All my ink cartridges are full and installed the printer not print one color. Help?
Photosmart C6380 is a color print not all full. Can anyone help?
Perform the print cartridge cleaning procedure.
Tags: HP Printers
Similar Questions
-
Office Jet 6500 has more do not print black? said of cartridges are full and installed
all ideas
Hi lharm,
Try to run the cleanup utility to print up to 3 times head. To do this, tap the arrow to the right on the printer screen, select configuration / Tools / clean print head. Who help me?
-
I'm trying to burn a (iso file), but keep a "transcoding error". I downloand and install the latest updates. Can anyone help?
Hi Slim,
First of all thank you very much for your help.
I now sort the problem using the AVCHD tab. I can't that assume that because the original video is of high quality in the program would not burn an iso file to DVD to address normal. I also had to change the setting from 'Type' to "ISO Image (8.5 GB)" because it would not 4.7 GB.
Kind regards
Dave
-
I can't go to my printer. It will not recognize the ink cartridges are full!
My epson 7400 has not been used for 6 months. I cleaned and aligned the nozzles and it used 2 full cartridges. I installed new ink cartridges, and he says they are empty. Now none of the buttons work, it does not seem to recognize all commands. What should I do?
Hello
Turn the printer off
Unplug the printer from the computer and the wall outlet
Reinstall the cartridges
Support all the ink cartridges until they snap into place to make sure that they are well housed
Close the cartridge cover and push it down until it snaps
Close the scanner
Press on the Stop button to start loading of ink. It takes about 2 minutes.
When the the light stops flashing and remains on, the ink load is complete
Caution: Never turn off the Epson Stylus CX while ink is in charge or you'll be wasting ink.
If the ink light flashes, press on the Stop button and lower all the cartridges safely
Manually clean the print heads
Plug the printer into the wall outlet and the computer. Turn it on and try printing again.
-
performed a test page to the printer is only printing in blue ink. printer is running on Windows 8, please let know us if I need to re install or download updates
Hi Colleen48,
I see that you are having problems with your printer. I have a few questions.
When you print the test page only blue ink prints?
When you print only blue ink is printing?
-
Used this printer for months without problem until he ran out of color ink. Buy genuine HP color ink on amazon and replaced the empty color ink. Installed the latest driver. Printer seems to work fine except the rest blank page. HP Print and Scan Doctor 4.9 finds no errors, no problem. Cleaning print head. Aligned printhead printed normal test result on the page. Results of tests on white page. Yet performance printer continues to give green checkmarks on all issues. No error found. I followed the video instructions from HP customer support, but the problem persists. http://support.HP.com/us-en/product/HP-DeskJet-1000-Printer-series---J110/4066042/model/4066376/docu...
Given that you've tried the HP web site, try these videos Youtube here.
https://www.YouTube.com/results?search_query=DeskJet+1000+print+head
Find out more if necessary. If no joy, your printer is toast.
-
Something blue prints as a pink/purple color. Recently replaced the Cyan cartridge. No other cartridge is the replacement level yet.
Ideas?
Hi @KFDLou,
Please try these steps and getting back to me.
As indicated in the document "If there are still defects on the page after the print head has been cleaned once, go to solution to replace one or two print heads."
Solution 6: replace one or two print headsIf you have done all the troubleshooting steps and you are still experiencing a problem, replace the printhead. -
My printer was working fine with Windows 7 Home Edition, then it stopped, magenta and yellow print. Ink tanks are full. What bad past and how to fix it?
If you are sure that the ink cartridges are full, then try to re-seats and cleaning the heads - http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=8783
If all goes well. -
My printer epson stylus cx7800 blank paper prints. Cartridges are full
It is as if printing correctly, however the documents come out in white! cartridges are full and everythings shows it should work.
My guess would be that you need to clean the heads.
John
-
Windows is config not download and install the drivers on windows 7
Original title: USING WINDOWS UPDATE
Windows is config not download and install the drivers on windows 7 please help.
[Tip] Customize the Installation of the driver software from Windows Update device
hope that helps.
-
Cannot install the printer HP officejet 4500 Windows 7
Original title: HP officejet 4500 printer is not able to install successfully on windows 7 64 bit ver
Good day to all,
I have a printer above that connects port router thro is not able to install successfuuly using portable computers that are running windows 7 64 bit ver, uninstalled hp program and delele registry still same.i have try vista laptop with a utp cable from office windows xp and laptop wireless with the computer it works fine. Pls help and your promt response is very much appreciated.
Moved from Vista devices and drivers Forum.
Hi Benoit,.
Good day to you and thank you for posting your query in Microsoft Community.
I understand that you are unable to install the printer on Windows 7. I'll be happy to help you with your query. However, let me ask you a few questions;
- What happens when you try to install the printer?
- You receive an error message? If Yes, what is the exact full error message?
- You try to install the printer for the first time to Windows 7?
- Remember to make no change in the computer before the show, if it was installed before?
- What is the brand and model of the computer?
- You are able to install the printer to Windows 7 via USB cable? If not, what happens when you connect the printer (via USB) to Windows 7?
There could be various reasons that you can not install the printer. There could be a possibility if you try to connected the printer for the first time, you need the printer software. If it has been installed in the past, it could be any conflict of third party software. Let's try the methods below and check.
Method 1: Download and install the latest software of the printer from the printer manufacturer's website and check.
Enter the exact model and series type the following link and install the printer software.
Method 2: There are several ways to connect a printer to your computer. An option that you choose depends on the device itself, and whether you're at home or at the office.
Please see: install a printer
Method 3: If the printer has been installed in the past, perform the clean boot in order to avoid any conflict of third party software and check.
Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
How to perform a clean boot in Windows
Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.
From now on, try the methods above and let us know the result as well as the answers to the questions. We will be happy to help you further.
-
Hello
I ALREADY HAVE A PRINTER OF HP PHOTOSMART MORE, BUT I LOST MY CD FOR INSTALLING SOFTWARE. I JUST ACCUIRED A DIFFERENT MAC AND I WANT TO INSTALL THE PRINTER ON THIS COMPUTER.
WHAT CAN I DO TO INSTALL IT?
Kind regards
JAIME
Hi Jaime,
What you can do is to go on the media and the area of drivers from the Hp site by following the link http://www8.hp.com/us/en/support-drivers.html
-Just type in the Version of the Photosmart you have and who follow a Version of MAC OS that you use
-you want to do from the computer that you are wanting to install the printer on.
Just download the driver and install and that should help you to get this printer set up on this computer as if it was the drive itself
-
Cannot install the printer. The print processor is not (winprint)
According to the scenario:
DC1 in site 1 runs Windows Server 2012 Standard, printing and Document services are installed. Many printers are installed and work.
DC2 in site 2 is running Windows Server 2008 R2 Standard 64-bit, printing and Document services are installed. I want to install printers that users in this site must be able to print with.
Same printer exist in both sites. In Site 1 on DC1, I was able to properly install the driver, add the port and installed the printer.
I took the same driver DC2 and installed. I created the Port with the IP address of the printer but when I finish the Add Printer Wizard I get an error message saying: cannot install the printer. There is no winprint print processor.
I was looking in many forums and before you ask, the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors\winprint key does not exist on two domain controllers (tried to create thispost), but makes no difference.
The winprint.dll file does not exist in the C:\Windows\System32\spool\prtprocs\w32x86 directory on any of the machines, but is located under C:\Windows\System32\spool\prtprocs\x64 on the two machines.
There seems to be no difference in configuration between these two machines, but as I mentioned abov, on DC1, I'm able to add the printer, and I'm not on DC2.
Is there anything I can do to get the job to the printer on DC2?
(And for those who ask why install on a domain controller, there is no member server in this site).
Thank you
Hello Josi,
Thanks for posting your question on the Microsoft community.
The question will be better suited to the audience of professionals on the TechNet forums.
I would recommend posting your query in the TechNet forums.
TechNet Forum
https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServerThank you
-
Problem installing the printer.
I have a range of printers Laserjet 2055dn on 64-bit Windows 7 and the printer is connected to USB. Windows will install the device via PnP, however when the printer is installed and try to print something from her nothing happens. When download us the PCL and Post Script of the HP website driver and install the printer manually, after installs the printer, the printer does not take place in devices and printers even you the HP installer says that the printer has been installed. When we try to manually install the drivers via material inherited from device manager installation and browse for the drivers, we get an invalid memory address allocation. I guess the next thing we could try, it is using a different USB cable?
Thank you
Hello
To get your question more exposure, I suggest you post in the trade forums since your product is a commercial product. You can do it at business forums - printers - LaserJet.
Enjoy your day!
-
CP1215 reports that all of the color ink cartridges are empty
HP CP1215 reports that all of the color ink cartridges are empty, but they were rarely used, the BLACK toner then indicates 72%, all three color inks report 0%.
Hello
Thanks for the post. It's weird, there's a way to go beyond this message, I have included a link below with the explanation and why this happens. Good luck!
Maybe you are looking for
-
Local keychain items pop ups after the connection
Using a MacBook Pro 15 "retina with MacOS Sierra, but this has also happened with El Capitan. If I restart, or if the locks on the computer for a long time (i.e. at night), and I have to log into it, boxes appear in Finder telling me that "local keyc
-
Trusteer report running on the computer, but FF v 30.0 for Mac OS won't load so I can't access our bank account. Support of Trusteer continues to tell me it is a browser problem.Thank you
-
Hello, I am trying to scan documents / photos to email (s) using the 5370 c scanner. I help with XP, OS, my PC is custom build, scanner is connected through the USB port, I download all drivers and software updates. When I try to scan any document t
-
Hello everyone, I'm here because im making my tesis, at the moment, im having problems, receives a hydrometer by VISA, the problem is that we need to split the information as it comes to us this way: Hydrometer---> Visa---> Labview---> T = 30,42 C =
-
Go us to the wall of fire and try to stop there?