Alienware 15 fan

Just set up my new Alienware 15.  He sat for 90 minutes so I did the setup, downloaded the software, etc.  I have not noticed the fan turning and the base feels hot.  Is this unusual?  How many 'time' before the fan comes in?

install the BIOS A00 to reduce heat and don't worry if the base feels hot, it's because the PCH is in this area

It is a pch file, looks like a CPU.

HWmonitor lets look at the time of your laptop. Don't worry if do not pick it up over 85 ° c.

Tags: Dell Products

Similar Questions

  • Alienware 13 fan does not slow down

    After it cools, unless I open nivdia Control Panel does not slow down the fan Alienware 13, once the nivida control panel open the fan then starts to slow down.

    Update November 2016: the latest Nvidia driver solves the problem, fans now work as expected.

  • (Redirected) For the broken r2 x 51 alienware CPU fan

    Hi, does anyone know where can I get a new fan of alienware x 51 r2 processor in kl area or online? In fact, my fan still works, problem is the cover of the heat sink. The part of bolts is broken. Can I get the part of the heatsink onli or I need to buy an equipped fan?

    Best of this post in the Alienware owners Club Forum, here:

    http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

    Bev.

  • Alienware 17 fan question

    Hello! I bought an Alienware 17 and had yesterday. I am extremely satisfied! I love this system! Although one must get used to the new user of Windows 8 interface, I really like my time using the Alienware. However, I have a question about fans...

    While using the laptop for heavy tasks, I think air broadcast by the fan on the left and not the right because I spent $3,000 on this laptop, I want to make sure everything is in good working condition. I was wondering if this is normal or if it is a malfunction of my hardware. I have not yet garguillo on this for more than ten minutes directly, but still when the left fan is turned on, the right is not. I didn't know the good fan fan the air once again yet! So I was wondering if the right fan turns on automatically after there is a certain amount of load on the processors or if it is a real problem.

    Please answer quickly please!

    Here is my solution. Read all about it.

    In my opinion, Alienware laptop computers are skewed when it comes to their fan profiles. It's just like that, I'm afraid, but there is a way around. Like you, I bought my laptop (M17x-R4) fans has worked, kicking in full power when I played the games. But now they have not. Who knows why. But in any case, the solution is to download speedfan NOT fan control software. Download Hwinfo. The updated link here.

    Then you can control two fans at the same time (you can't control them separately). I'm able to put my fans at 5000 RPM. First, you open the program, click "sensors", and then at the bottom are a small fan icon. Click and you can control your fans. Choose a speed, then click the 'manual' button that will set the speed. If you want to return to normal, click «auto system»

    Now, here's the problem. It all seems too good and easy, well it's because theres more than that. some laptops like mine, stops when you play a game and the fans are controlled by this program. but there is a difficulty. You must go to 'program' then 'settings' in the 'security' tab you uncheck the box 'Support' and then you have no more accidents. But what makes Community aid, it allows you to change auto manual system fans. when its not checked, you can not pass, then set the manual speed first, then uncheck THIS support and're you good to go. If you want to restore auto system, check the Community aid, and then select auto system again.

    That's all! Fixed. Now, you need to be wary of your temperatures, if I put my fans too weak such as 3000 or same 4400 my CPU was running hot enough, but this average time for me are usually in the 90s when you're stressed anyway.

  • Export of Alienware CPU Fan

    Dear community Alienware

    Intro:

    Four days ago the fateful date were to occur, my 5 year system, bitten the dust, quite literately... dust so hidden in this case. So I got a new motherboard and a new case since there was unfortunately no more.

    So I wanted to save all even remotely from my old pc, as a souvenir, and since I don't see the point of throwing things that work.

    Question:

    How can I export my alienware cpu to my new system. Unfortunately the cpu pump seems to be a 'special' alienware, and I can't seem to know all decent positions if it's important or not. Or how to reconnect somehow. my current fan is the basic intel cpu fan you get for free and it is quite wrong to say the least.

    Other data:

    All parties except for the motherboard are always available.

    New motherboard is the: msi z97Gaming 3 (yes I know, 3rd world country I am living, not really any decent other options)

    available heatpaste, the fan fits after a few changes of detail. (to the metal ring, I didn't touch the fan itself)

    at the end:


    Thanks in advance for any response, even if it's a soul crushing "he died mate, let her rest."

    Best regards, darkminaz

    You cannot use your alien-cooler, unless you cut the 7 pin connector, cut the wire, tie / crimp on 3 new terminals & insert correctly into a new connector for fan 3 pins:

    online stores pc etc.

    If you cannot do this, or someone do it for you, sell your cooler, buy a new cooler liqwid, Corsair, Antec Zalman, what you prefer. Donate your old stop, recycle, pass it as a gift or sell online, selling yard, colleague, etc.

    Your cpu is not a 1150, so it cannot go into the Z97. Sell everything you can to help him to pay the new rig...

  • ALIENWARE R4 - fan noise problem. HELP PLEASE

    Hi guys I Alienware R4 with BIOS A9 and since I updated windows in 8.1 I have some problems of fan.

    The problem of fan makes me really nervouse because I solve the problem by running the installation with the option of Lair and basically I do it whenever I turn on the computer or when I turn standby mode.

    I also have problems with temperature sensor and they get it fixed each time that I reboot.

    The temperature that I get is 0 ° - 0 °-65 °.

    We hope to get good and fanst answers.

    C are

    PS: Problems of temperature and fan are not not connected because crazy fan even when the temperature is ok!

    Hello

    Sorry for my English: i ' l French (nobody is perfect! )

    I had the same problem with my Alien Aurora R4 using Windows 8.1
    Impossible to set up the speed of the fans using the auto mode. 2 fans operating at 100% then the wer to low temperatures.

    I fixed this problem by uninstalling my 'Command Center' program, download the special windows 8.1 "Command Center" here:
    http://www.Dell.com/support/drivers/us/en/04/DriverDetails?driverId=P1K0M I downloaded the file called App_NT_AWCC305010_W8_W81_W7_Setup_P1K0M_ZPE.exe

    and I restarted my PC after installing the new program of Command Center.

    Now, everything is OK: Fans are runing with a low speed using the auto mode.
    I hope this will help you.

  • Alienware 14, fan only runs on start & everything seems to be fine

    I just upgraded the i5 CPU 4200 m to i7-4700mq myself. It starts fine, but after about 10 min running windows I noticed that the fan does not turn.

    I restarted to check and noticed only towers for about half a second to start, stops completely when it reaches the bios menu at the head of alien.

    Then I turned it off and start looking for solutions, won't damage the CPU...

    What seems to be the problem?

    Hello!

    HWmonitor allows to control the fan and CPU temperatures. Try to re - install the control centre Alienware and updated to latest BIOS A09.

    If the problem persists, run an ePSA Diagnostics to check for hardware errors.

  • MIO Board is dead

    Hi all

    Is there something that can be done to get control of the Alienware Aurora fans if Council MIO died? I have tried rivatuner and fan speed, but two of them seems don't work...

    I did clean re install Win7 disk resource and of course my MIO Board brick... no luck I didn't question with jury of MIO--> re installation of the system before...

    FX does not work, readings of thermal controller are disabled. I tried everything I could find on this forum. Light of Council MIO is on, but can not be installed. In the hardware Manager, I had this thing 'unknown device '... I gave up just really trying to repair it... now I want to just be quite - since I reinstalled computer system is terribly strong.

    @Cass - olé

    Thanks mate u save my life ^^

    After changing the map mio everything worked
    =)

  • (R5 Aurora Alienware desktop computer) loud fan noise

    Hi, I recently bought a desktop computer Alienware Aurora R5 for the games.

    It has graphics GTX 1070, 32 GB of RAM and i7 CPU.

    The PC itself is great and if I play movies/music or make internet surfing is very quiet.

    But if I try to make games with it the fan noise becomes unbearably high... almost like an airplane taking off.

    I updated my BIOS and DELL technician has replaced all fans inside the PC, but they do not at all help.

    Are there not in some way you can help me? Thank you in advance!

    -Peter-

    cs_setInnerHtml ('video_15ee1398-0950-443f-a83c-272dcde326f6', ");

    See a different but identical post here: Aurora-R5, noisy fan PSU with qwotes:

    CASS-Olé
    @MagR5 @Okumam > the final advice of the forum are-in your 30 day return window-, contact Dell & initiate the full return of your PC; When asked the reason for the return, tell them 'it's too noisy. " you don't want a replacement power, as you can imagine he will heal the issue & downtime doing an exchange of guarantee with the same party will strive to shorten your window of return etc. the Rep, now painted in a corner, should be open to a partial refund of $50. If you do it right, you should be able to guarantee a ~ $50 refund, & then shop around for a new power provide or seek a different fix for noisy here. Stroll in your transaction verbal with them, ready to back actually as a last resort, then order a new office with their 850 then go if it suits you while searching for a discount on a new one for your trouble. Most of the owners have now understood that a live chat or selling a can get a discount on a new element, where using their simple online by yourself cannot. Good luck
    Maverick1848

    Recommendation to receive a block of power SUPPLY from Dell free exchange:

    I use my Aurora R5 with an i7 7600 and GTX 1070 mainly for RVS with a live HTC and had the same problem with the PSU 460W fan revving up and down all the time without load on the machine (!) and open a folder with Dell online support. In the process, I could prove that the behaviour of the PSU is a systematic failure, which can be reproduced as follows:

    If you run a diagnostic self-test on BACK ePSA / bios level (press F12 repeatedly during the startup of your PC) during the game "memory test" PSU fan will do limit it sounds known. To make sure that it is not the CPU or caissons fans you can run the test with the case open, fan power supply sounds diffently.

    In Windows 10 If you open "Steam VR" usually the PSU revvs down, but as soon as you close (!) VR steam revvs fan power supply upwards like crazy for at least a minute without any load to the machine.

    Dell support yesterday confirmed they got the same systematic results and agreed to share the power supply to my home free of charge under warranty and a technique.

    During the debate, I'm going to scrutiny if the swap it 1:1 or replaced by another type of power supply.

    If your diet of nuisance is model D460AM, the above remedies / method implies that you may receive a repeat offender if they send another D460AM

  • Alienware 15 R2 fans turn for 2-3 seconds after logging in to windows

    Hello

    I have my Alienware 15 R2 system for about 1 week and I love it!

    There is a problem though I feel when I connect windows.

    After about 5-10 minutes after entering my PIN and connecting to windows machine suddenly freezes for a while (2-3 seconds) and the CPU fan runs at maximum speed then stops and the GPU fan. Since then sometimes not at all again. Only when I restart the laptop.

    Everyone knows what it might be?

    I updated the driver 530 intel HD as the GTX driver 970 M. The BIOS version is the most recent.

    Thank you very much for your time and help

    Concerning

    Mike

    Hi all

    I managed to solve my problem by downloading an iso file of Windows 10 of microsoft, the SSD of formatting and do a clean install of the operating system. I downloaded all the necessary software on my site of product. My Alienware 15 R2 works perfectly now.

    Thank you for your help

    Mike

  • (Redirected) Alienware x 51 R3, the cpu fan remains constant at 9%

    Hello

    I noticed the thermal control cpu fan turns around 1.1 k rpm, even when everything warms up to 80 c. Is there a way to increase the speed of the cpu fan? Perhaps other solutions for that?

    Best of this post in the Alienware owners Club Forum, here:

    http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

    Bev.

  • In any case to control the speed of the fan to Alienware Aurora R4?

    In any case to control the speed of the fan in Alienware Aurora R4?

    Hello

    You are running the latest version of the Bios?

  • Alienware 17 R3 fan control

    is there anyway to control the speed of the fan on this laptop?

    Hello

    We do not have any Alienware software that allows to control the fan speed. They are automatically configured. However, there are third-party software that you can download that allows to control the fan speed.

  • (Redirected) GPU Alpha Alienware fan stopped.

    Hello, ive been experiencing this problem for quite a while already, sometimes when I start my pc, it displays an error message saying that the gpu fan could not launch, then I run diagnostics and nothing seems to have a problem, restart the pc and no more error and everything beautiful.

    Now this trick no longer works, and the gpu fan does not start going which makes the turbojet go crazy (noisy one that never normally begins) and diagnosis displays the following:

    Service number:ADMIN NOTE: maintain the label removed by privacy policy >, BIOS A04

    Error code: 2000-0511

    Validation: 90731

    My pc is an Alienware alpha Intel (r) Core i5-4590 t CPU @ 2.00 GHz model with BIOS A02 ASM100

    How can I fix this without having to send back for warranty? I live in the Honduras and bought the pc in the United States, it's really difficult if not almost impossible for me to send the product back for warranty which expired on March 5, 2016.

    Better in this position in the Alienware owners Club Forum, here:

    http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

    Bev.

  • Alienware CPU liquid cooling and fans and power supply on the new motherboard

    Hello. Would be my Alienware Aurora R4 CPU liquid cooling and fans, and the power supply inside of light on a new motherboard which is in a different situation? Because my R4 Alienware Aurora case is too big and occupy us too much space, and my office is weak. Thank you.

    You can get a better response if you re - post it in the forum of the Club of Alienware .

Maybe you are looking for

  • Tecra A7 wouldn't start

    I'm just trying to start my computer.But when he is about to enter windows it stop and tries to start again. He keep doing this over and over again. There is a big problem: I can't lose the files on my computer. I hope someone can help me with this p

  • Update of the BIOS has not

    I got repeated messages that he needed to update the system. I chose the restart. The message says that the BIOS of HP has been rewritten. The end result was a Boot Device not found message and a reference to this address

  • T520 DisplayPort does not recognize the HD4K monitor

    T420 race that 6.7 RHEL is unable to see a P2715Q HD4K Dell monitor DisplayPort connection. I have no problem connecting to monitors 1080 p Dell P2414H to work, but not this 4K monitor at home. Further research and discussions with colleagues suggest

  • Unable to install printer driver

    I don't have a boot disk for my printer hp c3140 so I downloaded a driver from hp. I followed all the instructions and cannot get 94% - step 3/4 can I get a fatal error in the view in the view of the installation. I'm that al will not install steps b

  • Windows 7 multi-network at startup

    Hi all, have one him with another OS GREAT being whenever I start my pc, I can't connect to the net because it is showing as connected to multiple networks. I have;4 wireless modem router portsA Vista laptop that connects wireless without any problem