AIR - SAP vs AIR - CAP

Similar Questions

• Can I configure Cisco (AIR-CAP1602I-T-K9) 1602i offline?

  Hi everyone, please, I need help here.

  I bought 3 Cisco (AIR-CAP1602I-T-K9) 1602i but I did not buy a controller. How can I configure then offline?

  I saw in other forums, I need to change the IOS software to a stand-alone software. They suggested the ap1g2-k9w7 - tar.152 - 4.JA1.tar. I would like to know if this is the right software and if there is no problem with the license if I download and use it.

  Explanation of the differences between AIR-CAP-1602i-x-K9 e AIR-SAP-1602i-x-K9

  http://community.Spiceworks.com/topic/448208-Cisco-Aironet-1602i-questions-issues

  How to convert standalone IOS

  http://www.experts-exchange.com/Networking/Wireless/Q_28245190.html

  Download IOS:

  http://software.Cisco.com/download/release.html?mdfid=284366503&softwareid=280775090&release=15.2.4-JA1&flowid=37523

  Thank you.

  Wesley

  Hello

  Yes, you must pass in stand-alone mode. Yes, this is the right software and you will not face any problem regarding the license.

  But to download the standalone AP image of cisco, you need a CCO (Cisco connection) and the valid service contract.

  Here is the final image: can download here

  http://software.Cisco.com/download/release.html?mdfid=284366503&flowid=3...

  How to covert to lAP for standalone:

  http://www.YouTube.com/watch?v=QQ_NuxdRhQ4

  http://rscciew.WordPress.com/2014/05/07/access-point-conversion-lap-to-a...

  Concerning

  Remember messages useful rates

• Air-sap2602i-n-k9 <>= air-cap2602i-n-k9

  I wish to order two autonomous.

  What is the difference between "air-sap2602i-n-k9" and "air-cap2602i-n-k9"?

  SAP means autonomous.

  Medium CAP controller.

  But it does not matter if you have ordered an evil because it is very easy to convert the SAP AP in Cape TOWN and vice versa.

• Construction (error internal.llb) .exe error

  Hi all

  I have built many exe, but for some reason, this one is hard!  I get an error that says:

  Error 1003 has occurred at \\Rochester\mtp\Test Rigs\NC4\NC4 Air Cap\Code Development\Air CAP v2.0\exe\internal.llb\Air v2.1.vi Rig inspection Cap

  I spent reviewing the many forum posts that suggest that one of sub vi is not executable.  The main and all vi the subvi will be running in the labview environment.  I tried a forced compilation and even a massive compilation.  All to nothing does not.  This problem occurs on two different PC and build other similar thin vi, so I guess it isn't a problem with the manufacturer.

  I'm using LabVIEW 7.1, 8.0 Vision and IMAQ 3.5.1: see attached report for good measure.

  Can you help me?

  If you need to sub that VI let me know.

  Dan

  See the solution here: http://forums.ni.com/ni/board/message?board.id=170&message.id=360001#M360001

• Build exe error involvving internal.llb

  Hi all I have built many exe, but for some reason, this one is hard!  I get an error that says: Error 1003 has occurred at \\Rochester\mtp\Test Rigs\NC4\NC4 Air Cap\Code Development\Air CAP v2.0\exe\internal.llb\Air v2.1.vi Rig inspection Cap I spent reviewing the many forum posts that suggest that one of sub vi is not executable.  The main and all vi the subvi will be running in the labview environment.  I tried a forced compilation and even a massive compilation.  All to nothing does not.  This problem occurs on two different PC and build other similar thin vi, so I guess it isn't a problem with the manufacturer. I'm using LabVIEW 7.1, 8.0 Vision and IMAQ 3.5.1: see attached report for good measure. Can you help me? If you need to sub that VI let me know. Dan

  Hi Jordan,.

  I couldn't see anything wrong with the individual sub - vi and I tried your suggestions.  Turns out in the end a problem with the opening of the workbook with a password.  There is no security on the daughter to excel, but the vi has been programmed to use a.  If I removed the password of the vi it does not open so I added a password for the excel file and - hey presto! -everything works and relies on an exe file!

  I have not tried on the machine yet, but I am optimisic that it will work.

  I think it's for lack of microsofts!

  Thanks for your suggestions; you reduced to the excel link.

  See you soon,.

  Dan

• access the webcam android device via adobe flash

  Hi all
  
  I'm trying to access the webcam from a flash on my 2.3.3 android app but I can't do, it seems like the flash player has access to the hardware device.
  If I try to a few websites that provides a simple demonstration for the detection of faces, I get the error that the webcam is not found...
  
  any idea?
  
  Thank you

  I have to have my AIR cap on last night when I answered.  As I understand it, camera support is not provided through mobile web browsers at the moment.  However, it is available through the AIR based applications.  The feeling must be supported.

  Thank you

  Chris

• Hello. I buy the Macbook Air Mid 2015... After the upgrade to El Cap internet speed slowed painfully. What should do? Help, please

  Hello. I buy the Macbook Air Mid 2015... After the upgrade to El Cap internet speed slowed painfully. What should do? Help, please

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Conversion light wireless AIR SAP 1602

  Hi, we have many points of access AIR-SAP1602I-E-K9 who are currently working in stand-alone mode, we have now a 2504 Wireless LAN controller so is possible to convert the AIR-SAP1602I-E-K9 in light mode?

  Yes you can. Make sure you have at least 7.4.100.0 version on WLC in support of the AP of 1602.

  1. for the conversion of LWAP, use the recovery image. First download the rcvk9w8 software from this link.

  2. then, you copy the IOS to your TFTP server to your access point.

  3. the order, must be registered to the AP, is: archive download-sw/over tftp: / / /.

  Check these procedure:

  http://www.Cisco.com/c/en/us/TD/docs/wireless/controller/7-4/configurati...

  http://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/

  https://www.YouTube.com/watch?v=Fiv76UpStKI

  Concerning

  Remember messages useful rates

• SHIFT key does not work on the bluetooth keyboard connected to the Air ipad on ios 10

  the ipad reboots when we use the uppercase key on the air of the iPad. And in some cases, it shows the changing language selection when the SHIFT key is pressed. The keyboard is perfectly fine and works with ipads o

  I also have the same problem.

  I use 2 keyboards, Bluetooth,

  A wireless Apple keyboard - I mean Magic Keyboard

  The other is universal foldable keyboard from Microsoft

  After updating iOS 10.0.1, Caps Lock does not work, but change language or restart the iPad or it's like restarting the application (kick out of the home screen),

  I thought it happened to MS only the product, but when I connected my Apple Magic Keyboard, the same thing happens!

  Difficulty please, Apple!

• MacBook Air 13 inch screen keyboard brands

  I just bought a macbook air for the College and as anyone who has already purchased an expensive product, I want to take good care of it, then it will last me a good amount of time (at least until I've finished law school). After some research on the web, it has come to my attention that the keyboard can scratch the screen when the laptop is a full backpack (quite a typical scenario in the lives of students). Should I put a cloth Microfiber between the keyboard and the screen when I close the laptop or should I invest in a screen protector or is my stupid just afraid with no. anchor in reality? Thank you in advance!

  Do not use Palm or Cap covers on a MacBook Pro with Retina - Apple Support display here, is what Apple thinks about it actually, I guess that the cloth would increase the pressure and it can cause more damage, especially if it's the MacBook Air. And I also think that a cheap and quality product should not damaged so easily. Worry is not about this, your MacBook is self-sufficient

• How can I reformat my Air of 2010

  My Air becomes slow and shows erratic numbers for storage, so I want to wipe the hard drive and start over.  I deleted all the important files, so I just need to know the process.

  Thank you

  PK

  Given that you run El Cap just restart your computer while maintaining command & R keys until you see the Apple icon. This will reboot the computer in the recovery Partition. Then launch the disk utility application to erase the hard drive, then download and install OS X.

• Stop problem with MacBook Air

  I have the 2012 of 11 inches, i7 2 GHz Air running OSX EL Capitan 10.11.5.

  Since the installation of El Cap, I got bad to close the Air. The toolbar at the top (the one containing the logo apple etc) goes away after I clicked on "shut down" and freezes the process of closing. So I should stop by pressing the button "on" for several seconds. I'm fairly certain that there is no APPS open and I tried different remedies offered on the internet.

  I am now at a loss what to try!

  Everyone knows about this problem?

  Does anyone know a cure?

  Thanks in advance!

  Once you start the shutdown process by clicking the Apple logo in the Menu and then "stop" bar in the resulting drop-down list, you should see:

  

  Do you see that?  If so, exactly what to do and what do you see?

• MacBook Air 11 Facetime camera does not

  A friends MacBook Air 11, model A1370. After the installation of El Capitan the facetime camera has stopped working (No. Camera work icon is displayed in all applications). I tried all the solutions I could find:

  • Reset SMC
  • Reset the PRAM
  • sudo killall VDCAssistant & sudo killall AppleCameraAssistant

  Nothing seemed to fix it, so we left in East. And then surprise, after I installed a Digital Camera RAW compatibility update the camera started working. But our happiness was short-lived, after having put the mac to sleep it stoped working again. I have tried everything but no luck.

  I suspect that there is a process that runs after an update is installed, that somehow erased the bug in the operating system and that was why the camera started working.

  Does anyone have an idea why a camera raw compatibility update started the camera, or why it does not work? Thank you.

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.8 ("Mountain Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy text from a particular web page (not this one) to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name ("Terminal") in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appear - again, usually within a few minutes. If you don't see this message in about 30 minutes, the test probably won't be completed within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something.

  In order to get results, the test should be allowed to perform or be stopped manually as shown above. If you close the window of the Terminal, while the test is still running, the partial results will not be saved.

  11. when the test is completed, or if you manually stopped, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. When you are finished with the test, it is gone. There is nothing to uninstall or clean.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but all that you can not be. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  15. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• My new Macbook Air freezes often

  Hi, I bought this new 13 "macbook air with 8 GB of RAM a week ago, and it freezes about every 2 days (usually when I use Safari).

  Why does this happen? What can I do?

  It's OSX version 10.11.4

  To be exact, it freezes on the screen, but on which the mouse and keyboard (even the little light on the "caps lock" is not responding)

• AIR-LAP1242AG bandwidth issue

  Good afternoon

  My name is Dave and my company has designated me to solve a problem with the signal from a controller of 5508 WLAN several (maybe 12) AIR-LAP1242AG in a warehouse.

  We currently use a unique anntenna of 5 GHz, but are studying other options.

  The question we have is the intensity of the signal.  We use guns scan to Windows CE and the wireless is weak at best (even if you mount directly under the access point.

  Since I'm new on the job, I'm familiar with our topology but will do what I can to solve this problem.  The question would be a combination of power, the strength of the antenna and something in the dyacceder the signal to controller?

  The ceilings in the rafters of the warehouse are between 25-30 feet.    I'll be happy to help anyone who might be able to steer in the right direction.

  I have yet to look at the console of the AP, but I wanted to eventually get some ideas.

  I thank very you much for your time and your consideration for our problem.

  Sincerely,

  Dave P.

  David,

  You will find your problem Sir...  If you are infact using the AIR-ANT5135D-e, which is a 802. 11 antenna, your problems is not on the AP to the radio antenna to your.

  Note here the specifications say it's an 802. 11 b / g radio in the scanner, which is 2.4 Ghz.

  Falcon 4420:

  SAP certified - integration with SAP

  GS1 databar compatible

  Microsoft Windows® THIS 5.0 or Windows Mobile® 5.0 operating systems
  area wireless 802. 11 b/g CCX v 4 certified network<-------------------------------- see="">
  XScale microprocessor
  128 MB RAM / 128 MB of Flash memory
  Bluetooth® wireless technology
  Management of Datalogic (MISP) utility and Datalogic Desktop Utility (DDU)

  So you will need to add antennas for the 802. 11b / g side and you cannot use the antenna in place because it's specific frequency.

  2 of this antenna - AIR-ANT4941

  or this antenna - AIR-ANT24020V-R = 1

  I hope this helps... Please evaluate the useful messages.

  Thank you

  Kayle