Aironet AP 3600 series Installation details

Similar Questions

• HP Deskjet 3600 series. Initializing ink cartridges? More than 3 partners? s

  Hello:

  I was recently offered a printer HP deskjet 3620 or 3650. I have only the manual for it to 3600 series moment.

  There are 27, 28 & 58 ink cartridges.

  My questions are:

  1} require initialization of ink as many HP printers do or can I use regular cartridges. The original inks disappeared somewhere in transit.

  2} If initializing cartridges are required are they still available?

  3} it is my understanding that this printer has never been created or had it ink.

  y at - there a way to tell if this is true? There is now no cartridge inside and it appears unblemished, even if all the original packaging has been removed.

  4} am I correct to assume that if the ink cartridges installed previously to a point that this printer is useless that the print heads are probably blocked.?

  Please notify.

  I saw this place is around the same time that your other post.  If you just want to know about the initial optimization process of your printer for the best performance?  To install ink cartridges are available and are used to prepare the print head, but are not absolutely necessary.  You don't have to contact HP for Setup ink cartridges for him.  You can call technical support at 1-800-474-6836 (US) or follow this link to get the phone number for your country and ask them to order it.  Or call 1-888-999-4747 HP Home and Home Office, but I don't know if you can get them at the store. Just as a previous tech support agent I know I could order setup of ink cartridges.

  A lack of alignment can occur if you do not use the first time ink installation cartridges, but I doubt it.  There is no way of knowing if she has never had ink in it before without having already inked and install on the computer in order to access the Toolbox and then choosing to print a test page that may have this information on it.  On newer models,'s called it a Printer Status Report.  It will tell you all about his prior use.

  I don't think the printer hangs another ink in there if there is no ink installation cartridges installed the first time.  I don't know the refilled ink cartridges may damage the print head, but I think that you will be sure to use regular ink you'll be safer if you call, your printer is in or out of warranty.

  Here is a nice little document all about these issues and much more.  I hope this helps!

• Need driver for VGA controller Intel GMA 3600 Series Windows XP Operating system

  Original title: Driver needed!

  How can I get a driver for my VGA (Intel GMA 3600 series) controller for windows XP Home SP3? The device ID is

  PCI\VEN_8086 & DEV_0BE1 & SUBSYS_C629144D & REV_09\3 & 11583659 & 0 & 10.
  My computer is a samsung netbook. Model N102SP

  Hello

  Sure enough. I even downloaded and extract the Windows 7 drivers to see if there is evidence of support for XP, but it was not.

  You can always try to install the Windows 7 drivers to see what is happening. But I expect that the installation routine will check for a valid operating system.

  If you do not experience, first define a point of restoration in the event of adverse...

  http://support.Microsoft.com/kb/948247

  .. then you can come back if necessary...

  http://support.Microsoft.com/kb/306084

  Tricky

• Cartridge printer error message HP Office Jet 3600 series

  Original title - HP printer Office Jet 3600 series

  I had a paper jam. I cleared the jam and now I am getting a cartridge error message and I keep out cartridges and put back them, but the error message still cant clear. How can I clear this error and get my printer to start printing.

  Hi SueAmmons,

  To provide the proper resolution, that I would need more information on your side.

  1. What is the number of the printer model?

  2. What is the accurate and complete error message?

  3. what version of operating system do you use?

  I suggest you try the procedure described in the article and see if it helps.

  Error message "Incorrect print cartridge" appears on the monitor screen
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00249451

  If the problem persists, I suggest you to contact HP Support.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

  Hope this information helps. If you need additional help or information on Windows, I'll be happy to help you.

• Aironet 1100/1200 series and Windows

  Is it possible to use the Windows IAS Radius with Aironet 1100/1200 Series light? If yes are there problems you may need to pay attention to?

  Respectfully

  You can use the server Radius IAS for LWAPP. I'm not aware of any questions.

  Someone else can add to this.

  -> Sushil

• Satellite Pro 4300 series installation of Windows 2000 Professional

  Hi guys!

  I was given a 2nd hand Satellite Pro 4300 notebook PC series of my brother. Its shows be quite slugglish (over the start time of 20 minutes). I think I'm a format and a new installation of windows 2000 (windows 98se running sound) may be useful. However, I don't have the original recovery disk, although I own an original copy of Windows 2000 Professional.

  Would it not be possible to do a full format and install windows 2000? Or would I meet problems, for example with driver problems, later? I know computers cell phones can be a bit of a nuisance when it comes to facilities OS!

  Any help and advice would be much appreciated!

  Thank you!

  FONZ

  Hello

  Your machine should work very well with Win2K - Toshiba have drivers available for download.

  Kind regards

  Nick

• Model No.: HP Pro3500 series: installation wouldn't work

  I check my historical update. It has a list that States fail to install update. What may be preventing this problem.  Windows 10.

  Model No.: HP Pro3500 series
  
  Product #: E3T54UT #ABA
  
  Serial No.: [personal information]
  
  Software update #: 11WWSNAW602 #SABA #DABA
  
  Service ID #: 032-916
  
  PCBRAND: HP

  [Personal information]

  What is the full name and the number KB ('knowledge base') of the update which is identified as "default"?

  How many times it is listed? On what dates?

• Complete installation detail 8 Win Pro on a Lenovo system provided with Win 8 Standard/Core

  Hello

  So I have a Thinkpad Twist supplied with Windows 8, and I am trying to reinstall Windows 8 Pro on. I have a copy of win 8 OEM Pro and I don't want to buy the upgrade, since I already have the full version. I want to put this machine on a field in my test harness and can't do that running Windows 8 Pro.

  So, I booted from a USB DVD and installed the operating system, but once it was installed, I noticed that it was still the standard 8 Win. So I tried again, with the same result. When I reinstall it I am partitioning and formatting all two by car on the twist, so I don't know why, it's back to standard Win 8. Also when I install Win 8 Pro he never asks me a key, so something is strange, and it shoots this info to win 8 old standard somewhere.

  I went into the BIOS and noticed there is some security settings to avoid you to install a new OS. So I've disabled all the people and tried to install it again with the same result. I don't understand.

  Anyone know how to completely clean the discs so that I can just do a clean install of Windows 8 Pro? Or what are the settings that I need to change in the BIOS so that he can let me do a new installation? I worked on it for more than 8 hours... start pulling my hair.

  Any info would be greatly appreciated.

  Thanks for the input guys. I ended up finding the solution here...

  http://support.Microsoft.com/kb/2796988

  I had to perform an unattended installation that replaces the product key embedded in the Flash of the BIOS.

• HP PhotoSmart Prem 310 Series: Installation on PC Windows 8.1 HP solutions Center

  My printer is a model 310 that I bought in 2011.  The DVD accompanying installation supports Windows XP, Vista and 7.  The version number of the DVD is 14.4.0 and I used it to try and install "HP Solution Center" on my new PC for Windows 8.1.  What I get is a picture of a building with a few plants in a pot by the door and and a sign in front of the building that says "close this application".  On the left are the words "select install to begin the installation of your new HP device."  The problem would then be is that there is no click a button "install".  The only button I can click is 'out' and it then closes the installation.  I think I need a Setup DVD update sent to me or instructions on where I can download the installation of HP for Windows 8.1 solutions Center.  I don't have a problem with printing because my PC, the printer has detected and installed the drivers from printert.

  Thanks in advance,

  Ed

  Hi Ed,

  Of you can still have problems, download and install the software from the following link:

  http://ftp.HP.com/pub/softlib/software13/COL59888/MP-143684-1/PS_AIO_07_C310_FSW_Full_Win_WW_140_408-4.exe

  Before installing the drivers do not forget to open the control panel > devices and printers.

  Right-click any existing C310 icon, and then select Remove an instrument.

  Once that icon removed turn the printer off, only turn on once the installation request to connect.

  Kind regards

  Shlomi

• HPDESKJET 2540 SERIES installation problems

  Dear Jabzi

  I installed the Windows fix as you suggest, but I still get the error at the end of the installation process.

  With regard to the second option (GPEDIT. (MSC), this tool is not available on Windows 7 Home, which is my OS, so I did not try it. What can I do?

  Thank you very much.

  Hello

  Windows 7 Home editiion has no GPEDIT.

  However, please try the steps below to print at least.

  Click START > device and printer > add a printer > add a local printer >

  (if the printer is connected with USB)

  Select "Use existing Port" then Virtual USB from the drop-down menu, click on NEXT, in the production list, select HP / Hewlett-packard and in the right pane, select Deskjet 6980 and finish the wizard

• Windows Vista 32-bit. The printer HP Deskjet 3420 (3600 series) will not work.

  Hello

  I tried to install drivers several times, and they all install. When I plug in my printer to the computer recognizes the printer, and it seems that the printer works. But as soon as I try to print a test page, it does not work. I think it may have something to do with the configuration of the printer driver. Any help will be appreciated.

  Thank you

  Mark

  Hello
   
   
  Method 1.
  Try to run a Microsoft Fix it that automatically diagnoses and repairs printing problems, installation of a printer, connecting to a network printer and other related errors.
  To do this, go to problems with printing and printing errors on the Microsoft Web site and then click Run now.
   
  Method 2.
  Clear printer spooler files and activate the spooler service
  Stage I.
  a. Click Start, type "Services.msc" (without the quotation marks) in the Open box and click OK.
  b. double click on "Printer Spooler" in the Services list.
  c. click on stop, and then click OK.
  d. Click Start, type "% WINDIR%\system32\spool\printers" in the opened window and delete all the files in this folder.
   
  Step B
  You must be logged on as administrator to perform these steps.
  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  b. double-click on Services.   If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click on the print spooler service and then click Properties.
  d. on the general tab, next to startup type, make sure that automatic is selected.
  f. e. the service is not already running, under Service status, click Start and then click OK.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
  For more information, refer to the article below.
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
  
  Method 3.
  If the problem persists please use The utility of diagnosis HP Printto find the root cause of the problem.
  
  See the link below for additional information and steps.
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02114788&tmp_task=solveCategory&LC=en&DLC=en&cc=us&product=3940574
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• EX Series - Installation Service

  Maybe, I can't see the wood through the trees. If you configure several service installation how end users access them? First installation service is for example the assistance service that appears on the touchscreen controller, but how those remaining is available?

  Thanks in advance.

  Hello

  The other 4 are there more for system integrator.  If you use an external 3rd party controller, you can use the commands and integrate it with your own touch screen. But it's easier to apply if you are using the Integrator codec.

  Kind regards

• Cisco Aironet AP 2700 Series (Autonomuos Mode / stand-alone Configuration)

  Hello

  I'm trying to configure an access point and as a result of this video:

  https://www.YouTube.com/watch?v=5RE55VBsyDE

  If I do exactly what is mentioned in this video, I am able to configure the AP. On some client Machines AP is available while the other cannot find newly created SSID (even me, I chose broadcast).

  1. why it is as some Machines cannot reach / find the new SSID (all machines are close to each other).

  2. how to deal with frequencies or the beach or is - that something will be automatically corrected by AP?

  3. How do internet connection with AP?

  4. currently, I have an Asus wireless router, I need plugin cable of this wireless router and connect AP?

  Can be :)

  Like I said in the other post that some client can support only 2.4 Ghz!

  Concerning

  Remember messages useful rates

• number of series/installation problem

  I have a standalone version of the lr6 recorded on my adobe account. Its already installed on your laptop. It worked ok for a few weeks on my iMac, but now I get this error message when I try to load it on my imac

  < image with partial serial No. kglad removed >

  Help, please

  regrads

  Steve

  If you have not activated lr6 on two other computers and have not broadcast your serial number, contact support from adobe for hourly pst by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

• Defining a 1852nd Aironet AP - Radio Off - Cisco IOS 12.3 (4) JA

  I have a brand new Cisco Aironet 1800 AP series I'm trying to install. Specifically the 1852E. I do not have a controller and try to use the method of deployment of mobility Express. When I received the unit there is a yellow label more precisely declaring outside: "OFF BY DEFAULT note RADIOS: radios are disabled by default for Cisco IOS releases 12.3 (4) JA and later.

  If anyone can please tell me how I am supposed to this access point configuration when the radios are not suite, so the CiscoAirProvision SSID is not broadcast?

  I tried the following:

  1 connect the unit to my PoE switch. Unit Gets power and discovery mode starts (red/orange/green light cycling). He succeeded receives an IP address from my DHCP.

  2. when I try to access the device through my laptop via the local LAN it just times out. Pings meet.

  I apologize if my post seems harsh, I am quite agitated that even after having spent more than 5 hours trying to troubleshoot and get this thing to work, there was nothing else than a nightmare (both for the installation of touted 10 min). I do RTFM. I missed something simple jumps? or am I just to assume that Cisco has really missed the boat the patch appropriate for an assignment in their literature.

  FOR INFO. Thorough searches Google and research on this forum gave me no help.

  Thank you.

  Convert a CAWAP AP an AP express mobility