pain, pain, pain.

  My beautiful Mac reactive (MBP 15 "2.4 GHz 4 GB RAM), recently all of a sudden all these additional delays as bloat-ware Vista eats CPU and talks to the memory.

  How much RAM do you have given to Vista virtual machine, and what kind of programs are you running in the host and the guest? Merger is set to be optimized for OS X applications or virtual disk performance? A 4 GB Mac should be able to run Vista without problems.

  VMware Fusion does a pause feature?

  Yes, even if it is not exposed in the user interface. You can get home with vmrun, a command line utility that comes with the merger. If you don't like the (entirely understandable) command line, I wrote some wrappers to automate for vmrun.

  If this is not the case, if this feature is planned?

  VMware policy is not to comment on unannounced features/products/time/etc., so that we cannot say.

• Bootcamp Windows 7 cannot run by VMWare Fusion 8.1.0

  I use MBP (13 "mid-2010) 2.4 GHz Intel Core 2 Duo 8 GB 1067 MHz DDR3 Nvidia 320 M 256 MB

  That's what I did in chronological order

  (1) improved my MBP to El Capitan 10.11.1

  (2) my VMWare Fusion Pro 7 did not work - asked me to upgrade to version 8 to access my Windows 7 Boot Camp

  (3) no choice... I had to upgrade to VMWare Fusion... fact to 8.0.0... my Boot Camp Windows could not always run... .deleted previous Virtual Machine... again added to select Windows in boot camp...

  (4) does not work either... just got a free upgrade to VMWare Fusion 8.1.0... now the question is much worse... when I try to add my windows Boot Camp... That said:

  " Volume the Boot Camp is not prepared to stand as a virtual machine. It seems that Windows don't is is not properly stopped the last time it was used.

  "To shut down Windows properly, go to System Preferences > startup disk and set Windows as the start-up operation.

  (5) tried to run windows to startup as suggested... says NO OPERATING SYSTEM FOUND... it seems that my windows boot file is missing?

  Wait a second... (I don't know why I did... but I 'played' with the utility drive Partition and tried to expand my (not accessible) windows... between step 2) and 3) above

  Ideas to solve my problem...

  Appreciated. Thank you.

  Step 1 has caused the problem. It may be easily fixable. Can you post the output of the following Terminal commands?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• GPIB-usb-hs on vmware fusion

  I am running Windows 7 64-bit on an iMac with OS X 10.6.5 via VMWare Fusion. I installed the driver NOR-488. 2, but can not see my GPIB-USB-HS device. This post: http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/NI-488-2-does-work-on-Windows-XP-Mode-within-... seems to indicate that someone else has had success; his problem was using XP Mode.

  Anyone can shed some light on this? Can I expect the combination of the GPIB-USB-HS with Windows 7-64 on VMWare Fusion on an iMac to work?

  I also have a USB-6215 is working well.

  Thank you!

  John-

  I moved my virtual machine to an OS X 10.6.6 system and things did not work immediately. The GPIB-USB-HS was not visible to the MAX and in Device Manager it looks good, when when I open the property page, he says that there is no driver loaded.

  I was able to get the GPIB-USB-HS working by choosing to update the driver through the Device Manager. The steps to do this are:

  1. right click on the GPIB-USB-HS in Device Manager and select "update driver software...". »

  2. Select "Browse my computer for driver software" and then "Let me pick from a list of drivers for devices on my computer.

  3. you must be exactly a GPIB-USB-HS driver to choose. Select it and click Next.

  4. once it finished, view the properties of the device and make you it is said "this device is working properly."

  I did the same test for validating a single request with the device, but it seems to work.

  Let us know if this helps,

  Jason S.

• VMware Fusion 5 and Yosemite

  Hello

  Does VMware Fusion 5 support Yosemite Mac OS X 10.10.4?

  I just upgraded from Mountain Lion, but when I tried to run a virtual machine that was working on the Mountain Lion, I get "could not open/dev/vmmon: no such file or directory."

  Thank you.

  Hello Yu Chun-Pong,

  The answer is 'No', and follows the answer a little longer...

  I'm sorry to inform you that Fusion 5.x does not work under OS X Yosemite.

  5.x end merger of general support was on 23/08/2014, before the release of Yosemite.

  You can watch the Matrix of Life Cycle of the products for the exact dates.

  It is highly unlikely that VMware publishes an update to a product that has been withdrawn.

  You can roll back to Yosemite to the Mavericks if you wish to continue using the Fusion 5.x or upgrade to a newer version supported.

  If you want to test the latest version to see if it is worth your expenses, you can install and run a fully functional version of 30 days before actually committing to spending anything.

  After 30 days, you purchase a license to modify the merger installed in an unlimited version.

  For the assessment of the merger's direct download link

  In addition, you can also choose to run the Tech Preview, but don't realize that--although normally very stable – there is no guarantees with preview/test software.

  The Tech Preview is here: VMware Fusion Technology Preview 2015 [ARCHIVE]

  --

  Wil

• VMWare Fusion pro 7.1.1 - blocking running yosemite as a guest problem

  Hi all

  I have a Yosemite pro running (mid-2014, 16 GB of ram video card w / discrete) MacBook. When I run a guest of yosemite, the video is very lag, and the virtual machine is generally not very handy.

  The guest has 4 cores, 4 GB ram, 256 MB of video memory (using the discrete card for 3D applications only) and implements the latest vmware tools 'material' and vmware. I disabled the sound and bluetooth.

  Is that what I can do to improve performance?

  Thank you!

  Yes.  Please check this blog for the manual workaround and a program called "BeamOff" that will provide relief without manual effort.  https://derflounder.WordPress.com/2014/12/13/improving-Yosemite-VM-performance-in-VMware-Fusion/

  I am not the author, and cannot vouch for the port version, however.  I downloaded the source, reviewed and updated on mine, just to be sure.  But it will fix the problem that you are experiencing.  (You need to run the application in the prompt, if it isn't obvious!)

  -Joe

• Selection of the method of Installation of VMWare Fusion 7

  So I take an edx online course: Introduction to computer CS50x. I am following the installation of VMware Fusion instructions found at the following link: https://manual.cs50.net/appliance/2014/fusion/

  I followed the instructions in step #4: I double click the icon of VMware Fusion. I clicked on 'Open' when prompted. I typed my administrative password. I accepted the license agreement. I inserted the license key. I am now in the window "select the installation method. But herein is the problem. I do not know what installation method to choose, and there are no instructions on it. My options are: (1) import of disk or image; (2) import existing PC; (3) install OS X from the recovery partition; (4) import a virtual machine existing; (5) installation of Boot Camp. and (6) create a custom virtual machine.  There are no instructions or advice to navigate through these options.

  Assistance would be greatly appreciated.

  From what you have posted, it seems to me that the merger has been successfully installed. The dialog box "Select installation method" you see is Fusion trying to be helpful and you guide in the creation of your first virtual machine.

  At this stage of VMware Fusion and eject the mounted disk installation image (so that you do not open the installation program when you must open the copy installed on your disk). Continue to step 5 to download your virtual appliance of the format .ova.

• How does VMWare Fusion 7?

  I'm close to be computer illiterate, I'm sorry. I need to run a Windows program on my Mac. It's called Cobra show creator, cobrafiringsystems.com, and it is used for the fireworks of script and poster design. I installed VMWare Fusion 7, then Windows 7 Pro. In Safari, I downloaded the application Cobra show creator. I don't know how to get Windows so I can run. Of course, I don't know what I'm doing and the need for a resource really basic beginners to help me understand how to perform this task in a single. Run the Cobra Show creator. When I open VMWare Fusion, a black and gray appears with a white arrow, I click on the arrow, a progress bars runs for a while and then I get a black screen. At the top of the screen, there is a toolbar and a small vmware with 'Windows 7 x 64' icon next to it. If I do start with "How a computer works for Dummies" and progress through a course of self-study set to arrive at a moment where I understand it, it's fine. If someone will put me in the first step to be able to run this program on my Mac, I will appreciate it.

  Michael Guerra, M.D.

  Kerrville, Texas

  I'll bite. Here are the steps you need to take. Keep in mind that it's my best guess - I have never installed or used Cobra show creator, so I don't know exactly how it is supposed to work:

  TO START:

  1. Launch VMware Fusion. I guess that you have done with this.

  2. install Windows 7. I guess that you have done with this.

  3. start Windows 7 in VMware Fusion. Looks like you do this step correctly, and appeared a window Windows 7 (with the toolbar, etc.). What I don't understand is why the window is black. My Windows 7 window is black as long as Windows 7 is starting, but I see a normal Windows 7 window, once it's over.

  FIX: In the menu bar Mac, VMware Fusion, select the Virtual Machine-> Reboot and tell us what is happening. We will need more information to help you solve this problem.

  Next steps:

  WINDOWS IS GO:

  4. Once Windows 7 is to the top, you should see a normal screen of Windows 7 with the Windows flag 'Start' button in the lower left corner. If this is not the case, connect to Windows 7 with the account and the password that you created during the installation. Now you should see the Windows flag 'start '.

  5. in the Mac, VMware Fusion menu bar, read the Virtual Machine menu.

  Does include "Install VMware Tools"? If so, select and install VMware Tools from within the window of Windows 7. Choose all the default values.

  If it says "Update VMware Tools", skip it and proceed to the next step (step 6).

  SET UP A SHARED FOLDER:

  6. in the VMware Fusion menu bar, select the Virtual Machine-> settings (or press command-E)

  7. in the settings window, click "sharing".

  8. click on (check mark) "enable sharing".

  9. click on the sign more, then navigate to the Mac folder that has the installer of Cobra show creator.

  10. the folder should appear in the list, and "on" must be checked.

  11. close the Setup window and return to the screen of your Windows 7.

  INSTALL COBRA SHOW CREATOR:

  12. click on the button "Start" Windows flag in the bottom left corner and select "Computer" on the right side of the menu.

  13. subject to the network location, double-click shared folders to open, and then double-click your shared folder to open it.

  14. double-click on setup of Cobra show creator.

  15. follow the prompts to install Cobra show creator. I hope it's intuitive. If in doubt, accept the default value.

  16. after the installation, you can double-click a desktop icon Cobra show creator. If there is no icon on the desktop, then click the Windows flag 'Start' menu and then click on Cobra show creator.

  Warnings and additional remarks:

  * I assumed you use settings by default when you installed Windows 7 virtual machine in VMware.

  * I guess these default settings are sufficient for Cobra show creator.

  * I take you to the word you go only to run Cobra show creator. If you do a lot of other things in Windows, including connection to the Internet, then you should proactively make sure it is safe by installing software anti-malware, keeping Windows updated with patches updates, monthly Microsoft etc..

  Good luck! Happy Easter! Let us know what's going to happen.

• VMWare Fusion 6.0.5: Could not open/dev/vmmon: no such file or directory.

  I've been running VMWare Fusion 6 on my MacBook Pro with the Mavericks for quite awhile.  I just got a Mac Mini with Yosemite and I want to copy one of my virtual machines of the MBP to the Mini.

  I tried to just copy the vmware.vm of the MBP to the Mini but when I open it and try to start it I get the following errors:

  • Unable to open/dev/vmmon: no such file or directory.

  Please ensure that the "vmmon" kernel module is loaded.

  • Could not initialize the surveillance apparatus.
  • Internal error

  I also tried to import the vmware.wm file, but it is always grayed out.

  How can I copy a virtual machine from one Mac to another?

  Hi atj777,

  Are you absolutely certain that this is Fusion 6.0.5, you're there?  Fusion 6.0.4 and earlier would fail on Yosemite the way you describe.  There are many other possible causes of the same error message, but it would be the first thing I would check a second time.  (My apologies if you have already verified!)

  What version of Yosemite are you running?  10.10.2?

  It can also be useful to restart your Mac to see if that helps... sometimes he does.

  To answer your question directly: simply copy the ".vmwarevm" package on the whole should be enough.  The message you see is a generic merge error and has nothing to do with the copy process.

  See you soon,.

  --

  Darius