all mappings completed, but work in "busy" status

Similar Questions

• I use iMessage to the text of my Macbook. For some reason, it will not let me send a text message to a particular group (everyone has iMessage/iPhones) to my computer, but works well on my iPhone. All messages always appear on my Macbook iMessa

  I use iMessage to the text of my Macbook. For some reason, it will not let me send a text message to a particular group (everyone has iMessage/iPhones) to my computer, but works well on my iPhone. All messages always appear on my Macbook iMessage, but when I click in the conversation, no text box for me to write as he does with everyone. It's driving me crazy. How should I do? The two contacts are in my address book and identified on my computer but I can't their message from my computer and have to keep spending on my phone to text their return. Their new messages are always also highlighted on my computer. In the photo I've included, you can see there is no text box for the text of the group with "Franny, dad."

  

  Thanks for any help!

  What happens if you start a new conversation with Franny & Dad from the IOW computer do not try to "catch" the conversation

  Click on new message and put their names in there

  If this does not work - remove the wire from the Mac and try again

• I have rebuilt my laptop Gateway MX6625, did not drive recovery, is went to the gateway web site, all the drivers have worked except the multimedia sound. The gateway was no help, they told her, but the there does not work

  I have rebuilt my laptop Gateway MX6625, did not drive recovery, is went to the gateway web site, all the drivers have worked except the multimedia sound. The gateway was no help, they told her, but the there does not work

  Hello JesusVigo,

  Thank you for visiting the Microsoft answers community.

  Have you tried to use the disk of Windows XP, or Windows Update running default drivers to search for best driver for your sound card?

  Also, I found only 1 driver on your system gateway Web site is located here.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• just has got rid of the virus and responsible for all the disks but given the wifi does not work

  WiFi doesn't work do not

  just has got rid of the virus and responsible for all the disks but given the wifi does not work

  Hello

  Check with the system manufacturer or the actual WiFi device manufacturer and ask in their forums (if any)
  for problems known.

  Actually, try updating your driver:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• my hp 4100 series all-in-one does not work on my windows 7 but work fine on my xp computer why

  my HP 4100 Series 4100 all-in-one DOES not work on my windows 7... but worked fine on my xp computer and a ruin my driver not compatible?

  You must download and install the appropriate drivers for your version of Win7 from this link.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=29118&prodTypeId=18972&prodSeriesId=83436&cc=us

  I hope this helps.

• I get error 1 I've tried all the solutions, but none of them works. What can I do?

  Hi, I have a HP Windows will not let me install the creative cloud. I get error 1 I've tried all the solutions, but none of them works. What can I do?

  HI Isa,.

  Please try the steps mentioned in the link below:

  Error "Unable to install" received when installing Adobe Creative Cloud desktop application

  Let us know if this helps!

• My creative cloud no longer works. When I try to reinstall, I get the message "AAM cannot initialize. I tried all the instructions but it still does not work. Robert

  My creative cloud no longer works. When I try to reinstall, I get the message "AAM cannot initialize. I tried all the instructions but it still does not work. Robert

  Could you please mention the operating system?

• I went through all the steps to download the trial version of Adobe Photoshop elements 13. It is said download completed, but nothing happened then prompting to launch the program. I checked the finder (MAC OS) and could not find. Don't have Adobe downloa

  I went through all the steps to download the trial version of Adobe Photoshop elements 13. It is said download completed, but nothing happened then prompting to launch the program. I checked the finder (MAC OS) and could not find. Don't have Adobe download wizard. How to open and run the program?

  Jediii please see Photoshop elements 13 full download. What to do next? where this topic was just discussed.

• Silent allways orange but work and volume/tone are not displayed.

  I have a 1100-DV8T running win7 pro.  Product #vf836av.  Once Microsoft fixed a few issues that I noticed that the Mute button is still orange but works correctly.  Settings mute, volume and tone do not appear on the screen when you use the touch buttons which makes it difficult to know what is happening.  I guess that's probably a driver issue since it occurred when the pilot for a hard drive problem.  I already tried a hard reset with no luck.   Any suggestion?  Any help would be appreciated.

  Hello

  Regarding the status of the mute LED, try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48945.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When finished, restart the laptop.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  On-screen display for volume etc is provided by HP MediaSmart SmartMenu which can be downloaded from the following link.

  http://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48552.exe

  Once the installation is complete, you will need to restart the laptop.

  Kind regards

  DP - K

• Media Player has completely stopped working

  My media player has completely stopped working

  System-Windows 7

  All media is still listed, but nothing is available.

  When I try to start, the following message appears.

  "running the server failed.

  Hello

  Have you recently installed another player?

  Make sure that WMP is not already loaded. Right-click on taskbar - Task Manager - tab - process
  Search for wmplayer.exe - to COMPLETE the PROCESS in this regard.

  -------------------------------------------------

  Make sure that Windows Media Player is on.

  How to enable or disable the features of Windows 7
  http://www.SevenForums.com/tutorials/5023-Windows-features-turn-off.html

  How to uninstall and re-install Windows Media Player 12 (WMP12) in Windows 7
  http://www.mydigitallife.info/how-to-uninstall-and-re-install-Windows-Media-Player-12-WMP12-in-Windows-7/

  -------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ---------------------------------------------------------------

  Do this to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.

  -----------------------------------------------------------------

  Microsoft Fixit Center
  https://Support2.Microsoft.com/FixIt/en-us?WA=wsignin1.0

  Support for technical problems of Windows Media Player
  http://support.Microsoft.com/ph/7763#TAB0

  Troubleshooting Windows Media Player Guide
  http://www.SevenForums.com/tutorials/57348-Windows-Media-Player-troubleshooting-guide.html?LTR=W

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

  .

• (the backup completed, but some files were skipped--(0 x 80070003)) & (0 x 80070002))-Please help!

  Hey everybody...

  I tried for two days back my 64 bit Windows 7 system.  Whenever I do, I get the following messages saying the "backup completed, but some files were skipped.  (I get two error codes (0 x 80070003)) & (0 x 80070002))

  This is the description that is displayed in Notepad after the backup is performed:

  Backup has encountered a problem during backup of the file C:\Windows\System32\config\systemprofile\iJamez\Pics & Vids\Internal storage. Error: (System does not find the specified path. (0 x 80070003))

  Backup has encountered a problem during backup of the file C:\Windows\System32\config\systemprofile\iJamez\Pics & Vids. Error: (System does not find the specified path. (0 x 80070003))

  Backup has encountered a problem during backup of the C:\Users\James\Desktop\Contacts file. Error: (the system cannot find the specified file. (0 x 80070002))

  the iJamez folder is located under the folder James which is on my desk at the top of the page, that I him have also stored in my external hard drive... the order goes like this:

  PC: C:\James/iJamez/Pics & Vids

  Outer: D:\iJamez/Pics & Vids

  + Pictures and videos is I have sync it with my iPhone.

  The last line of the error is in what regards the Contacts... I installed Outlook Express and I noticed that the Contacts folder has been installed on my desktop and I deleted because I don't need.

  Is someone can you please help me understand this... It makes me crazy!

  Thanks in advance to all!

  James
  E-mail address is removed from the privacy * (please email if you directly want to advise me on how to fix this isssue)

  I SOLVED THE PROBLEM...

  What I had to do, is create a folder named "iJamez" inside:

  C:\Windows\System32\config\systemprofile

  Once I created the folder iJamez inside (see above) I then created another folder inside iJamez called Pics & Vids. Once all of these files, I did my backup worked fine. He didn't ignore any files at all.

  But of course, my only question is, why the hell did I have to create these folders in the first place? Why in the world the Vids & photos that I sync with my iPhone would have something to do with a full backup?

  I do not understand why, I am just happy it worked.

  Can anyone shed some light on why this took place?

  Thank you.

• BlackBerry smartphones can not access email POP3 with Blackberry, but works fine in other e-mail clients

  My company recently moved hosting of emails to a new dedicated server (with Lunarpages - www.lunarpages.com).

  We have normal, ordinary POP3 e-mail accounts that is accessible through any regular desktop mail client (Outlook Express, Thunderbird, etc.)

  I put one of these accounts successfully on my Torch 9800 last week and had no problem. Yesterday I deleted this account in order to demonstrate to a co-worker, how to add a new account, and I could not add a new account by using the same parameters since.

  This isn't a problem of carrier or to a particular device (tried on several media and several BB devices, all without success), but it's a specific problem Blackberry. It is limited to my dedicated server as well, not all servers hosted by Lunarpages.

  I know I put the correct settings in the account name, e-mail server, etc, because this worked on my flashlight and the same settings continue to work correctly with other phones and email clients.

  I suspect that there is some kind of disagreement between my server and BIS. Can anyone suggest what the problem could be here still, or even who I should talk to? My service provider is unable to help because it is not specific to them and my Lunarpages server provider is completely baffled. Please, any suggestions are welcome!

  Problem solved.

  If someone needs to know, http://btsc.webapps.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB11036 describes the IP addresses that must be unlocked in order for the BIS interact with a mail server.

  However, DO NOT included on this list has been 74.82.80.0/24, another server RIM, I discovered this morning had been blocked by my server. This list has been updated end of 2011, so I guess they changed things since then. Anyway, once I unlocked which will, everything works now.

• BlackBerry Smartphones have wifi but no IP address (Status: IP address is no longer valid)

  Dear experts,

  I can connect my Pearl 9100 to my home Wi - Fi network, but I can't connect to the internet.  For example, when I run the browser, I get the message «Unable to connet to the Internet...» ».

  I can see on my router that Pearl has been assigned an IP address DHCP vi (just as one would expect).

  Of "manage connections / Options Wi - Fi profiles registered Wi - Fi to select my profile / tools WiFi / Wi - Fi Diagnostics ' I see that" Local IP address: "is empty and that"status: IP address is no longer valid"

  I assume something is wrong on the bead, because it does not accept the TCP/IP configuration served to him by my server DHCP (my wireless router).

  Someone at - it recommendations for helping me solve this problem?

  Here are a few other details to consider:

  All other wireless devices work on my home Wi - Fi network, including a Blackberry Bold 9780 running OS 6.

  My Pearl 9100 has OS v.5.0.0.748.  This is an operating system updated Blackberry specific to my carrier (Bell), of the 5.0.0.604 OS, which came on the device.

  I don't have a data plan on my Blackberry (you may think it strange, but well, it's the way I want it).  The Bold 9780 which has connected to my home Wi - Fi network has either a data plan.  The absence of a data plan should not be a problem because all I need an Internet connection for is the occasional use of the browser when a Wi - Fi connection is available for free.

  Thank you in advance for any advice, tips or pointers.

  Hey - I found the solution:

  Options / Mobile Network / Data Services - change from 'OFF' to 'ON '.

  I guess I was mistaken in thinking that "Data Services" should only be enabled if you have a data plan.

  Maybe this will help you more...

• Question: How to make data Disqualification Purge project after completing a work?

  Hi all

  I know how manually purge the data of the project by clicking on

  but I wonder if there is a way to Purge project data of the Disqualification after completing a work in itself.

  Thanks in advance for any response.

  Note that Disqualification 11 g, just released, includes the ability to create policy rules for the purge of the data where the jobs are executed with labels of execution.

  This does not include the data produced during the execution of the works interactively to the Director (i.e. development and test jobs).

• MacBook air crashes, I'm unable to open all the applications but Safari.

  MacBook air crashes, I'm unable to open all the applications but Safari. I can still access the app store to download some antivirus software.  I downloaded AVG hoping it might cure the problem, unfortunately it made it worse.  I got this macbook for about 3 years and I have not had problems.  I recently opened safari on another user and he came with a message saying that you have now received a virus.  I don't know what to do, or how I can fix this problem.  The office is constantly freezing as well, I'm out of options!

  Determine if you can start up your Mac in 'safe' Mode. Read how here: OS X El Capitan: safe mode. If you find that the document confusing or difficult to follow, please write back for instructions.

  After you have determined how your Mac works in 'Safe' Mode, restart normally.

  Regarding your other concerns:

  I recently opened safari on another user and he came with a message saying that you have now received a virus.

  These messages are false. It is a very common scam. Read about it here: Phony 'technical support' / 'ransomware' popups and web pages

  
  

  I downloaded AVG hoping it might cure the problem, unfortunately it made it worse.

  It is to be expected. Don't waste your time with things. "AVG" can be particularly difficult to uninstall, a fact that I learned to evaluate myself. The problem is that its uninstall instructions do not work. I got by deletion of the Mac and restore its contents from a Time Machine backup. You have a backup?