Alienware 17 - R2, drops battery play mode?

Similar Questions

• Satellite A660 - fan 90% on battery optimized mode

  Hi all my dear users of Toshiba that I really respect because they use such great brand Toshiba. I hope you have the time to read my problem and that its length can not bother you and you can do me favor and answer me.
  I am from Egypt and I recently bought the Toshiba Satellite A660 - 17M. It is really a great device and I've updated the BIOS twice on the official website of Toshiba and now I have the 2.00 BIOS os independent.

  My problem now is that the fan cooling and here's what happens with me. When I adjust method in the Toshiba cooling ensures peak performance so that the temp is between 36 to 63% and the fan speed is 52 to 75% and it takes a lot of time turns off because it is not easy to reach the beach of temp which makes it either stops when I'm inactive or work.

  The largest part of the problem is that when I change the method of cooling battery optimized mode everything working the fan going to 90% and rest, so never or up to this I put the laptop before in the refrigerator for 2 to 3 minutes. Then it is cool and it stops. So in the meantime either inactive or work done, it jumps again to 90%. When I turned off my laptop and wait to be completely cooled, then turn it on while in battery optimized mode the fan starts working during start-up only stops until Windows starts completely then it climbs to 90% and remaining so ever except when I force him to be cool by placing it in front of the fridge.

  My friends, I think that it is not logical to always work in conditions of refrigerator and also it is illogical to have fan always 90% especially that I'm on battery optimized mode.

  What is the problem in your opinion, and if someone has the same laptop can help and describe what is happening with him also. I do not remember if these events are produced before BIOS set to day or not as I they weren't in my mind before BIOS update and I don t know whether or not this happens also before the BIOS update.

  From what I understand, is that the battery optimized mode fan running weaker than the maximum performance mode. Then what's happening and if you say he remains silent until this than complete Windows starts and runs then 90% to compensate for the accumulated heat, I agree with you, but shouldn't t happen to some extend then stops at the battery life optimized according to the name of the battery optimized mode.

  Really I am so disappointed and now know what the problem is. Please help and don t advise me to call Toshiba. Whatever they say please send us the laptop. I m waiting for your responses and thanks a lot for the time spent reading my message.

  Hey,.

  Normally if you use the battery mode optimized for the method of cooling the fan will run less maximum performance. So your laptop will work more silent, but with a higher temperature but usually you don't notice it.

  So if this happened only since the update of the BIOS is you load the default settings in the BIOS after update? Go to the BIOS Setup and press F9 to load the default values. Then save & exit the BIOS Setup.

  I would be also interesting to know what operating system you are using. What is the version preinstalled Windows from Toshiba or your own installation?

  The fan should be cleaned from time to time using a jet of compressed air to blow the dust from the cooling fans. This can also help improve the cooling. An accurate and interesting article on cleaning the notebook, you can find here:
  [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

• T440p windows 10 battery charge mode

  Hi all

  I had a recently updated T440p to level to win10pro win7pro. Among other things, the most annoying is the battery charge mode: I put it in "custom load thresholdd", between 55% and 85%. Instead, each time you start the battery starts to load and I have to go to PowerManager8 and change the setting to custom. Then everything is going ok until the next start-up, where I have to do the same thing...

  The notification on my antivirus is the second most annoying: I forticlient antivirus (the latest version, updated to work with win10 ok) running without problem, but in each boot win10 informs me that forticlient is disabled and keeps telling me the same every now and then... I've already put the Panel I want info on the antivirus, but win10 seems that does not understand this...

  Any help will be welcomed.

  Thank you, guys!

  Hi x220forme and thanks for the welcome!

  I found a 'strange' way of trying to solve my problem: I have read in this forum about someone else whom the battery was not charged as it should, and the notice was "try to degrade your power managememnt driver and power manager.

  So I thought ' why not? ' and the last 36 hours, I installed Power Management Driver 1.67.03 and Power Manager 6.67 (with windows 10 Pro in a T440p).

  Until now, looks like it works well. After many restarts, my battery is at 85% and fails to demand, as he has done with PM8. I'll wait a few more days and let the community know, in case where someone else facing the same problem.

  Thanks again!

• Stuck at 50% after battery saver mode have changed for Linux.

  Hello

  When I had installed on my X 1/2 G W7P, I turned on the battery saver mode.

  Later, I decided to change the Linux operating system and has not changed this back to normal

  operating on battery and Linux (Debian) seems only to charge the battery at 50%.

  First of all, it is in fact a matter of strives Windows and second, is there a command

  or option in the BIOS that resets the battery to full charge mode?

  TIA.

  Additional...

  TLP do not work on systems with sandtbridge or newer.

  Which, I believe, includes the 1/2 G X. However, another

  Manager power exists that can work.

• Problem in battery saver mode.

  Whenever I am trying to switch to battery saver mode in settings > battery, it will power off automatically.
  Could someone suggest a solution for it... Please ?

  Make sure that you have not disabled to help.

  See you soon,.

  Nicole

• The Windows media player 12 now playing mode. AutoHide controls no longer works. I toggle the AutoHide option and it has no effect.

  Tab Player Windows Media Player 12 options, there is a toggle called Allow hide automatically playback controls. Looks like he could have run the first two days I was with her, but no more. Is it possible to get it working again. It applies to the playing mode.

  Thank you, Orson-

  Hello

  Please use the Forums of Microsoft Windows 7.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  1. open Windows media player.

  2. in the "Library" view, click on the button "Organize", select 'Options '.

  3. the many tabs 'Options' dialog box is displayed. Click on the tab 'Player'

  4. under "Player settings", check 'Allow auto hide of playback controls' as you wish.

  5. click 'OK' to save your settings.

  Method 2:

  Uninstalling and reinstalling Windows Media Player:

  1. click on start and in the search type "Turn Windows has or not.

  2. click on "Turn Windows features on or off".

  3. search for multimedia and uncheck the brand in the face of Windows Media Player.

  4 restart the computer

  5. click on start and in the search type "Turn Windows has or not.

  6. click on "Turn Windows features on or off".

  7. go to Media features and place a check mark in front of the Windows Media Player.

  8 restart the computer.

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• How can I turn off battery saving mode? If that's what it is...

  The other day, my computer laptop has become a kind of battery saving mode after I restarted, where I couldn't customize my background and toolbar, and my internet passwords and things disappeared. I can't fix it, and my computer is plugged... It has a taskbar of bright blue and I can't boot up normally with my saved settings. Thank you.

  Hello

  1. What is the brand and model of the laptop?

  2. where have you changed the settings from?

  Method 1: Run the troubleshooter

  See the following site:

  http://windows.microsoft.com/en-IN/windows7/Open-the-Power-troubleshooter.

  Method 2: Restore the default settings in power options

  (a) click Start, Control Panel, system, and security and then Power Options

  (b) according to the plan that you want to change, click on change plan settings

  (c) select restore default settings for this plan.

  I also suggest you please contact the manufacturer of the laptop computer for more help on the issue.

• BlackBerry Z30 battery saving mode uses "location services", although not active

  Hi all

  Although exclude/disable battery saving mode settings location service monitor says the opposite. Each time that the savings mode "location services" use about 30% of all resources during these times.

  Bug or "feature"? ".

  Thank you
  Sandro

  Hmm, you can try to reset

  Turn off battery saving mode--> press and hold down the power button until the red LED is displayed, the device restarts and appearance of the logo blackberry and telephone lights--> ride on battery saving mode (with off location services), and then monitor the battery consumption again.

  Can bring back you after that?

  P.S.: Do not try the restart process if you are on a low battery due to some black screen issues that some users have on this forum.

• BlackBerry Smartphones BlackBerry Curve 9220 OS 7.1.0.337 - missing device blackberry and battery saving mode Analyzer.

  Guys, after the failure. I lost my DA and the battery saving mode. I did the ALT + BBDA, it did not work. I am trying get off my OS and see what happens. Hope you know any possible solution.

  upgrade to an operating system of 7.1.0400 or more

• DUO 13: Buzz and high battery loss mode "sleep"

  I notice a rather strange problem and concern with my DUO 13, when I put it on sleep, I hear a very low hum coming from the center of the laptop computer, after a few hours this part Gets a little warmer and I get a significant (5-6% per hour) battery loss. Everyone has noticed this problem?

  I tried to put the phone in airplane mode bofore enter in sleep (just to check if the feature "connected internet ' could be the reason), but I had the same noise behavior.

  While the laptop is working I can't heard this noise, also if I put into Hibernate the laptop, this does not happen. Can adefective unit or it's normal behavior?

  Cugel,

  Battery loss of 5 to 6% per hour is a lot. I think that this is supposed to be 10% per hour the screen on while playing a movie. Can clarify you what you are doing when in mode 'sleep'?

  Also a laptop computer in mode 'sleep' shouldn't be heat sensitive.

  The hum that you describe sounds as it can come from inductors in the diet. It is usual for them to make some noise, but it is usually by ultrasound. At low enough power output maybe he can't spend fast enough without having really low efficiency, where the audible hum.

  It could also be the audio circuit / speakers picking up some sort of interference if it sounds like it is coming from the speakers. How loud is it anyway? Can hear without putting your ear to the unit?

• HP 15ab032tx: videos stutter on Hp battery recommended mode

  Hello.
  I am facing problems with video playback on the battery of my laptop. Videos stuttering and pixelate when running on the battery of the laptop. These videos will work perfectly when I plug the power cord on my laptop. When I manually change the power settings to high performance (on battery), the videos play fine. There is clearly a problem with Hp recommended energy saving mode. It started have occurred recently.  Any help is appreciated. I hate manually switch between the modes of the battery.
  Thank you

  Hi @Pranav93,

  Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand you are looking for assistance with problems of stuttering video of your computer when HP recommended diet plan is selected. It will be a pleasure to help you.

  A remarkable work to properly diagnose the problem before posting your question in the forums of HP. It's always a great pleasure to work with the tech-savvy as you. Kudos to you for this. You're an HP customer, and we greatly appreciate you for doing business with HP. Thank you for giving us the privilege to help you on this platform.

  If it is a recent phenomenon, please try a system restore to an earlier time before the problem started. Link for the restoration of the system: http://support.hp.com/in-en/document/c03327545 and select the option "restore your computer when Windows starts normally.

  If this does not resolve the problem, reset the default power plan and for further assistance please visit this link: http://support.hp.com/us-en/document/c03397760 and select plan recommended HP of power and control.

  If this does not uninstall drivers ACPI from Device Manager and check after restart the computer by selecting the plan recommended HP of power.

  Please update the bios and drivers from the chipset of this link: http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-15-Notebook-PC-series/7771366/model/7919380

  I hope this helps. I would like to know how this happens. I really hope that the problem is solved without hassle and the unit works very well. Please reach out for questions and I'll be there for you help.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• Satellite A300 - consumes a lot of battery in mode 'sleep'

  Hello
  I have a Satellite A300-1MP, brand new, with Vista 32.

  When I put it in mode 'sleep', she devours battery. Something like 10-20% of the overnight!
  Why is this happening? Is this normal? If not, how to fix? Is there something I can do or is there a problem with the laptop battery?

  My old laptop is a Satellite M70-340, and standby mode, it would lose less than 5% per day!

  I'd appreciate your help!
  Thank you!

  Hello

  You may need to disable certain options in the BIOS.
  I'm talking about Wake up LAN and similar options.

  I found this article from Toshiba:

  + Battery draining 15-20% when it is turned off during the night.
  http://APS2.toshiba-tro.de/KB0/TSB6B01N50013R01.htm

  Disabling Wake up option should help.

  Good bye

• Activate the battery Conservation Mode in Windows 10

  Lenovo ThinkPad E540 laptop running Windows 10

  When I got this machine, he was running Windows 7. With the help of Lenovo Power Manager, I was able to put the battery to load only when it fell below 40% and charge to a maximum of 80%. This configuration is designed to extend the useful life of the battery. My laptop is plugged in most of the time. I only use the battery for short periods.

  When I put the battery always charged as he did in Windows 7 (from 40 to 80%), but I could not find a setting to fix this to upgrade to Windows 10. At some point, I installed a critical update of Lenovo. I think it was an update of the firmware. Since then, the charges of the battery to 100% every time I plug the. I want to charge the battery the way I used to. I saw this parameter called Mode of Conservation in online discussions.

  This message indicates that it is possible to access the Conservation Mode in 10 Windows through the application of Lenovo settings:

  http://www.improdia.com/tech-tips/Lenovo-battery-conservation-Windows-10/

  I followed the instructions in the post above, but my Lenovo settings app does not have a power for the Conservation Mode setting. I have the status of power, always on USB, rest of battery meter, but no Conservation Mode.

  Does anyone know how to access the Conservation Mode in Windows 10? Or does anyone know how to get the same functionality via another way? Thanks in advance for your help.

  As far as I know, this is not possible in Windows 10. This feature has been removed. I'm sorry.

• HP Pavilion Notebook - 17-f215: changes in brightness on its own to screen when I am on battery saving mode.

  The screen changes alone, I noticed when I'm in power saving mode.

  Hello

  Here are a few things to check.

  1 right-click the battery in the taskbar icon, and select Power Options.  Click on change settings for the plan alongside your selected power plan, and in the next window, click on change advanced power settings.  In the advanced settings window, expand display, and then expand Enable Adaptive brightness - make sure it is set to Off for on battery and sector.  Click apply then Ok to save the configuration changes.

  2. open windows control panel and on the top right, next to the display by: select "large icons".  In the new page layout, select Intel HD Graphics.  Click the power and in the next screen, select on battery in the left pane - under the Display Power Saving Technology option, put on Disable.  Click on apply and then OK to save any setting changes.

  Kind regards

  DP - K

• Disable the "Now playing" mode in WMP12

  Hello.
  I'm not like this new mode of "Now playing" feature. It would be nice if I could just forget about it and never use it, always being in a normal mode, but when I open a multimedia file the default mode is "Now playing". Can I change somehow?
  In advance, thank you Alex.

  Hi pokrishka,
   
  Can be used for playback in full-screen mode or mode of the Player library.

  Full screen makes videos, DVDS and photos fill the entire screen when you play them.
  1 display a picture or play a video, TV show, DVD, or song.
  2. click on the button full screen display in the lower-right corner of the player, or press Alt + Enter.

  For more information visit http://windows.microsoft.com/en-US/windows7/Switch-between-display-modes-in-Windows-Media-Player
   
  Getting started with Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/getting-started-with-Windows-Media-Player
   
  Change the appearance of Windows Media Player by using skins
  http://Windows.Microsoft.com/en-us/Windows7/change-how-Windows-Media-Player-looks-using-skins
   
  Hope this information is useful.
   
  Umesh P - Microsoft Support