Airport Express which runs from the BT Home Hub

Similar Questions

• no more WiFi which extends from the airport express and Time capsule

  I have no more WiFi which extends from the express airport and Time capsule.

  and once it worked...

  airportconfiguration-app also works, but the graphic display allows to have a straight white line. now, it's one interrupted...

  Your unbroken lines in airport show connections ethernet utility... broken lines show the wireless connections.

  So it depends on the extend method you used.

  I think at this moment, things are configured wrongly... for some strange reason things happens and elements on a stand-alone basis, return to a default mode.

  The best way to manage it is full factory reset on everything... and repeat the installation.

  I have no more WiFi which extends from the express airport and Time capsule.

  It seems to me that you extend a NON-APPLE router... in this case, your Apple routers must connect by ethernet and create a wireless network. Routers Apple cannot extend the NON-APPLE router wired.

  The express could extend the TC or visa versa... by wireless...

  Then I suggest say us what is the main router in the network?

  You have connected by ethernet to the TC or Express or both?

  If so please reset completely the two elements and try again. Make sure they are in bridge mode... It's the network tab. Router Mode is turned off.

  

  And your wireless tab is configured to create a wireless network...

  Use the same name (SSID) and even the security setting and the password as the main router to network roaming (extend wireless ethernet).

  If the Express and transport CANADA are the same, both will have this configuration... If the express extends to wireless then it should NOT be connected to all the way to ethernet... (sequel to wan side at least) and it will be set to expand wireless on the wireless tab.

• I have an Airport Express, which gives an unexpected error message when you try to connect to an existing network of WEP.  Any ideas.  Tried the factory returned. He was knocked offline when someone dug into the telco cables.

  I have an Airport Express, which gives an unexpected error message when you try to connect to a router WEP (Verizon) existing iOS9.3.2

  It flashes orange, but can not be reconnected to the router or to the title of the Setup Assistant or Airport utility.  Is there a way to reconnect to WIFI or should I bite the bullet and connect via Cat5e and be done with it.  My VPN works much better without AirPort Express connected.

  Sorry, but there is no WEP settings AirPort Utility on the iPhone or iPad, or any Mac version of AirPort Utility which was used for the last 4 years or so.

  If you have an older Mac still running AirPort 5.x utility or a PC with the AirPort for Windows utility installed on the device, the WEP settings that could be used to get the Express to connect to a WEP network there.

  As you know, WEP has not been secured for a number of years, and there are any number of free utilities available on the Internet, which is crack a WEP network in a few seconds. Thus, all those who want to be on your network will not have problems to do very quickly.

  But it's your call.

• How to test the signal strength of an Airport Express, which extends a network?

  I am trying to understand how my Airport Express is actually help to expand my network, and if I should move somewhere different. Any help would be appreciated!

  Current situation: my base station is an AirPort Extreme in our apartment computer room; for the internet, which is plugged into the wall. The wifi network is extended in the living room via an AirPort Express (version 7.6.4). There are on the same cabinet as the AirPort Express to Apple TV. The Airport Express has an optical cable connecting to a sound bar (which has an additional HDMI connection to the TV).

  I don't really know if the AirPort Express Terminal, he does something useful. The network is set to be extended, best I can tell: Airport Extreme network Mode is "Create a wireless network", and network Mode of the AirPort Express is "extend a wireless network. But still, the wifi on my iPad and iPhone signal strength seem to fall much in the living room. Apple TV usually broadcasts music from my desktop computer (in the computer room) well enough, but if I try to play music from my computer via the Apple Express at the soundbar, the connection is terrible and fall. (Which could be a problem with wifi, or could be an aging Airport Express question, could be a cable problem or might be a sound bar problem...)

  An example of what worries me: if I go to the Airport utility on my iPhone and a glance at the Airport Extreme, it has 4 Wireless, including Apple TV clients. But if I look at the AirPort Express, there sometimes a client wireless (iPhone), but never shows the Apple TV: even if the Apple TV is about 30 cm of the Airport Express. It's as if the 30cm distant to the Airport Express connection is weaker than the connection of two-rooms-distant Airport Extreme, but I am probably wrong that.

  In any case, is there a way to test what speed is through the AirPort Express, compared to through the extreme? I tried to use applications like CloudCheck on my iOS devices, but those only measure the speed of my network, and it is unclear whether or not he uses the Extreme or Express.

  Thanks in advance and all apologies if I used (almost inevitably) 'Express' when I should have used "Extreme", or vice versa, somewhere at the top.

  One way to see the strength of the signal is the Alt (option) key while clicking on the WiFi icon in the menu bar.

  But you see not directly related to the airport of arrival. Also the Airport utility does not give much information.

  You can see a lot more with the free app (Appstore) called "WiFi Scanner".

  The problem could be that the place you have chosen for the Airport Express can be better: it should be somewhere in halfway (in force) between the Real and where you sit with the iPad/iPhone.

• I had to do a clean install on my pc under XP sp2 and install windows 7. I saved my CS4 extended files but it wont let me install from files, it is said to run from the original disk which I can't find. My product key is on my Adobe account

  has had to do a clean install on my pc under XP sp2 and install windows 7. I saved my photoshop CS4 extended files but it wont let me install from files, it is said to run from the original disk which I can't find. My product key is on my Adobe account. Can I make a download for my product on the Adobe Web site, which is not a trial? It all started with the upgrade of my other pc for windows 10... long story. I have the disks Creative suites 5 and 5.5 but this pc is only 32 bits, and the only one that works with my Epson Stylus pro 4800. Help please

  kglad links in response to #1 here can help https://forums.adobe.com/thread/2017859

• Airport express - is no longer the network extension

  For six years, took the extreme of the airport, with two Airport express network expanded throughout the House provision.

  All are online and update - 7.6.7 is later / current version.

  Airport express kitchen spent all-day orange with the warning - "unable to extend the... wireless network." "flashing

  I tried to restart - power off/power on, then a reboot via Airport utility.

  Then I completely reset the device to factory settings and reconfigured back to expand network through the Airport on Mac utility.

  I still have the same problem!

  Tried to contact Apple support, telephone support is obviously expired but still difficult to write, call, or buy an extended support, I am stuck in a loop with: "we're sorry. We are unable to respond to your request at this time. Please try again or come back later.15696390-8f63-4da2-816e-f58a820d350d'

  Would appreciate some advice from the community? Could avoid resetting the Airport Extreme that I didn't have to go to the length of the reconfiguration of the entire home network and services... !

  Thanks in advance.

  Powering two devices of the AirPort Extreme and AirPort Express

  Wait a minute

  Turn on the AirPort Extreme and run a full minute

  Then, turn on the kitchen Express and run a full minute

  Check the network

  If no luck, repeat the same procedure as above, but perform a hard reset on the Express before attempting to set up again

  If still no luck, the age of the Express can come into play. The average useful life of the Express is about 3-4 years.

  Try the 'other' Express in the kitchen. If it works, then you know that your "old" kitchen Express must be replaced.

• put Airport Express before or after the switch?

  Believing that it is preferable to wire as much of my LAN House as possible, I ran ethernet in all the House of my office (where desktop computer, printer and modem/router DSL reside) in my living room (Roku, Apple TV, etc. where).  The living room is also where wireless laptops, iPads, generally used smartphones.   So I'll have a (Netgear GS205) switch in the living room and an Airport Express station.  It doesn't matter if readers (of the office) ethernet switch, which results in turn the Roku, ATV and Airport Express?  Or better to attach the ethernet to EI and continue the switch port LAN on EI?

  Any reason, that I should consider to put the modem/router in the lounge and the switch in the Office?

  Netgear GS205 is a Gigabit Ethernet switch, so it will load 1 000 Mbit/s connections.  The AirPort Express has only 100 Mbit/s Ethernet ports, so if you plug the Ethernet cable from the Office to the AirPort Express, and then connect the switch to the LAN port on the Express, the ability of the switch 1 000 Mbit speed <-->/ s will move to 100 Mbit / s for all connected devices.

  All wireless on the Express will also drop up to 100 Mbps.  So, you might think that you have a 300 Mbps wireless connection, but this connection will drop up to 100 Mbit/s, through the Express.

  Not too exciting, but not a killer in the face if all devices that need to connect to the switch are only 100 Mbps devices compatible.

  It would be better wiring practice to connect the Ethernet feed from the office to the Gigabit Ethernet switch and then connect devices to the switch. Here, I guess that the Ethernet feed office is actually Gigabit Ethernet to 1 000 Mbit/s.  1 000 Mbps or Gigabit Ethernet ports should use any modem/router of good quality.

  If the modem/router that feeds the switch is only 100 Mbit/s capable, then you can connect things like what you want since the maximum speed on the network will never be above 100 Mbps in any case... and the Gigabit Ethernet switch will work on only 10% of its capacity.

• Problems connecting to an AirPort Express, which already extends another Express.

  Hey everybody, I just want to know if it is possible for an Airport Express to connect to an OTHER Airport Express which is already expanding an Airport Extreme.

  Post edited by: Kas1302

  It is possible for the Express to connect to another Express which is the extension of the network already... BUT... the 'last' Express will not extend the network once again, if that's what you're really asking here.

  This is because Apple doesn't allow the wireless signal to be extended only once, not two.

  It would seem that the last Exrress is the extension of the network, but it is not.  It is 'join' the wireless network, and when he "joined", it doesn't provide any additional wireless signal coverage.  However, the last Express could still work for AirPlay, or a USB printer remotely.

  Feature of "extend" Apple works as the hub and the spokes of a wheel.  The main router is the 'hub', and an Extender would be located at the end of "sticks". As such, he communicates directly to the main router.  You can have multiple devices, the expansion of the network at the end of the other rays, but each Extender must communicate directly with the main router.

• Capsule of the airport is not accessible from the internet

  Capsule of the airport is not accessible from the internet

  He could be reached at any time and has now stopped working?

  How have you tried?

  Three common methods... that you use?

  Airport drive - remote (3 methods)

• How a LabVIEW application can be run from the account invited in Windows 7?

  I want to do some of my labVIEW available visitors to temporary applications (no DAQ or involved external devices) in the laboratory. A natural choice would be the guest account in Windows 7, but if I try to run LabVIEW or one of my LabVIEW applications built, I get the following error message.

  

  I don't know that this can probably be fixed with a few permission settings. What is the best way to enable these applications running from the guest account?

  I think that the easiest thing would be to create another user account and set the permissions on that if guests are unable to get into the stuff you don't want them getting into.

  http://digital.NI.com/public.nsf/allkb/88F3CCEBB08AFA6D86257A00006F21D5

• (Initialization error: cannot load fileSysCheck.cfg Make sure that Call of Duty: Modern Warfare 3 is run from the appropriate folder). "

  After installing this game on a dell Inspiron 1545 computer, when I try to run the game, it starts to market and then, this error message

  "Error during initialization: failed to load fileSysCheck.cfg Make sure that Call of Duty: Modern Warfare 3 is run from the correct folder"

  By Teknogods

  If it is a file that may be missing I will have to check see if I can find it online.

  All the tips are more grateful, thank you.

  Teknogods is the source of the problem, not the game of basic or Windows.

  When using mods, that you'd better ask your question on the Teknogods or similar modding forum.

  .

• Right-click DeptEmp.jsf and select run from the context menu

  Hello
  
  Please consider article Oracle Magazine "Catch Me If You Can ' Frank Nimphius
  at http://www.oracle.com/technetwork/issue-archive/2013/13-mar/o23adf-1897193.html
  
  In the article, it is offered several times to
  «... Right-click DeptEmp.jsf and select run from the context menu...'.»
  When you use JDeveloper 11.1.2.3.0 it will result in JDeveloper starting a browser requesting a URL "/ faces/DeptEmp" (without ".jsf").
  (Note that in the sample adfc - config.xml has a view with the id "DeptEmp" activity, but for pages without an activity view corresponding to the stream of unrelated task (adfc-config.) (Xml) JDeveloper starts a browser requesting a "/ faces/otherPage.jsf" URL (with ".jsf").)
  
  Still, I wonder if we should really run (JSF) pages, or rather an activity view in the flow of a task?
  
  After running into issues with calling (JSF) page URL rather than controller unbounded ADF task flows view activity URL in another forum thread [1], I try to avoid pages (JSF) (execution of the task-flow unlimited instead) running.
  to Re: login after logout is not possible using af: commandButton

  John Stegeman wrote:
  ... especially since it is very common for people new FAD (and indeed no-so-news-to-ADF people like me) to run their app via a page rather than the workflow and then wonder why it does not work :)...

  But also the Oracle documentation seems to suggest that page running a (JSF) is the way to go (or "a" way to go), see the section "41.2.1 how to run an Application in Integrated WebLogic Server "
  saying: ""in the navigation Application, select the project, a task flows, JSF page or file as the target execution. ".
  at http://docs.oracle.com/cd/E37975_01/web.111240/e16182/deployment_topics.htm#ADFFD22047
  
  So, who is? Is there a preferred way to run? Running a (JSF) page "also recommended"?
  
  -[1] ' login after logout is not possible using af: commandButton.
  during the connection after disconnection is not possible using af: commandButton
  
  Thank you very much
  Jan Vervecken

  Hello

  Still, I wonder if we should really run (JSF) pages, or rather an activity view in the flow of a task?

  The recommendation is to run the activity. I think it's just my laziness to boot from the JSF file in the case of the article (and given my article only has a single page in the workflow unlimited I wonder if my attempt failed, if there was a need for a navigation to another view in the flow of unlimited work). The risk from a page directly, it is a physical implementation of a view that could be used by multiple streams of different tasks (although the common use of the stubborn workflow is to go with fragments of the page, always bounded task flows could be defined using complete documents). His recommendation that you start an activity to view pages in order to ensure the ADFc is used (I wasn't even not aware of 11.2.3 to automatically change request activity instead of the file if there is an activity of referencing).

  Frank

• How to create a rep duration of Reports10G file and run from the client side

  How can I do rep Reports10G file and can be run from the client side like report 6, 6i. I'd appreciate your quick response.
  
  Thank you

  If I remember correctly, the .rep files are 6i and earlier versions. 9i and later versions do not generate .rep.
  the 10g is no longer a client server model, is a model of web

  typical system:

  you have a server for your database
  you have a server for your application server (was RDF & .fmb (.fmx) files resident) is also your intranet.
  you have a customer

  the client uses a browser such as Firefox or IE to browse the intranet site. Oracle application server is your forms & reports a java plugin.

  hope this helps

• Airport Express. Connect to a router home without another device from the airport.

  Looking to buy an AirPort Express station. Plan to connect it to my home router to boost connecting devices and to create the network or guests. This work if I just plug my Express in the router with a cable Ethernet or you will take another product I.e. time capsule to work? The router can also activate "Modem Mode"

  What model is the modem?

  Comments wireless is disabled in all apple routers when they are used in bridge mode... This will mess up your idea to connect to main router... the express (or any wireless router) should then be in bridge.

  If you can fill the main modem... It is pure modem and run the express as a wireless router, then it can produce a network of comments as well... However, Express is slow and far from adequate as a main network router... unless you talk real slow ADSL etc.

• iPhone 6, connecting to the Airport Express wifi, blocking all the other wifi equipment.

  Hello

  My home wifi network, it's an Airport Express station. I then several other devices that connect to it - two AppleTV, two MacBooks, an iPad and iPhone two 6.

  I recently had to replace one of the iPhone 6 and every time the iPhone connects to wifi of the Airport Express - the connection made the deadlock on other devices. This forces me to turn off the phone's wifi and now I do the connections of the hanging of the other devices start to work.

  The new iPhone replacement to restore a backup to iCloud. I also then reset the network than the iPhone settings when I first noticed this wifi connection problem, but the problem persists.

  Thoughts on how to fix this?

  My solution, after two devices, and visits to the Apple Store Genius bar was to do a full reset of the device and do not restore from a backup.

  For the appliance swaps were probably not necessary had we done the software reset and restore from scratch first.

  Geniuses and I were not able to find the cause of the problem.