All experience with Mac leopard or Tiger on Equium A210-17I

Similar Questions

• Equium A210-17i does not supply power to the top only with the power adapter plugged

  Equium A210-17i turn on when the battery is missing, but the laptop is set to the power supply dc?

  I have a dead battery and the laptop does not light with or without the battery inserted.
  The food came out 19v as it is supposed to.

  Also no led lights on the laptop when the power is connected and there is no sign of life at all by pressing power buttun.

  Thanks for any response.

  Hello

  The laptop must also lights up if the battery is not inserted.
  If the adapter is ok and if it s connected to the laptop, then the power led should be lit and it should light up.
  This led indicates that AC adapter provides power to the laptop properly.

  But if the LED turns OFF then that would mean that there is no power, and in this case the laptop will not turn on.

• Last Firefox update compatible with Mac OS x Tiger 10.4.11

  Firefox warns me that I do not run the latest version (I have 3.6.24 GTB7.1) and download the version that is compatible with my old system (Mac Tiger 10.4.11). I click on this link and can't find anything that indicates what systems the version (s) they are compatible with. I have in the past, downloaded and installed an incompatible version, a situation to be avoided for obvious reasons.

  Bob Hunt

  You have the latest version of Firefox for Mac PPC and 10.4.11, Firefox 4 versions + Intel need and 10.5.8 or later version.

  For older Macs that don't are not supported in Firefox 4 to 8, try TenFourFox for PowerPC running Mac 10.4.11 and 10.5.8.
  
  http://www.floodgap.com/software/tenfourfox/

  http://tenfourfox.blogspot.com/

• C6280 All in with Mac OS x can not copy or scan

  I can't copy or scan. on my 6280 C all in one.  I use Mac OS x 10.7. It worked, but now all I get is a sheet with all the gray-black ink which resembles what happens if you leave the cover upward. This seems printed on or in the preview copy and scan on the copying and scanning previews - scans show a test of color along the edge.  I can print from my computer.

  I tried most of these steps.  Because it would not copy or scan it look like lamp or sensor was out. So I got a new all-in-one HP at Costco.  To still get advice ho to replace light would cost $25 at HP as it was not under warranty, as well as any necessary parts.  New one is $99.

  Thank you very much! PROBLEM SOLVED.  It's really cool to have this forum available! BRAVO!

• HP All in One Photosmart C7280 scan issue with Snow Leopard

  Hello

  I bought my wife a new cool Mac mini. So it comes with Snow Leopard. We use it for our activities with an HP printer all in one Photosmart C7280. Unfortunately the scanner does not work. I did the mistack to install HP driver from the HP website and read after documentation of the HP Web site (probably like all users). So I decided to completely re-installed the machine (as it was new) and follow the installation procedure for HP who, to say that the pilot is coming up with Snow Leopard. After the new re - install, so I installed 10.6.1 patches and last HP driver from the site Web Apple as mentioned in the forum. (version 2.2)

  The printer is correctly detected, but there is no way mak it work the scanner on HP procedures. The scanner is not recognized at all, and the printer configuration window is not appearing the scanning tab as it is supposed to. It seems that the scan part it does not work in one.

  We love HP printer and it will be great to see it fixed.

  My network configuration is very simple:

  -192.168.0.176 is the IP address of the HP printer with 255.255.255.0 netmask

  -192.168.0.106 is the MacMini (3.1) IP address mask subnet even

  All connected using a router D-Link (5 ports).

  Printer/scan function works perfectly on our other Mac systems that are under Leopard. I tried to install Leopard on the new mac mini, but the installation DVD that we have (10.5.4) does not start successfully on the machine. We are so stuck.

  Any help really appreciated

  Jean-Marie

  Hello

  Good news, it worked. But I think that the problem came from the D-Link router that I used. Upnp has been set to allow, and it seems he mistook the discovery of the device. I proceed to turn off and the live showed you me overdrawn the printer on the network. I installed it, and the scanner has been recognized.

  If I turned my back to Activate Upnp, the scan function is dead. Thus, it probably is a problem of compatibility between the leopard to snow and this Protocol. What is strange, is that our whole system of leopard work with upnp enable or disable.

  Anyway thanks a lot for your help!

• Cannot synchronize my mac with snow leopard 10.6 with my itunes on iphone

  I use MacBook with Snow Leopard, version 10.6 and sync to my iphone with itunes 6.

  For these last months, the computer commented that the itunes on the iphone was not updated and cannot sync.

  But the itunes on the iphone is the latest version. Is the obsolete software in my MacBook? What should I do?

  Operating system of your computer is obsolete. A device running iOS 9 requires Mac OS X 10.8.5 or newer for synchronization; a MacBook must have an identifier of model at least MacBook5, 1 to run a compatible operating system.

  (143247)

• Since the installation of Mac Mavericks all my friends with Macs and I have problems with the cursor disappears, that in Firefox, Safari is very good...

  I stopped using Firefox as nothing I've done has corrected this problem. I tried to close Firefox and restart it, I erased all my Add-ons and then added adblock back (it's the only one), but it still does not work. I deleted files so that I have more space - I can't think of anything that works. I talked to four of my friends with Macs and they are all having the same problem with Firefox since the Mavericks.

  Cursor disappears huh? It's quite strange. All of the compatibility of the Mavericks can be followed in [Bug 883824]

  Try this work around:

  1. Go to Firefox > Preferences > advanced > general
  2. Always check "use the cursor keys to navigate through the pages.
  3. Press OK.

  Or try the Mac preferences noted here: https://discussions.apple.com/message/23542890#24471966

• New iPhone IS does not work with MAC Mini 10.6.8. Apple support says upgrade your iTunes. Its the wrong color icon. WHAT? iTunes is the last 11.4 for my mac. All my music is on my Mac. Help!

  New iPhone IS does not work with MAC Mini 10.6.8. Apple support says upgrade your iTunes. Its the wrong color icon. WHAT? iTunes is the last 11.4 for my mac. All my music is on my Mac. Help!

  That is right. The requires iTunes 12.3.3 and in order to get it, you will need to update OS X to El Capitan. That's how Apple has created for better or worse, I'm sorry.

• Palm hotsync E2 with Mac Snow Leopard

  Anyone know how I can hot-sync a Palm Tungsten E2 Version 4.1.4 with Mac OS X 10.6.3 Snow Leopard please?  Thank you very much.  Wendy

  The Missing Sync picks up where Apple dropped HotSync support in Snow Leopard.

  http://www.markspace.com/products/Palm/Palm-sync-software.html

• Can someone please tell me what version of Photoshop Elements will easily download and run with mac Snow Leopard 10.5.8?

  I posted a question which was: can someone please tell me what version of Photoshop Elements works with Mac Snow Leopard 10.6.8.  Then this window pops up saying mark this discussion with a question and this window.  I have no idea how it works. It is already a question and if I need to point out that how this window it looks like a word of edition window, help me to do this? Download, installation, setting up

  You asked the question in the title area instead of the area where the body of your posting is intended to be.  No fault of your own - they need to make more clear form.

  Check the system requirements for the different versions of Photoshop Elements and see who fits your system.  Adobe sells only the latest versions of their software, so if you need an earlier version, you will need to find a seller for her.

  System requirements | Adobe Photoshop Elements

• Photosmart c309a all in a pr: driver for Photosmart c309a with Mac OS 10.10 (Yosemite)

  I plan on upgrading to Yosemite, Mac OS 10.10, but do not know if my Mavericks driver will work or if I need to download a new one.

  If I need to download, can someone tell me where to find it? I'm completely lost in the drivers section. So many links and so confused.

  Thank you

  Michele

  For someone else with the same question, I found the Photosmart c309a on this list of printers that are compatible with Mac OS 10.10 (Yosemite). http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c04473034&DocLang=en&docLocale=en_US&JumpID=reg_r1002_usen_c-001_title_r0001

  It took forever to find the right search expression to access this article.

  HP it guys, this site is very difficult to navigate. I couldn't yet find my own question in the forum until someone posted a response. And then, the layout of the answer was so cluttered, I wasn't sure what part could be an answer from him or just more links leading to pages across the site.

  Please simplify things. Thank you.

• HP Deskjet 3055 has all-in-one installation with mac

  just bought the perfect printer for my HP Deskjet 3055 A scanner/printer/photocpier needs and I precisely wanted to that it is wireless. to see that it won't install with MAC OS X 10.7.5... When I insert the instalation disc the message is "operating system is" the installer is not compatible with the version of the operating system on your computer. It is only compatible with 10.6 and below.

  is it possible for me to get this to work without having to plug?

  Hello

  Constitutes plug in the USB cable, it is necessary to configure the wireless connection.

  Then, download and install the software for your operating system below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-107372-1&CC=UK&DLC=en&LC=en&OS=219&product=5224271&sw_lang=

  During the install you will be guided to configure the wireless connection, once the client software installation compelte it will inspire you to unplug the USB cable.

  Kind regards

  Shlomi

• Someone had experience with MS Office 2016 and El Capitan?

  I was wondering if anyone has used Microsoft Office 2016 for Mac with OS 10.11.5 for awhile, especially Word?

  I just finished setting up a new of the retina end 2015 13 "Macbook Pro.  I used Office 2004 and 2008 on my old Macbook (early 2006, OS 10.6.8).)  I'm a writer, so I use especially Word and Entourage for email. (I kept 2004 because I had a lot of trouble with the Word 2008 .docx files in Snow Leopard and 2004 .doc files compatibility seem to crash less often, although the MS told me that 2004 theoretically will not work with Snow Leopard).

  Have been planning to shell out for 2016 Office for Mac, I am dreading out of it because I know from experience that things are never perfectly with any part of the office and there is always a learning curve.  So today I discovered that the resolution of a problem with Apple Care that Word 2008, who immigrated in my new computer with all the rest, can always open old Word files.  So even though I'm assuming that I couldn't go back to work until I installed Office 2016, it seems I can, which is good because I have a date limit.

  However, I am uncomfortable to work in Word 2008.  I need to decide whether to risk losing data (I have no reason to believe that Word suddenly remembered how to do automatic recovery or figure out how not to crash OS 10.11.5; probably the contrary) or install Office 2016 and spend a week learning to work in it. Questions:

  1. those who have Office 2008 for Mac tried using Word 2008 for Mac OS 10.11.5? It crash a lot?  Forget all about Auto Recovery etc. ? Or has it been pretty smooth sailing?

  2 anyone used Word in OS 10.11.5 a few months, and how it you please?  I know that 2016 Office for Mac had a lot of glitches when it first came out in 2015 for use in El Capitan, although I read that those who have been fixed.  If you use Word a lot, do you think that it works as it is supposed to?

  3 how easy or problematic has find you the transition from Word 2008 for Mac-2016 of the word?

  Thank you very much in advance for any advice about all this - much appreciated!

  I use Office for Mac 2016 and have found no problem - but I'm not a heavy user and did not use from 2008. My main reason for the assignment is to say that you can also get feedback from the Community for Office for Mac forum: http://answers.microsoft.com/en-us/mac

• DeskJet 3000 j310a does not work with Snow Leopard

  I have a printer wireless 3000 j310a dj. Until recently he worked well with Win XP, Win 7, and Mac Leopard computers. After that I updated the Mac OS to Snow Leopard, I can't print wirelessly from Mac. I used the re HP Installer - install the most recent driver. I tried to manually configure the printer with a static IP address. I deleted all printers in Mac system preferences, deleted all of the print queues and installed everything from scratch. Nothing works. When I try to print the printer Mac responds after a longer while the IP address of the printer is busy. Still I can log tool set up printer by typing the printer's current IP address and print a test page for that (even if printing is very slow).

  I'm out of ideas. Can anyone help?

  What router are you using? You've restarted it by pulling its plug momentarily?

• HP Photosmart Premium c309a doesn't fully work with Snow leopard 10.6.1

  I don't see any answers in the Forum on my printer model, so here goes-

  The printer is configured for a wireless connection.

  Cannot get IPhoto to print on a photo plate, no matter how I play with the settings in the Menu print.  However, using the keypad of the printer, I can print from the photo tray color photos using a flash drive.

  IPhoto and other apps, IWork 09 and ILife 09 will print to main paper tray, but not in color.

  Using the keypad of the printer, I can copy and print from the glass in BW and color.

  Cannot use Scan function Scanpro HP or the Device Manager, but can scan and print photo tray and main tray (but no computer or a drive - error message says no link found.

  All reports - network wireless, Network Configuration, Fax, printer status, test and HP homepage, say all right.

  I used suggestions from HP website without result, and the very nice fellow HP Chat Line, Manuel, told me in English that I have to contact MicroSoft for help.   I found a Web page apparently new to Mac users (HP printing from a Macintosh 10.5) and HP Mac-connect, but they do not seem to be updated for Snow Leopard.

  I have reinstalled Snow Leopard, nothing helps.  I also tried the suggestion of Forum to use the option installs on my Snow Leopard disc, but when I go through the steps and software options are listed, the printer list shows zero KB and the 'Continue' button is grayed out.  No help there.

  I also used most often suggestions - unplug the printer, restart the computer, etc, nothing works.

  HP is still working for the full feature software and driver for C309a compatible with Mac OS 10.6 (Snow Leopard). You can check on the HP Web site for updates. What you have there is just the base driver which is preinstalled on your pc.