My new installation of Windows 7 freezes randomly,

Similar Questions

• upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP

  I plan to upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP

  my PC configuration is like below:

  Card mother Intel DH61WW
  Processor Core I3 2100 3.1 Ghz
  4 GB OF DDR3 RAM
  Seagate 1 TB SATA HARD drive
  OS: Microsoft Windows XP Professional SP3

  I run Windows 7 upgrade advisor in which some results below the incompatibilities:

  Intel (r) 6 Series / C200 Series Chipset Family SMBus Controller - 1 22
  Unknown Intel we have not the compatibility information about this device.
  Intel 82579V Gigabit Network Connection
  Unknown Intel we have not the compatibility information about this device.
  Realtek High Definition Audio
  Realtek unknown we have not the compatibility information about this device.

  Here's my conceerns:

  What needs to be done to overcome the problems of incompatibility?
  Do I need to download new software files compatible for windows 7 and then install
  for example VLC media player, Skype, MySQL Server I am running
  or currently existing files are compatible to install with Windows 7?

  Would I be able to upgrade to windows 7 without any problem and safely?

  Could you please help me with the questions above?

  Please correct me with additional suggetions that I may have missed with.

  Looking forward to hear from you

  Thank you

  You understand that you will not be able to upgrade Windows XP to Windows 7?  He will have to do a clean install.

  The Council supports Windows 7, you can get the drivers here (the chipset drivers should be the first drivers you install after installing the operating system.)

  John

• New installation of Windows XP does not - UNMOUNTABLE_BOOT_VOLUME

  I'm trying to do a fresh install of Windows XP.

  Soyo SY - P41 845PE Lite MB
  Pentium 4, 2.4 GHz
  1.5 GB of Ram

  This is a computer that I use every day and who usually has a hard drive with WindowsXP SP3. I just want to have a spare hard drive with a new installation of Windows XP on it.

  But installation can not. Usually to auto restart after step 'Copy files' of the installation process. The Windows splash screen appears briefly, and then blue screen message, "a problem has been detected and Windows has shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME"followed a few Advisory paragraph which does not apply because the operating system is not yet loaded, then:" technical information: * STOP: (0x8951c900) 0xc0000185 0x00000000 0x00000000. "

  Once he got as far as the Windows Installer screen (one who tells me it will take 39 minutes down left) then a box seemed to read: "Fatal Error. An error was encountered which prevents the installation to continue. Installation failed to install the product catalogs. This is a fatal error. The Setup logs files should contain more information. "Read the Setup log file:" error: the signature for the installation of Windows XP Professional is not valid. " The error code is 80096001. An error occurred during trust verification. »

  Another time, after you press enter in the "WindowsXP installation on the selected element", I INSTANTLY got a screen which read; «An error has occurred during installation has been updated of the partition information on 152626 MB disk 0 at Id 0 on bus 0 on atapi [MBR].» Setup cannot continue. »

  Things, that I already tried that did not work:

  Using two different Windows XP Professional installation disks.

  Withdrawal and tries to install with different RAM sticks in place.

  Two IDE 40 son different cables, which work fine on this computer.

  Two different Western Digital disks hard two test without error using the WD diagnostic utility.

  My knowledge is limited, but that seems to leave only a bad card mother, right?  However, as I say, the computer works well with this old install Windows XP on it. He simply refuses to let me do a new installation on another hard drive.

  What other steps can I take to get a new installation on a hard drive with this computer?

  Thanks to each of you for your attention to my problem.

  I spent $4 on a 80 wire cable IDE (to replace the 40-wire cable I used) and I was finally able to get Windows XP installed today.

  Because I had done installations in the past with the 40 wire cable, I don't understand why it didn't work anymore. I guess the age of the cable, but I actually had multiple failures with a whole new thread 40 I had just bought. A mystery, but at least I now have a new facility and I am inclined to believe the 80 wire will make for a faster computer.

• New installation on windows 7 pro 64-bit sees not connected wired Officejet 6500 E710a-f

  Hello!

  New installation of Windows 7 Pro 64 bit on a gigahertz 3.40 AMD Phenom II X 4 965 with 8 GB of ram. Printer drivers worked on the same bench while he was running as Windows 7 Pro 32-bit.
  After only install FF, AVG, and Acrobat (almost a clean install), downloaded the software HP Officejet full feature and pilot 2012-10-22, Version: 116,98, 28.8 M - OJ6500_E710n - z_1315.exe and tried to install the Officejet 6500 E710a f.

  The printer has a manually set static IP and can be ping from the host. Clean Windows Firewall is disabled and stopped.

  The web interface using the IP address of the printer comes with all the features works on FF.
  Network status shows connected with IP address, hostname and Mac.

  However, when installing the network audit is no ethernet connection. Even manually enter his public static IP address or hostname does not solve the problem.

  Try the USB, the same question option. I see in Device Manager under other devices HPOfficejet 6500 and 6500 HPOfficejet - Fax with a blue questionmark.
  (In the same "other devices" there are 2 Officejet 6500 with a yellow exclamation point - probably from failed network installation).

  In the printers and devices window, the 6500 is displayed with the correct thumbnail, but with a yellow exclamation point icon. Law and by selecting the convenience store, Windows comes up with the message that no driver is installed and offers a solution.  The correction ends with the error that no drivers not found for the FAX. Re-apply the patch never finds the driver.

  Anyone who has met something similar (and a solution)?

  Thanks for any help!

  Jack

  After trying to do an install clean-install of 100% and once again, the driver software could not find the printer name or IP address.
  Back at each stage, I noticed that I was not using the correct driver! For some reason I D/L the pilot E710n which is for HP Officejet 6500 a Plus e-All-in-One.
  Whatever the difference, when installing the E710n for the model does not detect the printer, or via USB or Ethernet.
  After you download the right driver for the E710a - f HP Officejet 6500 a e-All-in-One Printer (OJ6500_E710a - f_1315.exe) installation perfectly finished in a few minutes and everything goes well...

  You would think, base or USB connectivity network should not be dependent on the specific differences sub-model. I was expecting that a bad driver interrogate the device after finding its IP address and display an error message with useful text.

• HP ENVY m6-n113dx Notebook PC: new installation of Windows 8 on HP Envy and with problems of drivers.

  I have a laptop HP Envy M6 and it came with Windows pre-installed on it 8.1. I always do a new installation of Windows, whenever I have buy a laptop that I hate all the bloatware and stuff which they pre-install on it.

  Unfortunately, when I did, I found that the drivers on the HP website do not work for some things, especially my wi - fi.

  In Device Manager there are three things that make their appearance as having a problem:

  Network controller:

  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01

  Unknown device:

  ACPI\VEN_HPQ & DEV_6001

  Unknown device:

  ACPI\VEN_HPQ & DEV_6007

  If anyone can provide me with some drivers work, I would be incredibly grateful. I called HP and they told me all I can do is to pay $40 for a CD delivered to me so I can reinstall the version of bloatware, and I really want to do. I want to use my real version of Windows 8 and not pay for something I don't even want.

  Thank you!

  Nevermind, I fixed it myself by reading old son of Paul_Tikkanen

  I used http://www.pcidatabase.com/index.php

  and found the diver that I needed, and now I don't have to pay $40 for the version of bloatware.  Yay!

  Thank you Paul!

• How to perform a new installation of window 8.1?

  Hello

  (If this is important), I use an Alienware X 51 R2 with the following specifications:

  Intel i5 4440U 3.3 GHz processor

  AMD R9 270 2 GB

  8 GB RAM

  1 TB HARD DRIVE

  Basically, my alienware has had many recent accidents before I made my own window installation 8.1 via the USB port. I thought it will run more fast and smoother after I have done, but here are a few problems:

  1 secure Boot product still "no error of Boot Drives Found" as soon as I turn on the computer. So I have to disable Secure Boot.

  2 application opening time is still as slow as before the clean install (i.e. Chrome)

  So, is there a procedure step by step on how to perform a new installation of window 8.1? I want this PC to match at the beginning when I first bought.

  Any help would be greatly appreciated.

  Thank you

  Tin

  You must prepare installation media is to present FAT32 the GPT partition scheme and parameters of the UEFI BIOS with secureboot. See here for more details:

  http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/download-Windows-8-1-retail-and-OEM-ISO/

  You can perform additional steps to clean your drive before installing Windows:

  http://dellwindowsreinstallationguide.com/cleaning-up-a-drive-format-vs-secure-wipe-SSD-and-HDD/

  For complete instructions, see here:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/a-clean-install-of-Windows-8-1/

  Note You may want to complete execution F12 diagnostic tests to verify the correct materials:

  http://dellwindowsreinstallationguide.com/F12-Preboot-Diagnostics/

  If you want to speed up your system to get rid of the mechanical HARD drive and replace it with an SSD for example the 250-500 GB MX200 Crucial:

  http://UK.crucial.com/GBR/en/compatible-upgrade-for/Alienware/x51-R2

• new hard drive - what is the difference in performance between the new installation of Windows 7 or a clone of old hard drive?

  I get a new hard Hard Drive (SSD).  The new disc is the same size as my existing SATA drive.  I can do either a new

  the installation of Windows 7 or a clone old hard drive?  I would prefer to clone the old hard drive and keep all my settings, etc.   It's empirical data on the performance difference between a new installation of Windows 7 or to continue with the Windows 7 which was 3 or 4 years ago.

  I know the conventional wisdom is that the new installation is faster, but, no matter who actually tested and compared the differences?  I know I'll get better performance of the SSD the SATA drive, but I don't know if it's worth the hassle to do a fresh install and redo all my programs and settings.

  Others that the performance of the SSD you should not see any differences.  If you do, you can always do a clean installation later.

• My C:\ Total size of the disk was 1 TB, I shrunk it once, may I take part in the new installation of windows without losing my files that are on my other partitions?

  My C:\ Total size of the disk was 1 TB, I shrunk it once, may I take part in the new installation of windows without losing my files that are on my other partitions?

  My current C:\ Size of the drive is 500 GB (I shrunk it once).

  Thanks for help.

  See the following topics:

  http://notebooks.com/2011/02/25/how-to-create-a-simple-partition-in-Windows-7-quick-tip/

• key Windows 8 for the new installation on windows 8.1

  Hello

  Anyway we can use key windows 8 to install windws 8.1 fees

  Thank you

  Hi Imran,

  You can't use the product key Windows 8 If you perform a new installation of Windows 8.1. The recommended method is to install Windows 8 and upgrade to Windows 8.1 by store. You can use the upgrade product key to Windows 8.1.

  For more information, see this article.

  Updated to Windows 8.1 : FAQ

  http://Windows.Microsoft.com/en-AU/Windows-8/upgrade-to-Windows-8

  Hope this information helps. Response with status so that we can help you.

• 5.0.3 new installation of Windows 7 x 64 black massive flicker!

  New MacBook Air on OS X with Intel HD 10.8.4 5000. Installed VMWare Fusion 5.0.3 and import a virtual machine since version 3.1. Install a new copy of Windows 7 x 64 as from a physical device. Here's a video (attached) of what the screen whenever the mouse passes over the top of the VMWare window, with the old and new installations of Windows. Note that it is not a problem when VMWare is not the active window, and the flicker follows the mouse vertically.

  So far, we have tried

  • Disabling 3D acceleration
  • change the mouse pointer
  • VMWare running in troubleshooting mode
  • VMWare update
  • relocation of the VMWare Tools
  • check Windows Update for a new video driver
  • VMWare running with compatibility of version 3

  Found the solution in this thread: scrapie form with merger 5.0.3 on no later than 2013 (Haswell) MacBook Air

  Must manually edit the .vmx file and add the line mks.vsync = "1" "

• After the new installation of windows installation

  Hello

  My computer has receantly had virus problems and I want to do a new installation of windows.  After I do this can I reinstall my copy of creative suite and use the code provided to or he'll tell me its already in use since technically, I did use it once already?  If Yes is it possible around it?  I really don't want to drop $800 again just to reload windows on my computer.

  Thanks for any help!

  Disable your existing installation of Creative Suite for free activation.

  Open any application e.g. Photoshop then help > Deactivate. That will disable the entire suite.

  Reinstall Windows.

  Reinstall the Creative Suite and it reactivates during installation.

• Windows hangs / freezes randomly (RESOLVED)

  Hello!
  My computer hangs / freezes randomly every day. This started happening after a Windows Update. Please don't tell me to mess with my computer because I am 100% sure that it is not the computer, it's Windows. Please help me, I can't take it anymore!

  IMPORTANT EDIT: (the above problem is SOLVED) ignore this problem above and help me with this other problem, you can:
  I have another problem, one that I have had since I have this PC. I lose my Internet connection randomly without any reason, this happens especially when I play multiplayer games. The router still works, there is still Internet (in my iPhone, iPad, another PC), but my PC says:
  
  "Network 2".
  "No. Internet access"

  I use the internet cable. The cable is properly connected and I tried to solve the problems, but didn't work.

  So can you please ignore the last problem and help me with this one?

  Thank you in advance!

  Kevin

  System:
  OS: Windows 7 Home Premium
  Graphics card: nVidia GeForce GTX 690
  Processor: Intel Core i7-3960 X
  RAM: 16 GB of RAM

  I have not had the opportunity to try, but if you have access to another machine, you should be able
  do a repair reinstall of Windows by installing your HARD drive on this computer, unless activation
  You can do it on another machine.
  Once you move the HARD drive to your machine things should be fine,
  and if you reactivate Windows it should pose no problems.
  The 'install, upgrade and activate' instance should be people who can check it out.
  Or - if you have another HARD drive install Windows to this as a test (assuming the rest of the machine
  Awake quite a long time to complete the installation :)). If the machine still locks with a clean base
  installation of the material becomes more suspicious.

  You will need to answer a few questions over early to help in the process of elimination.
  Behind closed doors are not uncommon when focusing on a machine with a game, but randomly at any time the camera can come from many things are so difficult to solve.
  -You mentioned beeps. Describe the beeps. Long, short or a combination of both?
  They only happen once?
  The manual of your motherboard has a description of the beep codes? Different BIOS
  Use different codes, but the codes can be found on the web as well.
  -Have you run on the cpu, the gpu and the motherboard temperature monitors?
  -Have you tested the hard drive?
  -Settings of the BIOS to default? Not overclock the cpu or gpu?

  What were the results of the MS fixit is in the links above, and what did the
  FixIt actually do to try to resolve the failures? They were rolling Windows back to front
  you have installed the Windows Update in question?

  Things are running more fluid during boot, boot, that when in Safe Mode?
  Clean boot is useful for finding conflicting startup applications and services, but it does not cover
  programs, you can run after loading Windows.  He could also miss a few things like
  the pilot of Daemon Tools, which is known to cause problems, if you have Daemon tools or
  a similar software installed.
  Is that absolutely nothing else than you did at the time of the Windows update?

  Some of what I read the PSU Chieftek should be a good diet, but the review below
  find a problem with the application of current stable - (turbo Cheiftek 850W series)
  «The voltage drop is very high, unacceptable thing for a PSU 850w which is intended for the high-end systems that require a stable power supply.» Also with more than 80% of the charges, the readings of voltage of 12v lines are far from regulation ATX. Despite the fact that the pc continued to work normally, no one would have a power with this voltage drop. I would like to have the equipment to measure the ripple also. »
  While Chieftek is apparently made by the mfg even as some brands that are more
  known in my part of the world (Oz), an unstable current is often caused by markets good components (coils and capacitors), but even a good quality diet (any PC component) may be faulty from the start, and camera are a common symptom of a failed power.
  If the power supply was the problem and the system hangs even when not under duress, you do
  have a very real need to fear a crash while performing a repair reinstall. Full backup of data
  would be advised.
  .

• New installation of windows server 2008r2 gives me this activation error: 0x8007007B - "the file name, directory name or volume label syntax is incorrect. Can someone help me to activate?

  Windows server 2008r2
  No role
  Dcpromo has NOT been executed
  new installation

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Windows Forums. Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• New installation of Windows XP Pro! I can't update.

  I reformatted and installed XP Pro on a new construction. My drive is quite old. There the SP2 and Internet Explorer 6. When I try to update, I get error 0 x 80240036. I can't even install the Nvidia graphics driver because she needs .net framework. Its been two days of * trying to solve this problem. Any ideas on what I should do? Remember that it is a new installation.

  Read the steps to take before you install Windows XP Service Pack 3 (especially the # 4: turn off you're a / v)

  If you have an AMD processor, see http://www.microsoft.com/en-us/download/details.aspx?id=23751

  Download and install SP3--> http://www.microsoft.com/en-us/download/details.aspx?id=24

  Download and install IE 8--> http://www.microsoft.com/en-us/download/internet-explorer-8-details.aspx

  Return to Windows Update

• Installation of Windows 7 freezes. How di I install Windows 7 by starting the disk?

  installation and initialization via Windows 7

  I have windows vista on my laptop. and I want to format my drive and install windows 7. I bought the dvd... my question is. I can install windows 7 by going into the bios and to start the dvd. because when I go to normal mode of windows my computer freeze after a short while and installation stop... I backed up my data on an external hard drive... Please answer this as soon as possible.another question is how to install windows 7 by starting, if I can do it? What are the steps or is there a guide that I could mention. my dvd I bought gives me instructions on installation by switching to normal mode.

  Thank you

  Avinash vyas

  Hello

  You have a full version of Windows 7 or a version upgrade? Or the other can be used to perform
  a clean install (format and install that removes the Vista, the programs and data).

  How can I perform a clean Installation of Windows?
  http://pcsupport.about.com/od/OperatingSystems/f/clean-install-Windows.htm

  How to do a clean install with Windows 7, this wipes ALL programs and data on
  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to do a Custom Installation of Windows 7
  http://www.SevenForums.com/tutorials/20146-custom-install-Windows-7-a.html

  How to do a clean install with a Windows 7 upgrade Version
  http://www.SevenForums.com/tutorials/31402-clean-install-upgrade-Windows-7-version.html

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">