Export of Alienware CPU Fan

Similar Questions

• (Redirected) For the broken r2 x 51 alienware CPU fan

  Hi, does anyone know where can I get a new fan of alienware x 51 r2 processor in kl area or online? In fact, my fan still works, problem is the cover of the heat sink. The part of bolts is broken. Can I get the part of the heatsink onli or I need to buy an equipped fan?

  Best of this post in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• (Redirected) Alienware x 51 R3, the cpu fan remains constant at 9%

  Hello

  I noticed the thermal control cpu fan turns around 1.1 k rpm, even when everything warms up to 80 c. Is there a way to increase the speed of the cpu fan? Perhaps other solutions for that?

  Best of this post in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• (Redirected) Aurora R4 CPU Fan problem (command center)?

  My R4 for over a year (so the warranty is released). Just before warranty missed, fans began to everything going haywire. I contacted support and they have updated my BIOS and uninstalled/re-installed my remote control center. Which fixed most of the fans. Then I updated to windows 10, and everything was still fine. A month later, I had a system crash (wouldn't start upward) and took the PC to a local technician who found little bad ram was the only problem. Unfortunately, he drove my drivers back to before the bios and the command center have been updated (I don't know why). So, fans again started going crazy. I've updated the BIOS myself and that fixed some of the fans, however, the CPU fan is always crazy. If I run a program more complex than playing a video file, the CPU/system fan goes up to maximum speed (> 5000 RPM). In the control of the temperature, all times are stable around 27 to 28, so I don't know why the fan is too reactive. Also, I don't know why it lists the 0 system fan and the cpu fan at high speed, I've mentioned. Looking inside the machine, I can see that each fan is on, so no fan should be set to 0.

  I've heard talk of uninstall command center and reinstalling it would help, but I was not able to repeat myself that I can't find the dell control center download more. In the page drivers Aurora R4, it isn't appearing any more for download and I don't want to delete it until I have a way to download again. My command center is listed as 3.6.5.0. I have no way of knowing if this is the last version, I can't find any control center files or current information on alienware.com or dell.com anywhere. I doubt replacing the command center will solve the problem, but it is frustrating that I can't even try. Heck, even the link to the support site for "Alienware drivers and applications" leads to a dead link now (a page that won't load). If this expensive platform becomes a brick after all just a year, I don't see myself ever buy (or sell) products dell again.

  My system is an Aurora R4 with Intel (r) Core i7 - 4820 K Pro. Running on windows 10.

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.

  Hello!

  My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

  Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

  What could be?

  Please help me!

  4ntoine

  Here is my model of iMac:

  iMac 27 "mid-2011 model 12.2

  Intel Core i7 3.4 GHz

  AMD Radeon HD 6970M 1024 MB

  OS X El Capitan 10.11.6
  SMC 1.72f2

  Boot ROM IM121.0047.B23

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• Tecra A9 - after CPU fan upgrade works constantly at full power

  Hi all

  I have 3 Tecra A9 notebook that came with a Core2Duo T7100 clocked at 1.8 Ghz with 2 MB of Cache. Updated every 3 to a T7700 clocked at 2.4 Ghz with 4 MB of Cache. According to Intel, these two processors TDP is 35W. Books don't get really hot and not hot. The CPU FAN starts right full power after the display of the BIOS with the Toshiba Logo screen. Under Bios Version 2.1 on all 3 systems, having the same behavior on all 3 systems. CPU properly recognized under Windows XP, Win7, and Win10. Is it possible to get the adjusted to normal CPU fan? The system isn t is hotter than upgrading the CPU, just for some reason any BIOS has now decided the fan must operate at full power. I even traded one of the CPU Fans with that of a Tecra A10 notebook but had the same effect as with the original fan. Having no idea what I could do. I hope for your help!

  Best regards
  Bornchiller

  I think that needs calibration to be performed to configure the table of fan speed.
  Toshiba Service Center to do this.

• Where to buy for my Satellite Pro P300 CPU fan?

  Hello

  I noticed some not very good sound from my cpu fan, as well as my 17 "laptop overheating.
  I decided it was time to replace the cpu - model KSB0505HA fan

  Now I wonder where I can buy a new fan for this model?
  I found a site in New Zealand, but the fan is for the P305 series, and I'm not sure if it would be compatible with my laptop.

  Could someone advise me on where I can get a new fan of cpu for this series?

  Thank you ~.

  In order to ensure:
  I'm looking for one in my country - the New Zealand!

  Added that the search for a New Zealand

  P305 is probably model proposed in US, but it must be the same as P300 in Europe or in THE so I think it should be good.

  I put t know where you can order it, but try to use Google and check if you can find a store online in AU where you can order.

  I can also imagine that you can order by the nearest Toshiba authorized service provider. Call and ask.

• Satellite P200 - need CPU fan replacement

  I have a Satellite P200-16V and my problem is on the cpu fan.

  I tried to open it, but after the keyboard, hard drive, Rams, OVOCHECK and 40-50 screws and some cables, I realized I have to get out the motherboard and screen mabe and I close it again after 3-4 hours. The cpu fan has been breaking and I don't know what to do.

  I am from Greece. If I go to the toshiba in Greece, I can find a cpu fan or any system cpu radiator? Can you help me?

  Hey Buddy,

  Looks like the fan needs to be replaced and therefore, you should contact the closest service provider authorized in your country. Guys can order a replacement part and swap it out.

  On the Toshiba site, you can find a list of them:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Sorry, but everything that s what I can say. Here it s only a user forum so I think no one knows the exact number of part or a manual how to take apart the laptop but the ASP can do for you. :)

• Need for SP A10 CPU fans

  Can someone help me?

  I own a Satellie Pro A10 laptop and my cpu fan began to make a noise almost like grinding on something is. Ive checked the fan and it looks clean without dust and dirt block it. I was wondering if anyone can tell me is that I can find a replacement fan as it is out of warranty.

  The codes I can find are;
  Its auto fan: 38072
  On the case: MCF-TS6512M05 and GDM610000126
  DC 5v 300mA

  I would be grateful for any help in this matter.

  Thank you

  Hello

  I think that the right part of this cooling module number is P000377310.
  Check out this site. You will find a picture of this cooling module:

  http://www.sparepartswarehouse.com/Toshiba, Laptop, P000377310.aspx,

  Concerning

• Portege R700 - high CPU fan noise

  Hello

  I own the Canadian version of the Portege R700, called Tecra R700 (PT319C-00E002).
  The CPU fan always runs between 43 percent and 51 percent (regardless of the mode of selected frequency), which makes the noisy computer - too noisy to be used comfortably, too noisy to be used at meetings of air-conditioned silent.

  The fan seems to be controlled by the BIOS, as well as applications such as SpeedFan are unnecessary. Is there a way to fix this?

  Kind regards.

  Hi dernierrecours,

  > CPU fan always running between 43 percent and 51 percent (regardless of the selected frequency mode)
  This means that the fan runs always at the same level regardless cooling method that you can choose in Windows power management?

  Well, have you tried updating the BIOS? The latest version is installed?
  Check out the Toshiba page for an update.

• Satellite L670 cpu fan noise

  As I sit in front of my new laptop L670, from the left end of the keyboard comes up and down a whirring frequent sound that I'm pretty sure is the CPU fan
  (not HD).
  What is too much? I find it disturbing. There is no sound from my old Toshiba 1 year. The room temperature is a constant 20degrees, so it is not overheating.
  And does so even when sitting idle with just the screen Windows7 IE no software activity going on at all.

  I'm worried that this is a faulty computer. It is old (for me) - 2 days, purchased new. Still able to resume.

  Grateful for any thoughts.

  L

  Hello

  I put t know how I can you use your laptop, but for normal use I recommend to use the balanced power plan. Enter the advanced power settings for the management of the balanced diet and open Toshiba power saver.
  You will find options for cooling method.
  Set to optimized battery.

  This should reduce the activity of fan cooling.
  Please test.

• Tecra S11 - CPU fan is high speed

  Hello

  We have a problem with nine Tecra S11 / Windows 7 64-bit. The CPU fan is noisy high speed during ignition and start Windows. No change after logon. Speed remains unchanged up to go to the sleep mode once. After waking up, everything is OK.

  For me, it seems to be a problem with the firmware (BIOS). Update V1.70 but no change. We have same problem with the S11.

  Any ideas?

  Cordially Stevep

  Hi Stevep_1,

  Have you tested different cooling options in Windows power management? Check it for each profile, and then select battery optimized cooling.

  It work?

• My cpu fan runs very fast

  My laptop is HP 430.I bought a month ago. but now m facing a problem that my left side of laptop heat & the cpu fan turns very quickly, and issued to hot air. Although I don't run any proggram when I start my windows.i checked for Task Manager and saw that my ram is support 1.44 - 1, 62 moy. now what can I do now?

  Theedude Hello.  I understand that your laptop runs very hot.
  
  
  
  First, follow the steps in this document to ensure that the cooling area is free from dust and debris.
  
  
  
  I suggest also that update you your BIOS.  Here is a link to the latest BIOS.
  
  
  
  Let me know the result.  Have a wonderful day.

• Satellite A500-040 - too noisy CPU fan

  My CPU fan runs too fast and too loud. The fan speed is still 73 percent. Although I have not used all the programs, the CPU fan speed is always 73%. Never speed is made once it has reached 73%. Even the CPU temperature is about 35%.
  I tried to do as a result of the actions:
  It solves not 1 updating bios/drivers-
  2 changing settings of the power plan does not solve
  3 cleaning cooling module does not solve

  Can someone help me?

  Unfortunately there is not much you can do about it. Cooling fan is controlled automatically. I put t know which options have the power that you have changed, but please try to change the option for cooling method. You can find it in the advanced power options > Toshiba power Saver saver > cooling method.
  Use the optimized battery option. This should reduce the activity of fan cooling.

• Satellite A300 - 1-3 - question on CPU Fan

  I have a Toshiba Satellite A300 - 1 3, recently I had problems with my laptop in which the laptop suddenly stops working, when I checked the forum, I was advised to clean the cooling system, which I did and all is now ok; recently, I noticed that CPU fan stops momentarily, then back to work, is this correct?

  If this is not the case, what should I do, should I replace the CPU fan? Or what?

  As far as I know CPU fun is running automatically and it will run when this is necessary so that the fan behavior is nothing unusual.

  If your laptop works well and, after cleaning, you didn t notice any more close I think that everything is OK.