All trouble with Windows 7

Similar Questions

• Latitide D810 - lost all sound with Windows 7

  Greetings!

  I recently installed Windows 7 Professional on my Dell Latitude D810. After installation, I've lost all the audio features. My volume control in the Quick Launch bar States, "no Audio output device is installed". I ran the "problems of detection" to try and fix the drivers, but it wasn't able to fix it.

  My next step is to check the drivers of Dell and downloads site and they do not have a driver for my computer with Windows 7. However, I have read on other sites that people have had any audio problems with installing Windows 7 on their Latitude D810s. Others have claimed to have had problems, but have been able to find the drivers for their audio problems.

  Through various websites and download, I tried the following driver executables: D810_A05.exe, R99254.exe and S1wua01i.exe. It's audio drivers I found for XP and Vista, but they no longer work.

  Does anyone else have other recommendations in pilot? Or links to other drivers, I can at least try?

  At this point, anything would be helpful! A lot of satisfaction and thanks in advance...

  See if it works:

  Download driver Sigmatel R99254. Unzip it but cancel the installation process. (Skip this step if you still have this driver).
  It will unzip the files and store them in a folder on the hard disk to c:\Dell\drivers\R99254, and this folder will be a subfolder named WDM.

  Open Device Manager and expand system down devices. Locate the PCI Device with one? next to it (or if it is not there, then look for "Multimedia Audio Controller"). Go to properties and select Update driver. Select to manually locate the driver and let Windows not seek.
  Go to c:\Dell\drivers\R99254\WDM

  With a bit of luck, it should detect new hardware, and one of them should be the Sigmatel.

• XP reboot, trouble with windows system root 32/ntoskrnl.exe

  How do I reboot XP, when my keyboard seems to be does not work either. Replace the keyboard? Is a a working XP wireless work?

  Well, I looked up a1410a at hp, but they only had the a1410n model that I could see.  but the last letter in the model number may be due to only a minor difference between models.

  in any case, it is regrettable that hp.com makes it very difficult to find answers and you were essentially limited to the use of their system recovery / factory restore procedure.  However, this is not what need you.

  Instead, here is your bios access information:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bph07110&tmp_task=useCategory&LC=en&DLC=en&cc=us&lang=en&product=1841799

  again, once inside the bios menu, see if the keyboard helps you maneuver autour. try changing the date and time.   If you have some basic features of the kb, it is to say the arrow keys, number and letter work, then your kb is basically ok.

  to exit the bios, you can find options to close or end the session of the bios.  Choose the one that says, close and ignore the changes.  the bios will then close with all stats unchanged original.

  with respect to the model of your keyboard, it seems that you have a version of media multi with a ps2.

  the improvements offered by this keyboard requires a specialized hardware hp keyboard driver.  but this pilot and improvements are used by windows, when it runs.

  the pilot and the improvements are not needed during the boot process.

  either incidentally, adapter, to which I referred is a simple adapter that connects to the ps2 connector and converts it into a USB port.  It is relatively cheap and can be purchased at computer stores.

  http://www.bing.com/search?q=PS2%20To%20usb%20keyboard%20adapter&PQ=PS2%20To%20usb&SP=3&QS=as&SK=AS2&SC=8-10&form=BB07SS&PC=BB07

  However, instead of buying a plug adapter a specialty multi media keyboard, my suggestion is to buy a cheap keyboard plain / ordinary instead.

  a regular keyboard to replace your multi media Ko if it is defective.  the regular keyboard can also be used on other computers and laptops as a backup.

  Remember that ps2 keyboards and others comes with usb Sockets.   for now, you must Ko ps2 for use on your CV and if the box is delivered with a ps2 usb adapter, then, it is an added bonus.

• All programs try to open with Windows Media Player

  Original title: programs openingwith a file... ??

  All the programes not open to its default application its opening with a single application that is to say, the Windows media player. If any of my files opens his will all windows media player and saying: cannot open whichmis obvious. So, how do I associate all default programs... ??

  for example: if I try to open live messnger or any other messenfer or Internet explore these all open with windows media player which is makin not run the application. So, how I assosiate to hide by default... ???

  I found the answer... .thr was a problem with my .reg files .exe value... then I had to restore it to default...!
  NW its works well... ... Thank God!

• Problems of replacement of Windows 8 with Windows 7 on a laptop HP 2000-bf69WM

  I just bought a laptop HP 2000 - bf69WM during the Black Friday at Wal-Mart last night sale. This morning, I pulled and he went right to the trying to repair right out of the box. I managed to get him to stop and I went to system restore and managed to get it started. Needless to say, I'm not at all impressed with Windows 8. I've heard of all the problems users have had with it. I tried to install Windows 7 on it, but it will not be installed. The BIOS shows Windows 8 as the operating system. How can I dump this CRAP of Windows 8 and install Windows 7 on this computer. It is not a bad machine, I wouldn't get rid of him during another screw up Microsoft.

  try to remove the disc of windows 7 on reboot and put it back in after the windows 7 logo too good luck finding the network always in trouble with drivers.

• Problems with Windows 7 backup error "set up the image of the backup task is corrupted or tampered with (0 X 80041321)

  * Original title: trouble with Windows 7 backup

  I upgraded to win 10 and found out, that it was inappropriate of me, came back to Win 7. Tried to run backup after returning and received this message.

  "set up backup".

  The task image is damaged or tampered with

  (0 X 80041321)"

  Hello Michael,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur because of corrupted backup settings.

  Please refer to the suggestions of Hamidou K replied 27 December 2010 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-backup-error-0x80041321/d0ed6e45-76a5-4B50-a094-02eb12d26c8b

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Have the new computer with Windows 7, Palm m105 and 4.1.4 new Office of palm, trying to synchronize correctly.

  With the new computer, I had to add a converter Series USB cradle hot synch. I spent most of the day trying to get the new converter series to be recognized so that synchronization can be performed. It will now sync when I put the Palm in the cradle. After installing 4.1.4 in order to get it all to work, I took a recent version of historicalbackup of my palmOne program files folder in the Program folder files and replace the entire folder with my historical version. When I open the software desktop, all my data seem to be there, except that a lot of my previous entries in the calendar are now three hours earlier that they used to be and some are moved to a day. My Palm keeps the correct information, but synchronize custom crush data from the office with your handheld data produces no change, even though he went through a time synchronization process. I have also an old computer that has a copy of full backup of everything and the palm software in that one works correctly, then what should I do to correct the data in my calendar on my new laptop?

  Thanks, lucky me, I had no registry after files talk to the guy at my store of the computer support and to find out how long it would take for them to support me on this company.   I did another installation of my software, and this time first of all imported data in the calendar.   It was enough to get the palm m105 sync with the computer and a couple of sync later (with the handle of the substitution of office), the victory was mine.   The data is now properly input and not duplicate!  So, it looks like to annoy a little, you can get this all works with Windows 7.   I'll post an update after a few weeks of experience with the Palm on this computer.

  Thanks for your help cygnusX1.   And let the folks at palm know that there is still a lot of pda users here who would like to be able to upgrade to pda better, not smartphones.    I don't know what I'll do once my m105 bites the dust.    If you have any ideas as to what improvements to consider in the future, I'm all ears.

• HP Photosmart C7280 all in one installation with windows 8.1 problems

  Hello

  I have a HP Photosmart C7280 all in one printer which worked very well on wifi with Windows 8. A few days ago I got the prompt to upgrade to 8.1. Subsequently the printer would not work and I got prompt/warning message to re - install the printer software. And I went to the control panel and deleted all the old HP software, tried to re - install the last being on the HP site... nothing will do.

  I tried to do a number of ways - manual download, download the HP software that determines what software is required, then it downloads for you...

  It seems to start unpacking all right, but then gets stuck on "Checking system" and never progresses to something else. Help!

  Hello Cam77,

  Welcome to the Forums of HP's Support. I see that you're having trouble installing your Photosmart C7280 printer after upgrading your computer to Windows 8.1.

  I have included the Windows 8: the progress bar on the Software Installation stops or stalls document. It will guide you in the steps to get the installed printer.

  Please let me know if you are having difficulties while doing the above. If you do, please let me know at what stage things are ugly and said error messages. Please also indicate how you have the connected printer (USB cable, ethernet or wireless). Thank you.

• Windows 10. installed iTunes version 12.4.0.119. I have several iTunes libraries. On most of them display-> ' display as ' does not show the grid option. A library of fact.  It's all music, with no video media. By default seems to be a list that is unc

  Windows 10. installed iTunes version 12.4.0.119. I have several iTunes libraries. On most of them display-> ' display as ' does not show the grid option. A library of fact.  It's all music, with no video media. By default seems to be a list that is unchangeable.

  Select the sidebar if hidden. View options > view as may depend on which of the options for the song, artist, album, etc. are selected in the sidebar.

  TT2

• HP deskjet 2130 all in a ser: can hp office jet 2130 in one work with windows 10

  can this printer also works with windows 10 or not

  Khan-1234

  Hello;
  
  Let me welcome you on the HP forums!
  
  To answer your question - YES - but you must use the HP software and drivers, not one provided by Microsoft.

  Here are the drivers and software for this printer page: http://support.hp.com/us-en/drivers/selfservice/HP-DeskJet-2130-All-in-One-Printer-series/7174550/model/7174551

  You must download and install full feature software and drivers for the printer.

  Then unplug the printer and install the software.

  Do reconnect the printer until the installation program invited to do so.

  Once the installation is complete, restart.

  You should then be able to use your printer in Win10.

  Good luck

• My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit.

  My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit. I can copy and print only. Thank you.

  Hello

  Is the printer connected to your PC by USB or network?

  Using the USB connection, you can scan using Windows Fax and Scan software built into your operating system.

  Scanning over a network connection unfortunately supported on Windows7 32 bit only, as you can find listed in the section about network scanning below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02539136#A2

  Kind regards

  Shlomi

• Is the Officejet 7612 A3 e-all-in-one compatible with windows 10

  Hi, I am looking to buy the Officejet 7612 A3 e-all-in-one and I was wondering if it is compatible with Windows 10. Thanks for your help

  Yes

• Photosmart C4280 all-in-one: HP Photosmart C4280 Scan features do not work with Windows 10

  S s s s today, there is no drivers for printing or scanning of the utilities on the HP site. I was able to get to join the TRIOUX printer, butttttnosaninfunctions work with the push button on the machine. Also, because I lost the original CD that came with it, I can't scan utilities to work. I don't know that the same CD would work with Windows 10. In any case, HP will be an upgrade of Windows 10 for this printer include the scanning of the functions? Thank you

  Hey @Rong1,

  Welcome to the Forums of HP Support!

  I see you want to use the features of printing and scanning of your HP Photosmart C4280 all-in-One Printer on your computer Windows 10. I want to help you with this today. I'm happy to announce that the full feature software and drivers are available for your printer!  Just pilots have not yet been added under Windows 10 drop-down list on our Web site. However, I will you link to the driver package to install your printer. Please follow the steps below.

  If you use a USB connection between your computer and the printer please unplug this cable now.

  Step 1: Remove the printer:

  We want a clean slate to install your printer on the computer Windows 10. Therefore, I will you ensure that no trace of your HP Photosmart camera does not currently installed on your computer.

  1. click on the Start button

  

  2. type programs and features. If a search does not start automatically, you will need to type programs and features in the area of "Ask Me anything".

  3. click on programs and features to launch the window.

  4. in programs and features, will populate a list of the programs installed on your computer. Please scroll down and find your Camera HP Photosmart. If you see your HP Photosmart listed, click on it and choose Uninstall.

  5 follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete successfully please close programs and features.

  6. then, click on the menu start of new

  7. this time type devices

  8 click on devices and printers to launch the window.

  

  9. in devices and printers are looking for your Camera HP Photosmart. If you see if if please right click above and choose 'Remove' or 'Remove'.

  10. Once your HP Photosmart camera is like showing in devices and printers please click on any device in the list of Printers once just to highlight. Click the print server properties on top

  

  11. click on the drivers tab

  12. search for your HP Photosmart driver. If the list, please click it and choose delete

  13. Select delete the driver only

  14. Select OK

  15 click apply and OK in the print server properties window.

  16. close devices and printers. Please proceed to the next step.

  Step 2: Install the device:

  1. Please click here to download the full functionality of the software and the driver for your printer
  2. Once the download is complete, follow the prompts on the screen to install your printer
  3. If you use a USB cable connection, leave the disconnected cable until the installation program prompts you to connect

  Once installation is complete, please try printing and scanning.

  Please reply to this message with the result of your installation. Good luck!

• I deleted all the games that come with Windows XP including Solitaire. How can I get that back?

  I deleted all the games that come with Windows XP including Solitaire.  How can I get that back?

  Hi andypily1,

  Welcome to the Microsoft Answers community.

  Try the steps one by one and check below.

  STEP 1:
  How do I add or remove games in Windows XP
  http://support.Microsoft.com/kb/307768
   
  
  STEP 2:
  In most cases if the games are deleted from the computer files will remain on the computer.

  I suggest that you are looking for game files in the system32 folder.

  Later, click on Start menu click on run and type c:\\windows\system32 in the following search of the window for the file of games like free cell. If you get the files in the system32 folder then copy the file to c:\\program files\start menu\ later in the game folder.

  STEP 3:
  If fails it above steps, try a system restore to the point when the game was available on the computer.
   
  See the link below to learn how to perform the system restore.

  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084

  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• How to get the printer laserjet 3015 of all-in-one to work with hp520 touchsmartpc 64-bit with windows 7

  How to get the printer laserjet 3015 of all-in-one to work with hp520 touchsmartpc 64-bit with windows 7

  Hi baldwinj,

  Follow the steps outlined in the document below to install the OS driver in for this printer in Win 7 64 bit.

  HP LaserJet Color LaserJet and products of LaserJet AiO/MFP - install the driver included in the operating system Windows 7 (OS)

  Download drivers and software