Alienware Area 51 Microphone input

Similar Questions

• Never used front microphone input, correct Recorder window, no audio output.

  Sound input tape recorder going nowhere, an acoustic window is supposed to open, it does not work.

  There is a software that is missing in my computer portable pavilion g7.  Its media player is fine, its internet

  is fine, don't you miss that sound comes from the microphone input.  The sound recorder window is open and the

  record bar is moving because the entry varies, how do I get the sound to the speakers.  Never used this

  the option before, it might be defective from the factory.

  Problem solved.  You can not turn on computer with the microphone or other audio cable.

  If the computer does not meet the entries, you must connect the microphone or audio

  cable after connection and then a window will open allowing you to select the default entry.

• Equium L20-197: what is the maximum impedance for microphone input

  Can someone tell me what the maximum impedance is for the microphone to an Equium L20-197 standard input

  I'm doing some recording on my laptop through the microphone input. I would like to know the maximum impedance entry is for Conexant AC-Link Audio version 6.14.10.590.
  I do records and try different input methods, but I'm afraid to blow the whole sound card and the motherboard.

  I looked everywhere and I can't find out. If someone could help me please let me know.

  Unfortunately, I also goggled and checked some sources of information but nothing
  Did you ask to the authorized service provider in your country for advice or details?
  Technicians usually have access to maintenance manuals that might provide details
  Should more known as users just like you and me...

• Problem updating display on Alienware Area-51 m15X Vista drivers

  Hello. Recently, I had a virus on my Alienware Area-51 m15X. It finally did my restore my computer to its factory site. Most of the drivers was missing. I reinstalled my wireless card driver and the graphics driver, but the graphics driver does not work correctly. I uninstalled and went on the Web from NVIDIA site to reinstall the appropriate driver, and it still doesn't work right. I used Driver Sweeper to clean all the files on my HARD drive that are associated with the NVIDIA device in safe mode. I reinstalled all the and restarted my computer and I still get the error message. I can't send it because it is not under the manufacturer's warranty, and I have little money to send it to Best Buy Geek Squad. Please, if there is a way to solve this problem, even though it requires the formatting of my HARD drive, I'll be ready to do so.

  I solved the problem. For future use, if you own an Alienware or use the NVIDIA 8600 M GT card, uninstall the driver using Device Manager and use the driver Sweeper to remove all traces of the driver. Once this done, do not restart, but go on the alienware website and download the NVIDIA driver (you must know your operating system, ect. ect. for the driver) and install it. Windows will say that his signature is unreadable. Click on install anyway. reboot and your laptop must be as new :D

• Alienware Area 51 (ALX)

  Hello

  I have an Alienware Area 51. I think that's not the ALX, but I'm not sure. I have a few questions:

  1. the Dell website does not recognize my service tag when I he returned in product support, my tag is the NOTE from the ADMIN: maintain the label removed according to the rules of confidentiality > (generated by the system Dell detects)

  2. I think that my collar closed not automatic, but how can I be sure? I see that somewhere?

  3. the active ventilation does not work correctly. 2 fins are not going up, they get stuck after one or 2 centimeters. They go down in the normal way. How can I fix?

  Thanks in advance

  Remove the two side panel access doors. Remove your signs of topping top skinny black acrylic finish on both sides of the case so you can access to the fins, their hinges and screws. When you turn on, look to see what makes your 2 flippers paste. If you need to, "help" take off. Command center can open, active evacuation, have CC open the fins and close once or twice. Do test for bonding. Usually, it comes down to the torque of the screw end, or the torque of the screws of the trim panel. Unless of course you can see what is the cause of bind, as an obstacle.

  You can try back a little torque on the screws of the fin on the 2 fins that stick. Reinstall the screws to the appropriate if - couple when they return to normal. Retest w/Command Center, open/closed. If everything is fine, reinsert the finishing trim panels and reinstall the screws, but not too tight just yet. Repeat the test with the command center to open the closed fins. Usually, the screws from trim to finishing nearest you for what purpose clings is the culprit, then tighten or loosen based on the question whether one of these tips have helped. As long as the finishing pad screw is almost tight, it will keep the filling and not make the stick of fin...

  Basically, remove your doors case, remove the upper trim, power and go from there...

• Alienware area 51 25 fps...

  Hello

  Sorry for my bad English, I'm French,

  I have Ben Ali recently an Alienware Area 51 with 32 GB of Ram and 2 graphic cards Nvidia Gtx 960, I activated the SLI.

  I have a few games 400fps as League of legends/rocket League etc. in Ultra quality.

  But in other games like Rainbow Six seat or the forest, I need to be in the moderate to get 20-30 FPS... I have a monitor dell of 3840 x 2160...

  Can someone explain/help me why so I have less FPS?

  Thank you very much for your help,

  Antoine Bedaton

  The fps you get seems quite normal for this resolution with these cards as it turns be 4K resolution. Try to run games in 1920 X 1080?

• Profile of Alienware Area - 51 ALX Intel XMP A10 does not work with DDR3 1600 MHz

  I bought three Kingston 8 GB RAM DDR3 1600 MHz 240 pin DIMM that totals up to 24 GB of RAM and install in my desktop computer. When I turned on and the message appeared saying:

  Maternal health and infant is running with DDR3 - 1333 MHz

  WARNING! Previous overclocking failed, and system restore its default value. Press F1 to continue, F2 to enter Setup Menu

  When I access the BIOS setting (version A10), I disabled XMP and then it went through fine after the reboot. However, I have to have XMP allow at any time? How can configure profile 1333 MHz to 1600 MHz XMP?

  What bothers me is that I had three former PIN of Kingston 4 GB RAM DDR3 1600 MHz 240 DIMM which total up to 12 GB of RAM and the XMP worked very well with them before they were 1600 MHz.

  The type of computer I have is:

  Alienware Area-51 ALX

  Intel Core i7 980 Extreme 6 c with 12 MB of Cache

  Windows 7 Ultimate

  Please, help me to solve this problem. Thank you.

  See this:

  http://en.community.Dell.com/Owners-Club/Alienware/f/3746/p/19471694/20209913.aspx#20209913

  And I certainly don't have the answer, but I'll remember these points:

  1. I think that you can set manually nothing XMP adjustable (but with more control).

  2 machines often memory need to be slowed down when you are near maximum capacity look maintenance manuals.

  3 area-51 has never been tested or even allow the 8 GB DIMMs. You are in the new territories.

  4. If you really need 24 GB (and it works at 1333) then the 267 speed drop is insignificant.

• (Redirected) ALIENWARE AREA 51 AND GTX 1080

  hi, do you know if in the future there will be the opportunity to buy the Alienware Area 51 already with the GTX 1080 ? ( single double or triple )
  

  Best of this post in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• (Redirected) Dell Alienware Area 51 new model

  I bought a dell alienware are 51 desktop PC I just deliver on Friday.  I would like to add another 980 Nvidia gtx card to that, but the SLI bridge comes in 3 different sizes, short, medium and long.  What I want to know is which bridge of size I need.  I can't find an image of hard drive so I don't know if pci express ports side by side or y at - it a regular PCI between them.

  http://www.GeForce.com/hardware/technology/SLI/bridges

  Best of this post in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• (Redirected) Add the second SSD to Alienware area 51 R2

  Hello, I recently bought a new Alienware Area 51 R2, currently I have a 128 GB SSD main + 2 TB storage config. I want to add an other SSD, capable of 256 GB. I want to start my games from there.

  My Question is, what would be the best solution for my needs? I see so many types of SSD out there and have little knowledge about the benefits and disadvantages of each.

  Best of this post in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• Alienware area 51 bumps on the edges of sewing?

  Hello, do all the alienware area 51 have little bumps very very small metal on the edges of the seams when there is a gap on the side where the two metal parts connect to form the handle? tied of arrows with what we talk about.

  

  Mine has no defects noted thereon. While I agree this is a minor flaw in your, you also have the right to complain and make use of your resources with Dell

• Gigabyte of R2 Alienware area 51 GTX 980 TI G1

  HELO everyone

  Ive wanted to change my GPU of a SLI GTX of 970 to a GIGABYT SLI GTX 980 TI G1. Ive been hearing rumors about area 51 R2 motherboard is not compatible, or something? Im not an expert in this so if someone could give me some advice on if it's fixed or not, I would be very grateful.

  My sheet atm are:

  Intel Core i7 - 5930K (6 hearts, 15 MB of cache, the overclocked up to 3.9 GHz w / Turbo Boost)

  Alienware Area 51 1500W chassis

  DDR4 Quad Channel 32 GB at 2133 MHz

  Hand of 256GB SSD 6 GB/s + 4 TB of storage 6kRPM SATA 6 GB/s

  Dual graphics card NVIDIA GeForce GTX 970 with total 8GB (2 x 4 GB) GDDR5 - NVIDIA SLI active

  PS ive purchased my alienware before alienware standard selling area 51 with 980 TI SLI gtx

  Hello

  I just spoke with our support tech LV3 Department and they have advised that there should not be problems with this configuration on the Alienware Area 51 R2. Let us know if you encounter any problems.

• Mother ASUS Rampage IV Black Edition in a matter of Alienware Area 51

  I use an Alienware Area 51 case temporarily install my new system. The front panel connections are compatible with the ASUS Rampage IV Black Edition motherboard? I have no idea where to connect a power button on the motherboard receive the system to turn on. Thanks for any help anyone.

  Assume that it is a case of Alienware base, trying to integrate into an Asus mthrbrd. I want to emphasize the use of a black base type USB connector 5 x 5, where the 8 wires are used, 2 slots are open.

  

  You've been making photos & links to posts that show that the Asus boards use what amounts to a pair of 5 x 5, or a solid 10 x 10, imitated by the Q-connector. Mthrbrd Q-connect & Asus will be the printed text. If your son of façade are currently inside a type usb connector 5 x 5, like the photo above, you must identify the reset/pwr sw/pwr led/hdd led son:

  • pairs of son reset & pwr sw are not polarized +/-
  • HDD led/pwr led are polarized, you must obtain the + / conduit into the correct slots

  I don't know how to tell another that, Mr President, rewire your façade according to the diagram below, using your choice connectors, 2 pins (as shown) or a pair of 5 x 5 usb-types or a solid 10 x 10

  

• (Redirected) Upgrade of RAM for my Alienware Area 51 R2

  I need to upgrade RAM in my Alienware Area 51 R2 currently having DD4-2133 Non ECC RAM, 8 GB in 2 homes, 4 GB each in Total. My question is, can I use DDR4-2133 RAM ECC, 16 GB stick in the four locations, a total of 64 GB of RAM?

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• (Redirected) Speakers with an Alienware Area 51

  I had crazy computer problems lately. A few friends put in place a computer for me and there were a lot of problems that I won't detail here, but it culminated with the motherboard is fried when I plugged in the speakers.  I finally gave up with home-built computer and ordered an Alienware Area 51 with a 1500w power supply. However, I am relics afraid to connect the speakers for fear of frying another card mother, though everyone tells me that what has happened is a stroke of luck and the other motherboard was faulty.  Right now I use a computer + 7 years, I had in the closet and the speakers work fine with it, and they also worked in my old computer, which was also an Alienware. My question is, is it possible that the speakers might be 'too powerful' or 'too high a power' to work on the computer that is on the right track? The speakers say they are 120-240 v, but I don't know how powerful they are. My future computer has a 1500w PSU and two GTX 970 graphics cards, but it seems that there should be a lot of power for speakers. Am I paranoid? Has anyone had the motherboard is fried by plugging in speakers?

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.